RE: How to reset Frame's Default Configuration - Resolved
The bug in FM 9 10 occurs when the variables tab is attached to other tabs and in a panel. You have to remove the variables from the panel and tab so it is independent and floating. -Gillian -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Thomas, Lynn Sent: Monday, August 27, 2012 12:18 PM To: 'framers@lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration - Resolved Thank you to everyone who replied. Originally, when I opened the Variables panel from the Special menu, selected my user variable then clicked the Edit tool, the fields in the Add/Edit dialog box were completely blank. I was able to add a new user variable just fine, but when I would open the new variable to edit, again the fields were blank. That is what led me to believe that this was something wrong in my Frame configuration. When I opened the Variables panel via the Window menu however, (thank you Rick!) I am now able to edit again. Is this a bug in Frame 9?? -Original Message- From: Combs, Richard [mailto:richard.co...@polycom.com] Sent: Thursday, August 23, 2012 12:14 PM To: Thomas, Lynn; 'framers@lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration Thomas, Lynn wrote: I inadvertently converted my user variables to text in one of my documents. *All* user variables? How? Via Special Variable, you'd have to do them one at a time. I luckily had a another copy of the document stored elsewhere so I simply replaced my document. Unfortunately, I am still unable to edit user variables. When you go to Special Variable, and in the Variable dialog, select a user variable and click Edit Definition, does the Edit User Variable dialog open? IOW, what step in editing user variables are you unable to do? It seems that this dumb change I made was to FrameMaker (version 9, p255) and not to the actual document. I looked in the maker.ini file to see if there was a setting I could change and revert back to its original configuration but I didn't see anything related to variables. That's because there isn't anything variable-related in maker.ini, and there's no variable-related dumb change that you could have made to FM. Can you edit the file? (It's possible to accidentally put a file into read-only mode, but then you can't edit the text either.) I also tried replacing the maker.ini file with a backup but that didn't work either. I did find a setting for variables in the mif2rtf.ini file , and changed it to ConvertVariables=No but again, that didn't change anything. Whoa, you're way off base here -- mif2rtf.ini is a Mif2Go config file, not an FM config file. It governs the conversion process when you use Mif2Go to export an FM file to Word. I then completely uninstalled FrameMaker and reinstalled it but it is still keeping my original configuration and will not let me edit my user variables. Does anyone know how I can reset Frame to its original default configuration or at least get the option to edit my user variables back? Re-installsheimer's disease, as Dov Isaacs calls it. Your problem isn't an FM install/config problem. But I think you need to clarify exactly what steps you take and what doesn't work before anyone can help you. Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 -- ___ You are currently subscribed to framers as gillian.fl...@nexenta.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/gillian.flato%40nexenta.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to reset Frame's Default Configuration - Resolved
The bug in FM 9 & 10 occurs when the variables tab is attached to other tabs and in a panel. You have to remove the variables from the panel and tab so it is independent and floating. -Gillian -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Thomas, Lynn Sent: Monday, August 27, 2012 12:18 PM To: 'framers at lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration - Resolved Thank you to everyone who replied. Originally, when I opened the Variables panel from the Special menu, selected my user variable then clicked the Edit tool, the fields in the Add/Edit dialog box were completely blank. I was able to add a new user variable just fine, but when I would open the new variable to edit, again the fields were blank. That is what led me to believe that this was something wrong in my Frame configuration. When I opened the Variables panel via the Window menu however, (thank you Rick!) I am now able to edit again. Is this a bug in Frame 9?? -Original Message- From: Combs, Richard [mailto:richard.co...@polycom.com] Sent: Thursday, August 23, 2012 12:14 PM To: Thomas, Lynn; 'framers at lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration Thomas, Lynn wrote: > I inadvertently converted my user variables to text in one of my > documents. *All* user variables? How? Via Special > Variable, you'd have to do them one at a time. > I luckily had a another copy of the document stored elsewhere so I > simply replaced my document. Unfortunately, I am still unable to edit > user variables. When you go to Special > Variable, and in the Variable dialog, select a user variable and click Edit Definition, does the Edit User Variable dialog open? IOW, what step in editing user variables are you unable to do? > It seems that this dumb change I made > was to FrameMaker (version 9, p255) and not to the actual document. I > looked in the maker.ini file to see if there was a setting I could > change and revert back to its original configuration but I didn't see > anything related to variables. That's because there isn't anything variable-related in maker.ini, and there's no variable-related dumb change that you could have made to FM. Can you edit the file? (It's possible to accidentally put a file into read-only mode, but then you can't edit the text either.) > I also tried replacing the maker.ini > file with a backup but that didn't work either. I did find a setting > for variables in the mif2rtf.ini file , and changed it to > ConvertVariables=No but again, that didn't change anything. Whoa, you're way off base here -- mif2rtf.ini is a Mif2Go config file, not an FM config file. It governs the conversion process when you use Mif2Go to export an FM file to Word. > I then > completely uninstalled FrameMaker and reinstalled it but it is still > keeping my original configuration and will not let me edit my user > variables. Does anyone know how I can reset Frame to its original > default configuration or at least get the option to edit my user > variables back? Re-installsheimer's disease, as Dov Isaacs calls it. Your problem isn't an FM install/config problem. But I think you need to clarify exactly what steps you take and what doesn't work before anyone can help you. Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 -- ___ You are currently subscribed to framers as gillian.flato at nexenta.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/gillian.flato%40nexenta.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: How to reset Frame's Default Configuration - Resolved
Thank you to everyone who replied. Originally, when I opened the Variables panel from the Special menu, selected my user variable then clicked the Edit tool, the fields in the Add/Edit dialog box were completely blank. I was able to add a new user variable just fine, but when I would open the new variable to edit, again the fields were blank. That is what led me to believe that this was something wrong in my Frame configuration. When I opened the Variables panel via the Window menu however, (thank you Rick!) I am now able to edit again. Is this a bug in Frame 9?? -Original Message- From: Combs, Richard [mailto:richard.co...@polycom.com] Sent: Thursday, August 23, 2012 12:14 PM To: Thomas, Lynn; 'framers@lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration Thomas, Lynn wrote: I inadvertently converted my user variables to text in one of my documents. *All* user variables? How? Via Special Variable, you'd have to do them one at a time. I luckily had a another copy of the document stored elsewhere so I simply replaced my document. Unfortunately, I am still unable to edit user variables. When you go to Special Variable, and in the Variable dialog, select a user variable and click Edit Definition, does the Edit User Variable dialog open? IOW, what step in editing user variables are you unable to do? It seems that this dumb change I made was to FrameMaker (version 9, p255) and not to the actual document. I looked in the maker.ini file to see if there was a setting I could change and revert back to its original configuration but I didn't see anything related to variables. That's because there isn't anything variable-related in maker.ini, and there's no variable-related dumb change that you could have made to FM. Can you edit the file? (It's possible to accidentally put a file into read-only mode, but then you can't edit the text either.) I also tried replacing the maker.ini file with a backup but that didn't work either. I did find a setting for variables in the mif2rtf.ini file , and changed it to ConvertVariables=No but again, that didn't change anything. Whoa, you're way off base here -- mif2rtf.ini is a Mif2Go config file, not an FM config file. It governs the conversion process when you use Mif2Go to export an FM file to Word. I then completely uninstalled FrameMaker and reinstalled it but it is still keeping my original configuration and will not let me edit my user variables. Does anyone know how I can reset Frame to its original default configuration or at least get the option to edit my user variables back? Re-installsheimer's disease, as Dov Isaacs calls it. Your problem isn't an FM install/config problem. But I think you need to clarify exactly what steps you take and what doesn't work before anyone can help you. Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 -- ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to reset Frame's Default Configuration - Resolved
Thank you to everyone who replied. Originally, when I opened the Variables panel from the Special menu, selected my user variable then clicked the Edit tool, the fields in the Add/Edit dialog box were completely blank. I was able to add a new user variable just fine, but when I would open the new variable to edit, again the fields were blank. That is what led me to believe that this was something wrong in my Frame configuration. When I opened the Variables panel via the Window menu however, (thank you Rick!) I am now able to edit again. Is this a bug in Frame 9?? -Original Message- From: Combs, Richard [mailto:richard.co...@polycom.com] Sent: Thursday, August 23, 2012 12:14 PM To: Thomas, Lynn; 'framers at lists.frameusers.com' Subject: RE: How to reset Frame's Default Configuration Thomas, Lynn wrote: > I inadvertently converted my user variables to text in one of my > documents. *All* user variables? How? Via Special > Variable, you'd have to do them one at a time. > I luckily had a another copy of the document stored elsewhere so I > simply replaced my document. Unfortunately, I am still unable to edit > user variables. When you go to Special > Variable, and in the Variable dialog, select a user variable and click Edit Definition, does the Edit User Variable dialog open? IOW, what step in editing user variables are you unable to do? > It seems that this dumb change I made > was to FrameMaker (version 9, p255) and not to the actual document. I > looked in the maker.ini file to see if there was a setting I could > change and revert back to its original configuration but I didn't see > anything related to variables. That's because there isn't anything variable-related in maker.ini, and there's no variable-related dumb change that you could have made to FM. Can you edit the file? (It's possible to accidentally put a file into read-only mode, but then you can't edit the text either.) > I also tried replacing the maker.ini > file with a backup but that didn't work either. I did find a setting > for variables in the mif2rtf.ini file , and changed it to > ConvertVariables=No but again, that didn't change anything. Whoa, you're way off base here -- mif2rtf.ini is a Mif2Go config file, not an FM config file. It governs the conversion process when you use Mif2Go to export an FM file to Word. > I then > completely uninstalled FrameMaker and reinstalled it but it is still > keeping my original configuration and will not let me edit my user > variables. Does anyone know how I can reset Frame to its original > default configuration or at least get the option to edit my user > variables back? Re-installsheimer's disease, as Dov Isaacs calls it. Your problem isn't an FM install/config problem. But I think you need to clarify exactly what steps you take and what doesn't work before anyone can help you. Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 --
