Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
[EMAIL PROTECTED] wrote: I bought an ASUS motherboard with onboard SATA II controller. I attached 2 HDs SATA II but when I run dmesg I notice that my system sees them as normal older SATA 150 instead of SATA 300. Is there any suggestion to solve this problem ? Have a nice day. --dmesg output--- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p1 #0: Fri Jun 2 15:41:03 CEST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMOS-SMP WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.38-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf62 Stepping = 2 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0xe43dSSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,b14,b15 AMD Features=0x2000LM AMD Features2=0x1LAHF Cores per package: 2 real memory = 2138701824 (2039 MB) avail memory = 2087825408 (1991 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0 cpu0: ACPI CPU on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 cpu1: ACPI CPU on acpi0 atapci0: ITE IT8211F UDMA133 controller port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f irq 19 at device 4.0 on pci1 ata2: ATA channel 0 on atapci0 ata3: ATA channel 1 on atapci0 atapci1: Intel ICH7 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: ATA channel 0 on atapci1 ata1: ATA channel 1 on atapci1 atapci2: Intel ICH7 SATA300 controller port 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f irq 17 at device 31.2 on pci0 atapci2: failed to enable memory mapping! ata4: ATA channel 0 on atapci2 ata5: ATA channel 1 on atapci2 acd0: DVDROM HL-DT-STDVD-ROM GDR8163B/0L23 at ata0-master UDMA33 ad8: 114473MB WDC WD1200JS-00MHB0 02.01C03 at ata4-master SATA150 GEOM_MIRROR: Device gm0 created (id=2415013281). GEOM_MIRROR: Device gm0: provider ad8 detected. ad10: 114473MB WDC WD1200JS-00MHB0 02.01C03 at ata5-master SATA150 GEOM_MIRROR: Device gm0: provider ad10 detected. SMP: AP CPU #1 Launched! GEOM_MIRROR: Device gm0: provider ad10 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. GEOM_MIRROR: Device gm0: rebuilding provider ad8. Trying to mount root from ufs:/dev/mirror/gm0s1a em0: link state changed to UP hello my similar problem motherboard with the Intel G31 Express Chipset |# output 'dmesg' (|partially|) atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ad7: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-slave SATA150 # atacontrol cap ad7 Protocol Serial ATA II device model WDC WD5000AAKS-00YGA0 serial number WD-WCAS87395070 firmware revision 12.01C02 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 976773168 sectors dma supported overlap not supported Feature Support EnableValue Vendor write cacheyes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 254/0xFE128/0x80 # atacontrol mode ad7 current mode = SATA150 # output 'pciconf -lv' (|partially|) [EMAIL PROTECTED]:0:31:2:class=0x01018f card=0x26391019 chip=0x27c08086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller' class = mass storage subclass = ATA # uname -a FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008 root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008 root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. -- WBR, Andrey V. Elsukov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results So the jumpers were set wrong to begin with, but fixing them didnt help? Check your BIOS SATA support or look for an upgrade. Kris ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Kris Kennaway wrote: sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results So the jumpers were set wrong to begin with, but fixing them didnt help? i`am tried all positions from specification Check your BIOS SATA support or look for an upgrade. BIOS is support SATA have 2 modes (Compatible, Enchanced) i`am tried both modes without results BIOS firmware is upgraded to last /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. Actually, I don't need to -- I'm using WD5000AAKS disks myself on that exact system: atapci1: Intel AHCI controller port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: ATA channel 0 on atapci1 ata2: [ITHREAD] ata3: ATA channel 1 on atapci1 ata3: [ITHREAD] ata4: ATA channel 2 on atapci1 ata4: [ITHREAD] ata5: ATA channel 3 on atapci1 ata5: [ITHREAD] ad6: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-master SATA300 ad8: 476940MB WDC WD5000AAKS-00TMA0 12.01C01 at ata4-master SATA300 icarus# atacontrol cap ad6 Protocol Serial ATA II device model WDC WD5000AAKS-00YGA0 serial number WD-WCAS83974519 firmware revision 12.01C02 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 976773168 sectors dma supported overlap not supported Feature Support EnableValue Vendor write cacheyes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 254/0xFE128/0x80 icarus# atacontrol cap ad8 Protocol Serial ATA II device model WDC WD5000AAKS-00TMA0 serial number WD-WCAPW2137942 firmware revision 12.01C01 cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 976773168 sectors dma supported overlap not supported Feature Support EnableValue Vendor write cacheyes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 254/0xFE128/0x80 icarus# atacontrol mode ad6 current mode = SATA300 icarus# atacontrol mode ad8 current mode = SATA300 -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
sam wrote: So the jumpers were set wrong to begin with, but fixing them didnt help? i`am tried all positions from specification Check your BIOS SATA support or look for an upgrade. BIOS is support SATA have 2 modes (Compatible, Enchanced) i`am tried both modes without results Can you show `ident /boot/kernel/kernel | grep ata-chipset` output? -- WBR, Andrey V. Elsukov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Andrey V. Elsukov wrote: sam wrote: So the jumpers were set wrong to begin with, but fixing them didnt help? i`am tried all positions from specification Check your BIOS SATA support or look for an upgrade. BIOS is support SATA have 2 modes (Compatible, Enchanced) i`am tried both modes without results Can you show `ident /boot/kernel/kernel | grep ata-chipset` output? # ident /boot/kernel/kernel | grep ata-chipset $FreeBSD: src/sys/dev/ata/ata-chipset.c,v 1.202.2.11 2008/08/02 12:34:49 remko Exp $ /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. Actually, I don't need to -- I'm using WD5000AAKS disks myself on that exact system: atapci1: Intel AHCI controller port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: ATA channel 0 on atapci1 ata2: [ITHREAD] ata3: ATA channel 1 on atapci1 ata3: [ITHREAD] ata4: ATA channel 2 on atapci1 ata4: [ITHREAD] ata5: ATA channel 3 on atapci1 ata5: [ITHREAD] ad6: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-master SATA300 ad8: 476940MB WDC WD5000AAKS-00TMA0 12.01C01 at ata4-master SATA300 may issue in Intel ICH7 SATA300 controller driver ? atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
On Thu, Aug 14, 2008 at 12:02:50PM +0400, sam wrote: Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. Actually, I don't need to -- I'm using WD5000AAKS disks myself on that exact system: atapci1: Intel AHCI controller port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: ATA channel 0 on atapci1 ata2: [ITHREAD] ata3: ATA channel 1 on atapci1 ata3: [ITHREAD] ata4: ATA channel 2 on atapci1 ata4: [ITHREAD] ata5: ATA channel 3 on atapci1 ata5: [ITHREAD] ad6: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-master SATA300 ad8: 476940MB WDC WD5000AAKS-00TMA0 12.01C01 at ata4-master SATA300 may issue in Intel ICH7 SATA300 controller driver ? atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 Possibly. All my Intel ICH7 boards have AHCI capability, and I use it. See Chapter 4 here: http://www.supermicro.com/manuals/motherboard/3000/MNL-0889.pdf If your motherboard does, I'd recommend enabling it as well and see if things change. Regarding the Enhanced vs. Compatible mode: use Enhanced. On my boards, choosing Enhanced makes the AHCI and Intel MatrixRAID options appear. I'm fairly certain you don't need AHCI to get SATA300, though. I would recommend you re-check the jumpers on your disks to make sure you didn't make a mistake when adjusting things. -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:02:50PM +0400, sam wrote: Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. Actually, I don't need to -- I'm using WD5000AAKS disks myself on that exact system: atapci1: Intel AHCI controller port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: ATA channel 0 on atapci1 ata2: [ITHREAD] ata3: ATA channel 1 on atapci1 ata3: [ITHREAD] ata4: ATA channel 2 on atapci1 ata4: [ITHREAD] ata5: ATA channel 3 on atapci1 ata5: [ITHREAD] ad6: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-master SATA300 ad8: 476940MB WDC WD5000AAKS-00TMA0 12.01C01 at ata4-master SATA300 may issue in Intel ICH7 SATA300 controller driver ? atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 Possibly. All my Intel ICH7 boards have AHCI capability, and I use it. See Chapter 4 here: http://www.supermicro.com/manuals/motherboard/3000/MNL-0889.pdf If your motherboard does, I'd recommend enabling it as well and see if things change. Regarding the Enhanced vs. Compatible mode: use Enhanced. On my boards, choosing Enhanced makes the AHCI and Intel MatrixRAID options appear. I'm fairly certain you don't need AHCI to get SATA300, though. I would recommend you re-check the jumpers on your disks to make sure you didn't make a mistake when adjusting things. - HDD on position: all jumpers removed; - SATA controller in Enchanced mode; - no option AHCI in BIOS without results /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
On Thu, Aug 14, 2008 at 01:01:44PM +0400, sam wrote: Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:02:50PM +0400, sam wrote: Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 12:16:16AM -0700, Jeremy Chadwick wrote: On Thu, Aug 14, 2008 at 10:57:53AM +0400, sam wrote: Andrey V. Elsukov wrote: sam wrote: FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008root@:/usr/obj/usr/src/sys/GENERIC i386 | please, any solution ? Probably speed is limited via jumpers on your hard drive. http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1409p_created=#jumper tried it without results FWIW, the only time I've seen this happen is when there's a jumper limiting the capability. You should have **removed** the OPT1 jumper, and left any other jumpers alone. If you're absolutely sure the jumper is removed, I'll purchase one of these drives and test it on an ICH7 (Supermicro PDSMi+) to confirm your findings. Actually, I don't need to -- I'm using WD5000AAKS disks myself on that exact system: atapci1: Intel AHCI controller port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: ATA channel 0 on atapci1 ata2: [ITHREAD] ata3: ATA channel 1 on atapci1 ata3: [ITHREAD] ata4: ATA channel 2 on atapci1 ata4: [ITHREAD] ata5: ATA channel 3 on atapci1 ata5: [ITHREAD] ad6: 476940MB WDC WD5000AAKS-00YGA0 12.01C02 at ata3-master SATA300 ad8: 476940MB WDC WD5000AAKS-00TMA0 12.01C01 at ata4-master SATA300 may issue in Intel ICH7 SATA300 controller driver ? atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 Possibly. All my Intel ICH7 boards have AHCI capability, and I use it. See Chapter 4 here: http://www.supermicro.com/manuals/motherboard/3000/MNL-0889.pdf If your motherboard does, I'd recommend enabling it as well and see if things change. Regarding the Enhanced vs. Compatible mode: use Enhanced. On my boards, choosing Enhanced makes the AHCI and Intel MatrixRAID options appear. I'm fairly certain you don't need AHCI to get SATA300, though. I would recommend you re-check the jumpers on your disks to make sure you didn't make a mistake when adjusting things. - HDD on position: all jumpers removed; - SATA controller in Enchanced mode; - no option AHCI in BIOS without results I'm out of ideas. Others will have to continue helping... -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
sam wrote:
# ident /boot/kernel/kernel | grep ata-chipset
$FreeBSD: src/sys/dev/ata/ata-chipset.c,v 1.202.2.11 2008/08/02
12:34:49 remko Exp $
Can you apply attached patch, rebuild your kernel, reboot in verbose
mode and show /var/run/dmesg.boot ?
--
WBR, Andrey V. Elsukov
--- ata-chipset.c.orig 2008-08-12 08:31:14.0 +0400
+++ ata-chipset.c 2008-08-14 13:31:40.0 +0400
@@ -2193,6 +2193,11 @@
ctlr-allocate = ata_intel_allocate;
ctlr-reset = ata_intel_reset;
+ if (bootverbose) {
+ device_printf(dev, SCRD = 0x%08x, SATACR1 = 0x%08x\n,
+ pci_read_config(dev, 0x94, 4),
+ pci_read_config(dev, 0xac, 4));
+ }
/*
* if we have AHCI capability and AHCI or RAID mode enabled
* in BIOS we try for AHCI mode
___
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
Andrey V. Elsukov wrote: sam wrote: # ident /boot/kernel/kernel | grep ata-chipset $FreeBSD: src/sys/dev/ata/ata-chipset.c,v 1.202.2.11 2008/08/02 12:34:49 remko Exp $ Can you apply attached patch, rebuild your kernel, reboot in verbose mode and show /var/run/dmesg.boot ? http://cs.udmvt.ru/files/temp/dmesg.boot_0814 /Vladimir Ermakov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
sam wrote: Can you apply attached patch, rebuild your kernel, reboot in verbose mode and show /var/run/dmesg.boot ? http://cs.udmvt.ru/files/temp/dmesg.boot_0814 It seems that driver couldn't allocate IO resource at BAR5 and without this resource it can't read SATA Status register and determine negotiated speed. I think the problem is in your BIOS. If your BIOS doesn't have any AHCI or RAID specific options I don't know how correctly fix this problem. -- WBR, Andrey V. Elsukov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
On Thu, Aug 14, 2008 at 03:56:32PM +0400, Andrey V. Elsukov wrote: sam wrote: Can you apply attached patch, rebuild your kernel, reboot in verbose mode and show /var/run/dmesg.boot ? http://cs.udmvt.ru/files/temp/dmesg.boot_0814 It seems that driver couldn't allocate IO resource at BAR5 and without this resource it can't read SATA Status register and determine negotiated speed. I think the problem is in your BIOS. If your BIOS doesn't have any AHCI or RAID specific options I don't know how correctly fix this problem. Andrey, please correct me if I'm wrong here. I'm not familiar these kernel functions, but assuming pci_read_config() handles proper byte order, and device_printf() prints it in correct order, then I believe you may be missing something important. I haven't looked for any product Errata, but see Section 12.1 below (specific to ICH7): http://www.intel.com/assets/pdf/datasheet/307013.pdf Index 0x94 = SIR (SATA Index Register) Index 0xAC = SCAP1 (SATA Capability Register 1) I'm not sure why you called SIR SCRD in your device_printf(). For SIR's description, see Section 12.1.35. For SCAP1, see Section 12.1.39. The SIR value is 0x4180, broken down into binary nibbles: %0100 0001 1000 ^ ^ This indicates bit 30 is set. According to Intel's docs, bit 30 disables SCAP0 and SCAP1, thus will cause them to always return 0: Bit 30 SATA Capability Registers Disable (SCRD) When this bit is set, the SATA Capability Registers are disabled. That is, SATA Capability Registers 0 and 1 are both changed to Read Only with the value of h. Also, the Next Capability bits in the PCI Power Management Capability Information Register (D31:F2;Offset 70h bits 15:8) are changed to 00h, to indicate that the PCI Power Management Capability structure is the last PCI capability structure in the SATA controller. When this bit is cleared, the SATA Capability Registers are enabled. A quick glance seems to indicate we're not initialising some of the SATA registers at all, case in point. Someone should make a patch for the user that zeros out bit 30 of SIR, then check the xBAR and LBAR values; zeroing bit 30 might get him SATA300 support (I haven't looked at the rest of the FreeBSD ATA code yet). -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kern/98388: [ata] FreeBSD 6.1 - WDC WD1200JS SATA II disks are seen as older SATA
14.08.08, 16:47, Jeremy Chadwick [EMAIL PROTECTED]: On Thu, Aug 14, 2008 at 03:56:32PM +0400, Andrey V. Elsukov wrote: sam wrote: Can you apply attached patch, rebuild your kernel, reboot in verbose mode and show /var/run/dmesg.boot ? http://cs.udmvt.ru/files/temp/dmesg.boot_0814 It seems that driver couldn't allocate IO resource at BAR5 and without this resource it can't read SATA Status register and determine negotiated speed. I think the problem is in your BIOS. If your BIOS doesn't have any AHCI or RAID specific options I don't know how correctly fix this problem. Andrey, please correct me if I'm wrong here. I'm not familiar these kernel functions, but assuming pci_read_config() handles proper byte order, and device_printf() prints it in correct order, then I believe you may be missing something important. My decision is not from output of my changes. Here is in log: found- vendor=0x8086, dev=0x27c0, revid=0x01 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc880, size 3, enabled map[14]: type I/O Port, range 32, base 0xc800, size 2, enabled map[18]: type I/O Port, range 32, base 0xc480, size 3, enabled map[1c]: type I/O Port, range 32, base 0xc400, size 2, enabled map[20]: type I/O Port, range 32, base 0xc080, size 4, enabled BAR5 is not present here. Also atapci1: Intel ICH7 SATA300 controller port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc080 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: SCRD = 0x4180, SATACR1 = 0x There should be resource allocation: rid 0x24 type 3 for AHCI or rid 0x24 type 4 for non-AHCI. But here are nothing of these. ata2: ATA channel 0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc880 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc800 Someone should make a patch for the user that zeros out bit 30 of SIR, then check the xBAR and LBAR values; zeroing bit 30 might get him SATA300 support (I haven't looked at the rest of the FreeBSD ATA code yet). I think you can try to do it. But i don't have this hardware and trying to change some bits, making patches, waiting for results, again and again - it's not very interesting for me (i already have similar experience).. In any case ICHx which is working in non-AHCI mode is not the best choice. Many SATA features don't work in this mode and difference between SATA150 and SATA300 is small. -- WBR, Andrey V. Elsukov ___ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to [EMAIL PROTECTED]
