Re: [Flexradio] Flex-5000 transverter satellite operation option.

2012-06-01 Thread Bill Bordy, NJ1H 

The last sentence should have been:

Consider the transverter route to get on satellites if the VU5K option 
isn't viable.



On 6/2/2012 12:02 AM, Bill Bordy, NJ1H wrote:
Call me frugal. I bought a Microwave Modules 70cm transverter for $80 
at the local hamfest and a 2M Janel Laboratories downconverter for $2, 
yes, two dollars. They both work fine with my Flex-5000A . I operate 
the mode B satellites with them and my Flex-5000. I do have GASFET 
preamps in front of both of them. They perform frequency tracking with 
SatPC32. The PowerSDR XVTRs setup panel handles the frequency 
translation math. I also had a chance to buy a 2M Microwave Modules 
transverter for $150, but I passed. I regret that and should have 
bought it. The point is, the Flex-5000 is an excellent satellite radio 
with external transceiver modules. I also have a FT-736R that I 
operated satellite for years with, and I prefer the Flex-5000 with the 
transverter/converter setup.


Being able to see the whole satellite passband, call CQ, monitor your 
CQ frequency and look for other signals in the downlink passband at 
the same time is really slick. Consider the transverter route to get 
on satellites if the VU5K operation isn't viable.


73,
Bill
NJ1H


On 6/1/2012 7:04 PM, Craig Gagner wrote:
And so the shift begins ... I doubt I will be purchasing one of the 
new 6000
series as it doesn't do 70cm and it took me a long time to get a 
5000, the

prices quoted are way out of my reach. Maybe Flex can come up with a new
design stand alone 2m 70cm rig for satellite work. No way I could 
justify
$1400 for a module on a 5000 especially since its basically obsolete 
with

the latest news posted.

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Terry Maurice
Sent: Friday, June 01, 2012 4:37 PM
To: Greg Jurrens
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VU5K End of Production Notice

Sorry to hear that you are discontinuing this module.  I recently
upgraded my Flex 5000A with the VU5K and this announcement leaves me
wondering if future versions of PowerSDR will continue to support the
module.

Additionally, there are a few things about the present software that are
not fully integrated with the VU5K module, such as showing that it is
connected to Antenna 1 for TX when it is on its own independent antenna.
Also, an antenna software bypass loop for the VU5K module would 
allow

the use of a preamplifier to be used with the VU5K.  Is that possible or
does it need separate relays?

Terry





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Flex-5000 transverter satellite operation option.

2012-06-01 Thread Bill Bordy, NJ1H 
Call me frugal. I bought a Microwave Modules 70cm transverter for $80 at 
the local hamfest and a 2M Janel Laboratories downconverter for $2, yes, 
two dollars. They both work fine with my Flex-5000A . I operate the mode 
B satellites with them and my Flex-5000. I do have GASFET preamps in 
front of both of them. They perform frequency tracking with SatPC32. The 
PowerSDR XVTRs setup panel handles the frequency translation math. I 
also had a chance to buy a 2M Microwave Modules transverter for $150, 
but I passed. I regret that and should have bought it. The point is, the 
Flex-5000 is an excellent satellite radio with external transceiver 
modules. I also have a FT-736R that I operated satellite for years with, 
and I prefer the Flex-5000 with the transverter/converter setup.


Being able to see the whole satellite passband, call CQ, monitor your CQ 
frequency and look for other signals in the downlink passband at the 
same time is really slick. Consider the transverter route to get on 
satellites if the VU5K operation isn't viable.


73,
Bill
NJ1H


On 6/1/2012 7:04 PM, Craig Gagner wrote:

And so the shift begins ... I doubt I will be purchasing one of the new 6000
series as it doesn't do 70cm and it took me a long time to get a 5000, the
prices quoted are way out of my reach. Maybe Flex can come up with a new
design stand alone 2m 70cm rig for satellite work. No way I could justify
$1400 for a module on a 5000 especially since its basically obsolete with
the latest news posted.

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Terry Maurice
Sent: Friday, June 01, 2012 4:37 PM
To: Greg Jurrens
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VU5K End of Production Notice

Sorry to hear that you are discontinuing this module.  I recently
upgraded my Flex 5000A with the VU5K and this announcement leaves me
wondering if future versions of PowerSDR will continue to support the
module.

Additionally, there are a few things about the present software that are
not fully integrated with the VU5K module, such as showing that it is
connected to Antenna 1 for TX when it is on its own independent antenna.
Also, an antenna software bypass loop for the VU5K module would allow
the use of a preamplifier to be used with the VU5K.  Is that possible or
does it need separate relays?

Terry





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VU5K End of Production Notice

2012-06-01 Thread Craig Gagner 
And so the shift begins ... I doubt I will be purchasing one of the new 6000
series as it doesn't do 70cm and it took me a long time to get a 5000, the
prices quoted are way out of my reach. Maybe Flex can come up with a new
design stand alone 2m 70cm rig for satellite work. No way I could justify
$1400 for a module on a 5000 especially since its basically obsolete with
the latest news posted. 

-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Terry Maurice
Sent: Friday, June 01, 2012 4:37 PM
To: Greg Jurrens
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] VU5K End of Production Notice

Sorry to hear that you are discontinuing this module.  I recently 
upgraded my Flex 5000A with the VU5K and this announcement leaves me 
wondering if future versions of PowerSDR will continue to support the 
module.

Additionally, there are a few things about the present software that are 
not fully integrated with the VU5K module, such as showing that it is 
connected to Antenna 1 for TX when it is on its own independent antenna. 
   Also, an antenna software bypass loop for the VU5K module would allow 
the use of a preamplifier to be used with the VU5K.  Is that possible or 
does it need separate relays?

Terry





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] VU5K End of Production Notice

2012-06-01 Thread Terry Maurice 
Sorry to hear that you are discontinuing this module.  I recently 
upgraded my Flex 5000A with the VU5K and this announcement leaves me 
wondering if future versions of PowerSDR will continue to support the 
module.


Additionally, there are a few things about the present software that are 
not fully integrated with the VU5K module, such as showing that it is 
connected to Antenna 1 for TX when it is on its own independent antenna. 
  Also, an antenna software bypass loop for the VU5K module would allow 
the use of a preamplifier to be used with the VU5K.  Is that possible or 
does it need separate relays?


Terry

On 01/06/2012 13:46, Greg Jurrens wrote:

FLEX-5000 Owners:

We regret to announce that we've had to make the difficult decision to end
production of the VU5K VHF/UHF Module for the FLEX-5000.  This decision was
driven by continued component (un)availability making deliveries
unreliable.  One of the component families in the module has gone obsolete
and there isn't a viable replacement for our design.

We've convinced the component manufacturer to support us with parts for a
"last time buy" so we would like to offer the same "Last Call" notice to
our valued  FLEX-5000 customers.  The lead time for the modules will be
10-12 weeks so we will work hard to minimize your downtime.

If you would like to add the VU5K module to your FLEX-5000, please contact
us before June 14 so we can get you on the list.  You can order online or
call sales at 512-535-4713.  The price is $1397.00 plus return shipping.  Once
we get everything ready, our service team will coordinate with you for an
RMA to ship your radio in for the upgrade.

We apologize for the short notice on this announcement.  Unfortunately it
just isn't feasible for us to continue producing the VU5K module.  Rest
assured we will maintain plenty of repair components to service your VU5K
and your FLEX-5000 for years to come.

Thanks for your understanding and continued support of FlexRadio Systems.

73,
Greg




--
*VE3XTM* EN93un
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FIRE WIRE CARD

2012-06-01 Thread dan edwards 
if i try a pci firewire card in different slots, i can usually find one...have 
to play 'musical chairs' though...

--- On Fri, 6/1/12, Neal Campbell  wrote:

From: Neal Campbell 
Subject: Re: [Flexradio] FIRE WIRE CARD
To: "dan edwards" 
Cc: y...@aol.com, flexradio@flex-radio.biz
Date: Friday, June 1, 2012, 8:23 PM

If at all possible but if not, trust the DPCs to tell you if there is a problem.

73
Neal
On Jun 1, 2012, at 4:21 PM, dan edwards wrote:

> don't we still look for and un-shared interrupt in device manager?  73, w5xz, 
> dan
> 
> --- On Fri, 6/1/12, Neal Campbell  wrote:
> 
> From: Neal Campbell 
> Subject: Re: [Flexradio] FIRE WIRE CARD
> To: y...@aol.com
> Cc: flexradio@flex-radio.biz
> Date: Friday, June 1, 2012, 7:53 PM
> 
> Dale, 
> 
> If the unit has PCI slots (and one is free) use this card
> http://www.amazon.com/3-Port-Firewire-Adapter-Card/dp/B000HDKVDQ/ref=sr_1_4?ie=UTF8&qid=1338580356&sr=8-4
> 
> Otherwise, use this card
> http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1338580396&sr=1-1
> 
> 73
> Neal
> On Jun 1, 2012, at 3:49 PM, y...@aol.com wrote:
> 
>> ? 
>> ??? Quick question ,just bought a 3000 and will need to add a firewire card 
>> to the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
>> thanks
>> ?dale wt4t
>> 
>> 
>> 
>> 
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FIRE WIRE CARD

2012-06-01 Thread Neal Campbell 
If at all possible but if not, trust the DPCs to tell you if there is a problem.

73
Neal
On Jun 1, 2012, at 4:21 PM, dan edwards wrote:

> don't we still look for and un-shared interrupt in device manager?  73, w5xz, 
> dan
> 
> --- On Fri, 6/1/12, Neal Campbell  wrote:
> 
> From: Neal Campbell 
> Subject: Re: [Flexradio] FIRE WIRE CARD
> To: y...@aol.com
> Cc: flexradio@flex-radio.biz
> Date: Friday, June 1, 2012, 7:53 PM
> 
> Dale, 
> 
> If the unit has PCI slots (and one is free) use this card
> http://www.amazon.com/3-Port-Firewire-Adapter-Card/dp/B000HDKVDQ/ref=sr_1_4?ie=UTF8&qid=1338580356&sr=8-4
> 
> Otherwise, use this card
> http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1338580396&sr=1-1
> 
> 73
> Neal
> On Jun 1, 2012, at 3:49 PM, y...@aol.com wrote:
> 
>> ? 
>> ??? Quick question ,just bought a 3000 and will need to add a firewire card 
>> to the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
>> thanks
>> ?dale wt4t
>> 
>> 
>> 
>> 
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FIRE WIRE CARD

2012-06-01 Thread dan edwards 
don't we still look for and un-shared interrupt in device manager?  73, w5xz, 
dan

--- On Fri, 6/1/12, Neal Campbell  wrote:

From: Neal Campbell 
Subject: Re: [Flexradio] FIRE WIRE CARD
To: y...@aol.com
Cc: flexradio@flex-radio.biz
Date: Friday, June 1, 2012, 7:53 PM

Dale, 

If the unit has PCI slots (and one is free) use this card
http://www.amazon.com/3-Port-Firewire-Adapter-Card/dp/B000HDKVDQ/ref=sr_1_4?ie=UTF8&qid=1338580356&sr=8-4

Otherwise, use this card
http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1338580396&sr=1-1

73
Neal
On Jun 1, 2012, at 3:49 PM, y...@aol.com wrote:

> ? 
> ??? Quick question ,just bought a 3000 and will need to add a firewire card 
> to the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
> thanks
> ?dale wt4t
> 
> 
> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FIRE WIRE CARD

2012-06-01 Thread Neal Campbell 
Dale, 

If the unit has PCI slots (and one is free) use this card
http://www.amazon.com/3-Port-Firewire-Adapter-Card/dp/B000HDKVDQ/ref=sr_1_4?ie=UTF8&qid=1338580356&sr=8-4

Otherwise, use this card
http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1338580396&sr=1-1

73
Neal
On Jun 1, 2012, at 3:49 PM, y...@aol.com wrote:

> ? 
> ??? Quick question ,just bought a 3000 and will need to add a firewire card 
> to the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
> thanks
> ?dale wt4t
> 
> 
> 
> 
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] FIRE WIRE CARD

2012-06-01 Thread Tim Ellison 

ExpressCard, PCI or PCIe slots?

Tim Ellison

On 6/1/2012 3:49 PM, y...@aol.com wrote:

?
??? Quick question ,just bought a 3000 and will need to add a firewire card to 
the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
thanks
?dale wt4t




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] FIRE WIRE CARD

2012-06-01 Thread y...@aol.com 
? 
??? Quick question ,just bought a 3000 and will need to add a firewire card to 
the gateway I-5, 4gig of ram computer. Whats my best choice for a card?
thanks
?dale wt4t

 
 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] looking for 3000

2012-06-01 Thread y...@aol.com 
 THANKS TO ALL, FOUND A 3000.
Dale wt4t

 



-Original Message-
From: yash 
To: flexradio 
Sent: Fri, Jun 1, 2012 2:30 pm
Subject: [Flexradio] looking for 3000

 
 
 
 Looking for a nice flex 3000,if you have one to sell please contact me off  
list. 
thanks 
dale wt4t 
y...@aol.com 
239 283 2665 
 
  
 
___ 
FlexRadio Systems Mailing List 
FlexRadio@flex-radio.biz 
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz 
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ 
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/ 
 

  

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] looking for 3000

2012-06-01 Thread y...@aol.com 
 Looking for a nice flex 3000,if you have one to sell please contact me off 
list.
thanks
dale wt4t
y...@aol.com
239 283 2665

 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] VU5K End of Production Notice

2012-06-01 Thread Greg Jurrens 
FLEX-5000 Owners:

We regret to announce that we've had to make the difficult decision to end
production of the VU5K VHF/UHF Module for the FLEX-5000.  This decision was
driven by continued component (un)availability making deliveries
unreliable.  One of the component families in the module has gone obsolete
and there isn't a viable replacement for our design.

We've convinced the component manufacturer to support us with parts for a
"last time buy" so we would like to offer the same "Last Call" notice to
our valued  FLEX-5000 customers.  The lead time for the modules will be
10-12 weeks so we will work hard to minimize your downtime.

If you would like to add the VU5K module to your FLEX-5000, please contact
us before June 14 so we can get you on the list.  You can order online or
call sales at 512-535-4713.  The price is $1397.00 plus return shipping.  Once
we get everything ready, our service team will coordinate with you for an
RMA to ship your radio in for the upgrade.

We apologize for the short notice on this announcement.  Unfortunately it
just isn't feasible for us to continue producing the VU5K module.  Rest
assured we will maintain plenty of repair components to service your VU5K
and your FLEX-5000 for years to come.

Thanks for your understanding and continued support of FlexRadio Systems.

73,
Greg


-- 
Greg Jurrens - K5GJ
VP, Sales and Marketing
FlexRadio Systems
4616 W Howard Lane Ste 1-150
Austin, TX 78728
T: 512-535-4713 <512-535-4713%20x203> x203 <512-535-4713%20x203>
E: g...@flexradio.com 
SKYPE: WD0ACD
“Tune in Excitement”
PowerSDR(TM) is a trademark of FlexRadio Systems
Web: www.flexradio.co m



-- 
Greg Jurrens - K5GJ
VP, Sales and Marketing
FlexRadio Systems
4616 W Howard Lane Ste 1-150
Austin, TX 78728
T: 512-535-4713 x203
E: g...@flexradio.com
SKYPE: WD0ACD
“Tune in Excitement” ™
PowerSDR(TM) is a trademark of FlexRadio Systems
Web: www.flexradio.com 
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] ***SPAM*** Re:

2012-06-01 Thread l s 

wow this is intense you should check this out 
http://www.spacnews.net/biz/?read=6811621


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/