[Flexradio] PowerSDR 2.3.5 and SDR-1000 Parallel Port Problems

[Larry Robison]

First let me say that I am amazed at how well the PowerSDR software 
still supports the good old SDR-1000! Over the weekend I brought my 1000 
out of the closet and installed PowerSDR on a fresh load of XP Pro. 
Everything was loaded, along with DOT NET extensions, and all updates 
done. The first run of PowerSDR would not find the parallel port and 
thus no relay click and nothing worked. I spent Saturday trying 
everything known to man, measuring PP voltages, connecting a printer, 
checking a known good cable with a Fluke a hundred times and everything 
was fine except the SDR-1000 would not work! Finally I loaded a second 
computer with a new load of XP Pro and repeated everything that I had on 
the first computer. It didn't work either! Finally, I loaded PowerSDR 
1.18 and it worked fine and when I went back to 2.3.5, it worked! I 
moved all of the cables back to the original computer loaded 1.18 and 
that fixed it also.


I checked all known sources for 2.3.5 anomalies for the SDR-1000 install 
and nothing mentions a problem like this. Oh, I did this all again on a 
third computer and it worked the same.


It's amazing. Looking at the screen, you would not know (with some small 
exceptions) that you had an SDR-1000 tied to the other end instead of an 
SDR-5000. Absolutely amazing!  --LarryW8ER

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Rick Lehman]

Thanks Mike.  I reviewed the link prior to changing my settings.  As I 
recall you have to have VAC 4.11 installed before you can change the windows 
setting to 192 kHz.  I back it down last night.  We shall see if it stays 
fixed.  Thanks again for the information.


Rick- WB4EJC

-Original Message- 
From: Michael Walker

Sent: Tuesday, March 20, 2012 10:56 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3VAC V4.11

Hi Rick

I'm not sure how you change the sample rate for Line 1 of VAC for example
to 192khz.  I just checked mine and the highest it goes is 48k.

What happens if you run at 48khz and ensure that it is all the default
setting for Line 1 and Line 2 of both the playback and recording channels.

Have a look at the link I sent.

Mike va3mw


On Tue, Mar 20, 2012 at 10:50 PM, Rick Lehman  wrote:


Yes as far as I know.  Window 7 VAC cables and PSDR set to 192 kHz.  No
setting in JT65.  What else is there?

-Original Message- From: Michael Walker
Sent: Tuesday, March 20, 2012 10:20 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3VAC V4.11


Just a thought, but have you configured your default sampling rates all 
the

way through the audio chain make sure the default is the same?

Have a look at 
http://kc.flexradio.com/**KnowledgebaseArticle50504.aspx<http://kc.flexradio.com/KnowledgebaseArticle50504.aspx>


I got bit with this when WSPR would not decode at all.

Mike va3mw


On Tue, Mar 20, 2012 at 9:13 PM, Jim - W4YXU  wrote:

 Same here.  Visible only, no decode effects noted yet.


Jim
W4YXU


On 3/20/2012 7:38 PM, Rick Lehman wrote:

 Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used

JT65 V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC
C4.11
and again using JT65,  I have observed that as the waterfall scrolls 
down

during receive there will be dark band window shading effect on
waterfall.
 No received signal can be seen in the dark bands.  Decoding seems
unaffected as far as I can tell, but I am concerned there may be audio
processing gaps which are overcome by the robustness of the protocol.
 Sometimes the banding is there other times it is not.  Window 7 VAC
cables
are at 192 kHz.  VAC setting within PDSR is set at 192 Khz.There is
not
an adjustment in JT65 that I am aware of other than automatic sample 
rate

correction.  I have a fast computer with loading between 5-20%.   Does
anyone have any suggestions?  Thanks.

73

WB4EJC- Rick
Coconut Creek, Fl (near Ft Lauderdale)
___

FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_
flex-radio.biz<http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz>
<http://mail.**flex-radio.biz/mailman/**listinfo/flexradio_flex-radio.**
biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
>
Archives: 
http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/**flexradio%40flex-radio.biz/>

http://www.mail-archive.com/flexradio%40flex-radio.biz/>
>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/



___

FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_
flex-radio.biz<http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz>
<http://mail.**flex-radio.biz/mailman/**listinfo/flexradio_flex-radio.**
biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
>
Archives: 
http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/**flexradio%40flex-radio.biz/>

http://www.mail-archive.com/flexradio%40flex-radio.biz/>
>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/

 __**_

FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archives: 
http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Arc

Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Michael Walker]

Hi Rick

I'm not sure how you change the sample rate for Line 1 of VAC for example
to 192khz.  I just checked mine and the highest it goes is 48k.

What happens if you run at 48khz and ensure that it is all the default
setting for Line 1 and Line 2 of both the playback and recording channels.

Have a look at the link I sent.

Mike va3mw


On Tue, Mar 20, 2012 at 10:50 PM, Rick Lehman  wrote:

> Yes as far as I know.  Window 7 VAC cables and PSDR set to 192 kHz.  No
> setting in JT65.  What else is there?
>
> -Original Message- From: Michael Walker
> Sent: Tuesday, March 20, 2012 10:20 PM
> To: flexradio@flex-radio.biz
> Subject: Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3VAC V4.11
>
>
> Just a thought, but have you configured your default sampling rates all the
> way through the audio chain make sure the default is the same?
>
> Have a look at  
> http://kc.flexradio.com/**KnowledgebaseArticle50504.aspx<http://kc.flexradio.com/KnowledgebaseArticle50504.aspx>
>
> I got bit with this when WSPR would not decode at all.
>
> Mike va3mw
>
>
> On Tue, Mar 20, 2012 at 9:13 PM, Jim - W4YXU  wrote:
>
>  Same here.  Visible only, no decode effects noted yet.
>>
>> Jim
>> W4YXU
>>
>>
>> On 3/20/2012 7:38 PM, Rick Lehman wrote:
>>
>>  Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used
>>> JT65 V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC
>>> C4.11
>>> and again using JT65,  I have observed that as the waterfall scrolls down
>>> during receive there will be dark band window shading effect on
>>> waterfall.
>>>  No received signal can be seen in the dark bands.  Decoding seems
>>> unaffected as far as I can tell, but I am concerned there may be audio
>>> processing gaps which are overcome by the robustness of the protocol.
>>>  Sometimes the banding is there other times it is not.  Window 7 VAC
>>> cables
>>> are at 192 kHz.  VAC setting within PDSR is set at 192 Khz.There is
>>> not
>>> an adjustment in JT65 that I am aware of other than automatic sample rate
>>> correction.  I have a fast computer with loading between 5-20%.   Does
>>> anyone have any suggestions?  Thanks.
>>>
>>> 73
>>>
>>> WB4EJC- Rick
>>> Coconut Creek, Fl (near Ft Lauderdale)
>>> ___
>>>
>>> FlexRadio Systems Mailing List
>>> FlexRadio@flex-radio.biz
>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_
>>> flex-radio.biz<http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz>
>>> <http://mail.**flex-radio.biz/mailman/**listinfo/flexradio_flex-radio.**
>>> biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
>>> >
>>> Archives: 
>>> http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/**flexradio%40flex-radio.biz/>
>>> http://www.mail-archive.com/flexradio%40flex-radio.biz/>
>>> >
>>>
>>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>>> http://www.flexradio.com/
>>>
>>>
>> ___
>>
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_
>> flex-radio.biz<http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz>
>> <http://mail.**flex-radio.biz/mailman/**listinfo/flexradio_flex-radio.**
>> biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
>> >
>> Archives: 
>> http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/**flexradio%40flex-radio.biz/>
>> http://www.mail-archive.com/flexradio%40flex-radio.biz/>
>> >
>>
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>>  __**_
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
> Archives: 
> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Rick Lehman]

Yes as far as I know.  Window 7 VAC cables and PSDR set to 192 kHz.  No 
setting in JT65.  What else is there?


-Original Message- 
From: Michael Walker

Sent: Tuesday, March 20, 2012 10:20 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3VAC V4.11

Just a thought, but have you configured your default sampling rates all the
way through the audio chain make sure the default is the same?

Have a look at  http://kc.flexradio.com/KnowledgebaseArticle50504.aspx

I got bit with this when WSPR would not decode at all.

Mike va3mw


On Tue, Mar 20, 2012 at 9:13 PM, Jim - W4YXU  wrote:


Same here.  Visible only, no decode effects noted yet.

Jim
W4YXU


On 3/20/2012 7:38 PM, Rick Lehman wrote:


Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used
JT65 V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC 
C4.11

and again using JT65,  I have observed that as the waterfall scrolls down
during receive there will be dark band window shading effect on 
waterfall.

 No received signal can be seen in the dark bands.  Decoding seems
unaffected as far as I can tell, but I am concerned there may be audio
processing gaps which are overcome by the robustness of the protocol.
 Sometimes the banding is there other times it is not.  Window 7 VAC 
cables
are at 192 kHz.  VAC setting within PDSR is set at 192 Khz.There is 
not

an adjustment in JT65 that I am aware of other than automatic sample rate
correction.  I have a fast computer with loading between 5-20%.   Does
anyone have any suggestions?  Thanks.

73

WB4EJC- Rick
Coconut Creek, Fl (near Ft Lauderdale)
__**_
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archives: 
http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/



__**_
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archives: 
http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Michael Walker]

Just a thought, but have you configured your default sampling rates all the
way through the audio chain make sure the default is the same?

Have a look at  http://kc.flexradio.com/KnowledgebaseArticle50504.aspx

I got bit with this when WSPR would not decode at all.

Mike va3mw


On Tue, Mar 20, 2012 at 9:13 PM, Jim - W4YXU  wrote:

> Same here.  Visible only, no decode effects noted yet.
>
> Jim
> W4YXU
>
>
> On 3/20/2012 7:38 PM, Rick Lehman wrote:
>
>> Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used
>> JT65 V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC C4.11
>> and again using JT65,  I have observed that as the waterfall scrolls down
>> during receive there will be dark band window shading effect on waterfall.
>>  No received signal can be seen in the dark bands.  Decoding seems
>> unaffected as far as I can tell, but I am concerned there may be audio
>> processing gaps which are overcome by the robustness of the protocol.
>>  Sometimes the banding is there other times it is not.  Window 7 VAC cables
>> are at 192 kHz.  VAC setting within PDSR is set at 192 Khz.There is not
>> an adjustment in JT65 that I am aware of other than automatic sample rate
>> correction.  I have a fast computer with loading between 5-20%.   Does
>> anyone have any suggestions?  Thanks.
>>
>> 73
>>
>> WB4EJC- Rick
>> Coconut Creek, Fl (near Ft Lauderdale)
>> __**_
>> FlexRadio Systems Mailing List
>> FlexRadio@flex-radio.biz
>> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz
>> Archives: 
>> http://www.mail-archive.com/**flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>
> __**_
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz
> Archives: 
> http://www.mail-archive.com/**flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Jim - W4YXU]

Same here.  Visible only, no decode effects noted yet.

Jim
W4YXU

On 3/20/2012 7:38 PM, Rick Lehman wrote:

Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used JT65 
V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC C4.11 and 
again using JT65,  I have observed that as the waterfall scrolls down during 
receive there will be dark band window shading effect on waterfall.  No 
received signal can be seen in the dark bands.  Decoding seems unaffected as 
far as I can tell, but I am concerned there may be audio processing gaps which 
are overcome by the robustness of the protocol.  Sometimes the banding is there 
other times it is not.  Window 7 VAC cables are at 192 kHz.  VAC setting within 
PDSR is set at 192 Khz.There is not an adjustment in JT65 that I am aware 
of other than automatic sample rate correction.  I have a fast computer with 
loading between 5-20%.   Does anyone have any suggestions?  Thanks.

73

WB4EJC- Rick
Coconut Creek, Fl (near Ft Lauderdale)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] POWERSDR 2.3.5--- JT65 V1.0.9.3----VAC V4.11

[Rick Lehman]

Using Flex 5000.   First installed PDSR 2.3.5 with no problems and used JT65 
V1.0.9.3 with no problems.  Upon switching from VAC V4.09 to VAC C4.11 and 
again using JT65,  I have observed that as the waterfall scrolls down during 
receive there will be dark band window shading effect on waterfall.  No 
received signal can be seen in the dark bands.  Decoding seems unaffected as 
far as I can tell, but I am concerned there may be audio processing gaps which 
are overcome by the robustness of the protocol.  Sometimes the banding is there 
other times it is not.  Window 7 VAC cables are at 192 kHz.  VAC setting within 
PDSR is set at 192 Khz.There is not an adjustment in JT65 that I am aware 
of other than automatic sample rate correction.  I have a fast computer with 
loading between 5-20%.   Does anyone have any suggestions?  Thanks.

73 

WB4EJC- Rick
Coconut Creek, Fl (near Ft Lauderdale)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

[Don]

Gary

Thanks I will give that a try.  I have always had my swr set for 1.2.

How about in 6M did it work ok?

Don, kd6hq

-Original Message- 
From: K8EHB Gary

Sent: Sunday, March 11, 2012 5:26 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

Hi All,

I did some more experimenting today and found that if I lowered the SWR
Target value from 1.5 (default) to 1.1 which gave the ATU something to
improve on 10m & 12m it works fine now. I also found that you need to go to
each band and press the ATU button so the ATU database has some "default"
values for each band.

73,
...Gary


On Sun, Mar 11, 2012 at 8:11 PM, Ronald G. Parsons  wrote:


It seems to make it work the way you wish is to check both [Auto Mode] and
[Force Retune].

Ron W5RKN


-Original Message- From: K8EHB Gary
Sent: Saturday, March 10, 2012 2:29 PM

To: FlexRadio@flex-radio.biz
Subject: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

Hi All,

I had my first chance to play radio today since upgrading to the new
release. I noticed on the F3K ATU form a box labeled [Auto Mode]. So I
checked the box and pressed the ATU button to get things going. I made a
couple of band changes and heard some clicking in the radio each time and
thought cool. My F3K ATU now works like the ATU in a "legacy" radio. This
function seems to work on all bands for me except 12m. Every time I select
12m the ATU goes into bypass which I wasn't surprised since my loop is 
flat

on 12m. But when I changed to a band with a know higher SWR it stays in
bypass until I press the ATU button. Now I've not tried doing a database
reset, or transmitting to see if that causing it to perform a tune. I
thought would ask the question here first to see what others have
experienced. I also don't remember seeing anything about this in the
release notes.


73,
...Gary, K8EHB
__**_
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archives: 
http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>

Knowledge Base: http://kc.flexradio.com/  Homepage:
http://www.flexradio.com/


___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

[K8EHB Gary]

Hi All,

I did some more experimenting today and found that if I lowered the SWR
Target value from 1.5 (default) to 1.1 which gave the ATU something to
improve on 10m & 12m it works fine now. I also found that you need to go to
each band and press the ATU button so the ATU database has some "default"
values for each band.

73,
...Gary


On Sun, Mar 11, 2012 at 8:11 PM, Ronald G. Parsons  wrote:

> It seems to make it work the way you wish is to check both [Auto Mode] and
> [Force Retune].
>
> Ron W5RKN
>
>
> -Original Message- From: K8EHB Gary
> Sent: Saturday, March 10, 2012 2:29 PM
>
> To: FlexRadio@flex-radio.biz
> Subject: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form
>
> Hi All,
>
> I had my first chance to play radio today since upgrading to the new
> release. I noticed on the F3K ATU form a box labeled [Auto Mode]. So I
> checked the box and pressed the ATU button to get things going. I made a
> couple of band changes and heard some clicking in the radio each time and
> thought cool. My F3K ATU now works like the ATU in a "legacy" radio. This
> function seems to work on all bands for me except 12m. Every time I select
> 12m the ATU goes into bypass which I wasn't surprised since my loop is flat
> on 12m. But when I changed to a band with a know higher SWR it stays in
> bypass until I press the ATU button. Now I've not tried doing a database
> reset, or transmitting to see if that causing it to perform a tune. I
> thought would ask the question here first to see what others have
> experienced. I also don't remember seeing anything about this in the
> release notes.
>
>
> 73,
> ...Gary, K8EHB
> __**_
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
> Archives: 
> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Re: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

[Ronald G. Parsons]

It seems to make it work the way you wish is to check both [Auto Mode] and 
[Force Retune].


Ron W5RKN

-Original Message- 
From: K8EHB Gary

Sent: Saturday, March 10, 2012 2:29 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

Hi All,

I had my first chance to play radio today since upgrading to the new
release. I noticed on the F3K ATU form a box labeled [Auto Mode]. So I
checked the box and pressed the ATU button to get things going. I made a
couple of band changes and heard some clicking in the radio each time and
thought cool. My F3K ATU now works like the ATU in a "legacy" radio. This
function seems to work on all bands for me except 12m. Every time I select
12m the ATU goes into bypass which I wasn't surprised since my loop is flat
on 12m. But when I changed to a band with a know higher SWR it stays in
bypass until I press the ATU button. Now I've not tried doing a database
reset, or transmitting to see if that causing it to perform a tune. I
thought would ask the question here first to see what others have
experienced. I also don't remember seeing anything about this in the
release notes.


73,
...Gary, K8EHB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: 
http://www.flexradio.com/ 



___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PowerSDR 2.3.5 Flex3000 ATU Form

[K8EHB Gary]

Hi All,

I had my first chance to play radio today since upgrading to the new
release. I noticed on the F3K ATU form a box labeled [Auto Mode]. So I
checked the box and pressed the ATU button to get things going. I made a
couple of band changes and heard some clicking in the radio each time and
thought cool. My F3K ATU now works like the ATU in a "legacy" radio. This
function seems to work on all bands for me except 12m. Every time I select
12m the ATU goes into bypass which I wasn't surprised since my loop is flat
on 12m. But when I changed to a band with a know higher SWR it stays in
bypass until I press the ATU button. Now I've not tried doing a database
reset, or transmitting to see if that causing it to perform a tune. I
thought would ask the question here first to see what others have
experienced. I also don't remember seeing anything about this in the
release notes.


73,
...Gary, K8EHB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

[Flexradio] PowerSDR 2.3.5

[k4xtt]

Thank you guys for the updated program.  Very well worth the wait.  I 
really like the new layout and the incorporation of VAC2 is really out 
of this world!
I see a couple of little things that might be worked on but all in all a 
very excellent release.


Thanks so much again:
Victor Alger  K4XTT

___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/