Re: [Fwd: Config Network Setting]
Aldo Foot wrote: >On Mon, Sep 29, 2008 at 9:46 AM, <[EMAIL PROTECTED]> wrote: > > >>Aldo Foot wrote: >> >>On Mon, Sep 29, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote: >> >> >>Dear All, >> >>I just found a message for /var/log/messages : >>kernel : udev: renamed network interface eth0 to eth1 >> >>So, how to solve this problem ? >> >> >>In a previous reply you said: >> "For 8139too driver, it is a network interface PCI card >> For r8169 driver, it is attached to the motherboard " >> >>I have seen before that the OS will change the device if you have a PCI and >>a built-in NIC. If you unplug the PCI NIC, the built-in NIC becomes >>eth0. With the >>PCI NIC plugged in, the built-in NIC becomes eth1 and the PCI becomes eth0. >>Try unplugging the PCI NIC to check whether this is the case with your >>machine; take note of the MAC address with the ifconfig command to track >>which one is which. >> >>I have not understood why this happens though. Maybe someone can shed some >>light here. >>~af >> >> >> >>Hello, >> >>Is this problem in FC8 System only ? >>So, have you tried to find doc though the net ? >> >> >> > > >I have not done this and I don't know whether that is accurate. > > >I did some reading. It appears that udev does the device switching. But >if desired, the devices can be tied to a specific mac address. > >See this old thread --notice what they say about /etc/modprobe.conf. >http://www.redhat.com/archives/k12osn/2005-September/msg00354.html > >Read this Debian related page: http://www.debianhelp.co.uk/udev.htm > >I don't now whether the problem is with F8 only. I haven't tried all >the flavors. >~af > > Hello, If disbale the onboard lan and install another INC, then, is there still the problem ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Aldo Foot wrote: >On Mon, Sep 29, 2008 at 9:46 AM, <[EMAIL PROTECTED]> wrote: > > >>Aldo Foot wrote: >> >>On Mon, Sep 29, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote: >> >> >>Dear All, >> >>I just found a message for /var/log/messages : >>kernel : udev: renamed network interface eth0 to eth1 >> >>So, how to solve this problem ? >> >> >>In a previous reply you said: >> "For 8139too driver, it is a network interface PCI card >> For r8169 driver, it is attached to the motherboard " >> >>I have seen before that the OS will change the device if you have a PCI and >>a built-in NIC. If you unplug the PCI NIC, the built-in NIC becomes >>eth0. With the >>PCI NIC plugged in, the built-in NIC becomes eth1 and the PCI becomes eth0. >>Try unplugging the PCI NIC to check whether this is the case with your >>machine; take note of the MAC address with the ifconfig command to track >>which one is which. >> >>I have not understood why this happens though. Maybe someone can shed some >>light here. >>~af >> >> >> >>Hello, >> >>Is this problem in FC8 System only ? >>So, have you tried to find doc though the net ? >> >> >> > > >I have not done this and I don't know whether that is accurate. > > >I did some reading. It appears that udev does the device switching. But >if desired, the devices can be tied to a specific mac address. > >See this old thread --notice what they say about /etc/modprobe.conf. >http://www.redhat.com/archives/k12osn/2005-September/msg00354.html > >Read this Debian related page: http://www.debianhelp.co.uk/udev.htm > >I don't now whether the problem is with F8 only. I haven't tried all >the flavors. >~af > > Hello, How can we disable the udev for switching the device with FC8 System ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Mon, Sep 29, 2008 at 9:46 AM, <[EMAIL PROTECTED]> wrote: > > > Aldo Foot wrote: > > On Mon, Sep 29, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote: > > > Dear All, > > I just found a message for /var/log/messages : > kernel : udev: renamed network interface eth0 to eth1 > > So, how to solve this problem ? > > > In a previous reply you said: > "For 8139too driver, it is a network interface PCI card > For r8169 driver, it is attached to the motherboard " > > I have seen before that the OS will change the device if you have a PCI and > a built-in NIC. If you unplug the PCI NIC, the built-in NIC becomes > eth0. With the > PCI NIC plugged in, the built-in NIC becomes eth1 and the PCI becomes eth0. > Try unplugging the PCI NIC to check whether this is the case with your > machine; take note of the MAC address with the ifconfig command to track > which one is which. > > I have not understood why this happens though. Maybe someone can shed some > light here. > ~af > > > > Hello, > > Is this problem in FC8 System only ? > So, have you tried to find doc though the net ? > I have not done this and I don't know whether that is accurate. I did some reading. It appears that udev does the device switching. But if desired, the devices can be tied to a specific mac address. See this old thread --notice what they say about /etc/modprobe.conf. http://www.redhat.com/archives/k12osn/2005-September/msg00354.html Read this Debian related page: http://www.debianhelp.co.uk/udev.htm I don't now whether the problem is with F8 only. I haven't tried all the flavors. ~af -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Aldo Foot wrote: >On Mon, Sep 29, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote: > > >>Dear All, >> >>I just found a message for /var/log/messages : >>kernel : udev: renamed network interface eth0 to eth1 >> >>So, how to solve this problem ? >> >> > >In a previous reply you said: > "For 8139too driver, it is a network interface PCI card > For r8169 driver, it is attached to the motherboard " > >I have seen before that the OS will change the device if you have a PCI and >a built-in NIC. If you unplug the PCI NIC, the built-in NIC becomes >eth0. With the >PCI NIC plugged in, the built-in NIC becomes eth1 and the PCI becomes eth0. >Try unplugging the PCI NIC to check whether this is the case with your >machine; take note of the MAC address with the ifconfig command to track >which one is which. > >I have not understood why this happens though. Maybe someone can shed some >light here. >~af > > > Hello, Is this problem in FC8 System only ? So, have you tried to find doc though the net ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Mon, Sep 29, 2008 at 7:05 AM, <[EMAIL PROTECTED]> wrote: > Dear All, > > I just found a message for /var/log/messages : > kernel : udev: renamed network interface eth0 to eth1 > > So, how to solve this problem ? In a previous reply you said: "For 8139too driver, it is a network interface PCI card For r8169 driver, it is attached to the motherboard " I have seen before that the OS will change the device if you have a PCI and a built-in NIC. If you unplug the PCI NIC, the built-in NIC becomes eth0. With the PCI NIC plugged in, the built-in NIC becomes eth1 and the PCI becomes eth0. Try unplugging the PCI NIC to check whether this is the case with your machine; take note of the MAC address with the ifconfig command to track which one is which. I have not understood why this happens though. Maybe someone can shed some light here. ~af -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Les Mikesell wrote: > [EMAIL PROTECTED] wrote: > >> I just have the problem of "Destination Host Unreachable" from eth1 ( ping to other same network segment internal machine ) as the following setting : [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=no [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.254 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ../network NETWORKING=yes HOSTNAME=svr1 [EMAIL PROTECTED] network-scripts]# So, what is the problem of the current setting ? >>> >>> looks OK except that I would recommend that you use a FQDN >>> in /etc/sysconfig/network and not just a name... i.e. >>> srv1.mynetwork.com >>> >>> obviously /dev/eth0 is not going to be loaded at boot time - but that >>> may be your intentions. >>> >>> >>> BTW, what different between modify ifcfg-eth? and running the tools of "system-config-network" ? >>> >>> shouldn't be any difference as either should modify the >>> same /etc/sysconfig/network-scripts/ifcfg-ethX file >>> >>> system-config-network does have the ability to also edit your 'hosts' >>> file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf) >>> at one session. >>> >>> Craig >>> >>> >>> >> Hello, >> >> How can we enable and verify the Network Interface working with full >> duplex mode ? >> > > Run ethtool to display the current settings. You can also include > ETHTOOL_OPTS in your ifcfg-ethX file to force a setting but if the > other end of the connection is set to autonegotiate both ends must > negotiate - and current equipment usually gets it right. > Dear All, I just found a message for /var/log/messages : kernel : udev: renamed network interface eth0 to eth1 So, how to solve this problem ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Les Mikesell wrote: > [EMAIL PROTECTED] wrote: > >> I just have the problem of "Destination Host Unreachable" from eth1 ( ping to other same network segment internal machine ) as the following setting : [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=no [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.254 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ../network NETWORKING=yes HOSTNAME=svr1 [EMAIL PROTECTED] network-scripts]# So, what is the problem of the current setting ? >>> >>> looks OK except that I would recommend that you use a FQDN >>> in /etc/sysconfig/network and not just a name... i.e. >>> srv1.mynetwork.com >>> >>> obviously /dev/eth0 is not going to be loaded at boot time - but that >>> may be your intentions. >>> >>> >>> BTW, what different between modify ifcfg-eth? and running the tools of "system-config-network" ? >>> >>> shouldn't be any difference as either should modify the >>> same /etc/sysconfig/network-scripts/ifcfg-ethX file >>> >>> system-config-network does have the ability to also edit your 'hosts' >>> file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf) >>> at one session. >>> >>> Craig >>> >>> >>> >> Hello, >> >> How can we enable and verify the Network Interface working with full >> duplex mode ? >> > > Run ethtool to display the current settings. You can also include > ETHTOOL_OPTS in your ifcfg-ethX file to force a setting but if the > other end of the connection is set to autonegotiate both ends must > negotiate - and current equipment usually gets it right. > Hello, How to enable the NIC with full duplex mode by using option "ETHTOOL_OPTS" in ifcfg-ethx file ? Is there sample config for reference ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
[EMAIL PROTECTED] wrote: I just have the problem of "Destination Host Unreachable" from eth1 ( ping to other same network segment internal machine ) as the following setting : [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=no [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.254 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ../network NETWORKING=yes HOSTNAME=svr1 [EMAIL PROTECTED] network-scripts]# So, what is the problem of the current setting ? looks OK except that I would recommend that you use a FQDN in /etc/sysconfig/network and not just a name... i.e. srv1.mynetwork.com obviously /dev/eth0 is not going to be loaded at boot time - but that may be your intentions. BTW, what different between modify ifcfg-eth? and running the tools of "system-config-network" ? shouldn't be any difference as either should modify the same /etc/sysconfig/network-scripts/ifcfg-ethX file system-config-network does have the ability to also edit your 'hosts' file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf) at one session. Craig Hello, How can we enable and verify the Network Interface working with full duplex mode ? Run ethtool to display the current settings. You can also include ETHTOOL_OPTS in your ifcfg-ethX file to force a setting but if the other end of the connection is set to autonegotiate both ends must negotiate - and current equipment usually gets it right. -- Les Mikesell [EMAIL PROTECTED] -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Aldo Foot wrote: >On Sun, Sep 28, 2008 at 7:53 AM, <[EMAIL PROTECTED]> wrote: > > >>Dear All, >> >>I just have the problem of "Destination Host Unreachable" from eth1 ( ping >>to other same network segment internal machine ) as the following setting : >> >>[EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 >>DEVICE=eth0 >>BOOTPROTO=dhcp >>ONBOOT=no >>[EMAIL PROTECTED] network-scripts]# >> >>[EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 >>DEVICE=eth1 >>BOOTPROTO=static >>BROADCAST=192.168.0.255 >>IPADDR=192.168.0.254 >>NETMASK=255.255.255.0 >>NETWORK=192.168.0.0 >>ONBOOT=yes >>[EMAIL PROTECTED] network-scripts]# >> >>[EMAIL PROTECTED] network-scripts]# cat ../network >>NETWORKING=yes >>HOSTNAME=svr1 >>[EMAIL PROTECTED] network-scripts]# >> >>So, what is the problem of the current setting ? >> >>BTW, what different between modify ifcfg-eth? and running the tools of >>"system-config-network" ? >> >> > >The system-config-network is just a GUI to make it easier to configure >the devices. > >What kind of network devices do you have? are they PCI cards or >attached to the motherboard? > >~af > > /etc/modprobe.conf : aliases eth0 8139too aliases eth1 r8169 For 8139too driver, it is a network interface PCI card ( 10/100M half duplex )... For r8169 driver, it is attached to the motherboard ( ASUS Desktop Barebone : P2-P5945GCX, 1.0G )... The System is FC8... So, any more help for me ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Craig White wrote: >On Sun, 2008-09-28 at 22:53 +0800, [EMAIL PROTECTED] wrote: > > >>Dear All, >> >>I just have the problem of "Destination Host Unreachable" from eth1 >>( ping to other same network segment internal machine ) as the >>following setting : >> >>[EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 >>DEVICE=eth0 >>BOOTPROTO=dhcp >>ONBOOT=no >>[EMAIL PROTECTED] network-scripts]# >> >>[EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 >>DEVICE=eth1 >>BOOTPROTO=static >>BROADCAST=192.168.0.255 >>IPADDR=192.168.0.254 >>NETMASK=255.255.255.0 >>NETWORK=192.168.0.0 >>ONBOOT=yes >>[EMAIL PROTECTED] network-scripts]# >> >>[EMAIL PROTECTED] network-scripts]# cat ../network >>NETWORKING=yes >>HOSTNAME=svr1 >>[EMAIL PROTECTED] network-scripts]# >> >>So, what is the problem of the current setting ? >> >> > >looks OK except that I would recommend that you use a FQDN >in /etc/sysconfig/network and not just a name... i.e. srv1.mynetwork.com > >obviously /dev/eth0 is not going to be loaded at boot time - but that >may be your intentions. > > > >>BTW, what different between modify ifcfg-eth? and running the tools of >>"system-config-network" ? >> >> > >shouldn't be any difference as either should modify the >same /etc/sysconfig/network-scripts/ifcfg-ethX file > >system-config-network does have the ability to also edit your 'hosts' >file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf) >at one session. > >Craig > > > Hello, How can we enable and verify the Network Interface working with full duplex mode ? Thanks Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Sun, Sep 28, 2008 at 7:53 AM, <[EMAIL PROTECTED]> wrote: > Dear All, > > I just have the problem of "Destination Host Unreachable" from eth1 ( ping > to other same network segment internal machine ) as the following setting : > > [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=dhcp > ONBOOT=no > [EMAIL PROTECTED] network-scripts]# > > [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 > DEVICE=eth1 > BOOTPROTO=static > BROADCAST=192.168.0.255 > IPADDR=192.168.0.254 > NETMASK=255.255.255.0 > NETWORK=192.168.0.0 > ONBOOT=yes > [EMAIL PROTECTED] network-scripts]# > > [EMAIL PROTECTED] network-scripts]# cat ../network > NETWORKING=yes > HOSTNAME=svr1 > [EMAIL PROTECTED] network-scripts]# > > So, what is the problem of the current setting ? > > BTW, what different between modify ifcfg-eth? and running the tools of > "system-config-network" ? The system-config-network is just a GUI to make it easier to configure the devices. What kind of network devices do you have? are they PCI cards or attached to the motherboard? ~af -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Sun, 2008-09-28 at 22:53 +0800, [EMAIL PROTECTED] wrote: > Dear All, > > I just have the problem of "Destination Host Unreachable" from eth1 > ( ping to other same network segment internal machine ) as the > following setting : > > [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 > DEVICE=eth0 > BOOTPROTO=dhcp > ONBOOT=no > [EMAIL PROTECTED] network-scripts]# > > [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 > DEVICE=eth1 > BOOTPROTO=static > BROADCAST=192.168.0.255 > IPADDR=192.168.0.254 > NETMASK=255.255.255.0 > NETWORK=192.168.0.0 > ONBOOT=yes > [EMAIL PROTECTED] network-scripts]# > > [EMAIL PROTECTED] network-scripts]# cat ../network > NETWORKING=yes > HOSTNAME=svr1 > [EMAIL PROTECTED] network-scripts]# > > So, what is the problem of the current setting ? looks OK except that I would recommend that you use a FQDN in /etc/sysconfig/network and not just a name... i.e. srv1.mynetwork.com obviously /dev/eth0 is not going to be loaded at boot time - but that may be your intentions. > > BTW, what different between modify ifcfg-eth? and running the tools of > "system-config-network" ? shouldn't be any difference as either should modify the same /etc/sysconfig/network-scripts/ifcfg-ethX file system-config-network does have the ability to also edit your 'hosts' file (/etc/hosts), you dns resolution configuration (/etc/resolv.conf) at one session. Craig -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
Dear All, I just have the problem of "Destination Host Unreachable" from eth1 ( ping to other same network segment internal machine ) as the following setting : [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=no [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.254 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes [EMAIL PROTECTED] network-scripts]# [EMAIL PROTECTED] network-scripts]# cat ../network NETWORKING=yes HOSTNAME=svr1 [EMAIL PROTECTED] network-scripts]# So, what is the problem of the current setting ? BTW, what different between modify ifcfg-eth? and running the tools of "system-config-network" ? Thanks ! Edward. Aldo Foot wrote: >On Sat, Sep 27, 2008 at 12:08 AM, <[EMAIL PROTECTED]> wrote: > > >>Mine is FC8 System... >>So, if I want to modify the config of controller card, then I need to >>edit the following files ? >>/etc/sysconifg/network-scripts/ifcfg-eth? >>/etc/modprobe.conf >> >>And what else other profile also need to be modified ? >> >> >> > > > /etc/modprobe.conf has nothing to do with your network settings. > >First --- look here >http://docs.fedoraproject.org/install-guide/f8/en_US/ch-networkconfig.html > >Then --- As root launch /usr/sbin/system-config-network and configure your >netcard, which by default is eth0. > >~af > > > -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Sat, Sep 27, 2008 at 12:08 AM, <[EMAIL PROTECTED]> wrote: > Mine is FC8 System... > So, if I want to modify the config of controller card, then I need to > edit the following files ? > /etc/sysconifg/network-scripts/ifcfg-eth? > /etc/modprobe.conf > > And what else other profile also need to be modified ? > /etc/modprobe.conf has nothing to do with your network settings. First --- look here http://docs.fedoraproject.org/install-guide/f8/en_US/ch-networkconfig.html Then --- As root launch /usr/sbin/system-config-network and configure your netcard, which by default is eth0. ~af -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Re: [Fwd: Config Network Setting]
On Sat, 2008-09-27 at 15:08 +0800, [EMAIL PROTECTED] wrote: > Dear All, > > After modify the config files, I can't restart the network controll by > using /etc/rc.d/init.d/network restart... > > Thanks ! > > Edward. > > Original Message > Subject: > Config Network Setting > Date: > Sat, 27 Sep 2008 14:43:32 +0800 > From: > [EMAIL PROTECTED] > Reply-To: > Community assistance, > encouragement, and advice for using > Fedora. >To: > fedora-list@redhat.com > > > > Dear All, > > Mine is FC8 System... > So, if I want to modify the config of controller card, then I need to > edit the following files ? > /etc/sysconifg/network-scripts/ifcfg-eth? > /etc/modprobe.conf > > And what else other profile also need to be modified ? > crystal ball cloudy... why did you modify /etc/modprobe.conf? what is error in /var/log/messages? what is output of... cat /etc/sysconfig/network-scripts/ifcfg-eth* cat /etc/modprobe.conf Craig -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
[Fwd: Config Network Setting]
Dear All, After modify the config files, I can't restart the network controll by using /etc/rc.d/init.d/network restart... Thanks ! Edward. Original Message Subject: Config Network Setting Date: Sat, 27 Sep 2008 14:43:32 +0800 From: [EMAIL PROTECTED] Reply-To: Community assistance, encouragement, and advice for using Fedora. To: fedora-list@redhat.com Dear All, Mine is FC8 System... So, if I want to modify the config of controller card, then I need to edit the following files ? /etc/sysconifg/network-scripts/ifcfg-eth? /etc/modprobe.conf And what else other profile also need to be modified ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines __ NOD32 3475 (20080926) Information __ This message was checked by NOD32 antivirus system. http://www.nod32.com.hk -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Config Network Setting
Dear All, Mine is FC8 System... So, if I want to modify the config of controller card, then I need to edit the following files ? /etc/sysconifg/network-scripts/ifcfg-eth? /etc/modprobe.conf And what else other profile also need to be modified ? Thanks ! Edward. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
