Re: [Flexradio] list has been quiet?
If you are using svn, you simply update and 732 will appear. The differences with 701 are absolutely minor. I removed a debug statement that was printing out 0 or 1 if you selected Iambic Mode A or B. I forgot to remove it! For those not running the debugger in MS Visual Studio, etc. you will never see the difference. So the update to 732 was strictly a minor technical issue not really having an impact on performance and done primarily to clean up the svn source tree. Bob Gerald Capodieci wrote: I'm getting used to 701(working fine). Should I try something higher? If so where can I get a copy? Jerry Mel Whitten [EMAIL PROTECTED] wrote: Thanks Bob...at 732 now! Mel, K0PFX -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx - Original Message - From: Jim Lux [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Tuesday, October 31, 2006 9:56 PM Subject: [Flexradio] list has been quiet? Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Here the title bar says : v1.6.3 SVN: 724/A 73, José F5JD Mike King - KM0T a écrit : Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx - Original Message - From: Jim Lux [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Tuesday, October 31, 2006 9:56 PM Subject: [Flexradio] list has been quiet? Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Bonjour Bob Please throw some light on this question (stylistic device which means am I right ?) : There are two branches which take you to two different Powersdr.exe. One you just fixed and labeled 732, Another with K2OX Wave special, classified 724/A 73 José F5JD Mike King - KM0T a écrit : Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Bonjour José: I hope this is more light than heat! We have always been open to others having their own branches to do experimentation under the flex svn server maintained for us by Dale. John Eckert, K2OX, has begun an experimental branch to take alternative approaches to several things. This is not unlike Jeff Andersen did before. John has chosen to use our server, while Jeff did not. We have consumed Jeff's great ideas into the current console and it has, in my opinion, provided us with a much better console. We did not follow Jeff's prescription exactly, we mined it for good ideas and did our own implementations and added a couple of other goodies (watch receivers, etc). Eric has done a great job in interpreting Jeff's vision while making it his own in terms of code he would like to support. We do not want to have to fight in the code with everyone that wants to do their own experiments. Thus the branch makes all our lives easier. This is very common in these open source developments. The main code has been and will continue to be under the trunk directory. John is a newbie to svn. Just like we ALL were when this started. Remember when there was open rebellion because we were not going to give away early updates any more? In fact, svn has made that so much easier and better it has caused us to learn that we are separated by our experience level in these areas and the lead developers need to do a better job of communicating the intent rather than just saying the technical words. John made a mistake. He accidentally overwrote the trunk with half of his experimental code. We were very lucky to have svn. It allowed first Eric to restore the binary and then me to restore all of the source code through a sequence of tricky little moves which included deletion of the offending code and/or directories and adding the correct versions back. Eric is away on some personal business right now so I took it upon myself to help him. I hope I succeeded! Bob José Dumoulin wrote: Bonjour Bob Please throw some light on this question (stylistic device which means am I right ?) : There are two branches which take you to two different Powersdr.exe. One you just fixed and labeled 732, Another with K2OX Wave special, classified 724/A 73 José F5JD Mike King - KM0T a écrit : Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage
Re: [Flexradio] list has been quiet ? (Not so after all)
Perfectly clear, Bob. José Robert McGwier a écrit : Bonjour José: I hope this is more light than heat! We have always been open to others having their own branches to do experimentation under the flex svn server maintained for us by Dale. John Eckert, K2OX, has begun an experimental branch to take alternative approaches to several things. This is not unlike Jeff Andersen did before. John has chosen to use our server, while Jeff did not. We have consumed Jeff's great ideas into the current console and it has, in my opinion, provided us with a much better console. We did not follow Jeff's prescription exactly, we mined it for good ideas and did our own implementations and added a couple of other goodies (watch receivers, etc). Eric has done a great job in interpreting Jeff's vision while making it his own in terms of code he would like to support. We do not want to have to fight in the code with everyone that wants to do their own experiments. Thus the branch makes all our lives easier. This is very common in these open source developments. The main code has been and will continue to be under the trunk directory. John is a newbie to svn. Just like we ALL were when this started. Remember when there was open rebellion because we were not going to give away early updates any more? In fact, svn has made that so much easier and better it has caused us to learn that we are separated by our experience level in these areas and the lead developers need to do a better job of communicating the intent rather than just saying the technical words. John made a mistake. He accidentally overwrote the trunk with half of his experimental code. We were very lucky to have svn. It allowed first Eric to restore the binary and then me to restore all of the source code through a sequence of tricky little moves which included deletion of the offending code and/or directories and adding the correct versions back. Eric is away on some personal business right now so I took it upon myself to help him. I hope I succeeded! Bob José Dumoulin wrote: Bonjour Bob Please throw some light on this question (stylistic device which means am I right ?) : There are two branches which take you to two different Powersdr.exe. One you just fixed and labeled 732, Another with K2OX Wave special, classified 724/A 73 José F5JD Mike King - KM0T a écrit : Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link
Re: [Flexradio] list has been quiet?
Thanks Bob...at 732 now! Mel, K0PFX - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: José Dumoulin [EMAIL PROTECTED] Cc: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 10:26 AM Subject: Re: [Flexradio] list has been quiet? Bonjour José: I hope this is more light than heat! We have always been open to others having their own branches to do experimentation under the flex svn server maintained for us by Dale. John Eckert, K2OX, has begun an experimental branch to take alternative approaches to several things. This is not unlike Jeff Andersen did before. John has chosen to use our server, while Jeff did not. We have consumed Jeff's great ideas into the current console and it has, in my opinion, provided us with a much better console. We did not follow Jeff's prescription exactly, we mined it for good ideas and did our own implementations and added a couple of other goodies (watch receivers, etc). Eric has done a great job in interpreting Jeff's vision while making it his own in terms of code he would like to support. We do not want to have to fight in the code with everyone that wants to do their own experiments. Thus the branch makes all our lives easier. This is very common in these open source developments. The main code has been and will continue to be under the trunk directory. John is a newbie to svn. Just like we ALL were when this started. Remember when there was open rebellion because we were not going to give away early updates any more? In fact, svn has made that so much easier and better it has caused us to learn that we are separated by our experience level in these areas and the lead developers need to do a better job of communicating the intent rather than just saying the technical words. John made a mistake. He accidentally overwrote the trunk with half of his experimental code. We were very lucky to have svn. It allowed first Eric to restore the binary and then me to restore all of the source code through a sequence of tricky little moves which included deletion of the offending code and/or directories and adding the correct versions back. Eric is away on some personal business right now so I took it upon myself to help him. I hope I succeeded! Bob José Dumoulin wrote: Bonjour Bob Please throw some light on this question (stylistic device which means am I right ?) : There are two branches which take you to two different Powersdr.exe. One you just fixed and labeled 732, Another with K2OX Wave special, classified 724/A 73 José F5JD Mike King - KM0T a écrit : Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes).Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten [EMAIL PROTECTED] To: FlexRadio FlexRadio@flex-radio.biz Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex
Re: [Flexradio] list has been quiet?
I'm getting used to 701(working fine). Should I try something higher? If so where can I get a copy? Jerry Mel Whitten [EMAIL PROTECTED] wrote: Thanks Bob...at 732 now! Mel, K0PFX - Original Message - From: Robert McGwier To: José Dumoulin Cc: FlexRadio Sent: Wednesday, November 01, 2006 10:26 AM Subject: Re: [Flexradio] list has been quiet? Bonjour José: I hope this is more light than heat! We have always been open to others having their own branches to do experimentation under the flex svn server maintained for us by Dale. John Eckert, K2OX, has begun an experimental branch to take alternative approaches to several things. This is not unlike Jeff Andersen did before. John has chosen to use our server, while Jeff did not. We have consumed Jeff's great ideas into the current console and it has, in my opinion, provided us with a much better console. We did not follow Jeff's prescription exactly, we mined it for good ideas and did our own implementations and added a couple of other goodies (watch receivers, etc). Eric has done a great job in interpreting Jeff's vision while making it his own in terms of code he would like to support. We do not want to have to fight in the code with everyone that wants to do their own experiments. Thus the branch makes all our lives easier. This is very common in these open source developments. The main code has been and will continue to be under the trunk directory. John is a newbie to svn. Just like we ALL were when this started. Remember when there was open rebellion because we were not going to give away early updates any more? In fact, svn has made that so much easier and better it has caused us to learn that we are separated by our experience level in these areas and the lead developers need to do a better job of communicating the intent rather than just saying the technical words. John made a mistake. He accidentally overwrote the trunk with half of his experimental code. We were very lucky to have svn. It allowed first Eric to restore the binary and then me to restore all of the source code through a sequence of tricky little moves which included deletion of the offending code and/or directories and adding the correct versions back. Eric is away on some personal business right now so I took it upon myself to help him. I hope I succeeded! Bob José Dumoulin wrote: Bonjour Bob Please throw some light on this question (stylistic device which means am I right ?) : There are two branches which take you to two different Powersdr.exe. One you just fixed and labeled 732, Another with K2OX Wave special, classified 724/A 73 José F5JD Mike King - KM0T a écrit : Ah, thanks Bob, all is good here now, looks like my SVN is working now as I got it to 732 and the PowerSDR screen correlates. 73 Mike - KM0T - Original Message - From: Robert McGwier To: FlexRadio Sent: Wednesday, November 01, 2006 7:01 AM Subject: Re: [Flexradio] list has been quiet? Eric is out of pocket on leave for a bit. I have tried to clean up a little bit of a mess made by an easy to do mistake. It took two hours to get it all straight and this is trunk PowerSDR version 701 with a single update to keyd.c to remove an fprintf statement (debug output for iambic modes). Since this is an actual change to the code base, I updated to revision 732. Hopefully this completes the clean up. Bob Mike King - KM0T wrote: Yeah, speaking of which, what SVN version is PowerSDR at now?My svn says I am updated to still 724, but the software says 701. 73 -Mike -KM0T - Original Message - From: Mel Whitten To: FlexRadio Sent: Wednesday, November 01, 2006 12:06 AM Subject: Re: [Flexradio] list has been quiet? I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx -- AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat. - Einstein ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex
[Flexradio] list has been quiet?
Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Jim Lux wrote: Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com Yes, Jim, I thought maybe the reflector was down. Tom W0IVJ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
Are we already addicted to the Flexradio reflector? Ahti OH2RZ On 01/11/06, Tom Thompson [EMAIL PROTECTED] wrote: Jim Lux wrote: Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com Yes, Jim, I thought maybe the reflector was down. Tom W0IVJ ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] list has been quiet?
I think some of us are still trying to figure out how to update to past 701... :-) Mel k0pfx - Original Message - From: Jim Lux [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Tuesday, October 31, 2006 9:56 PM Subject: [Flexradio] list has been quiet? Just a test.. Jim, W6RMK James Lux, P.E. Spacecraft Radio Frequency Subsystems Group Flight Communications Systems Section Jet Propulsion Laboratory, Mail Stop 161-213 4800 Oak Grove Drive Pasadena CA 91109 tel: (818)354-2075 fax: (818)393-6875 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com