On Tue, 21 Dec 1999, Andrey A. Chernov wrote:
With latest ppp I hear no phone numbers dial sounds at the stage:
Phase: Phone: N
ppp does _nothing_ until timeout occurse, then redial happens
with the same unsuccessful result.
I'm seeing the exact same thing. It appears that the phone number
substition is broken in the dial string. It work for me, if I replace \\T
with the number I want to dial.
Once I got it working, something else I saw that I thought was odd, maybe
due to the mbuf changes in ppp, is when doing a cvsup of a large file, I
get the log messages below and then ppp dies. Specifically it was choking
on one of the uuencided compat libs just committed.
-- Begin Log Messages --
Dec 20 20:15:35 ender ppp[5719]: tun0: Error: Request for mbuf size
2872 denied
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: PPP Terminated (71).
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: LayerDown:
204.179.134.192
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: Using trigger address 0.0.0.0
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: SendTerminateReq(3)
state = Opened
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: State change Opened
-- Closing
Dec 20 20:15:35 ender ppp[5719]: tun0: Error: Oops, destroying a datalink
in state open
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: deflink: Connect time: 604
secs: 724617 octets in, 1007191 octets out
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: total 2867 bytes/sec, peak
6971 bytes/sec on Mon Dec 20 20:15:35 1999
-- End Log Messages --
My currently working config is below:
default:
#
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT\\T TIMEOUT 40 CONNECT"
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
ricochet:
set device /dev/cuaa0
set speed 57600
set parity even
set ctsrts on
set phone 777
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT777 TIMEOUT 40 CONNECT"
set timeout 0
delete! default
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
delete ALL
add 0 0 HISADDR
Here is my previously working config:
default:
#
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT\\T TIMEOUT 40 CONNECT"
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
ricochet:
set device /dev/cuaa0
set speed 57600
set parity even
set ctsrts on
set phone 777
set timeout 0
delete! default
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
delete ALL
add 0 0 HISADDR
--
Christopher Nielsen
(enkhyl|cnielsen)@pobox.com
Enkhyl on IRC
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message