I haven't been able to boot a -current kernel since the ATAng import.
They all die after (in a boot -v) a message from GEOM about creating ad0.
If any further info would be helpful, just let me know what you need.
--
Michael McGoldrick: [EMAIL PROTECTED]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #24: Sat Aug 23 16:42:47 BST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/URIEL
Preloaded elf kernel /boot/kernel.old/kernel at 0xc05bd000.
Preloaded userconfig_script /boot/kernel.conf at 0xc05bd1d0.
Preloaded elf module /boot/kernel.old/linux.ko at 0xc05bd220.
Preloaded elf module /boot/kernel.old/ng_ubt.ko at 0xc05bd2d0.
Preloaded elf module /boot/kernel.old/netgraph.ko at 0xc05bd380.
Preloaded elf module /boot/kernel.old/acpi.ko at 0xc05bd434.
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel Pentium III (546.62-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x681 Stepping = 1
Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory = 134152192 (127 MB)
avail memory = 123867136 (118 MB)
Pentium Pro MTRR support enabled
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: Acer M1615on motherboard
ACPI-0981: *** Error: GPE0 block (GPE 0 to 15) overlaps the GPE1 block (GPE 10 to
25) - Ignoring GPE1
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7900
acpi0: power button is handled as a fixed feature programming model.
acpi_cpu0: CPU port 0x530-0x537 on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pcib0: slot 2 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 19 INTA is routed to irq 10
pcib0: slot 20 INTB is routed to irq 10
pcib0: slot 20 INTC is routed to irq 11
pcib0: slot 20 INTD is routed to irq 5
pcib0: slot 20 INTA is routed to irq 9
agp0: Ali Generic host to PCI bridge mem 0xe000-0xe3ff at device 0.0 on pci0
pcib1: PCI-PCI bridge at device 1.0 on pci0
pci1: PCI bus on pcib1
pcib0: slot 1 INTA is routed to irq 9
pcib1: slot 0 INTA is routed to irq 9
pci1: display, VGA at device 0.0 (no driver attached)
ohci0: AcerLabs M5237 (Aladdin-V) USB controller mem 0x9080-0x90800fff irq 10 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: AcerLabs M5237 (Aladdin-V) USB controller on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
umass0: PQI Travel Flash, rev 1.10/2.05, addr 3
umass0: SCSI over Bulk-Only; quirks = 0x
umass0:0:0:-1: Attached to scbus0
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: PCI-ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
csa0: CS4280/CS4614/CS4622/CS4624/CS4630 mem
0x9050-0x905f,0x9040-0x90400fff irq 5 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: CS461x PCM Audio on csa0
pcm0: Cirrus Logic CS4297 AC97 Codec
atapci0: AcerLabs Aladdin UDMA33 controller port 0x8400-0x840f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
rl0: RealTek 8139 10/100BaseTX, rev. B port 0x8000-0x80ff mem 0x82103400-0x821034ff
irq 10 at device 19.0 on pci0
rl0: Ethernet address: 00:60:67:76:6e:bf
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci1: AcerLabs M5237 (Aladdin-V) USB controller mem 0x8210-0x82100fff irq 10 at
device 20.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: AcerLabs M5237 (Aladdin-V) USB controller on ohci1
usb1: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci2: AcerLabs M5237 (Aladdin-V) USB controller mem 0x82101000-0x82101fff irq 11 at
device 20.1 on pci0
usb2: OHCI version 1.0, legacy support
usb2: AcerLabs M5237 (Aladdin-V) USB controller on ohci2
usb2: USB revision 1.0
uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci3: AcerLabs M5237 (Aladdin-V) USB controller mem 0x82102000-0x82102fff irq 5 at
device 20.2 on pci0
usb3: OHCI version 1.0, legacy support
usb3: AcerLabs M5237 (Aladdin-V) USB controller on ohci3
usb3: USB revision 1.0
uhub4: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0: EHCI (generic) USB 2.0 controller mem 0x82103000-0x821030ff irq 9 at device
20.3 on pci0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb1 usb2
