[Flexradio] FLDIGI soundcard settings.

[David Walker]

Hi folks,

I have VAC 4.11 working.  No problems now.  

The soundcard settiings for FLDIGI show AUTO, and a range of other sample rate 
settings.  Should I set fldigi to AUTO or 48000?

Cheers,

Dave
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] WSPR and CAT

[Brian Lloyd]

On Thu, Mar 15, 2012 at 12:06 PM, Tony Estep  wrote:

> On Thu, Mar 15, 2012 at 1:49 PM, Al K0VM  wrote:
> > ...Although WSPR shows all available COM ports, rigctl only supports
> COM1 thru
> > COM8...
>

In my tests it works with com1-com9. I suppose it could have changed but
the version of WSPR I am running will work with com ports through com9.


> 
> Very helpful, Al. I gather that you must have dug this out of the
> source code -- great work!
>
> Like many others, I made my port combos COM3->COM13, etc. Changed it
> to COM3->COM8 and it worked immediately.
>
> Thanks for your research and useful info.
>
> Tony KT0NY
>
>
> --
> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>
>
> --
> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>



-- 
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
br...@lloyd.com
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FlexRadio Digest, Vol 83, Issue 15

[Brian Lloyd]

On Thu, Mar 15, 2012 at 11:49 AM, Al K0VM  wrote:

> Mike,
>  I have discover why my WSPR CAT stopped working...   Change of CAT port...
> Although WSPR shows all available COM ports, rigctl only supports COM1
> thru COM8..
> COM9 and higher fail with an error...
>
>  ( for others with WSPR CAT problems, try a com port less than COM 9...
> rigctl is a shim that WSPR uses for sending CAT commands to PSDR [or DDUTil
> ] )
>

Ah. I forgot to mention that put it is the second bullet item in the WSPR
article on the Wiki.

-- 
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
br...@lloyd.com
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Upgrading to VAC 4.11

[Bill Tynan]

Dave Gomberg,, NE5EE wrote:

As was patiently explained to me, what you need to do is find the URL 
that you used to download 4.09,  change the 409 in the URL to 411, 
and download again.   What you get is a zip file containing 
everything you need to install 4.11 after you uninstall 4.09

Does that help?

OK, but what does 4.11 do that 4.09 doesn't do? Is it worthwhile to upgrade?

And what should be  used to uninstall 4.09. I had a bad experience with the 
Trial version using Windows Control Panel and Add/Remove Programs. When I 
bought and downloaded the Licensed version, it said to uninstall ALL previous 
versions of VAC. Add/Remove Programs does NOT do a complete job and left some 
pieces of the Trial version. Therefore, the Licensed version would NOT load. I 
got a lot of help from a friendly Flexer and the problem was solved.

But, does one need to use something like Revo to remove the old version?

Thanks for the help.

73,

Bill Tynan, W3XO




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 on WinXP

[James Austin]

Silly me!

When I uninstalled VAC 4.09, Windows reset the defaults on the VAC lines to
44.1 KHz. After I switched them back to 48KHz, the spectrum went back to
normal.

Jim KA2RVO

On Thu, Mar 15, 2012 at 10:24 PM, James Austin  wrote:

> Hi Dave,
>
> I noticed this as well. Have not figured out how to fix it yet, did not
> happen with 4.09.
>
> Jim KA2RVO
>
>
> On Thu, Mar 15, 2012 at 9:01 PM, David Walker  wrote:
>
>> Hi,
>>
>> I installed VAC 4.11 and noticed multiple images of the digital
>> transmission was appearing in the TX Filter.  I setup according to the flex
>> instructions.  So I have deleted 4.11 and returned to 4.09.
>>
>> Has anyone else noticed this?
>>
>> Regards
>>
>> Dave.
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 on WinXP

[James Austin]

Hi Dave,

I noticed this as well. Have not figured out how to fix it yet, did not
happen with 4.09.

Jim KA2RVO

On Thu, Mar 15, 2012 at 9:01 PM, David Walker  wrote:

> Hi,
>
> I installed VAC 4.11 and noticed multiple images of the digital
> transmission was appearing in the TX Filter.  I setup according to the flex
> instructions.  So I have deleted 4.11 and returned to 4.09.
>
> Has anyone else noticed this?
>
> Regards
>
> Dave.
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] VAC 4.11 on WinXP

[David Walker]

Hi,

I installed VAC 4.11 and noticed multiple images of the digital transmission 
was appearing in the TX Filter.  I setup according to the flex instructions.  
So I have deleted 4.11 and returned to 4.09. 

Has anyone else noticed this?

Regards

Dave.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[Steven Hess]

You'd introduce another sound device in the chain to induce artifacts
and added complications too.

"enable channel mixing" checked or unchecked in the VAC configuration tool?

-- 

Steven L Hess ARS KC6KGE DM05gd22
Skype user flamebait Cell 661 487 0357 (Facetime)
Google Voice 661 769 6201
openSUSE Linux 12.1

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[Jerry Flanders]

On 3/15/2012 6:06 PM, Steven Hess wrote:

Part of me wants to reward Eugene more for all the work he puts into
VAC and the supporting web facing infrastructure he has to maintain
but I am broke too. For 30 dollars I got a lifetime copy?  That is a
great deal for this software that the Flex Radios need to interface to
any digital program. Without it it would just be a box for talking on
and not much use to me.

Steven

Steven L Hess ARS KC6KGE
   


You would have used a simple audio patch cable instead. Actually, that 
audio patch cable would have worked even better than VAC for those of us 
with RX2 prior to the latest PowerSDR release.


Jerry W4UK

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] vac 4.11

[Dave Gomberg]

At 09:37 3/15/2012, J M Swearman wrote:
Hi all, I bought vac v4.09 last july and thought that all I had to 
do was re submit the original purchasing link to avangate to be able 
to request the upgrade. The link was broken "page not found" Can 
anyone advise how to get the update, please? Morrice M5ADZ


As was patiently explained to me, what you need to do is find the URL 
that you used to download 4.09,  change the 409 in the URL to 411, 
and download again.   What you get is a zip file containing 
everything you need to install 4.11 after you uninstall 4.09


Does that help?



--
Dave Gomberg, San Francisco   NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
- 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] URL to new suggested VAC settings?

[Steven Hess]

Tim put out a post to the reflector that had the new suggested settings for VAC.
I can't find it and the Knowledge Base isn't as straightforward as
that post was.
Does someone have the URL?

Thanks
Steven
-- 

Steven L Hess ARS KC6KGE DM05gd22
Skype user flamebait Cell 661 487 0357 (Facetime)
Google Voice 661 769 6201
openSUSE Linux 12.1

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] DC on Headphones

[Jim Barber]

This is just idle speculation, but I'll guess that the headphone amp is 
single-ended, so uses a fairly large coupling cap for good bass response 
with low-impedance headphones. Large coupling cap = big "pop" when first 
plugging the cans in.


Again, idle speculation but if someone with a service manual took a look 
it would be interesting to know if it turned out to be true.


73,
Jim N7CXI

On 3/15/2012 3:03 PM, Rob Keijzer wrote:

Hello everybody,

Picked up my new Flex 5000A yesterday and I must say, I'm very pleased with
it. It is so extremely configurable that it invites to experiment with the
different settings.

Installation was very easy and presented no problems. I have installed the
new PowerSDR v2.3.5.

Found a firewire card that has a TI chipset and a PCI-Express strip that
fits in my Computer.

The only issue I have is, that when I plug in a headphone (or unplug it) I
get a very loud crack in both earpieces, indicating there may be DC on the
terminal. I took my voltmeter and plugged in an empty jack, and measured
2.4 volts on both channels.

Now, this DC is only present if PowerSDR is running and the headphone is
selected (ticked) in the Mixer form, not if the Flex and the pc are simply
on.

As long as I don't fry my Headphones I can live with this, but maybe this
can be improved.

All in all I'm very happywith this new radio.

73,
Rob




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[Steven Hess]

Part of me wants to reward Eugene more for all the work he puts into
VAC and the supporting web facing infrastructure he has to maintain
but I am broke too. For 30 dollars I got a lifetime copy?  That is a
great deal for this software that the Flex Radios need to interface to
any digital program. Without it it would just be a box for talking on
and not much use to me.

Steven

Steven L Hess ARS KC6KGE DM05gd22
Skype user flamebait Cell 661 487 0357 (Facetime)
Google Voice 661 769 6201
openSUSE Linux 12.1

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[Steven Hess]

I just copied it to a thumb drive to transfer over to the Windows 7 64
machine. I guess I need to not have the Flex powered on and tying up
the the VAC cable when I uninstall  VAC 4.09 program via the control
panel.
Is this correct?

Steven
-- 

Steven L Hess ARS KC6KGE DM05gd22
Skype user flamebait Cell 661 487 0357 (Facetime)
Google Voice 661 769 6201
openSUSE Linux 12.1

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] DC on Headphones

[Rob Keijzer]

Hello everybody,

Picked up my new Flex 5000A yesterday and I must say, I'm very pleased with
it. It is so extremely configurable that it invites to experiment with the
different settings.

Installation was very easy and presented no problems. I have installed the
new PowerSDR v2.3.5.

Found a firewire card that has a TI chipset and a PCI-Express strip that
fits in my Computer.

The only issue I have is, that when I plug in a headphone (or unplug it) I
get a very loud crack in both earpieces, indicating there may be DC on the
terminal. I took my voltmeter and plugged in an empty jack, and measured
2.4 volts on both channels.

Now, this DC is only present if PowerSDR is running and the headphone is
selected (ticked) in the Mixer form, not if the Flex and the pc are simply
on.

As long as I don't fry my Headphones I can live with this, but maybe this
can be improved.

All in all I'm very happywith this new radio.

73,
Rob

-- 
Rob Keijzer
PA3CNT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[Jim Jannuzzo]

Yes. Extract before trying to install. You'll find both setup.exe and 
setup64.exe.  Use setup64.exe if you're using Windows 7, 64 bit.I was surprised 
to find that the CPU utilization plummeted from teens/20's to single 
digits/teens. Jim KJ2P
 > Date: Thu, 15 Mar 2012 14:33:38 -0700
> From: flameb...@gmail.com
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] 4.11
> 
> Just to reconfirm for the 20th time. All I do is change 409 to 411 in
> the URL I got what I purchased VAC from Eugene?
> The file downloaded VERY fast and is vac411full.zip
> 
> Steven
> -- 
> 
> Steven L Hess ARS KC6KGE DM05gd22
> Skype user flamebait Cell 661 487 0357 (Facetime)
> Google Voice 661 769 6201
> openSUSE Linux 12.1
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
  
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 4.11

[k4xtt]

Yes, Yes,  That is it!


On 3/15/2012 5:33 PM, Steven Hess wrote:

Just to reconfirm for the 20th time. All I do is change 409 to 411 in
the URL I got what I purchased VAC from Eugene?
The file downloaded VERY fast and is vac411full.zip

Steven



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] 4.11

[Steven Hess]

Just to reconfirm for the 20th time. All I do is change 409 to 411 in
the URL I got what I purchased VAC from Eugene?
The file downloaded VERY fast and is vac411full.zip

Steven
-- 

Steven L Hess ARS KC6KGE DM05gd22
Skype user flamebait Cell 661 487 0357 (Facetime)
Google Voice 661 769 6201
openSUSE Linux 12.1

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PSDR v2.3.5 and CW Skimmer

[Tim Ellison, W4TME]

That is a CW skimmer limitation in the view area.  Make sure the radio's 
sampling rate is 192k


Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 3/15/2012 5:20 PM, Jan Egholm wrote:

Hi Tim,

Have tryed it with 192khz and WDM-KS in Flex and WDM in Skimmer but bandwith
looks stll to be abot 48khz in skimmer?

Jan, OY3JE

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME
Sent: 11. marts 2012 18:38
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] PSDR v2.3.5 and CW Skimmer

Absolutely you can.  Just configure CWskimmer for the WDM-KS driver and
192K.  You will need to set the radio's sampling rate to 192K also, as
Direct IQ is directly dependent on the radio's native sampling rate.

Tim Ellison, W4TME
Product Management, Sales&  Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com
Web: www.flexradio.com

logo


On 3/11/2012 8:20 AM, Jan Egholm wrote:

Hi,

Now that PowerSDR ver 2.3.5 supports 96 and 192khz in VAC, do anyone
know if we allso can use 96 and 192khz in CW skimmer, or it's still only

48khz?

73,
Jan, OY3JE


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/
-
Ingen virus fundet i denne meddelelse.
Kontrolleret af AVG - www.avg.com
Version: 2012.0.1913 / Virusdatabase: 2114/4868 - Udgivelsesdato: 13-03-2012


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Winlink 2000, Winmore

[Tom Brown N4TAB]

The RMS Express Help files have a fairly comprehensive setup guide for a 
5K. Look under Flex Radios. I need to update it, but it's a good 
starting point. Contact me off list iff you hit a snag.


73,

Tom N4TAB
North Carolina



On 3/14/2012 9:59 PM, Michael Moore wrote:

I have a Flex 5000A with all options and would like to know if any one has
gotten Winlink 2000 to work with the Flex systems.  There is a test coming
up in May that needs Winmore or PACTOR III to participate and free is
better than another $1200.
Thanks Mike N5RWH



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] WSPR and CAT

[Michael Walker]

And, I have updated the wiki

http://flexradiowiki.com/frsradoiowiki/index.php?title=WSPR

Mike va3mw

On Thu, Mar 15, 2012 at 4:00 PM, Michael Walker wrote:

> I just tested this and it worked.
>
> 2.3.5 Psdr
> 1.03 VSP Manager
> TS2000 emulation on PSDR
> Com port 4
>
> I have to test and see if I can get it to work with DDUTIL.  It 'should'.
>
> This boils down to the fact that the PTT line can be up to 15, but the Rig
> Control can only go up to Com 8.
>
> The Wiki should get updated.
>
> Nice catch!
>
> Mike va3mw
>
>
> On Thu, Mar 15, 2012 at 3:25 PM, Michael Walker wrote:
>
>> Ah, that makes sense now.  I just hand not had a chance to get to the
>> source code.
>>
>> And, that is the reason for the IO error.
>>
>> Mike va3mw
>>
>>
>> On Thu, Mar 15, 2012 at 3:06 PM, Tony Estep  wrote:
>>
>>> On Thu, Mar 15, 2012 at 1:49 PM, Al K0VM  wrote:
>>> > ...Although WSPR shows all available COM ports, rigctl only supports
>>> COM1 thru
>>> > COM8...
>>> 
>>> Very helpful, Al. I gather that you must have dug this out of the
>>> source code -- great work!
>>>
>>> Like many others, I made my port combos COM3->COM13, etc. Changed it
>>> to COM3->COM8 and it worked immediately.
>>>
>>> Thanks for your research and useful info.
>>>
>>> Tony KT0NY
>>>
>>>
>>> --
>>> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>>>
>>>
>>> --
>>> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>>>
>>> ___
>>> FlexRadio Systems Mailing List
>>> FlexRadio@flex-radio.biz
>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>>> http://www.flexradio.com/
>>>
>>
>>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] WSPR and CAT

[Michael Walker]

I just tested this and it worked.

2.3.5 Psdr
1.03 VSP Manager
TS2000 emulation on PSDR
Com port 4

I have to test and see if I can get it to work with DDUTIL.  It 'should'.

This boils down to the fact that the PTT line can be up to 15, but the Rig
Control can only go up to Com 8.

The Wiki should get updated.

Nice catch!

Mike va3mw


On Thu, Mar 15, 2012 at 3:25 PM, Michael Walker wrote:

> Ah, that makes sense now.  I just hand not had a chance to get to the
> source code.
>
> And, that is the reason for the IO error.
>
> Mike va3mw
>
>
> On Thu, Mar 15, 2012 at 3:06 PM, Tony Estep  wrote:
>
>> On Thu, Mar 15, 2012 at 1:49 PM, Al K0VM  wrote:
>> > ...Although WSPR shows all available COM ports, rigctl only supports
>> COM1 thru
>> > COM8...
>> 
>> Very helpful, Al. I gather that you must have dug this out of the
>> source code -- great work!
>>
>> Like many others, I made my port combos COM3->COM13, etc. Changed it
>> to COM3->COM8 and it worked immediately.
>>
>> Thanks for your research and useful info.
>>
>> Tony KT0NY
>>
>>
>> --
>> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>>
>>
>> --
>> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>>
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] WSPR and CAT

[Michael Walker]

Ah, that makes sense now.  I just hand not had a chance to get to the
source code.

And, that is the reason for the IO error.

Mike va3mw


On Thu, Mar 15, 2012 at 3:06 PM, Tony Estep  wrote:

> On Thu, Mar 15, 2012 at 1:49 PM, Al K0VM  wrote:
> > ...Although WSPR shows all available COM ports, rigctl only supports
> COM1 thru
> > COM8...
> 
> Very helpful, Al. I gather that you must have dug this out of the
> source code -- great work!
>
> Like many others, I made my port combos COM3->COM13, etc. Changed it
> to COM3->COM8 and it worked immediately.
>
> Thanks for your research and useful info.
>
> Tony KT0NY
>
>
> --
> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>
>
> --
> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] WSPR and CAT

[Tony Estep]

On Thu, Mar 15, 2012 at 1:49 PM, Al K0VM  wrote:
> ...Although WSPR shows all available COM ports, rigctl only supports COM1 thru
> COM8...

Very helpful, Al. I gather that you must have dug this out of the
source code -- great work!

Like many others, I made my port combos COM3->COM13, etc. Changed it
to COM3->COM8 and it worked immediately.

Thanks for your research and useful info.

Tony KT0NY


--
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352


-- 
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 2.3.5 TX Profile Mic Boost Setting

[Jim Jannuzzo]

Let me correct that: I cut the front mic input (not the rear Balanced Line In) 
by about half. 
 > From: jsqu...@msn.com
> To: joe.n...@gmail.com; flexradio@flex-radio.biz
> Date: Thu, 15 Mar 2012 18:46:44 +
> Subject: Re: [Flexradio] 2.3.5 TX Profile Mic Boost Setting
> 
> 
> Joe,I just tried it, and Mic Boost does not change with the new TX profile.  
> Looks like that one was left out. However, the new profiles do include the 
> selection of Mic in the Mixer.  I have two mics, a headset boom mic in rear 
> (balanced) and a desk boom mic in front.   I have Mic Boost enabled for both, 
> and must cut the output of the Balanced Line In the Mixer to about half.  So 
> yes, you can use two mics, keep Mic Boost enabled, and use other parts of the 
> audio chain to quiet the louder one.Jim KJ2P   
>  > Date: Thu, 15 Mar 2012 13:03:47 -0400
> > From: joe.n...@gmail.com
> > To: flexradio@flex-radio.biz
> > Subject: [Flexradio] 2.3.5 TX Profile Mic Boost Setting
> > 
> > Does the Mic Boost setting now change with the Transmit Profile? If
> > so, I could use two mics on my 5000A, one in the front and one in the
> > back jack and with two different profiles the Mic Boost would turn off
> > or on with the profile.
> > 
> > Joe  N9VX
> > 
> > ___
> > FlexRadio Systems Mailing List
> > FlexRadio@flex-radio.biz
> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> > Knowledge Base: http://kc.flexradio.com/  Homepage: 
> > http://www.flexradio.com/
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
  
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] VAC 4.11 - Working Well Here

[Jerry Falletta]

I uninstalled 4.09 and installed 4.11; everything seemed to go smoothly. Like 
others here, my old settings from 4.09 remained intact (with the new box to be 
"unchecked" per Tim's recommendation). 
 
At first, I was only getting five watts output with the same settings, but then 
re-booted a couple of times, not the power output on digital modes is back to 
normal (~30 watts)... another one of those cases in which it starts working and 
one wonders why, other than the re-boot, of course.
 
Good stuff (and thanks again to the Flex crew)! :)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FlexRadio Digest, Vol 83, Issue 15

[Al K0VM]

Mike,
  I have discover why my WSPR CAT stopped working...   Change of CAT 
port...
Although WSPR shows all available COM ports, rigctl only supports COM1 
thru COM8..

COM9 and higher fail with an error...

 ( for others with WSPR CAT problems, try a com port less than COM 9... 
rigctl is a shim that WSPR uses for sending CAT commands to PSDR [or 
DDUTil ] )


  Hope this helps...

AL, KØVM


On 3/15/2012 12:00 PM, flexradio-requ...@flex-radio.biz wrote:

Date: Wed, 14 Mar 2012 16:26:29 -0500
From: "a.groff"
To: Michael Walker
Cc:flexradio@flex-radio.biz
Subject: Re: [Flexradio] 3000 and WSPR CAT control
Message-ID:<4f610d05.2080...@mchsi.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Mike,
PORTMON normally shows the opening/closing activity as well as the
traffic.  So my conclusion is that rigctl is not getting as far as
opening the correct port ( or any port ?? )

AL, K0VM


On 3/14/2012 4:17 PM, Michael Walker wrote:

>  I guess I am going to have to go look at the source code for rigctl,
>  but does the error message:
>
>  IO Error
>
>  Tell me that it can't send data to the port, or that it can't open the
>  port.
>
>  My guess, is that the port got opened, but you can't move data into
>  it.  That is why PORTMON would show no activity.
>
>  Mike va3mw
>
>
>  On Wed, Mar 14, 2012 at 4:44 PM, a.groff  >  wrote:
>
>   Mike,
>FYI, WSPR CAT was working for me but is now broken... As recently
>   as early Feburary, my WSPR was able to control my PowerSDR but it
>   no longer does so ( PSDR 2.2.3 or 2.3.5).  PORTMON shows no
>   activity what so ever on the WSPR CAT serial port .  ( The WSPR
>   PTT serial port is working fine. )
>My WSPR has not changed, nor has my VSPMGR. There have however,
>   been a couple of WINXP updates.
>
>Since PORTMON shows no activity I am currently assuming that MS
>   update has broken something in WSPR.
>
>Continuing to investigate.
>
>   AL, K0VM
>


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] 2.3.5 TX Profile Mic Boost Setting

[Jim Jannuzzo]

Joe,I just tried it, and Mic Boost does not change with the new TX profile.  
Looks like that one was left out. However, the new profiles do include the 
selection of Mic in the Mixer.  I have two mics, a headset boom mic in rear 
(balanced) and a desk boom mic in front.   I have Mic Boost enabled for both, 
and must cut the output of the Balanced Line In the Mixer to about half.  So 
yes, you can use two mics, keep Mic Boost enabled, and use other parts of the 
audio chain to quiet the louder one.Jim KJ2P   
 > Date: Thu, 15 Mar 2012 13:03:47 -0400
> From: joe.n...@gmail.com
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] 2.3.5 TX Profile Mic Boost Setting
> 
> Does the Mic Boost setting now change with the Transmit Profile? If
> so, I could use two mics on my 5000A, one in the front and one in the
> back jack and with two different profiles the Mic Boost would turn off
> or on with the profile.
> 
> Joe  N9VX
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
  
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] vac 4.11

[Mike WA8BXN]

In the e-mail I received after purchase, there were 2 URLs. I find right now
that the first one works, the second one (mirror site) does not. 

 

73 - Mike WA8BXN 

 

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] 2.3.5 TX Profile Mic Boost Setting

[Joe Word]

Does the Mic Boost setting now change with the Transmit Profile? If
so, I could use two mics on my 5000A, one in the front and one in the
back jack and with two different profiles the Mic Boost would turn off
or on with the profile.

Joe  N9VX

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Flex 1500 for sale

[Stephen Krosner]

I have a flex 1500 for sale.  Less than a year old.  Perfect condition.
Power and USB cable included.  Non smoker and not run mobile.  I've tried
SDR-QRP and I prefer the ability to move about without having to drag a
laptop on my ham outings so I'm going back to mopre conventional radios.
$525 including shipping CONUS.  

Steve, K4ZPF

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] vac 4.11

[J M Swearman]

Hi all, I bought vac v4.09 last july and thought that all I had to do was re 
submit the original purchasing link to avangate to be able to request the 
upgrade. The link was broken "page not found" Can anyone advise how to get the 
update, please? Morrice M5ADZ

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 on WinXP

[Tim Ellison]

Maybe. Try it out and see. Please report back the results. 

-Tim
---
Sent from my iPhone with typos included at no extra charge. 

On Mar 15, 2012, at 9:06 AM, Mathias Krueger  wrote:

> Hello Tim, 
> 
> Does that mean, that my tx issue in PSK could be solved using 4.11 ?
> Regards
> Mathias
> HB9DOU
> 
> 
> 
> Am 15.03.2012 um 13:54 schrieb Tim Ellison :
> 
>> The new driver uses a streaming architecture rather than an interrupt / DPC 
>> architecture.  This ensures that VAC transfers the bit-perfect audio stream 
>> between PowerSDR and your third-party sound card based application more 
>> efficiently and doesn't drop audio buffers like previous versions.
>> 
>> Tim Ellison
>> 
>> On 3/14/2012 11:15 PM, Jim Jannuzzo wrote:
>>> But does 4.11 add anything for us?  Does it correct any wrongs that affect 
>>> Flex radios?  If not, then I may not chase the state of Eugene's art. Jim
 Date: Wed, 14 Mar 2012 17:41:27 -0700
 From: brian-wb6...@lloyd.com
 To: flexradio@flex-radio.biz; flexra...@yahoogroups.com; 
 flexe...@flex-radio.biz
 Subject: [Flexradio] VAC 4.11 on WinXP
 
 Just a quick note to say that I have installed VAC 4.11 on WinXP SP3. In
 quick testing with fldigi 3.21.33, WSPR 2.21, and PowerSDR 2.3.5 I found no
 problems whatsoever when VAC 4.11 was set up according to the instructions
 in the PowerSDR release notes and Tim's admonition to uncheck "enable
 channel mixing". There are no noticeable additional delays or any other
 anomalies that I could detect.
 
 -- 
 Brian Lloyd, WB6RQN/J79BPL
 3191 Western Dr.
 Cameron Park, CA 95682
 br...@lloyd.com
 +1.767.617.1365 (Dominica)
 +1.916.877.5067 (USA)
 ___
 FlexRadio Systems Mailing List
 FlexRadio@flex-radio.biz
 http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
 Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
 Knowledge Base: http://kc.flexradio.com/  Homepage: 
 http://www.flexradio.com/
>>> 
>>> ___
>>> FlexRadio Systems Mailing List
>>> FlexRadio@flex-radio.biz
>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>>> Knowledge Base: http://kc.flexradio.com/  Homepage: 
>>> http://www.flexradio.com/
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 on WinXP

[Mathias Krueger]

Hello Tim, 

Does that mean, that my tx issue in PSK could be solved using 4.11 ?
Regards
Mathias
HB9DOU



Am 15.03.2012 um 13:54 schrieb Tim Ellison :

> The new driver uses a streaming architecture rather than an interrupt / DPC 
> architecture.  This ensures that VAC transfers the bit-perfect audio stream 
> between PowerSDR and your third-party sound card based application more 
> efficiently and doesn't drop audio buffers like previous versions.
> 
> Tim Ellison
> 
> On 3/14/2012 11:15 PM, Jim Jannuzzo wrote:
>> But does 4.11 add anything for us?  Does it correct any wrongs that affect 
>> Flex radios?  If not, then I may not chase the state of Eugene's art. Jim
>>  >  Date: Wed, 14 Mar 2012 17:41:27 -0700
>>> From: brian-wb6...@lloyd.com
>>> To: flexradio@flex-radio.biz; flexra...@yahoogroups.com; 
>>> flexe...@flex-radio.biz
>>> Subject: [Flexradio] VAC 4.11 on WinXP
>>> 
>>> Just a quick note to say that I have installed VAC 4.11 on WinXP SP3. In
>>> quick testing with fldigi 3.21.33, WSPR 2.21, and PowerSDR 2.3.5 I found no
>>> problems whatsoever when VAC 4.11 was set up according to the instructions
>>> in the PowerSDR release notes and Tim's admonition to uncheck "enable
>>> channel mixing". There are no noticeable additional delays or any other
>>> anomalies that I could detect.
>>> 
>>> -- 
>>> Brian Lloyd, WB6RQN/J79BPL
>>> 3191 Western Dr.
>>> Cameron Park, CA 95682
>>> br...@lloyd.com
>>> +1.767.617.1365 (Dominica)
>>> +1.916.877.5067 (USA)
>>> ___
>>> FlexRadio Systems Mailing List
>>> FlexRadio@flex-radio.biz
>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>>> Knowledge Base: http://kc.flexradio.com/  Homepage: 
>>> http://www.flexradio.com/
>> 
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 on WinXP

[Tim Ellison]

The new driver uses a streaming architecture rather than an interrupt / 
DPC architecture.  This ensures that VAC transfers the bit-perfect audio 
stream between PowerSDR and your third-party sound card based 
application more efficiently and doesn't drop audio buffers like 
previous versions.


Tim Ellison

On 3/14/2012 11:15 PM, Jim Jannuzzo wrote:

But does 4.11 add anything for us?  Does it correct any wrongs that affect Flex 
radios?  If not, then I may not chase the state of Eugene's art. Jim
  >  Date: Wed, 14 Mar 2012 17:41:27 -0700

From: brian-wb6...@lloyd.com
To: flexradio@flex-radio.biz; flexra...@yahoogroups.com; flexe...@flex-radio.biz
Subject: [Flexradio] VAC 4.11 on WinXP

Just a quick note to say that I have installed VAC 4.11 on WinXP SP3. In
quick testing with fldigi 3.21.33, WSPR 2.21, and PowerSDR 2.3.5 I found no
problems whatsoever when VAC 4.11 was set up according to the instructions
in the PowerSDR release notes and Tim's admonition to uncheck "enable
channel mixing". There are no noticeable additional delays or any other
anomalies that I could detect.

--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
br...@lloyd.com
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 Install notice

[Tim Ellison, W4TME]

Here is the deal.  We need to publish a set of parameters compatible 
with all of our radios, so the lowest common denominator is the 
FLEX-1500 which runs at 48 kHz.  So we are going to maintain that the 
default sampling rate for the VAC cable from a Windows perspective is 
48kHz.  PowerSDR will over-ride that and set the cable sampling rate to 
what ever you set it at unless the digital mode programs forces it to 
something different.  In the case of the later condition, it is best to 
have the sampling rate at an even multiple of 48, 96 & 192, so 48 kHz is 
still the best fall back default.


Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo


On 3/15/2012 8:14 AM, Alan P. Biddle wrote:

Tim,

Shortly after 2.3.5 came out, there were list discussions about taking
advantage of the higher VAC sampling rates, and changing the default cable
SR to 192 kHz from the 48 kHz in the KB article.  There are 16 and 24 bit
"Studio Quality" selections.  Is there an official Flex do/don't on going to
higher cable rates?

Alan
WA4SCA

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME
Sent: Wednesday, March 14, 2012 3:29 PM
To: Flex Radio
Subject: [Flexradio] VAC 4.11 Install notice

When you uninstall the old version of VAC to install the new one,
Windows will change the default sampling rate of the VAC cable to 44.1
kHz, so you will need to reconfigure them for 48 kHz

See the following KB article for info on how to do it.
http://kc.flexradio.com/KnowledgebaseArticle50504.aspx

-Tim

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VAC 4.11 Install notice

[Alan P. Biddle]

Tim,

Shortly after 2.3.5 came out, there were list discussions about taking
advantage of the higher VAC sampling rates, and changing the default cable
SR to 192 kHz from the 48 kHz in the KB article.  There are 16 and 24 bit
"Studio Quality" selections.  Is there an official Flex do/don't on going to
higher cable rates?

Alan
WA4SCA 

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME
Sent: Wednesday, March 14, 2012 3:29 PM
To: Flex Radio
Subject: [Flexradio] VAC 4.11 Install notice

When you uninstall the old version of VAC to install the new one, 
Windows will change the default sampling rate of the VAC cable to 44.1 
kHz, so you will need to reconfigure them for 48 kHz

See the following KB article for info on how to do it.
http://kc.flexradio.com/KnowledgebaseArticle50504.aspx

-Tim
-- 
Tim Ellison, W4TME
Product Management, Sales & Support
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] 3000 for sale

[Michael Walker]

Hi All

I'm in the process of upgrading my station to a 5000 which makes my 3000
surplus to my needs.

The 3000 is in wonderful condition and has the latest factory preamp mod on.

I'm looking for $1500 and we can discuss shipping.

Michael Walker va3mw

email me at m...@portcredit.net rather than replying to this email.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/