[Flexradio] EDIROL FA-66 microphone input problem ?
Hello, I finally tried hooking a microphone up to my new EDIROL FA-66 soundcard. I followed the suggestions in the quick start guide in the KB. I connected a mic with a 1/8 mono plug to a 1/4 in TS adapter plug and put it into input #1 on the FA-66 but got no output. I next tried recording an audio signal from the mic to Audacity but could get nothing through the EDIROL. I can get an audio signal from the mic to the laptop soundcard and then to Audacity. I also tried the mic on my Heil headset but still no luck through the EDIROL. Do I need to use a balanced XLR audio plug?Any ideas? Thanks, Everett, KG6RYB ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
[Flexradio] Configuration for VAC for running WSJT from a SDR-1000/FA-66
Hello, I am trying to use VAC to connect WSJT to my SDR-1000/FA-66. I set it up according to the article in the knowledge base. The audio signal that gets to the WSJT program is a series of bursts of audio. This problem is mentioned in the KB article but the fixes mentioned there did not work for my configuration. I have been successful in getting MixW to work with my SDR-1000/FA-66 and the VAC. My computer is a Dell Inspiron 600M ~1.6GHz. I am using the demo version of VAC. Any suggestions on what parameters to us to set up the VAC would be appreciated. Thanks, Everett, KG6RYB ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
[Flexradio] Recommended firewire cards for laptops ?
Hello, I just ordering a FA-66 for my SDR-1000. My computer is a Dell laptop Inspiron 600m without a firewire port. Is there a list of recommended firewire cards for laptop computers? On the knowledge base I only see cards for desktops. I notice there are both "400" (1394a) and "800" (1394b) firewire cards. Does this matter? Thanks, Everett Palmer, KG6RYB ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
Re: [Flexradio] problem trying to install VAC ... solved
At 01:47 PM 8/30/2006, Richard Smith wrote: >I had the same problem, but I know the cure. I would guess that you are >trying to install the program from the view of the ZIP folder in windows. >That is not the same as extracting the files from the .ZIP file, and using >the extracted files for the install. The installer has a bug, and running >Setup from the ZIP folder view won't work without extracting the files. You >need to extract all the files from the .ZIP file into a separate new folder. >Then run the setup program from that new folder. Good luck. > >Rich >- Original Message - From: "Everett Palmer" <[EMAIL PROTECTED]> >To: >Sent: Tuesday, August 29, 2006 10:41 PM >Subject: [Flexradio] problem trying to install VAC > > >>Hello, >> >>I get the following error message when I try to install the VAC >>software (4.03). The file vrtaucbl.sys is in C:\Program files\i386. >> >>Any ideas, >>Thanks, >> >>Everett, KG6RYB >> >>29.08.06*19:35:15**MessageBox: Cannot copy "i386\vrtaucbl.sys" to >>"C:\WINDOWS\System32\Drivers\vrtaucbl.sys" (0/3 - The system cannot >>find the path specified.) >> >> >> >> >> >> >>___ >>FlexRadio mailing list >>FlexRadio@flex-radio.biz >>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] problem trying to install VAC
Richard, Thanks - I redownloaded the vac-4.02.zip file and extracted the contents and it worked fine. I think what I did before was open the zip file from the web browser download window. Thanks for the tip, Everett, KG6RYB At 01:47 PM 8/30/2006, Richard Smith wrote: >I had the same problem, but I know the cure. I would guess that you are >trying to install the program from the view of the ZIP folder in windows. >That is not the same as extracting the files from the .ZIP file, and using >the extracted files for the install. The installer has a bug, and running >Setup from the ZIP folder view won't work without extracting the files. You >need to extract all the files from the .ZIP file into a separate new folder. >Then run the setup program from that new folder. Good luck. > >Rich >- Original Message - From: "Everett Palmer" <[EMAIL PROTECTED]> >To: >Sent: Tuesday, August 29, 2006 10:41 PM >Subject: [Flexradio] problem trying to install VAC > > >>Hello, >> >>I get the following error message when I try to install the VAC >>software (4.03). The file vrtaucbl.sys is in C:\Program files\i386. >> >>Any ideas, >>Thanks, >> >>Everett, KG6RYB >> >>29.08.06*19:35:15**MessageBox: Cannot copy "i386\vrtaucbl.sys" to >>"C:\WINDOWS\System32\Drivers\vrtaucbl.sys" (0/3 - The system cannot >>find the path specified.) >> >> >> >> >> >> >>___ >>FlexRadio mailing list >>FlexRadio@flex-radio.biz >>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] problem trying to install VAC
Hello, I get the following error message when I try to install the VAC software (4.03). The file vrtaucbl.sys is in C:\Program files\i386. Any ideas, Thanks, Everett, KG6RYB 29.08.06*19:35:15**MessageBox: Cannot copy "i386\vrtaucbl.sys" to "C:\WINDOWS\System32\Drivers\vrtaucbl.sys" (0/3 - The system cannot find the path specified.) ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] vSound Development Fund - Goal Update ... N+1
Hello, I just sent in $30.00. Everett, KG6RYB ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Linux - DttSP question: Commands to listen to AM radio?
Bob, I switched to pyhw. I do hear something that sounds like cycling. I played a wav file (ssb.wav from flex-radio) with xmms feeding qjackctl and then jsdr. (On jack I connected alsa-pcm --> sdr- & sdr- --> alsa-pcm.) I then started my sdr-1000 and shut down xmms. I also started python and cmdr. On pyhw I executed. execfile("sdr1k-setup.py") (with setDDSFreq(0.810) On cmdr I executed. setRXOn 0 setSampleRate 48000 (I am using a SB MP3+ USB soundcard) setOsc 0 setFilter -3000 3000 setMode AM I didn't hear anything interesting - just something that could be described as cycling at about 1 Hz. Seems like I should have to do something with the qjackctl patch panel to connect up to the sdr-1000. When I used it with the sdr-1000 it was set up the same as I had it with xmms. I know I should just wait for the new code but this seems s close to working. Thanks, Everett, KG6RYB At 04:46 AM 5/29/2006, Robert McGwier wrote: >Everett: > >Do you hear a noise at the output (speakers) that sounds like it is cycling? > >I used pyhw rather than pyhw2. > >We are well on our way to replace all of that with code that will talk to >all aspects of the radio including amplifier, ATU, and transverter. > >Bob >N4HY > > >Everett Palmer wrote: >>Hi Ken, >> >>I am basing the fact that it is possible to drive the SDR-1000 hardware >>from Linux on this post from Bob McGwier back in January. >> >>"The Mini-ITX, running SUSE 9.3 carries Don Imus 660 AM every morning >>using SDR-1000 number 2 running jsdr, jack." >> >>I am trying to use the code in the pyhw2 directory to control the >>SDR-1000 hardware over the parallel port. I can issue commands and hear >>the relays click in the SDR-1000 but I have not been successful yet in >>receiving an AM radio station. There is also another command line >>interface- cmdr - in the DttSP package but I think that this interface >>controls just the software - not the hardware. >> >>One problem was that ubuntu on my system does not have >>/dev/parport0. With some help from Bill on teamspeak and my linux guy >>at work I learned that you can create the port with either: >> >>sudo modeprobe ppdev >> >>or >> >>sudo mknod /dev/parport0 c 99 0 >> >>I also did a >> >>sudo chown epalmer:epalmer parport0 >> >>so I could drive the parallel port from my user account. >> >>73, >>Everett, KG6RYB >> >> > > >-- >AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, >NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman >Laziness is the number one inspiration for ingenuity. Guilty as charged! ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Linux - DttSP question: Commands to listen to AM radio?
Hi Ken, I am basing the fact that it is possible to drive the SDR-1000 hardware from Linux on this post from Bob McGwier back in January. "The Mini-ITX, running SUSE 9.3 carries Don Imus 660 AM every morning using SDR-1000 number 2 running jsdr, jack." I am trying to use the code in the pyhw2 directory to control the SDR-1000 hardware over the parallel port. I can issue commands and hear the relays click in the SDR-1000 but I have not been successful yet in receiving an AM radio station. There is also another command line interface- cmdr - in the DttSP package but I think that this interface controls just the software - not the hardware. One problem was that ubuntu on my system does not have /dev/parport0. With some help from Bill on teamspeak and my linux guy at work I learned that you can create the port with either: sudo modeprobe ppdev or sudo mknod /dev/parport0 c 99 0 I also did a sudo chown epalmer:epalmer parport0 so I could drive the parallel port from my user account. 73, Everett, KG6RYB At 10:22 PM 5/28/2006, you wrote: >How in the world are you controlling the parallel interface? >as far as I know, there aren't any SDR-1000s running on Linux. >BK de Ken > > >Everett Palmer wrote: >>I am trying to operate my SDR-1000 from Ubuntu Linux with the command >>line interface. >>Could some one tell me the commands listening to an AM radio station? >>Also do I need to use both the cmdr shell script and the pyhw2 python script? >>Thanks, >>Everett, KG6RYB >> >>___ >>FlexRadio mailing list >>FlexRadio@flex-radio.biz >>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ >>FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] Linux - DttSP question: Commands to listen to AM radio?
I am trying to operate my SDR-1000 from Ubuntu Linux with the command line interface. Could some one tell me the commands listening to an AM radio station? Also do I need to use both the cmdr shell script and the pyhw2 python script? Thanks, Everett, KG6RYB ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] 16 versus 24 bit audio ... how do you make these measurements?
Hello Peter, What software and/or hardware do you use to measure soundcards? Thanks, Everett, KG6RYB At 01:06 PM 5/19/2006, Peter Martinez wrote: > >From G3PLX: > >I am just starting to do some serious tests with my new 24-bit Firebox. With >the audio input of a channel short-circuit, if I analyse the statistics of >the 24-bit data, I find the bottom 8 bits are ALWAYS random. In fact the >bottom 9-10 bits are random. > >This tells me there is no point at all in having 24-bit audio. I might just >as well stay with 16-bits. > >Has anyone here done any rigorous tests comparing 16 and 24-bit audio and >found any difference? Like patching the code to mask off the bottom 8 bits >completely, or replacing the bottom 8 bits with random data. Maybe someone >has added a checkbox to turn this sort of test feature on and off and see >what, if any, is the difference in the speaker. > >73 >Peter > > >___ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ >FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Laptops with FlexRadio ... Dell Inspiron 600M
Hello, I am using a Dell Inspiron 600m laptop with my SDR-1000. I bought it because it has both parallel and serial ports. It seems to work fine. Everett, KG6RYB At 07:55 PM 3/2/2006, [EMAIL PROTECTED] wrote: Is anyone using a laptop with Flex-Radio? While I remain a perspective purchaser of an SDR-1000, when I get one I am considering using a laptop with a Firewire card to drive a FireBox 6x10. Has anyone tried this setup? Thanks. 73, Fred Bray W6WAW ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com