Re: [Flexradio] PowerSDR 1.14.0 question
Thanks Eric, Yes, that would be a very good widget. I know your working a big list but this is the only issue I have with 1.14.0, very nice package... Ciao, Dennis, k0eoo Eric Wachsmann [EMAIL PROTECTED] wrote: The scope is currently being processed from the post-processed audio (after the filter, AGC, etc). So it is indeed going to be scaled by any modifiers to the DSP. There is currently no separate scaling control, but this might be a good chance to enter a Feature Request for just such a widget. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Petrich Sent: Saturday, September 06, 2008 12:36 PM To: Flex-Radio E-Mail Reflector Subject: [Flexradio] PowerSDR 1.14.0 question Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] PowerSDR 1.14.0 question
The scope is currently being processed from the post-processed audio (after the filter, AGC, etc). So it is indeed going to be scaled by any modifiers to the DSP. There is currently no separate scaling control, but this might be a good chance to enter a Feature Request for just such a widget. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Petrich Sent: Saturday, September 06, 2008 12:36 PM To: Flex-Radio E-Mail Reflector Subject: [Flexradio] PowerSDR 1.14.0 question Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] PowerSDR 1.14.0 question
Oeps Dennis, I read pana.. and expected panafal, asume it was late I see no vertical controls for the scopemode Some for the wishlist? 73 peter groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/ https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/ petervn-at-hetnet-nl pa0pvn-at-hetnet-nl pa0pvn-at-amsat-org only large files:pa0pvn-at-gmail-com There are 10 kind of people, those who can count to 1010 on their fingers, and those who count to 11. Van: Dennis Petrich [mailto:[EMAIL PROTECTED] Verzonden: zo 7-9-2008 2:37 Aan: [EMAIL PROTECTED] Onderwerp: Re: [Flexradio] PowerSDR 1.14.0 question I don't undertand Peter. That is for the waterfall? My problem is the vertical gain of the SCOPE. But, I tried varing the low and high levels for the waterfall and they had no effect. Thanks anyway, or , do I still not understand? Ciao, Dennis Van: [EMAIL PROTECTED] Verzonden: za 6-9-2008 21:46 Aan: Dennis Petrich; Flex-Radio E-Mail Reflector Onderwerp: RE: [Flexradio] PowerSDR 1.14.0 question Setup - Display - - Spectrum Grid - Waterfall Set Low and High levels Hope that helps 73 peter pa0pvn groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/ https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/ petervn-at-hetnet-nl pa0pvn-at-hetnet-nl pa0pvn-at-amsat-org only large files:pa0pvn-at-gmail-com There are 10 kind of people, those who can count to 1010 on their fingers, and those who count to 11. Van: [EMAIL PROTECTED] namens Dennis Petrich Verzonden: za 6-9-2008 19:35 Aan: Flex-Radio E-Mail Reflector Onderwerp: [Flexradio] PowerSDR 1.14.0 question Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] PowerSDR 1.14.0 question
There are not any controls. What you see displayed is signal strength not audio gain. Turn down the AGC-T gain and turn up the AF gain to minimize the signal strength and to still be able to hear the signal -Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Sunday, September 07, 2008 4:35 AM To: Dennis Petrich; Flex-Radio E-Mail Reflector Subject: Re: [Flexradio] PowerSDR 1.14.0 question Oeps Dennis, I read pana.. and expected panafal, asume it was late I see no vertical controls for the scopemode Some for the wishlist? 73 peter groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/ https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/ petervn-at-hetnet-nl pa0pvn-at-hetnet-nl pa0pvn-at-amsat-org only large files:pa0pvn-at-gmail-com There are 10 kind of people, those who can count to 1010 on their fingers, and those who count to 11. Van: Dennis Petrich [mailto:[EMAIL PROTECTED] Verzonden: zo 7-9-2008 2:37 Aan: [EMAIL PROTECTED] Onderwerp: Re: [Flexradio] PowerSDR 1.14.0 question I don't undertand Peter. That is for the waterfall? My problem is the vertical gain of the SCOPE. But, I tried varing the low and high levels for the waterfall and they had no effect. Thanks anyway, or , do I still not understand? Ciao, Dennis Van: [EMAIL PROTECTED] Verzonden: za 6-9-2008 21:46 Aan: Dennis Petrich; Flex-Radio E-Mail Reflector Onderwerp: RE: [Flexradio] PowerSDR 1.14.0 question Setup - Display - - Spectrum Grid - Waterfall Set Low and High levels Hope that helps 73 peter pa0pvn groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/ https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/ petervn-at-hetnet-nl pa0pvn-at-hetnet-nl pa0pvn-at-amsat-org only large files:pa0pvn-at-gmail-com There are 10 kind of people, those who can count to 1010 on their fingers, and those who count to 11. Van: [EMAIL PROTECTED] namens Dennis Petrich Verzonden: za 6-9-2008 19:35 Aan: Flex-Radio E-Mail Reflector Onderwerp: [Flexradio] PowerSDR 1.14.0 question Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] PowerSDR 1.14.0 question
Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] PowerSDR 1.14.0 question
Setup - Display - - Spectrum Grid - Waterfall Set Low and High levels Hope that helps 73 peter pa0pvn groeten Peter websitehttp://www.homepages.hetnet.nl/~petervn/ https://netmail.hetnet.nl/exchweb/bin/redir.asp?URL=http://www.homepages.hetnet.nl/~petervn/ petervn-at-hetnet-nl pa0pvn-at-hetnet-nl pa0pvn-at-amsat-org only large files:pa0pvn-at-gmail-com There are 10 kind of people, those who can count to 1010 on their fingers, and those who count to 11. Van: [EMAIL PROTECTED] namens Dennis Petrich Verzonden: za 6-9-2008 19:35 Aan: Flex-Radio E-Mail Reflector Onderwerp: [Flexradio] PowerSDR 1.14.0 question Hello guys, I just love the new scope and Panascope feature!!! The display looks just like a monitor scope My question is, how can I turn the scope vertical gain down without effecting the receivers gain??? The vertical gain is so much it goes off the screen or in Panascope mode it covers up the panadapter display. The AGC-T control will lower the scope gain but it cuts the receiver gain too much. So what am I missing?? Thanks in advance for any help. Dennis, k0eoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/