Jim, are you testing into a dummy load?
If you take the top cover off, do you see the LEDs
on the tuner blink?
The tuner manual is the Z-100 Operations Manual from
the Flex-Radio web site.
I'm guessing that the ATU is communicating with the
SDR-1000, because if it isn't, PowerSDR has a pop up
error message.
You can also get the manual on the LDG web site (Z-100)
http://www.ldgelectronics.com/manuals.html
The red and green LEDs tell the status and SWR.
I tried using a couple of glass fibers out the
gap between the front panel and top cover, but
too small for enough light. I will try some big
plastic fibers. You can see the LEDs through the fan.
---
For me, I think the ATU sometimes remembers what it
was tuned for, even though I am in Bypass.
I use the ATU on a reactive load and it tunes for that.
Then I select Bypass and switch to a dummy load.
The SWR is high until I tune in Full for the dummy load.
Does anyone else have this too?
Mike - AA8K
Jim, W4ATK wrote:
I have the SDR-1000 configured with the 100W amp and tuner. With the tuner
in Byp mode, click TUN, Pwr Out indicates 12W. With tuner in Full mode,
click TUN, Pwr Out = 0 Watts. Something is amiss here.
Jim, W4ATK
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
