Re: [Flexradio] FlexRadio Digest, Vol 77, Issue 3

[Mike]

Hi Burt,

I totally agree with you!
I really like using my F3K in the shack, with PSDR v2.2.2 it's a superb 
CW rig (shame there is no full break-in CW though)
however my little FT817, LDG QRP ATU and a piece of wire have given me 
more pleasure than any other radio I have ever owned!


Living near the coast I have access to the beach whenever I want, there 
is always a constant breeze which makes lifting a large antenna
with a kite extremely easy. Even with the FT817 running at half power to 
save batteries I have worked the world!!!


Taking my FT817 with me on motorcycling/camping trips is a breeze, it 
all goes into one pannier with ease and always puts a smile

on my face when being used.

Life is too short not to QRP!

Mike.
M0AWS
http://www.m0aws.co.uk




On 03/09/11 18:00, flexradio-requ...@flex-radio.biz wrote:

Message: 9
Date: Fri, 2 Sep 2011 17:41:45 -0700 (PDT)
From: Burt
To:flexradio@flex-radio.biz
Subject: Re: [Flexradio] Linear amplifier with Flex-3000?
Message-ID:
<1315010505.39267.yahoomailclas...@web120619.mail.ne1.yahoo.com>
Content-Type: text/plain; charset=us-ascii

I used to think that life was too short for QRP until I took an FT817 down to 
the beach and got better DX than at home. I later bought a Flex 1500, could not 
believe there was so much in a little package although when I bought it a year 
ago I had a lot of problems setting it up, now adddressed by updates.
Burt



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] CW

[Burt]

When I use the CW buffer, while it is sending if I type ahead it clips some 
characters the buffer is sending. How do I fix this?
Flex 5000
Windows 7
The computer I have uses a motherboard recommended by Neal
PSDR 2.15

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Flex-5000A TX1, TX2, TX3

[Kevin Hobbs]

Hi

 

Looking for some further explanation of TX1, TX2, TX3. The manual could
still use a little help or a good example.

 

I want to use TX1 and TX2 as a sequencer. I want TX1 to control
transmit/receive relays, TX2 to control 8877 amp.

 

I think:

TX1 delay 250

TX2 delay 150

 

Will cause:

TX1 to switch 250ms before the Flex actually transmits

TX2 to switch 150ms before the Flex actually transmits

 

Resulting in:

T/R relay to switch, followed by amp to key 100mS later, followed by Flex to
transmit another 150mS later.

 

Is this correct (or backwards)?

 

73 Kevin

 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Flex-5000A TX1, TX2, TX3

[Kevin Hobbs]

And, every time restart PowerSDR it seems to untick my TX3 setting for 6m
and leaves only TX1 ticked?
Does it not like using 2 TX ports on 1 band?



-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Kevin Hobbs
Sent: September-04-11 1:11 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Flex-5000A TX1, TX2, TX3

Hi

 

Looking for some further explanation of TX1, TX2, TX3. The manual could
still use a little help or a good example.

 

I want to use TX1 and TX2 as a sequencer. I want TX1 to control
transmit/receive relays, TX2 to control 8877 amp.

 

I think:

TX1 delay 250

TX2 delay 150

 

Will cause:

TX1 to switch 250ms before the Flex actually transmits

TX2 to switch 150ms before the Flex actually transmits

 

Resulting in:

T/R relay to switch, followed by amp to key 100mS later, followed by Flex to
transmit another 150mS later.

 

Is this correct (or backwards)?

 

73 Kevin

 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] FXpad: new release

[Giuseppe Campana]

Hi,

New FXpad 1.03 release is available for download on: 
http://www.woodboxradio.com/uk/FXpad.html 



On this release:

FXpad is no longer dependent on Tmate

This version of FXpad work with or without Tmate connected to your 
PC,  so that all users
can use PowerSDR and FXpad, even with the new tuning knob 
"FlexControl" or without it.

FlexControl is not supported directly by FXpad but only by PowerSDR.
If you have FlexControl and Tmate too, both knobs simultaneously 
working on PowerSDR

without conflicts of operation.
When Tmate is not connected to the PC, its commands are not displayed 
in FXpad obviously
For full information about FXpad, please refer to its manual included 
in this ZIP file.


PowerSDR and FlexControl are a Trade Mark of FlexRadio Systems.

Thanks to Vittorio IK4IRO for his code.

73 Beppe
IK3VIG

WoodBoxRadio  
___

FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] help

[James Sheehan]

Can anyone help me with this SDR 1000 with a delta 44 card. Everything load
into the computer just fine when power sdr comes up and I hit the start
button the radio go right into mox and it tell me there is a High swr .I
have a 1:1 swr and my other flex works just .I just got this 1000 the other
day I have it on windows xp pro 2giz computer with 2 giz of ram no other
program on this machine except flex radio and few programs .Help

Jim KC1CS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] help

[Mike WA8BXN]

Is the SDR-1000 turned on? 

 

Is the parallel cable connected and working properly? 

 

73 - Mike WA8BXN 

 

 

 

 

---Original Message--- 

 

From: James Sheehan 

Date: 09/04/11 16:37:34 

To: FlexRadio@flex-radio.biz 

Subject: [Flexradio] help 

 

Can anyone help me with this SDR 1000 with a delta 44 card. Everything load 

Into the computer just fine when power sdr comes up and I hit the start 

Button the radio go right into mox and it tell me there is a High swr .I 

Have a 1:1 swr and my other flex works just .I just got this 1000 the other 

Day I have it on windows xp pro 2giz computer with 2 giz of ram no other 

Program on this machine except flex radio and few programs .Help 

 

Jim KC1CS 

___ 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Warerfall display not showing any signals, PSDR 2.0.22

[Mark Lunday]

Was working last week on RTTY, but went to it today and did not see anything
on the waterfall display.  Panadapter still working perfectly.  

I tried adjusting the thresholds in the DISPLAY tab, but nothing seemed to
change.  Is it time for a database reset?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
http://wd4elg.net


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Flex 5000A for sale

[Williams, Barry]

Fellows,

Flex 5000A, dual receivers, antenna tuner, bought Feb 2011, transferrable 
warranty, as new, very low hours includes cables.  $2850.

Please reply direct.

73,
Barry

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] help

[Jerry Flanders]

Your radio is probably OK.

Somewhere between PSDR V 1.18.6 and PSDR V 2.0.16 somebody broke the 
code, I think. Read up on the bug I reported back in January ( 
http://support.flexradio.com/ReviewBug.aspx?id=3403&it=B ). AFAIK, it 
has not been fixed yet.


If you use V 1.18.6, you will probably be OK.

Jerry W4UK

At 11:26 AM 9/4/2011, James Sheehan wrote:

Can anyone help me with this SDR 1000 with a delta 44 card. Everything load
into the computer just fine when power sdr comes up and I hit the start
button the radio go right into mox and it tell me there is a High swr .I
have a 1:1 swr and my other flex works just .I just got this 1000 the other
day I have it on windows xp pro 2giz computer with 2 giz of ram no other
program on this machine except flex radio and few programs .Help

Jim KC1CS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/