Re: [Flexradio] New Release

[N7BCP]

It's a communication channel with nearly a billion (think Dr. Evil) 
active users that can now discover Flex Radio.  Im glad Flex set up a social 
spot where bandwidth is used to share photos and video of our stations and 
general chit-chat is the point.  Participation is, of course, optional.

73s
-Larry
N7BCP

On 25.02.2012, at 04:16, "Lee Mushel"  wrote:

> I certainly hope we don't  tie Flex-Radio to any of the Social Baloney!
> 
> Lee   K9WRU
> - Original Message - From: "Chuck ONeal" 
> To: ; "Robert Costa, KB6QXM" 
> Cc: ; 
> Sent: Friday, February 24, 2012 7:36 PM
> Subject: Re: [Flexradio] New Release
> 
> 
>> Why not here as well???  I don't do facebook...
>> - Original Message - From: "Tim Ellison, W4TME" 
>> To: "Robert Costa, KB6QXM" 
>> Cc: ; 
>> Sent: Friday, February 24, 2012 6:38 PM
>> Subject: Re: [Flexradio] New Release
> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR fails to start, has errors

[Dale Taylor]

Wow, so I just tried a few things and here's my results (no it's not fixed)

I completely uninstalled the FlexRadio drivers and the PowerSDR software.
I also went and manually deleted C:\Users\MyName\App Data\Roaming\Flex
Radio Systems.  The offending files seemed to be in there.

After deleting everything and rebooting I installed the software again.

This time the software worked and I loaded my previous settings without
issue.

I shut down the software, rebooted and went to run it all again and now I
see the very same error again.  Wild, this isn't caused by some boot
without closing problem.  I did a normal shutdown of the software and then
it won't run a 2nd time.

Any clues are appreciated... bummer

On Fri, Feb 24, 2012 at 8:33 PM, Dale Taylor  wrote:

> I've never had any problems with my Flex setup until now.  It appears
> something has happened to the PowerSDR software.  I might have had a system
> update and a reboot or some such thing but was not aware of it.  I get the
> following 2 errors.  I did some searching for filename doesn't exist errors
> in the knowledge base and nothing turned up which is suprising.  Any clues
> or links would be appreciated.
>
> Dale Taylor, N7OXF
>
> Here's a link to the first error shot:
> http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG
>
> Here's a link to the second screen shot:
> http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR fails to start, has errors

[Hanford R Wright]

Dale
You might try a system restore, go back a day before the update and you
should have everything back.  Also I suggest that you change your computers
automatic updates to notify me but don't automatically download or install
them.  In other words do your updates manually when you have Power SDR off.
Hope that helps.  

73's
HANFORD R. WRIGHT  WA4LZC
CRA # 1515  CCA# AC11-12590

HANFORD R. WRIGHT  WA4LZC
CRA # 1515  CCA# AC11-12590


-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dale Taylor
Sent: Friday, February 24, 2012 22:34
To: flexradio@flex-radio.biz
Subject: [Flexradio] PowerSDR fails to start, has errors

I've never had any problems with my Flex setup until now.  It appears
something has happened to the PowerSDR software.  I might have had a system
update and a reboot or some such thing but was not aware of it.  I get the
following 2 errors.  I did some searching for filename doesn't exist errors
in the knowledge base and nothing turned up which is suprising.  Any clues
or links would be appreciated.

Dale Taylor, N7OXF

Here's a link to the first error shot:
http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG

Here's a link to the second screen shot:
http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PowerSDR fails to start, has errors

[Dale Taylor]

I've never had any problems with my Flex setup until now.  It appears
something has happened to the PowerSDR software.  I might have had a system
update and a reboot or some such thing but was not aware of it.  I get the
following 2 errors.  I did some searching for filename doesn't exist errors
in the knowledge base and nothing turned up which is suprising.  Any clues
or links would be appreciated.

Dale Taylor, N7OXF

Here's a link to the first error shot:
http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error1.JPG

Here's a link to the second screen shot:
http://dl.dropbox.com/u/33146476/Photos/Online/PowerSDR-error2.JPG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Lee Mushel]

I certainly hope we don't  tie Flex-Radio to any of the Social Baloney!

Lee   K9WRU
- Original Message - 
From: "Chuck ONeal" 

To: ; "Robert Costa, KB6QXM" 
Cc: ; 
Sent: Friday, February 24, 2012 7:36 PM
Subject: Re: [Flexradio] New Release



Why not here as well???  I don't do facebook...


- Original Message - 
From: "Tim Ellison, W4TME" 

To: "Robert Costa, KB6QXM" 
Cc: ; 
Sent: Friday, February 24, 2012 6:38 PM
Subject: Re: [Flexradio] New Release






___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Hanford R Wright]

I wouldn't touch facebook with a ten foot pole.

HANFORD R. WRIGHT  WA4LZC
CRA # 1515  CCA# AC11-12590


-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of k3...@qsl.net
Sent: Friday, February 24, 2012 21:58
To: Don; flexradio-boun...@flex-radio.biz; [FlexRadio]
Subject: Re: [Flexradio] New Release

Facebook is for kids
Sent from my Verizon Wireless BlackBerry

-Original Message-
From: "Don" 
Sender: flexradio-boun...@flex-radio.biz
Date: Fri, 24 Feb 2012 18:55:35 
To: [FlexRadio]
Subject: [Flexradio]  New Release

Wait a minute, I thought the idea of the FlexRadio Reflector was for news
and support.

Now your saying we have to join Facebook also, no thanks.



Don kd6hq
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[k3tkj]

Facebook is for kids
Sent from my Verizon Wireless BlackBerry

-Original Message-
From: "Don" 
Sender: flexradio-boun...@flex-radio.biz
Date: Fri, 24 Feb 2012 18:55:35 
To: [FlexRadio]
Subject: [Flexradio]  New Release

Wait a minute, I thought the idea of the FlexRadio Reflector was for news and 
support.

Now your saying we have to join Facebook also, no thanks.



Don kd6hq
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] New Release

[Don]

Wait a minute, I thought the idea of the FlexRadio Reflector was for news and 
support.

Now your saying we have to join Facebook also, no thanks.



Don kd6hq
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Chuck ONeal]

Why not here as well???  I don't do facebook...


- Original Message - 
From: "Tim Ellison, W4TME" 

To: "Robert Costa, KB6QXM" 
Cc: ; 
Sent: Friday, February 24, 2012 6:38 PM
Subject: Re: [Flexradio] New Release


There are new goodies in PowerSDR v2.3.x.  And bug fixes too.  I have let 
a few of them out of the bag on the FlexRadio Enthusiasts Facebook page 
(http://www.facebook.com/groups/flexradio/)


Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 5:32 PM, Robert Costa, KB6QXM wrote:

Tim,

Will there be anything else in the software or is it policy not to 
discuss that until release? Bug fixes, new features?


73,
Robert
KB6QXM
"Ham Radio Open Conversation"
Yahoo group owner/moderator


- Reply message -
From: "Tim Ellison, W4TME" 
To: 
Subject: [Flexradio] New Release
Date: Fri, Feb 24, 2012 1:17 pm


Your bird is correct.  We plan to make the new release that has the new
60m privileges available @ 12:01AM ET on 5-March-2012

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 3:22 PM, Guy WR7K wrote:
> I heard from a little bird that the new 60M band will be available
on 3/5 and should be an update for that on the same dateguy
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Behringer DEQ2496 RFI Spikes

[Chuck ONeal]

Mark,

How far away is your transmit antenna from the rig/audio chain?

Chuck K1KW

- Original Message - 
From: "Mark Weidhaas" 

To: 
Sent: Friday, February 24, 2012 2:43 PM
Subject: [Flexradio] Behringer DEQ2496 RFI Spikes



I have tried cheater plugs with no luck. I have ferrites on everything. I
have chokes on my antenna line, both directly outside my shack and at the
33' vertical antenna base. If I lay my mic / headset on my desk, the 
spikes
go away. As soon as I touch the headsets, the spikes come back. I use a 
Heil

foot switch for PTT. I even tried audio transformers on both the headset
audio and mic inputs. It seems "I am in the ground loop"..

Original Post

with my Flex 5000A. My shack is on the second floor of my house so RFI is 
a
constant problem. Using only my Behringer Xenyx802 mixer board and my 
5000A
there are no major RFI problems. I have isolated the 802 from the 
ballanced
line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I 
add
the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on 
both
the 5000A panadapter and on an oscilloscope tapped at my 811H amp output. 
I
have tried various audio isolation techniques but no joy. The spiking is 
the

most pronounced with the amp on. Has anyone encountered this issue and
solved this problem ? if so please advise.>


Mark Weidhaas
W7MGW
TRA 11810 / NAR 87698 / L3
Mobile: (602) 300-5114
mweidh...@cox.net

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Tim Ellison, W4TME]

There are new goodies in PowerSDR v2.3.x.  And bug fixes too.  I have 
let a few of them out of the bag on the FlexRadio Enthusiasts Facebook 
page (http://www.facebook.com/groups/flexradio/)


Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 5:32 PM, Robert Costa, KB6QXM wrote:

Tim,

Will there be anything else in the software or is it policy not to 
discuss that until release? Bug fixes, new features?


73,
Robert
KB6QXM
"Ham Radio Open Conversation"
Yahoo group owner/moderator


- Reply message -
From: "Tim Ellison, W4TME" 
To: 
Subject: [Flexradio] New Release
Date: Fri, Feb 24, 2012 1:17 pm


Your bird is correct.  We plan to make the new release that has the new
60m privileges available @ 12:01AM ET on 5-March-2012

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 3:22 PM, Guy WR7K wrote:
> I heard from a little bird that the new 60M band will be available 
on 3/5 and should be an update for that on the same dateguy

> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[William H. Fite]

I think you can provide that knob-on-the-front option, can't you, Lee?



On Fri, Feb 24, 2012 at 5:50 PM, Lee Mushel  wrote:

> Why not a "knob option" to replace that featureless front panel and by all
> means get rid of that panadapter stuff which does nothing but trigger
> jealousy and bad feelings.
>
> Lee   K9WRU
> - Original Message - From: "Ross Stenberg" <
> ross.stenb...@charter.net>
> To: 
> Sent: Friday, February 24, 2012 3:59 PM
> Subject: Re: [Flexradio] New Release
>
>
>
>  I would suggest that they adopt the Xbox 360 Kinect interface for motion
>> sensing and voice control of all PowerSDR functions.
>>
>> >>>Support for a new wireless Flex Control device identical to the
>> Nintendo Wii. Now you can work that 20-meter pileup and take a few inches
>> off that gut at the same time.
>>
>> __**_
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz
>> Archives: 
>> http://www.mail-archive.com/**flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>>
>>
>
>
> __**_
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz
> Archives: 
> http://www.mail-archive.com/**flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Lee Mushel]

Why not a "knob option" to replace that featureless front panel and by all 
means get rid of that panadapter stuff which does nothing but trigger 
jealousy and bad feelings.


Lee   K9WRU
- Original Message - 
From: "Ross Stenberg" 

To: 
Sent: Friday, February 24, 2012 3:59 PM
Subject: Re: [Flexradio] New Release


I would suggest that they adopt the Xbox 360 Kinect interface for motion 
sensing and voice control of all PowerSDR functions.


>>>Support for a new wireless Flex Control device identical to the
Nintendo Wii. Now you can work that 20-meter pileup and take a few inches 
off that gut at the same time.


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/







___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Robert Costa, KB6QXM]

Tim,

Will there be anything else in the software or is it policy not to discuss that 
until release? Bug fixes, new features?

73,
Robert
KB6QXM
"Ham Radio Open Conversation"
Yahoo group owner/moderator


- Reply message -
From: "Tim Ellison, W4TME" 
To: 
Subject: [Flexradio] New Release
Date: Fri, Feb 24, 2012 1:17 pm


Your bird is correct.  We plan to make the new release that has the new 
60m privileges available @ 12:01AM ET on 5-March-2012

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 3:22 PM, Guy WR7K wrote:
> I heard from a little bird that the new 60M band will be available on 3/5 and 
> should be an update for that on the same dateguy
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Ross Stenberg]

I would suggest that they adopt the Xbox 360 Kinect interface for motion 
sensing and voice control of all PowerSDR functions.


>>>Support for a new wireless Flex Control device identical to the 
Nintendo Wii. Now you can work that 20-meter pileup and take a few 
inches off that gut at the same time.


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Tim Ellison, W4TME]

Your bird is correct.  We plan to make the new release that has the new 
60m privileges available @ 12:01AM ET on 5-March-2012


Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 3:22 PM, Guy WR7K wrote:

I heard from a little bird that the new 60M band will be available on 3/5 and 
should be an update for that on the same dateguy
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] New Release

[Guy WR7K]

I heard from a little bird that the new 60M band will be available on 3/5 and 
should be an update for that on the same dateguy
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[Tim Ellison, W4TME]

That requires a direct payment to my PayPal account :-)

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems™
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/24/2012 3:01 PM, W6SDM Steve wrote:

Automatic Error Detection with Instant Online Support.  As soon as a crash
or error is detected, a Skype video call is instantly made by PSDR to Tim
or Dudley’s office, home, or cell phone.  You don’t even need to be in the
shack – Team Viewer pops up and they just fix whatever went wrong, sending
you an e-mail when it’s all better.

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] New Release

[W6SDM Steve]

I was digging through a dumpster out behind the Flex Radio offices and came
upon the following information scrawled on a notepad, heavily stained by
what looked like a chili-cheese burrito.  It appears that these forward
looking statements may give us some insight into what to expect from the
next release of power SDR.



Integrated data decoder utility very much like DDUtil only with 32 control
ports and the ability to switch between three different rigs.  The rotor
control window also has settings to interface with a garage door opener and
a beer dispenser.



Voice to CW converter.  When the selected mode is USB or LSB and VFO-A is
in the CW portion of any band, speak into the mic and PSDR sends out
perfect code, speed and weight adjustable by the operator.  No-code extras
will now be know-code extras.



Automatic Error Detection with Instant Online Support.  As soon as a crash
or error is detected, a Skype video call is instantly made by PSDR to Tim
or Dudley’s office, home, or cell phone.  You don’t even need to be in the
shack – Team Viewer pops up and they just fix whatever went wrong, sending
you an e-mail when it’s all better.


Support for a new wireless Flex Control device identical to the Nintendo
Wii.  Now you can work that 20-meter pileup and take a few inches off that
gut at the same time.



So there you have it.  ICOM, Yaesu, and Kenwood owners eat your heart out!



73,


Steve

-- 
Steve Miller
w6sdm.net
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Behringer DEQ2496 RFI Spikes

[Mark Weidhaas]

I have tried cheater plugs with no luck. I have ferrites on everything. I
have chokes on my antenna line, both directly outside my shack and at the
33' vertical antenna base. If I lay my mic / headset on my desk, the spikes
go away. As soon as I touch the headsets, the spikes come back. I use a Heil
foot switch for PTT. I even tried audio transformers on both the headset
audio and mic inputs. It seems "I am in the ground loop"..

Original Post



 
Mark Weidhaas
W7MGW
TRA 11810 / NAR 87698 / L3
Mobile: (602) 300-5114
mweidh...@cox.net
 
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Power Button Sticks 5000A

[W6SDM Steve]

Sticky power button in the Flex 5000?  Guess I will have to check mine.
It's never been turned off since I got it.  :)

-- 
Steve Miller
w6sdm.net
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Everything you might want to know about the Flexcontrol

[Tony Estep]

For a rare glimpse into what it takes to design and build a commercial
electronic gadget, plus a lot of other fascinating info, check out
this interview with Stu, K6TU, the designer of the Flexcontrol. It's
at:

http://www.dh1tw.de/flex-control-interviewing-the-developer

Tony KTØNY


-- 
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] MixW Setting Question

[Erik Jakobsen]

Is it these lines, that are in focus ?
http://www.urbakken.dk/lines.jpg
73s
Erik OZ4KK


Are you using the demo version of VAC?
http://kc.flexradio.com/KnowledgebaseArticle50251.aspx

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/23/2012 12:40 AM, W6SDM Steve wrote:

I have MIxW configured and working - sort of.  I have been through the
WIIKI and the program is operating with PowerSDR except that my 
waterfall

in MixW is colored thin horizontal lines instead of the full waterfall I
see in the panafall.  I have changed my sample rate in both PSDR and 
MixW
between 12000 and 48000 to no avail.  I know it's got to be a setting 
that

I missed somewhere. Can anyone tell me where to look?

Steve




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 472-479 KHz receiving and transmitting ERP and antennamodels

[Jerry]

I just ordered a LF converter and we will see how it works.  Jerry   
http://wb9kzy.com/lfconv.htm


- Reply message -
From: "Chuck O'Neal"
To:
Subject: [Flexradio] 472-479 KHz receiving and transmitting ERPand
antennamodels
Date: Thu, Feb 23, 2012 12:12 pm




Here is what I've done with excellent results for the 600+ meter band.



I have two Clifton Labs filters, one is the BCB reject filter mentioned below 
and a second custom low pass filter I had made by Clifton La bs with a 3 dB 
corner at 85 0 KHz.  This second filter allows my Flex 5000A to cover the low 
end of the BCB with no images, down to 500 KHz from about 850 KHZ where the 
images appear to start up pretty badly.



As noted by Jordan, the BCB band reject filter still allows stuff from above 
the BCB to to get in and produce lots of false signals below 500 KHz.  I can 
hear 160M amateur signals there with the BCB reject filter in.  When I run both 
the 830KHz low pass filter and the BCB reject filter in series, ALL the false 
signals and  images go away.  Nothing left but actual signals from 500 KHz down 
to about 250 KHz where images from below 500 KHz begin to start up.  I think 
another low pass filter at around 275 KHz would allow reception down lower yet.



With all these filters, I think a down converter is probably best in the end.



Chuck  K1KW




--
*Not sent from an iPhone: I prefer cappuccino to Cupertino.*
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Behringer DEQ2496 RFI Spikes

[Bill Winkis]

Absolute ...most of the Behringer pre-audio enhancement equipment suffer
from weak power supplies...yes; a couple of Ferrite Blocks will take care of
the issue, also you can examine the supply and install a couple of .01
capacitors
Bill  KC4PE

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME
Sent: Thursday, February 23, 2012 10:10 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Behringer DEQ2496 RFI Spikes

Pin 1 problem?
http://pin1problem.com/

RF coming through the AC safety ground (ground loop)?

Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 2/23/2012 10:06 PM, Michael Walker wrote:
> Hi Mark
>
> Sounds like you  may need to install some Mix 31 and Mix 43 torroids to
> start to knock the RF down.  Since it is worse with the Amp on, it seems
> related to RFI.
>
> I would start with each and every power lead and then work on the audio
> leads.
>
> Google YCCC and Choke and you will find the PDF that Chuck W1HIS
assembled.
>   You will find it very informative.
>
> Mike va3mw
>
>
> On Thu, Feb 23, 2012 at 9:20 PM, Mark Weidhaas  wrote:
>
>> I have been trying to integrate a Behringer DEQ2496 into my audio chain
>> with
>> my Flex 5000A. My shack is on the second floor of my house so RFI is a
>> constant problem. Using only my Behringer Xenyx802 mixer board and my
5000A
>> there are no major RFI problems. I have isolated the 802 from the
ballanced
>> line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I
>> add
>> the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on
both
>> the 5000A panadapter and on an oscilloscope tapped at my 811H amp output.
I
>> have tried various audio isolation techniques but no joy. The spiking is
>> the
>> most pronounced with the amp on. Has anyone encountered this issue and
>> solved this problem ? if so please advise.
>>
>> Mark Weidhaas
>> W7MGW
>> TRA 11810 / NAR 87698 / L3
>> Mobile: (602) 300-5114
>> mweidh...@cox.net
>>
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Behringer DEQ2496 RFI Spikes

[Craig Gagner]

Mark, I just sent you an e-mail with a copy of the article I wrote on using
rack gear, please let me know if it works for you. I had the same spike
problem and resolved it using these settings.

Craig

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Weidhaas
Sent: Thursday, February 23, 2012 9:20 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Behringer DEQ2496 RFI Spikes

I have been trying to integrate a Behringer DEQ2496 into my audio chain with
my Flex 5000A. My shack is on the second floor of my house so RFI is a
constant problem. Using only my Behringer Xenyx802 mixer board and my 5000A
there are no major RFI problems. I have isolated the 802 from the ballanced
line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I add
the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on both
the 5000A panadapter and on an oscilloscope tapped at my 811H amp output. I
have tried various audio isolation techniques but no joy. The spiking is the
most pronounced with the amp on. Has anyone encountered this issue and
solved this problem ? if so please advise.
 
Mark Weidhaas
W7MGW
TRA 11810 / NAR 87698 / L3
Mobile: (602) 300-5114
mweidh...@cox.net




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/