[Flexradio] PSDR v2.7.2

[Ron Kolarik]

I just did the upgrade, all went smoothly including DT.
I'm getting some pretty bad flickering on the waterfall and
panafall displays, changing frame rates has no effect.
Flex 5k, Win7 32 bit. HD6870 video.

Ron
K0IDT


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Offering of a new solution to SDR-1000 users

[Bruce Mills - KL7JDR]

Only 3 Days Left !


Dear SDR-1000 users,

Let me present a new solution for you.

It is called USB2SDR, is ready-made and whereas so far it was used in
homebrew rigs, now by including the top notch ADC AK5394A ADC having 123dB
dynamic range and additionally a dedicated controller specifically for
SDR-1000 DB25 interface, comes to you providing seamless operation.

As the name indicates, it has a USB connection from your PC to your SDR rig
setup.
USB2SDR, gets in between your PC and SDR-1000 rig, it replaces any plain
audio card you currently have, with a dedicated SDR DSP designed device,
and from then on all functions of your radio are controlled from a USB port
of your PC.

USB2SDR is a DSP device designed from radio amateurs for radio amateurs and
gives to current SDR-1000 users the ability to fully utilize rig's
abilities and give a boost at maximum in the performance of their radio.
All that with an easy to setup total solution as it handles and solves both
control interfacing and ADC.

ADC/DAC configuration is 4in and 4out concurrent channels, and the latest
PowerSDR v2.5.3 for SDR-1000 will be given, additionally ammended,
including USB2SDR in the supported list so you will have ease of setup.

So your radio will get a single device offering control via USB, the
ADC/DAC for I/Q and Mic/Speaker will also be via USB, all of them in a
single cable connection between your PC and USB2SDR. USB2SDR will have and
handle all other connections to your rig, the control interface to DB25,
the I/Q ADC/DAC, the audio mic/speaker and the CW key.

Dedicated drivers are implemented for that device, bypassing any windows
audio buffering and latency.

All windows environments are supported, W7 and W8 in 32 or 64 architectures.

Your familiar application, PowerSDR v2.5.3 will be there, yet now you will
be given the opportunity to have operation from all modern PC's or laptops
as they all have a USB 2.0 HS connection available.
And do that now with the increased performance of 123dB dynamic range from
the powerful AK5394A at full 192KHz.


The offering comes from the USB2SDR Indiegogo campaign here
-> http://www.indiegogo.com/projects/usb2sdr-software-defined-radio-startup

For any information you can contact me directly or post in the powersdr-iq
Yahoo! group here
-> http://groups.yahoo.com/neo/groups/powersdr-iq


Best regards & 73,
Christos SV1EIA


73's ,

Bruce - KL7JDR

Bruce W. Mills
P.O. Box 1500
31490 Echo Lake Road
Soldotna , Alaska
   99669

(907)262-4373 Home
(907)398-4595 Cell

kl7...@alaska.net




___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] Error setting setup parameter

[Steve Potter]

You know this is the first problem I have had on install since 2010

But trying to transfer database settings from 2.6.4 to 2.7.2 I get the above 
error with a generic .net error messga e "Object reference not set to an 
instance of an object"

Any quick cures?

Cheers
Steve


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR-DataTransfer Problem

[Burt]

Wise move



On Tuesday, December 17, 2013 4:29 PM, Paul Playford  wrote:
  



Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx


I thought those were features :-)
Paul, W8AEF


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR-DataTransfer Problem

[Paul Playford]

Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx


I thought those were features :-)
Paul, W8AEF

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR-DataTransfer Problem

[ric5]

I don't think I'm going to upgrade right now. My Flex 1500 is running just 
fine with 2.6.3558 ( Had problems with 2.6.4)

Think I will wait for all the bugs to get ironed out.
Rick Kd4jrx

--
From: "Rich - W3ZJ" 
Sent: Tuesday, December 17, 2013 3:36 PM
To: 
Subject: [Flexradio] PowerSDR-DataTransfer Problem

Here is what I found. If you make the mistake of attempting to start 
PSDR-DT while PSDR is running it pops up a message telling you that you 
must close PSDR first. If you then click cancel, close PSDR and attempt to 
start PSDR-DT again it will open but the Setup Data is wiped out and the 
Setup Data URL is gone. If you try to reenter the URL it won't let you do 
it. Maybe there is a magic key combination that will let you do it but I 
haven't found it and without it you are up the creek without a paddle. 
However, I found that the setup data is stored in
C:\ProgramData\FlexRadio 
Systems\PowerSDR-DataTransfer\PowerSDR-DataTransfer.xml (at least it is on 
Windows 8.1). Keep a backup copy of that file so you can replace the bad 
setup data with good data and you are back in business.


Tim, check this out and if I'm right you have another bug to write up 
here.


73, Rich - W3ZJ

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] while you are at it...

[steve]

While someone is looking at pre amp issues, in the existing 2.6.4, on 
7mhz ssb, the preamp selection for the flex 3000 does not work properly. 
It acts as an attenuator when pre 1 is selected.

Thanks
--
If you forward or copy this message, please delete any reference to my 
email address. Thanks


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PowerSDR-DataTransfer Problem

[Rich - W3ZJ]

Here is what I found. If you make the mistake of attempting to start 
PSDR-DT while PSDR is running it pops up a message telling you that you 
must close PSDR first. If you then click cancel, close PSDR and attempt 
to start PSDR-DT again it will open but the Setup Data is wiped out and 
the Setup Data URL is gone. If you try to reenter the URL it won't let 
you do it. Maybe there is a magic key combination that will let you do 
it but I haven't found it and without it you are up the creek without a 
paddle. However, I found that the setup data is stored in
C:\ProgramData\FlexRadio 
Systems\PowerSDR-DataTransfer\PowerSDR-DataTransfer.xml (at least it is 
on Windows 8.1). Keep a backup copy of that file so you can replace the 
bad setup data with good data and you are back in business.


Tim, check this out and if I'm right you have another bug to write up here.

73, Rich - W3ZJ

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] Speaker for 1500

[Michael Babineau]

Travis :

I am using the Bose Companion 2 speakers with my Flex-1500 and I really like 
them. 
The pair cost me less than $100. 

Michael VE3WMB 

P.S. Lots of audio out of the headphone jack on the speakers to drive my Yahama 
CM-500 headset.
 
P.P.S. A couple of nice features, they run on 12V so if you are using a 
Rigrunner or some other
power distribution system in your shack you might choose to power them from 
that instead of the 
supplied wall-wart, also they allow input from a 2nd audio device (i.e. you can 
hook up a 2nd rig to
to them) and they sound great. 


>Date: Mon, 16 Dec 2013 12:27:59 -0600
>From: Travis Burgess 
>To: "flexradio@flex-radio.biz" 
>Subject: [Flexradio] Speaker for 1500
>Message-ID: 
>Content-Type: text/plain; charset="iso-8859-1"

>Is there a recommendation for a decent, inexpensive, powered speaker to use 
>with my Flex-1500?I have an old computer speaker but it repeats everything 
>back to me; quite disconcerting >to say the least.   There is not enough drive 
>out of the speaker jack to power the head phones I have, includinga Heil 
>Proset.
>TravisK5HTB  
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Lee Mushel]

Gosh, I would hope that this data transfer thing doesn't prevent anyone from 
enjoying 2.7.2 !   Gerald is giving us something really wonderful and I can 
tell you I am most pleased!   This release is a really super advancement of 
PowerSDR !


73

Lee  K9WRU
- Original Message - 
From: "Don" 

To: "[FlexRadio]" 
Sent: Tuesday, December 17, 2013 9:13 AM
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available



Patrick, NJ5G

I would say go for it.  Not everyone is having the problems that
has been listed here.

Good Luck and enjoy.

73
Don, kd6hq





___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PSDR v2.7.2 Preamp Anomolie

[Tim Ellison, W4TME]

Please see my comments below

Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo
On 12/17/2013 12:46 PM, Michael Logan, KB7IUV wrote:

To recreate:

1)Go to 20 meters and set Preamp to "Pre2"'
2)Go to 40 meters and set Preamp to "Pre1"
3)Go back to 20 meters, Preamp shows "Pre1" (but is is not really)
4)Set Preamp to "Pre2" notice the lack of difference (because it 
really is still on Pre2)

5)Set Preamp to "Pre1" and notice the difference.
Yep, you are right.  The premap annunciator is not being updated 
correctly on band changes.  I have written this up as a defect and put 
it into the PowerSDR bug tracker.


Thanks for the report.


Here's another:

1)For 20 meters and 15 meters, set Preamp to "Pre2"
2)Go back to 40 meters and make sure its still on "Pre1"
3)Go back to 20 meters and notice it says "Pre1" (even though you 
left it at Pre2)

4)Go to 15 meters and notice it changes to "Pre2"
5)Go to 20 meters and notice it now says "Pre2" like it should.

Conclusion:  The display of the actual preamp setting seems to no 
coincide with actual setting.  Anyone else see this?


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PSDR 2.7- RX2 Antenna Switching

[Tim Ellison, W4TME]

Jim,

See my comments in-line below.

Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo
On 12/17/2013 12:29 PM, Jim Jannuzzo wrote:



  The choice of "ANT 1" for RX2 seems to have been eliminated in this version.
It has not.  I just verified that ANT-1 is a valid option for RX2 Do a 
reset to factory defaults to reset the database and check again.

This is bad for my install:
I have ANT 2 going to an amp and then a SteppIR vertical, and ANT1 going 
directly to a dipole.  Previously, I could use PSDR's antenna switching to 
direct the dipole either to RX2 for diversity, or to the Flex' TX / RX1 for 
barefootin'.   Why was this feature eliminated?
It seems I must change the dipole coax connector from a 259 to a a BNC, so that 
I can hook the dipole to a receive-only input.  I hate that.
p.s.  Thanks for fixing the Mic Boost in this release.
Jim KJ2P

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PSDR v2.7.2 Preamp Anomolie

[Michael Logan, KB7IUV]

To recreate:

1)Go to 20 meters and set Preamp to "Pre2"'
2)Go to 40 meters and set Preamp to "Pre1"
3)Go back to 20 meters, Preamp shows "Pre1" (but is is not really)
4)Set Preamp to "Pre2" notice the lack of difference (because it 
really is still on Pre2)

5)Set Preamp to "Pre1" and notice the difference.

Here's another:

1)For 20 meters and 15 meters, set Preamp to "Pre2"
2)Go back to 40 meters and make sure its still on "Pre1"
3)Go back to 20 meters and notice it says "Pre1" (even though you 
left it at Pre2)

4)Go to 15 meters and notice it changes to "Pre2"
5)Go to 20 meters and notice it now says "Pre2" like it should.

Conclusion:  The display of the actual preamp setting seems to no 
coincide with actual setting.  Anyone else see this?

--
73's de Mike, KB7IUV
http://qrz.com/db/KB7IUV

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PSDR 2.7- RX2 Antenna Switching

[Jim Jannuzzo]

 The choice of "ANT 1" for RX2 seems to have been eliminated in this version.  
This is bad for my install: 
I have ANT 2 going to an amp and then a SteppIR vertical, and ANT1 going 
directly to a dipole.  Previously, I could use PSDR's antenna switching to 
direct the dipole either to RX2 for diversity, or to the Flex' TX / RX1 for 
barefootin'.   Why was this feature eliminated?   
It seems I must change the dipole coax connector from a 259 to a a BNC, so that 
I can hook the dipole to a receive-only input.  I hate that.
p.s.  Thanks for fixing the Mic Boost in this release.
Jim KJ2P  
  
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Ronald G. Parsons]

Just swallowing a huge serving of Humble Pie

I fixed up 2.6.4 so it would work with the new FireWire driver and loaded PSDR 
2.6.4 on both Flex-1500 and Flex –3000. I could have sworn that I had adjusted 
the EQ on the 1500 (in fact I’m sure I did) but now the EQ on 2.6.4 on the 1500 
on my new transmit profiles is flat. Can’t explain.

So ... there seem to be NO transfer problems from 2.6.4 to 2.7.2 at this site. 

Ron W5RKN

From: Ronald G. Parsons 
Sent: Monday, December 16, 2013 8:35 PM
To: wa4...@gmail.com ; 'David W0DHB' ; tm.st...@verizon.net ; 
t...@flexradio.com ; flexradio@flex-radio.biz 
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

I followed Dave’s lead and did the uninstalls and installs. Then ran PSDRDT 
going directly from 2.6.4 to 2.7.2. During the beta, I had transferred 2.6.4 to 
2.7.0 to 2.7.1 to 2.7.2.

This time all went well EXCEPT the EQ on the Flex 1500 on the new 2.7.2 was 
flat. I would swear that the EQ on the 1500 on 2.6.4 was not flat as I had just 
created the new transmit profiles on both the 1500 and 3000 and they all were 
not flat. I could be wrong, but I don’t think so. The transferred EQ on the 
3000 was not flat.

And again, as I had reported before, on the 1500, when I first changed the 
transmit profile, the MIC gain was incorrect. This corrected itself and a later 
load of the transmit profile.  

No error messages appeared.

Ron W5RKN

From: wa4...@gmail.com 
Sent: Monday, December 16, 2013 8:12 PM
To: Ronald G. Parsons ; 'David W0DHB' ; tm.st...@verizon.net ; 
t...@flexradio.com ; flexradio@flex-radio.biz 
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

I am not a beta tester though I had Ray’s old program installed.  I have 
removed it after the upgrade, which did not retroactively solve the problem.

73s,
WA4SCA



From: Ronald G. Parsons
Sent: ‎Monday‎, ‎December‎ ‎16‎, ‎2013 ‎7‎:‎38‎ ‎PM
To: 'David W0DHB', tm.st...@verizon.net, t...@flexradio.com, 
flexradio@flex-radio.biz

I just checked mine and noticed the same thing -- three instances of PSDRDT 
and three instances of PSDR corresponding to the beta installs and 2.7.2. 
The date on the .exe file for PSDRDT was 12/12 which did not correspond to 
any of the beta install dates but was probably Ray's last compile.

I think Ray should check to see if a prior instance of PSDRDT exists when a 
new one is installed and remove the old one (or at least ask the person 
installing).

However this arrangement did not cause me an error as far as I know, but I 
think I'll follow Dave's lead and uninstall and reinstall just to make sure.

Ron W5RKN

-Original Message- 
From: David W0DHB
Sent: Monday, December 16, 2013 7:06 PM
To: tm.st...@verizon.net ; t...@flexradio.com ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Couple of observations

I ran PowerSDR-Datatransfer on a second database and got the errors as
described by Alan originally

Went to uninstall PSDRDT and found I had three instances in the programs and
features menu (probably from installing beta releases leading up to 2.7.2)
Uninstalled all 3
Uninstalled PSDR 2.7.2
Uninstalled SDRDataTransfer (Ray's version)
Rebooted
Reinstalled PSD 2.7.2
Did the conversion from 2.6.4 to 2.7.2 (worked fine)
Tried another conversion during the same session , worked now
Closed PSDR DT
Reopen PSDR DT and conversions worked.
Rebooted and was still able to do conversions, no sign of original error

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Monday, December 16, 2013 4:30 PM
To: t...@flexradio.com; flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Gents:

I am getting the same errors as reported by others.  Did the "update setup
data" prior to trying the first time to do the transfer.  That worked the
first time, but on second try got the " PROCEEDURE: UpdateSetupData ERROR:
Converting from string "" to type 'Date is not valid." Error as well.

Tried both standard and expert modes.

Sure hoping for some ideas/fixes.

That said, this looks like a nice PSDR upgrade.  Glad Flex is still working
on keeping this product line up to date.

Standing by here.  :)

73, Tom
K1FR




-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: Monday, December 16, 2013 4:26 PM
To: t...@flexradio.com; apbid...@mailaps.org; flexradio@flex-radio.biz
Cc: 'CC'
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Tim,

Guy sent you the program update error.  Here is the setupdata error.  I
trust you will forward it to Ray.  :)

73s,

Alan
WA4SCA


<-Original Message-
mailto:flexradio-boun...@flex-radio.biz] On mailto:t...@flexradio.com>
http://www.flexradio.com> <  Tim,
<>
<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<>
<> I also have 2.4.4, 2.5.3 and selected them, with the same 
<> I tried all 3 using Expect mode, same message.

Re: [Flexradio] SDRDataTransfer No Longer Available

[Rich - W3ZJ]

I read the instructions before installing and don't recall seeing 
anything about updating the PowerSDR-DataTrnasfer Setup Data but that's 
probably what did the trick. Now it seems to be working fine. That URL 
that It's giving you a big warning not to change should be 
http://www.flexradio.com/Data/Doc/ and was completely missing from my 
original installation.


73, Rich - W3ZJ

Patrick Greenlee wrote:
So (he enquired meekly) is it safe for us mere humans to upgrade to 
the new PSDR release yet or should we wait for the wailing siren 
signal to proclaim the "ALL CLEAR" pattern?


Anything besides blind obedience to the instructions required?

Thanks for any assistance as I am NOT a PC guru.

Patrick NJ5G

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Don]

Patrick, NJ5G

I would say go for it.  Not everyone is having the problems that
has been listed here.

Good Luck and enjoy.

73
Don, kd6hq

-Original Message- 
From: Patrick Greenlee

Sent: Tuesday, December 17, 2013 6:38 AM
To: t...@flexradio.com ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

So (he enquired meekly) is it safe for us mere humans to upgrade to the new
PSDR release yet or should we wait for the wailing siren signal to proclaim
the "ALL CLEAR" pattern?

Anything besides blind obedience to the instructions required?

Thanks for any assistance as I am NOT a PC guru.

Patrick NJ5G

-Original Message- 
From: Tim Ellison, W4TME

Sent: Tuesday, December 17, 2013 8:16 AM
To: apbid...@mailaps.org ; t...@flexradio.com ; flexradio@flex-radio.biz
Cc: 'CC'
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Thanks.

Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo
On 12/16/2013 4:25 PM, Alan wrote:

Tim,

Guy sent you the program update error.  Here is the setupdata error.  I 
trust you will forward it to

Ray.  :)

73s,

Alan
WA4SCA


<-Original Message-
mailto:flexradio-boun...@flex-radio.biz] On
mailto:t...@flexradio.com>
http://www.flexradio.com>
<
 Tim,
<>
<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<>
<> I also have 2.4.4, 2.5.3 and selected them, with the same

<> I tried all 3 using Expect mode, same message.
<>
<> 73s,
<>
<> Alan
<> WA4SCA
<>
<>
<>
<>
<> <-Original Message-
<> mailto:flexradio-boun...@flex-radio.biz] On
<> <
<>  <
<>  <
<>  <
<><4616 W Howard Ln Ste 1-150
<>   mailto:t...@flexradio.com>
<> http://www.flexradio.com>
<> <
<>   <>   Ray,
<> <>
<> <> Glad they picked up another excellent bit of software!
<> <>
<> <> As usual, I have managed to break it.  After updating
<>  <> complete success, I went back to look at the transfer
<>  <> a source file, any source file including the one I used
<>  <>
<> <> Error setting 'SourceFile' value!
<> <> Error setting value:  Object reference not set to an
<>  <>
<> <> This is followed by a second box:
<> <>
<> <> The database is not a complete database.
<> <> Select a different database of open PowerSDR and re-create
<>  <> PowerSDR properly after you have re-created the database.
<> <>
<> <> I have opened and closed PowerSDR, and rebooted with no
<>  <> but I wanted to report this.  WIN7 Pro, 32-bit.
<> <>
<> <> 73s,
<> <>
<> <> Alan
<> <> WA4SCA
<> <>
<> <>
<> <>
<> <> <-Original Message-
<> <> mailto:flexradio-boun...@flex-radio.biz] On
<> <>  <>  <>  <>  <> <
<> <>   <>  <>  <>  <>  <>  <> <
<> <>  <>  <>   <>   <>  <> <
<> <>  <>  <>  <> <
<> <>  <>  <>  <> <
<> <> <73, Ray, K9DUR
<> <>  <> <
<> <> <
<> <> <
<> <> <___
<> <>  <>  <>
< <> http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> http://kc.flexradio.com/  Homepage:
<> <>  <> <
<> <>
<> <>
<> <> ___
<> <> FlexRadio Systems Mailing List
<> <> FlexRadio@flex-radio.biz
<> <>
 <> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> Knowledge Base: http://kc.flexradio.com/  Homepage:
<>  <
<> <___
<>    http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> http://kc.flexradio.com/  Homepage:
<>  <
<>
<
<___
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
http://www.mail-archive.com/flexradio%40flex-radio.biz/
http://kc.flexradio.com/  Homepage:

Re: [Flexradio] SDRDataTransfer No Longer Available

[Patrick Greenlee]

So (he enquired meekly) is it safe for us mere humans to upgrade to the new 
PSDR release yet or should we wait for the wailing siren signal to proclaim 
the "ALL CLEAR" pattern?


Anything besides blind obedience to the instructions required?

Thanks for any assistance as I am NOT a PC guru.

Patrick NJ5G

-Original Message- 
From: Tim Ellison, W4TME

Sent: Tuesday, December 17, 2013 8:16 AM
To: apbid...@mailaps.org ; t...@flexradio.com ; flexradio@flex-radio.biz
Cc: 'CC'
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Thanks.

Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo
On 12/16/2013 4:25 PM, Alan wrote:

Tim,

Guy sent you the program update error.  Here is the setupdata error.  I 
trust you will forward it to

Ray.  :)

73s,

Alan
WA4SCA


<-Original Message-
mailto:flexradio-boun...@flex-radio.biz] On
mailto:t...@flexradio.com>
http://www.flexradio.com>
<
 Tim,
<>
<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<>
<> I also have 2.4.4, 2.5.3 and selected them, with the same

<> I tried all 3 using Expect mode, same message.
<>
<> 73s,
<>
<> Alan
<> WA4SCA
<>
<>
<>
<>
<> <-Original Message-
<> mailto:flexradio-boun...@flex-radio.biz] On
<> <
<>  <
<>  <
<>  <
<><4616 W Howard Ln Ste 1-150
<>   mailto:t...@flexradio.com>
<> http://www.flexradio.com>
<> <
<>   <>   Ray,
<> <>
<> <> Glad they picked up another excellent bit of software!
<> <>
<> <> As usual, I have managed to break it.  After updating
<>  <> complete success, I went back to look at the transfer
<>  <> a source file, any source file including the one I used
<>  <>
<> <> Error setting 'SourceFile' value!
<> <> Error setting value:  Object reference not set to an
<>  <>
<> <> This is followed by a second box:
<> <>
<> <> The database is not a complete database.
<> <> Select a different database of open PowerSDR and re-create
<>  <> PowerSDR properly after you have re-created the database.
<> <>
<> <> I have opened and closed PowerSDR, and rebooted with no
<>  <> but I wanted to report this.  WIN7 Pro, 32-bit.
<> <>
<> <> 73s,
<> <>
<> <> Alan
<> <> WA4SCA
<> <>
<> <>
<> <>
<> <> <-Original Message-
<> <> mailto:flexradio-boun...@flex-radio.biz] On
<> <>  <>  <>  <>  <> <
<> <>   <>  <>  <>  <>  <>  <> <
<> <>  <>  <>   <>   <>  <> <
<> <>  <>  <>  <> <
<> <>  <>  <>  <> <
<> <> <73, Ray, K9DUR
<> <>  <> <
<> <> <
<> <> <
<> <> <___
<> <>  <>  <>
< <> http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> http://kc.flexradio.com/  Homepage:
<> <>  <> <
<> <>
<> <>
<> <> ___
<> <> FlexRadio Systems Mailing List
<> <> FlexRadio@flex-radio.biz
<> <>
 <> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> Knowledge Base: http://kc.flexradio.com/  Homepage:
<>  <
<> <___
<>    http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> http://kc.flexradio.com/  Homepage:
<>  <
<>
<
<___
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
http://www.mail-archive.com/flexradio%40flex-radio.biz/
http://kc.flexradio.com/  Homepage:

Re: [Flexradio] SDRDataTransfer No Longer Available

[TM]

Rich:  This process worked for me as well.  Up and running as always. Thanks
to all!

73, Tom
K1FR

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rich
- W3ZJ
Sent: Tuesday, December 17, 2013 8:41 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

OK, following the lead of ON4AMG. I am not a beta tester so I had only one
copy of PSDR2.7.2 and PSDR-DT. However, I uinstalled and reinstalled both.
This time I ran PSDR-DT before doing anything else and selected Options. One
difference I noticed immediately was that the Setup Data URL box now had a
URL in it while before it was blank. So I did the Update Setup Data and this
time it worked indicating that there was a more recent version of the Setup
Data which I installed. I then started PSDR 2.7.2 and it came up correctly
with default settings. So I closed PSDR and restarted PSDR-DT and updated
the settings from V2.6.4. It went smoothly this time and all seems to be
well. I have no idea why it didn't install correctly the first time but
that's the story. Now to investigate the new features of V2.7.2.

Thanks for the tip Guy!

73, Rich - W3ZJ

Phil Cragg wrote:
> FWIW I'm getting all the same errors and I haven't been able to do the 
> transfer even once (from 2.6.4 to 2.7.2)
>
> Phil
> G3U
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Phil Cragg]

That's it :-)  Worked for me too. Thanks Rich

Phil
G3UGK

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rich
- W3ZJ
Sent: 17 December 2013 13:41
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

OK, following the lead of ON4AMG. I am not a beta tester so I had only one
copy of PSDR2.7.2 and PSDR-DT. However, I uinstalled and reinstalled both.
This time I ran PSDR-DT before doing anything else and selected Options. One
difference I noticed immediately was that the Setup Data URL box now had a
URL in it while before it was blank. So I did the Update Setup Data and this
time it worked indicating that there was a more recent version of the Setup
Data which I installed. I then started PSDR 2.7.2 and it came up correctly
with default settings. So I closed PSDR and restarted PSDR-DT and updated
the settings from V2.6.4. It went smoothly this time and all seems to be
well. I have no idea why it didn't install correctly the first time but
that's the story. Now to investigate the new features of V2.7.2.

Thanks for the tip Guy!

73, Rich - W3ZJ

Phil Cragg wrote:
> FWIW I'm getting all the same errors and I haven't been able to do the 
> transfer even once (from 2.6.4 to 2.7.2)
>
> Phil
> G3U
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Tim Ellison, W4TME]

Thanks.

Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems^(TM)
4616 W Howard Ln, Suite 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com 
Web: www.flexradio.com 

logo
On 12/16/2013 4:25 PM, Alan wrote:

Tim,

Guy sent you the program update error.  Here is the setupdata error.  I trust 
you will forward it to
Ray.  :)

73s,

Alan
WA4SCA


<-Original Message-
mailto:flexradio-boun...@flex-radio.biz] On
mailto:t...@flexradio.com>
http://www.flexradio.com>
<
 Tim,
<>
<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<>
<> I also have 2.4.4, 2.5.3 and selected them, with the same

<> I tried all 3 using Expect mode, same message.
<>
<> 73s,
<>
<> Alan
<> WA4SCA
<>
<>
<>
<>
<> <-Original Message-
<> mailto:flexradio-boun...@flex-radio.biz] On
<> <
<>  <
<>  <
<>  <
<><4616 W Howard Ln Ste 1-150
<>   mailto:t...@flexradio.com>
<> http://www.flexradio.com>
<> <
<>   <>   Ray,
<> <>
<> <> Glad they picked up another excellent bit of software!
<> <>
<> <> As usual, I have managed to break it.  After updating
<>  <> complete success, I went back to look at the transfer
<>  <> a source file, any source file including the one I used
<>  <>
<> <> Error setting 'SourceFile' value!
<> <> Error setting value:  Object reference not set to an
<>  <>
<> <> This is followed by a second box:
<> <>
<> <> The database is not a complete database.
<> <> Select a different database of open PowerSDR and re-create
<>  <> PowerSDR properly after you have re-created the database.
<> <>
<> <> I have opened and closed PowerSDR, and rebooted with no
<>  <> but I wanted to report this.  WIN7 Pro, 32-bit.
<> <>
<> <> 73s,
<> <>
<> <> Alan
<> <> WA4SCA
<> <>
<> <>
<> <>
<> <> <-Original Message-
<> <> mailto:flexradio-boun...@flex-radio.biz] On
<> <>  <>  <>  <>  <> <
<> <>   <>  <>  <>  <>  <>  <> <
<> <>  <>  <>   <>   <>  <> <
<> <>  <>  <>  <> <
<> <>  <>  <>  <> <
<> <> <73, Ray, K9DUR
<> <>  <> <
<> <> <
<> <> <
<> <> <___
<> <>  <>  <>
< <> http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> http://kc.flexradio.com/  Homepage:
<> <>  <> <
<> <>
<> <>
<> <> ___
<> <> FlexRadio Systems Mailing List
<> <> FlexRadio@flex-radio.biz
<> <>
 <> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> <> Knowledge Base: http://kc.flexradio.com/  Homepage:
<>  <
<> <___
<>    http://www.mail-archive.com/flexradio%40flex-radio.biz/
<> http://kc.flexradio.com/  Homepage:
<>  <
<>
<
<___
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
http://www.mail-archive.com/flexradio%40flex-radio.biz/
http://kc.flexradio.com/  Homepage:

Re: [Flexradio] SDRDataTransfer No Longer Available

[Rich - W3ZJ]

OK, following the lead of ON4AMG. I am not a beta tester so I had only 
one copy of PSDR2.7.2 and PSDR-DT. However, I uinstalled and reinstalled 
both. This time I ran PSDR-DT before doing anything else and selected 
Options. One difference I noticed immediately was that the Setup Data 
URL box now had a URL in it while before it was blank. So I did the 
Update Setup Data and this time it worked indicating that there was a 
more recent version of the Setup Data which I installed. I then started 
PSDR 2.7.2 and it came up correctly with default settings. So I closed 
PSDR and restarted PSDR-DT and updated the settings from V2.6.4. It went 
smoothly this time and all seems to be well. I have no idea why it 
didn't install correctly the first time but that's the story. Now to 
investigate the new features of V2.7.2.


Thanks for the tip Guy!

73, Rich - W3ZJ

Phil Cragg wrote:

FWIW I'm getting all the same errors and I haven't been able to do the
transfer even once (from 2.6.4 to 2.7.2)

Phil
G3U

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[Phil Cragg]

FWIW I'm getting all the same errors and I haven't been able to do the
transfer even once (from 2.6.4 to 2.7.2)

Phil
G3UGK

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: 17 December 2013 12:56
To: 'David W0DHB'; flexradio@flex-radio.biz
Cc: CC
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Hi Dave,

Since I was able to do a transfer, once, I am going to sit this one out and
play with the new 2.7.2. I didn't see anything for satellite operators in
the official list, but maybe I will find something. I figure the guys in
Austin and Terre Haute will have a proper fix worked out soon, and may even
need somebody to test it on.  :)

73s,

Alan
WA4SCA 


<-Original Message-
mailto:d...@w0dhb.net]
mailto:wa4...@gmail.com]
mailto:w5...@w5rkn.com>
mailto:d...@w0dhb.net> , mailto:flexradio-boun...@flex-radio.biz] On mailto:flexradio-boun...@flex-radio.biz] On mailto:flexradio-boun...@flex-radio.biz] On 
 <  Tim,
<<>
<<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<<>
<<> I also have 2.4.4, 2.5.3 and selected them, with the same <
<<> I tried all 3 using Expect mode, same message.
<<>
<<> 73s,
<<>
<<> Alan
<<> WA4SCA
<<>
<<>
<<>
<<>
<<> <-Original Message-
<<> mailto:flexradio-boun...@flex-radio.biz]
 < <>  <
<<>  <
<<>  <
<<><4616 W Howard Ln Ste 1-150
<<>   mailto:t...@flexradio.com> <> http://www.flexradio.com> <> < <>  < <>   Ray,
<<> <>
<<> <> Glad they picked up another excellent bit of software!
<<> <>
<<> <> As usual, I have managed to break it.  After updating <> < <> complete success, I went   <>
a  < <>
<<> <> Error setting 'SourceFile' value!
<<> <> Error setting value:  Object reference not set to an <> < <>
<<> <> This is followed by a second box:
<<> <>
<<> <> The database is not a complete database.
<<> <> Select a different database of open PowerSDR and   <> PowerSDR properly after you have
 <>
<<> <> I have opened and closed PowerSDR, and rebooted with no <<>  <> but I wanted to report this.
 <>
<<> <> 73s,
<<> <>
<<> <> Alan
<<> <> WA4SCA
<<> <>
<<> <>
<<> <>
<<> <> <-Original Message-
<<> <> mailto:flexradio-boun...@flex-radio.biz] On <> <> < <>  <>
< <<>  <> < <> <> <  <>
< <>  <>  <>
< <>  <> <
<<> <>  <>
< <> 
< <> 
< <>  <> <
<<> <>  <>
< <>  <> <
<<> <>  <>
< <>  <> <
<<> <> <73, Ray, K9DUR
<<> <>  > <> <
<<> <> <
<<> <> <
<<> <> <___
<<> <>  <> mailto:FlexRadio@flex-radio.biz%0b%3c> > <>
<< <> http://www.mail-archive.com/flexradio%40flex-radio.biz/
<<> <> http://kc.flexradio.com/  Homepage:
<<> <>  > <> < <<> <> <<> <> <<> <>
___
<<> <> FlexRadio Systems Mailing List
<<> <> FlexRadio@flex-radio.biz
<<> <>
< <> Archives: 
 <> Knowledge Base: http://kc.flexradio.com/  Homepage:
<<>  > < <<>
<___
<<>  mailto:FlexRadio@flex-radio.biz%0b%3c> >
< http://www.mail-archive.com/flexradio%40flex-radio.biz/
<<> http://kc.flexradio.com/  Homepage:
<<>  > < <<> <<
<<___

Re: [Flexradio] SDRDataTransfer No Longer Available

[Alan]

Hi Dave,

Since I was able to do a transfer, once, I am going to sit this one out and 
play with the new 2.7.2. I
didn't see anything for satellite operators in the official list, but maybe I 
will find something. I
figure the guys in Austin and Terre Haute will have a proper fix worked out 
soon, and may even need
somebody to test it on.  :)

73s,

Alan
WA4SCA 


<-Original Message-
mailto:d...@w0dhb.net] 
mailto:wa4...@gmail.com] 
mailto:w5...@w5rkn.com> 
mailto:d...@w0dhb.net> , 
mailto:flexradio-boun...@flex-radio.biz] On 
mailto:flexradio-boun...@flex-radio.biz] On 
mailto:flexradio-boun...@flex-radio.biz] On 

 <  Tim,
<<>
<<> Standard.  2.6.4 >> 2.72 That worked the first time, never more.
<<>
<<> I also have 2.4.4, 2.5.3 and selected them, with the same 
<
<<> I tried all 3 using Expect mode, same message.
<<>
<<> 73s,
<<>
<<> Alan
<<> WA4SCA
<<>
<<>
<<>
<<>
<<> <-Original Message-
<<> mailto:flexradio-boun...@flex-radio.biz] 
 < <>  <
<<>  <
<<>  <
<<><4616 W Howard Ln Ste 1-150
<<>   mailto:t...@flexradio.com> <> http://www.flexradio.com> <> < <>  
< <>   Ray,
<<> <>
<<> <> Glad they picked up another excellent bit of software!
<<> <>
<<> <> As usual, I have managed to break it.  After updating <> 
< <> complete success, I went 
  <> a
 
< <>
<<> <> Error setting 'SourceFile' value!
<<> <> Error setting value:  Object reference not set to an <> 
< <>
<<> <> This is followed by a second box:
<<> <>
<<> <> The database is not a complete database.
<<> <> Select a different database of open PowerSDR and 
  <> PowerSDR properly after you have
 <>
<<> <> I have opened and closed PowerSDR, and rebooted with no 
<<>  <> but I wanted to report this.
 <>
<<> <> 73s,
<<> <>
<<> <> Alan
<<> <> WA4SCA
<<> <>
<<> <>
<<> <>
<<> <> <-Original Message-
<<> <> mailto:flexradio-boun...@flex-radio.biz] On <> <>
< <>  <>
< 
<<>  <> < <> <> 
<  <>
< <>  <>  <>
< <>  <> <
<<> <>  <>
< <> 
< <>  
< <>  <> <
<<> <>  <>
< <>  <> <
<<> <>  <>
< <>  <> <
<<> <> <73, Ray, K9DUR
<<> <>  > <> <
<<> <> <
<<> <> <
<<> <> <___
<<> <>  <> mailto:FlexRadio@flex-radio.biz%0b%3c> > <>
<< <> http://www.mail-archive.com/flexradio%40flex-radio.biz/
<<> <> http://kc.flexradio.com/  Homepage:
<<> <>  > <> <
<<> <>
<<> <>
<<> <> ___
<<> <> FlexRadio Systems Mailing List
<<> <> FlexRadio@flex-radio.biz
<<> <>
< <> Archives: 
 <> Knowledge Base: http://kc.flexradio.com/  Homepage:
<<>  > <
<<> <___
<<>  mailto:FlexRadio@flex-radio.biz%0b%3c> > 
< http://www.mail-archive.com/flexradio%40flex-radio.biz/
<<> http://kc.flexradio.com/  Homepage:
<<>  > <
<<>
<<
<<___

Re: [Flexradio] ANF stuttering?

[Tim Ellison]

What is your sampling rate and DSP buffer sizes?  If you are using a high 
sampling rate and large DSP buffer, try a lower sampling rate and/or smaller RX 
DSP buffer size and see if it makes a difference.

-Tim
---
Tim Ellison, W4TME
Customer Experience Manager
FlexRadio Systems
(Sent from my iPad)

> On Dec 17, 2013, at 7:04 AM, Jim McLester  wrote:
> 
> I have noticed this same effect in previous releases but it is
> significantly worse in the latest.
> 
> Jim
> W4YXU
> 
> 
>> On Tue, Dec 17, 2013 at 5:43 AM, J. Reed  wrote:
>> 
>> Hello, after changing my SDR version to the latest, I've noticed that my
>> Automatic Notch Filter is just
>> stuttering rather than notching on my Flex 5000.
>> 
>> Jim Reed,  W3RYJ...
>> 
>> ___
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
> 
> 
> 
> -- 
> Jim
> W4YXU
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] ANF stuttering?

[Jim McLester]

I have noticed this same effect in previous releases but it is
significantly worse in the latest.

Jim
W4YXU


On Tue, Dec 17, 2013 at 5:43 AM, J. Reed  wrote:

> Hello, after changing my SDR version to the latest, I've noticed that my
> Automatic Notch Filter is just
> stuttering rather than notching on my Flex 5000.
>
> Jim Reed,  W3RYJ...
>
> ___
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>



-- 
Jim
W4YXU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] ANF stuttering?

[J. Reed]

Hello, after changing my SDR version to the latest, I've noticed that my 
Automatic Notch Filter is just 
stuttering rather than notching on my Flex 5000. 

Jim Reed,  W3RYJ... 

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] SDRDataTransfer No Longer Available

[on4amg]

I uninstalled the PSDRDT utility and ran the entire PowerSDR 2.7.2 setup again.
Made sure to update the PSDRDT utility first and then exited the program and 
ran it again, everything worked fine this time around.
All settings seem to have been carried over (although the log shows some error 
entries in the bandstack part).

HOWEVER this only worked once (as reported by others), running the PSDRDT 
utility a second time, all previously checked fields were unchecked (blank) 
again, producing the errors already reported.  

PowerSDR 2.7.2 itself is fully functional however I have not been able to do 
any testing yet.

73's Guy
on4amg 

- Oorspronkelijk bericht -
Van: "Ronald G. Parsons" 
Aan: wa4...@gmail.com, "David W0DHB" , "tm stuff" 
, t...@flexradio.com, flexradio@flex-radio.biz
Verzonden: Dinsdag 17 december 2013 03:35:05
Onderwerp: Re: [Flexradio] SDRDataTransfer No Longer Available

I followed Dave’s lead and did the uninstalls and installs. Then ran PSDRDT 
going directly from 2.6.4 to 2.7.2. During the beta, I had transferred 2.6.4 to 
2.7.0 to 2.7.1 to 2.7.2.

This time all went well EXCEPT the EQ on the Flex 1500 on the new 2.7.2 was 
flat. I would swear that the EQ on the 1500 on 2.6.4 was not flat as I had just 
created the new transmit profiles on both the 1500 and 3000 and they all were 
not flat. I could be wrong, but I don’t think so. The transferred EQ on the 
3000 was not flat.

And again, as I had reported before, on the 1500, when I first changed the 
transmit profile, the MIC gain was incorrect. This corrected itself and a later 
load of the transmit profile.  

No error messages appeared.

Ron W5RKN

From: wa4...@gmail.com 
Sent: Monday, December 16, 2013 8:12 PM
To: Ronald G. Parsons ; 'David W0DHB' ; tm.st...@verizon.net ; 
t...@flexradio.com ; flexradio@flex-radio.biz 
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

I am not a beta tester though I had Ray’s old program installed.  I have 
removed it after the upgrade, which did not retroactively solve the problem.

73s,
WA4SCA



From: Ronald G. Parsons
Sent: ‎Monday‎, ‎December‎ ‎16‎, ‎2013 ‎7‎:‎38‎ ‎PM
To: 'David W0DHB', tm.st...@verizon.net, t...@flexradio.com, 
flexradio@flex-radio.biz

I just checked mine and noticed the same thing -- three instances of PSDRDT 
and three instances of PSDR corresponding to the beta installs and 2.7.2. 
The date on the .exe file for PSDRDT was 12/12 which did not correspond to 
any of the beta install dates but was probably Ray's last compile.

I think Ray should check to see if a prior instance of PSDRDT exists when a 
new one is installed and remove the old one (or at least ask the person 
installing).

However this arrangement did not cause me an error as far as I know, but I 
think I'll follow Dave's lead and uninstall and reinstall just to make sure.

Ron W5RKN

-Original Message- 
From: David W0DHB
Sent: Monday, December 16, 2013 7:06 PM
To: tm.st...@verizon.net ; t...@flexradio.com ; flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Couple of observations

I ran PowerSDR-Datatransfer on a second database and got the errors as
described by Alan originally

Went to uninstall PSDRDT and found I had three instances in the programs and
features menu (probably from installing beta releases leading up to 2.7.2)
Uninstalled all 3
Uninstalled PSDR 2.7.2
Uninstalled SDRDataTransfer (Ray's version)
Rebooted
Reinstalled PSD 2.7.2
Did the conversion from 2.6.4 to 2.7.2 (worked fine)
Tried another conversion during the same session , worked now
Closed PSDR DT
Reopen PSDR DT and conversions worked.
Rebooted and was still able to do conversions, no sign of original error

-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TM
Sent: Monday, December 16, 2013 4:30 PM
To: t...@flexradio.com; flexradio@flex-radio.biz
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Gents:

I am getting the same errors as reported by others.  Did the "update setup
data" prior to trying the first time to do the transfer.  That worked the
first time, but on second try got the " PROCEEDURE: UpdateSetupData ERROR:
Converting from string "" to type 'Date is not valid." Error as well.

Tried both standard and expert modes.

Sure hoping for some ideas/fixes.

That said, this looks like a nice PSDR upgrade.  Glad Flex is still working
on keeping this product line up to date.

Standing by here.  :)

73, Tom
K1FR




-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: Monday, December 16, 2013 4:26 PM
To: t...@flexradio.com; apbid...@mailaps.org; flexradio@flex-radio.biz
Cc: 'CC'
Subject: Re: [Flexradio] SDRDataTransfer No Longer Available

Tim,

Guy sent you the program update error.  Here is the setupdata error.  I
trust you will forward it to Ray.  :)

73s,

Alan
WA4SCA


<-Original Message-
mailto:flexradio-boun...@flex-radio.biz] On mailto:t...