Re: AW70 AKP
Sorry AKP is for Annunciator Keyboard Panel Johnson, Alex (Foxboro) wrote: I'll start with the simplest question. What is AKP? Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Stefano Persico [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, September 26, 2001 5:45 PM To: Foxboro DCS Mail List Subject:AW70 AKP Hi all is anyone experienced with AKP on AW70 ??? I've one Plant with 70s Series running 6.2 with AKP configured which very (very !!) often freeze - stop calling displays,receiving alarms - and the only way to restore the functionality is to power-off/power-on. From CSC no trace of this problem - as i can see - so why not ask about it on Foxboro's GURU list ??? Bye Bye Stefano Persico [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
AW70 AKP
Hi all is anyone experienced with AKP on AW70 ??? I've one Plant with 70s Series running 6.2 with AKP configured which very (very !!) often freeze - stop calling displays,receiving alarms - and the only way to restore the functionality is to power-off/power-on. From CSC no trace of this problem - as i can see - so why not ask about it on Foxboro's GURU list ??? Bye Bye Stefano Persico [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Protectin Environments II
hi first of all thank's everybody for suggestions My real intention is to have same function on same displays both on AW host PX Xterm. The only thing is to avoid the access from Xterm to a given Environment which is free on AW host I tried with == xtermdmname> dmcmd passwd in environment script but nothing appen . Thanks again
Protecting Environments
hi list is it possible to have on an AW51 and on a Xterminal connected to the same environment unprotected in AW and protected on XTerm ??? Thanks My contact Persico Stefano Tel +39 586 9488514 No Fax [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
AIM HIST ODBC examples
Hi list, i'm looking for examples about importing histored data using AIM Historian ODBC driver into a spreadsheet like excel. I tried to learn about it from AIM*AT Cdrom ( there are very few examples in datalink folder) . Can someone help me ? Thanks all --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
AIM AT extraction
Hi list is it possible to estract data from AIM*Historian samples and convert them in some easy format ( ASCII ) ??? In other words is it possible to read into an ms office application samples from AIM*AT ?? Thanks --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
AIM*AT 2.5 to 3.0.2
Hi list i upgraded an AIM*AT 2.5 on a 70 station to AIM*AT 3.0 and then to 3.0.2 In docs there are no messages about this kind of upgrade but i had a great number of problems. After installation i checked instance status and i found that wasn't running with error while executing ipchisti and fetchdog process. No data recorded I try to reinstall the package with same results... I try to check API status ( stopping an restarting ) and obtained the same error. At the end i decided (an hard decision) to remove the istance an rebuild a new one but i obtained the same problems with the addition of histmain.exe crash (Dr Watson Message --- Exeption : access violation 0xc005 Address : 0x78002e40) At this point, with old data unreadable for the instance removal, i decided to reinstall the package after removing /opt/aim directory After this new installation i checked the status of the package with no istance and all worked fine. I create a new istance with a different name (hist02 inspite of hist01) and reload all rpts and all worked fine. After a reboot of the station i checked again the status and i found that hist02 (new istance) was running well but the log reported also messages about the old istance hist01 ( ipchisti and fetchdog process problems ). Another problem is no alarm history. Alarm history looked for old hist01 so i commited the station with the new hist02 After first boot all seemed to run well but after booting again the station the problem came back. This time alarm history looks for hist02 but a message advise that the system is unable to read hist02. At this point i ended my work. A very simple upgrade (as a foxboro guy told me) became hell. Now the station is collecting correctly but is not possible to read old data and no alarm history is available. I'm sorry for the long mail but i shoul describe all steps Is it only an unusual and not reproducible problem ? Is it possible to rebuild the old configuration for read again the old data ? Why the removed istance continue to exists somewhere ? I have million questions but i used much of your time ...(too much) Thanks in advance --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Displays Viewer
Hi all Does anybody know if exist a kind of viewer for FoxDraw/FoxView and Display Manager displays ? I' m trying to build a backdocumentation cd and my intention is to attach also FV-FD and/or DM display . It will be useful to have the possibility to preview these displays. Thanks in advance --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
SysDef Strange Question
Hi List i've a strange question If for some reasons my PC Sys Def file are not still available (PC burned or trashed or crashed ..) is it possible to rebuild the entire system definition ? (from IIF files or something like) Thank's --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
I/A NT
Hi list, i have few questions about I/A on NT systems 1) how is possible to redirect Operator Action Journal logs to a file ? (The only chose is to redirect these logs to a printer) 2) In the AIM Historian Archive is it possible to save only 10 files at once Is it correct or is it a bug (we can change this number ?) 3) Still about AIM*AT is it possible to manage the archived files with other software instrument or we can only use them with AIM*AT ( I know the AIM Data Link way but i want to know if it's the only way) Thanks very much to everybody --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
