Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer +NCS-3240 +Heil ProSet
Dan, Try turning on the monitor (MON button on top left of console) to listen to your transmitted audio. If your audio sounds good there, then the software is working correctly. If this is the case, you may want to try to transmit on HF bands to make sure things are working correctly inside the radio. Let us know how it turns out. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Dan Hammill > Sent: Tuesday, January 03, 2006 2:05 AM > To: FlexRadio@flex-radio.biz > Subject: Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer +NCS- > 3240 +Heil ProSet > > Hi Tim, > > Delta 44. Thanks for the tip. Channel 3 shows plenty of audio that > follows > my voice when I talk into the mike, so that means that the > Mic=>NCS-3240=>SDR-1K Front Panel=>Back Panel=>D44 Ch 3/4 path is all > connected properly. The disconnect must be in the software setup. > > Dan > > -Original Message- > From: Tim Ellison [mailto:[EMAIL PROTECTED] > Sent: Monday, January 02, 2006 6:52 PM > To: Dan Hammill; FlexRadio@flex-radio.biz > Subject: RE: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + > NCS-3240 +Heil ProSet > > Dan, > > What sound card are you using? If you have the Delta-44, open the Delta > Control panel. When you talk into the mic (no PTT) you should see signal > in > channel 3 IN. If not, audio is not getting to the sound card. > > -Tim > --- > Tim Ellison ( [EMAIL PROTECTED] ) > Integrated Technical Services ( http://www.itsco.com ) > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Hammill > Sent: Monday, January 02, 2006 9:42 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 > +Heil ProSet > > Well, I have my new SDR-1000 set up with all of the above. The N6CA > sequencer works fine, Pin 7 XVTR PTT works fine, and SDR-1000 PTT works > fine. I can even hear the background TX leakage from the SDR-1000+DEMI > combo in the IC-746PRO on 2m. But - no TX audio. > > I use the NCS 3240 Multi-Switcher + Heil ProSet with my IC-746PRO and it's > good. Other than quintuple-checking my Mic wiring, which I've already > done > twice, does anyone have any suggestions on how to make this thing talk? > > Tnx & 73, > Dan KB5MY/6 DM13nc > > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > > > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer +NCS-3240 +Heil ProSet
Dan, Great. What signal levels do you see on the D44 Monitor? I get an average signal level of between -18 & -12 dB. I have the PowerSDR mic gain set at 32 and that sees to give me 0 dB when the TX Meter is set to ALC. When you transmit, the processed signal has to get back to the rig. On the D44 Monitor you will see that in WavOut 3/4 with an output of -12 dB The other thing to check is if you have VAC installed, when it is enabled, it disrupts audio coming from the mic. Check those thing and let's see how far we get. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Hammill Sent: Tuesday, January 03, 2006 3:05 AM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer +NCS-3240 +Heil ProSet Hi Tim, Delta 44. Thanks for the tip. Channel 3 shows plenty of audio that follows my voice when I talk into the mike, so that means that the Mic=>NCS-3240=>SDR-1K Front Panel=>Back Panel=>D44 Ch 3/4 path is all connected properly. The disconnect must be in the software setup. Dan -Original Message- From: Tim Ellison [mailto:[EMAIL PROTECTED] Sent: Monday, January 02, 2006 6:52 PM To: Dan Hammill; FlexRadio@flex-radio.biz Subject: RE: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet Dan, What sound card are you using? If you have the Delta-44, open the Delta Control panel. When you talk into the mic (no PTT) you should see signal in channel 3 IN. If not, audio is not getting to the sound card. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Hammill Sent: Monday, January 02, 2006 9:42 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet Well, I have my new SDR-1000 set up with all of the above. The N6CA sequencer works fine, Pin 7 XVTR PTT works fine, and SDR-1000 PTT works fine. I can even hear the background TX leakage from the SDR-1000+DEMI combo in the IC-746PRO on 2m. But - no TX audio. I use the NCS 3240 Multi-Switcher + Heil ProSet with my IC-746PRO and it's good. Other than quintuple-checking my Mic wiring, which I've already done twice, does anyone have any suggestions on how to make this thing talk? Tnx & 73, Dan KB5MY/6 DM13nc ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet
Hi Tim, Delta 44. Thanks for the tip. Channel 3 shows plenty of audio that follows my voice when I talk into the mike, so that means that the Mic=>NCS-3240=>SDR-1K Front Panel=>Back Panel=>D44 Ch 3/4 path is all connected properly. The disconnect must be in the software setup. Dan -Original Message- From: Tim Ellison [mailto:[EMAIL PROTECTED] Sent: Monday, January 02, 2006 6:52 PM To: Dan Hammill; FlexRadio@flex-radio.biz Subject: RE: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet Dan, What sound card are you using? If you have the Delta-44, open the Delta Control panel. When you talk into the mic (no PTT) you should see signal in channel 3 IN. If not, audio is not getting to the sound card. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Hammill Sent: Monday, January 02, 2006 9:42 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet Well, I have my new SDR-1000 set up with all of the above. The N6CA sequencer works fine, Pin 7 XVTR PTT works fine, and SDR-1000 PTT works fine. I can even hear the background TX leakage from the SDR-1000+DEMI combo in the IC-746PRO on 2m. But - no TX audio. I use the NCS 3240 Multi-Switcher + Heil ProSet with my IC-746PRO and it's good. Other than quintuple-checking my Mic wiring, which I've already done twice, does anyone have any suggestions on how to make this thing talk? Tnx & 73, Dan KB5MY/6 DM13nc ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet
Dan, What sound card are you using? If you have the Delta-44, open the Delta Control panel. When you talk into the mic (no PTT) you should see signal in channel 3 IN. If not, audio is not getting to the sound card. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Hammill Sent: Monday, January 02, 2006 9:42 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 +Heil ProSet Well, I have my new SDR-1000 set up with all of the above. The N6CA sequencer works fine, Pin 7 XVTR PTT works fine, and SDR-1000 PTT works fine. I can even hear the background TX leakage from the SDR-1000+DEMI combo in the IC-746PRO on 2m. But - no TX audio. I use the NCS 3240 Multi-Switcher + Heil ProSet with my IC-746PRO and it's good. Other than quintuple-checking my Mic wiring, which I've already done twice, does anyone have any suggestions on how to make this thing talk? Tnx & 73, Dan KB5MY/6 DM13nc ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] SDR-1000 + DEMI 144-28HP + N6CA Sequencer + NCS-3240 + Heil ProSet
Well, I have my new SDR-1000 set up with all of the above. The N6CA sequencer works fine, Pin 7 XVTR PTT works fine, and SDR-1000 PTT works fine. I can even hear the background TX leakage from the SDR-1000+DEMI combo in the IC-746PRO on 2m. But - no TX audio. I use the NCS 3240 Multi-Switcher + Heil ProSet with my IC-746PRO and it's good. Other than quintuple-checking my Mic wiring, which I've already done twice, does anyone have any suggestions on how to make this thing talk? Tnx & 73, Dan KB5MY/6 DM13nc