Err - saslpasswd2: Couldn't update db + authentication failed
Hi, I am trying to install Postfix+Cyrus-IMAP+Cyrus-SASL-authd on FreeBSD system. I've installed all these s/w ... but I face some problems 1) #saslpasswd2 username #setpass succeeded for cyrus #saslpasswd2 : Couldn't update db (<== ) but I can create a new user option "-c" and also I can delete user with option "-d" but receiving the same error msg (saslpasswd2 : Couldn't update db) 2) #cyradm --user cyrus localhost #IMAP Password: *** Login failed: auththendication failure at /usr/local/lib/perl5/site_perl/5.005/i386-freebsd/Cyrus/IMAP/Admin.pm line 118 cyradm: can't authenticate to server with as cyrus (But actually the sasld successfully authendicate the request and logs in the database-mail, table-log) 3)SMTP #telnet localhost smtp # # ... #QUIT everything went fine ...but later the I found these messages in the log file * postfix/pipe: fatal: user= command-line attribute specifies mail system owner postfix group id mail * settings in master.cf are ... old-cyrus unix - nn - - pipe flags= user=cyrus argv=/usr/local/cyrus/bin/deliver -r ${sender} -m ${extension} ${user} cyrus unix - nn - - pipe flags= user=cyrus argv=/usr/local/cyrus/bin/deliver -r ${sender} -m ${extension} ${user} * -- I have set the following options in the imapd.conf file. pwcheck_method: saslauthd sasl_mech_list: plain (*) -- Used the ports colection to install all the s/w, updated ports using "CVSup", upgraded all installed s/w using "portupgrade". -- Created a symlink ln -s /usr/local/lib/sasl /usr/lib/sasl (**) -- Is there anyone to help me out? If someone of u experienced same problems and solved somehow please help me to solve these problems. Thanks Kumaran __ Do You Yahoo!? Download the latest ringtones, games, and more! http://sg.mobile.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: texmacs and maxima [solution]
For the records: On Wed, 9 Jun 2004, Peter Ulrich Kruppa wrote: Could anybody tell me how I can make Texmacs recognize maxima? texmacs uses a bash sript /usr/local/libexec/TeXmacs/bin/maxima_detect its first line must be changed to #!/compat/linux/bin/bash Uli. +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: swap size and a zombie
On Fri, Jun 11, 2004 at 11:10:50PM -0500, Chris wrote: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > > Looking at a web/email server with the following from "top" ... > > > last pid: 29494; load averages: 0.00, 0.00, 0.00 up 85+12:33:05 23:07:44 > 39 processes: 1 running, 37 sleeping, 1 zombie > CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle > Mem: 197M Active, 545M Inact, 176M Wired, 51M Cache, 112M Buf, 33M Free > Swap: 2048M Total, 184K Used, 2048M Free > > > Does it look like the swap file is way too big? The box has been > online for awhile, yet it seems like the swap file is not utilized > very much at all. For that matter, the server is clearly overpowered > for what it does, but better than underpowered I suppose. It's only too much until you actually need to use it ;-) For example, if you have 2GB of memory then you need a 2GB swap file in order to take a kernel crash dump, if you ever run into a kernel bug. You only have ~1GB of RAM in that machine at the moment, so you might be tempted to conclude that you have 1GB too much swap, but what if you decide to add another 1GB of RAM in 6 months time? You'd have to reinstall that disk to make room. Kris P.S. Please wrap your lines at 70 characters so your emails may be easily read. pgptIkwYb4ixO.pgp Description: PGP signature
Re: Console and X configuration for laptop display
On Fri, 11 Jun 2004 21:09:13 -0500 Eric Crist <[EMAIL PROTECTED]> wrote: > On Friday 11 June 2004 18:42, you wrote: > > I installed FreeBSD 5.2.1 on a Dell Inspiron 8100. During bootup > > and later, at the command line, the usable screen is much smaller > > than the available display size -- 2 to 3 inch margins on all sides. > > Does anyone > > know how I can fix this? > > > > In X, a resolution of 1400x1050 fills the display; but everything, > > including text in documents, looks really tiny. 1024x768 is my > > favorite setting for my desktop monitor; but is rejected by X as > > being too small on the laptop display. Is there a way to make > > things look bigger while in 1400x1050? > > > > Thanks, > > > > Andrew Gould > > In some cheaper laptops, like this POS I've got, there isn't really a > way to get rid of that blank space around the edges, short of digging > into vesa and some other console options. I've made some mild > attempts to get that configured, but I figure I use X 99% of the time, > so I use a virtual console within that for most of my work. > > On some better laptops, like your Dell, iirc, there should be a key > combination, or BIOS setting to 'stretch' that resolution to fill the > screen. Usually, it is a Fn+F(1-12) combination that does it, many > times undocumented. If I remember correctly, I've gotten Dell's to > stretch their resolution with Fn+F7, but I could be wrong. Poke > around Dell's support site and see what you can find. > > HTH > > -- > Keep your pecker hard and your powder dry, and the world WILL turn. > Fn+F7 did the trick! Thanks, Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: (add new users & groups)
LW Ellis wrote: I'm not clear on the Unix group/user setup From what I have read, FreeBSD will place users in a default group Do I need a group? I will have about 6 users (not all at once) DO I add a group before users? Will it be to my benefit down the road to make a group now? Every user will be in a group-- by default, the group will have the same name as the user (his own group). You can add and modify users and groups through the pw command, the grand unified user and group management tool ("man pw" for more info). Adding a user to a group is as easy as pw groupmod -m [username] or tacking the user's name onto the end of the group in /etc/group, e.g.: wheel:*:0:root,user1,user2,... To add a group and populate it with existing members: pw groupadd [groupname] -M [user1 user2 ...] CG ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
swap size and a zombie
*This message was transferred with a trial version of CommuniGate(tm) Pro* Looking at a web/email server with the following from "top" ... last pid: 29494; load averages: 0.00, 0.00, 0.00 up 85+12:33:05 23:07:44 39 processes: 1 running, 37 sleeping, 1 zombie CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle Mem: 197M Active, 545M Inact, 176M Wired, 51M Cache, 112M Buf, 33M Free Swap: 2048M Total, 184K Used, 2048M Free Does it look like the swap file is way too big? The box has been online for awhile, yet it seems like the swap file is not utilized very much at all. For that matter, the server is clearly overpowered for what it does, but better than underpowered I suppose. Also, I cannot seem to get rid of that zombie... it happens at boot time: root 0 0.0 0.0 00 ?? ZW - 0:00.00 (perl) Thanks, Chris _ Email harvesters eat this: [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Sony AIT SDX-420 ATAPI tape drive on FreeBSD 5.2.1
I have added a Sony SDX-420 ATAPI tape drive to a FreeBSD 5.2.1-RELEASE system. The tape successfully does a dump and restore on this system but when the tape is taken to a Sony SDX-400 SCSI tape drive on a FreeBSD 4.7-RELEASE system, restore insists that the tape blocks are 512 bytes and this is not a multiple of 1024 (the tape was created with a -b 32). I have then taken the backup from the SCSI drive (where it reads) and attempted to read it on the ATAPI drive; the result looks like: monster# mt -f /dev/nast0 status Mode Density Blocksize bpi Compression Current: 0x01:X3.22-1983 512 bytes 800 0x1 -available modes- 0:default variable 0none 1:default variable 0none 2:default variable 0none 3:default variable 0none - File Number: 0 Record Number: 0Residual Count 0 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape monster# atacontrol info 1 Master: ast0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = UDMA66 <<<--- I had set this Slave = PIO4 monster# atacontrol reinit 1 Master: ast0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = PIO4 <<<--- It reverts Slave = PIO4 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape Any help gratefully received. Ray Newman 12 Jun 2004 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Sony AIT SDX-420 ATAPI tape drive on FreeBSD 5.2.1
I have added a Sony SDX-420 ATAPI tape drive to a FreeBSD 5.2.1-RELEASE system. The tape successfully does a dump and restore on this system but when the tape is taken to a Sony SDX-400 SCSI tape drive on a FreeBSD 4.7-RELEASE system, restore insists that the tape blocks are 512 bytes and this is not a multiple of 1024 (the tape was created with a -b 32). I have then taken the backup from the SCSI drive (where it reads) and attempted to read it on the ATAPI drive; the result looks like: monster# mt -f /dev/nast0 status Mode Density Blocksize bpi Compression Current: 0x01:X3.22-1983 512 bytes 800 0x1 -available modes- 0:default variable 0none 1:default variable 0none 2:default variable 0none 3:default variable 0none - File Number: 0 Record Number: 0Residual Count 0 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape monster# atacontrol info 1 Master: ast0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = UDMA66 <<<--- I had set this Slave = PIO4 monster# atacontrol reinit 1 Master: ast0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = PIO4 <<<--- It reverts Slave = PIO4 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape Any help gratefully received. Ray Newman 12 Jun 2004 Message sent at 07:28 AM on 12 Jun 2004 by PUP::RAYMOND. Id: 367835. Message sent at 01:54 PM on 12 Jun 2004 by PUP::RAYMOND. Id: 367866. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: (add new users & groups)
On Friday 11 June 2004 06:59, LW Ellis wrote: > OK, I got that part down.. > (sysinstall and adding the user) > I've ordered a FreeBSD book based on the recommendations I received here > (this list) > Until then I'm pretty much shooting in the dark, learning as I go. > > I'm not clear on the Unix group/user setup > > >From what I have read, FreeBSD will place users in a default group > > Do I need a group? I will have about 6 users (not all at once) > DO I add a group before users? > Will it be to my benefit down the road to make a group now? Groups are used for, well, grouping users. Which is kind of opaque, but true. Basically it has to do with Unix's permission scheme. When you ls -l a file you'll se something like this: -rwxrwxrwx 1 mnavarre mnavarre 4542 Dec 15 2002 yaptu.py ^^^ ^^^^^^ ^^^^^ permissions ownergroup size date fname Notice the permissions repeat the rwx sequence three times, they stand for read, write and execute, each set of letters controls access to the file for a diffetent class of users, user group or other. these are considered in that order, i.e. if a user tries to write a file first the owner permissions are considered, if they allow writing the file is written and we don't look at the other permissions, if not we move on to the group permissions if the user belongs to the group and there is group write permission file is written, we stop, etc., if not we move on to the other permissions, this encompases all users who didn't fall into the first two classes. Keep in mind that many people can belong to one group, that's what they're for. You can have a group for a project and put all the users involved in that project in a group and use the group permissions to control access to those files. What most people do is make a group for each user that only they belong to and have that be their main group. users can then be added to other groups, and new groups can be added as need arises. This is kind of brief, and maybe not that helpful, but it's a start. You'll also want to read the chmod(1) man page and the Handbook sections on permissions: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/permissions.html And on Users and account magement: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/users.html It might take a bit to get your head around, but you will. > > I can't thank you and everyone else that has helped, enough. > I know newbys can be a pain. > Leon OK, Matt -- "We all enter this world in the same way: naked, screaming, and soaked in blood. But if you live your life right, that kind of thing doesn't have to stop there." -- Dana Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: native xpdf vs static xpdf for linux (couldn't create a font for...)
On Fri, Jun 11, 2004 at 11:08:46PM +0300, Paulius Bulotas wrote: > Hello, > > I would like to use native xpdf (compiled from ports) for viewing pdf > files, but it's almost impossible,, since for many pdf's it can't find > used fonts and of course doesn't show any text. > The question would be, why? ;) > BTW, statically linked xpdf for linux which I downloaded from foolabs.com > (ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.00-linux.tar.gz) shows everything. You need to install ghostscript fonts for it to display properly. Easiest way to do this is to install print/ghostscript. I've asked the xpdf maintainer to put in a note about this, but it's been ignored... Cheers. -- Jonathan Chen <[EMAIL PROTECTED]> -- When all else fails, RTFM ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: (add new users & groups)
Rob wrote: Every 'thing' in Unix should be a "user" and belong to a "group". replace "should be" by "should be owned by". ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: (add new users & groups)
LW Ellis wrote: OK, I got that part down.. (sysinstall and adding the user) I've ordered a FreeBSD book based on the recommendations I received here (this list) Until then I'm pretty much shooting in the dark, learning as I go. I'm not clear on the Unix group/user setup From what I have read, FreeBSD will place users in a default group Do I need a group? I will have about 6 users (not all at once) DO I add a group before users? Will it be to my benefit down the road to make a group now? Every 'thing' in Unix should be a "user" and belong to a "group". These are basically numbers: user-ID and group-ID. So everytime you add a user to the system, that user will also get a group-ID. On my system I am user "1001", and in group "1005". The files /etc/passwd and /etc/group map these numbers to nice names. On my system these numbers map to the user-group names "lahaye" and "surfion", for example. These user-IDs and group-IDs are the essential part of permissions in Unix. Permissions that (dis)allow a user to view or execute files; to browse directries etc. etc. Do an "ls -l" and you see to which user/group the files and directories belong. E.g: $ ls -l .xsession -rwxr-xr-x 1 lahaye surfion 613 Apr 10 19:58 .xsession (As an aside, sometimes, by mistake, files or directories have a user or group ID that is not listed in /etc/passwd and/or /etc/group; in that case the system cannot do the mapping to nice names, and you get the bare numbers!). The user/group concept clarify who can access what. For example, there is you, your family members, and the big world outside. Say you add yourself as user=leon, group=ellis Then add your brother, father etc. as user=john, group=ellis user=dad, group=ellis When you create a file, you then decide who can access this file. 1) Only you (none of the family members, neither the outside world) 2) You and all family members 3) Everybody (you, family and everybody else) To make things a little more complicated: you can specify this separately for 'reading', 'writing', and 'executing'. See the "chmod" command for details. This is a starting point for learning more on the basics of Unix and its files/directories permission strategy. Happy Unixing, Rob. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
XFree86 Config SOLVED
THanx everybody!! After I did a clean install Got Xserver setup, KDE setup THen I added a user, No problems Couldn't have done it with out you!!! Later, Leon A fanatic is one who can't change his mind and won't change the subject. Sir Winston Churchill ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
(add new users & groups)
OK, I got that part down.. (sysinstall and adding the user) I've ordered a FreeBSD book based on the recommendations I received here (this list) Until then I'm pretty much shooting in the dark, learning as I go. I'm not clear on the Unix group/user setup >From what I have read, FreeBSD will place users in a default group Do I need a group? I will have about 6 users (not all at once) DO I add a group before users? Will it be to my benefit down the road to make a group now? I can't thank you and everyone else that has helped, enough. I know newbys can be a pain. Leon - Original Message - From: "Rob" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 11, 2004 7:48 PM Subject: Re: New Question (add new users & groups) > LW Ellis wrote: > > The depth of my unix ignorance is showing... > > I kept getting a glitch, probably from my bad install attempt. > > "New Question" is not a useful subject of your email. > Formulate your question in a few words as a subject. > That makes it easier for others to browse through the long list > of emails in the mailinglist and pick those that are of interest. > > > I wiped my HD and re-installed FreeBSD with what I have learned. > > I have configured my xserver and it seems to be working ok. > > I read the the FreeBSD Handbook and found little about adding users or > > groups. > > 1) Do I add a group before a user? > > 2) Other than sysinstall to add a user, is there anything else I need to do > > to configure a regular (notsuperuser) > > (Keeping in mind to copy .xsession and .xinitrc to that user's dir.) > > In this case, and in this stage of your experience, I would recommend to you > to use /stand/sysinstall. > In an xterminal, become root and do: > > # cd /stand > # ./sysinstall > > This will give you the configuration dialog, that you may remember from when > you did the installation. But this time you choose the option: > "Configure Do post-install configuration of FreeBSD" > > In the next dialog, you get lots menu items. Some of them are a little dangerous > (e.g. disk management), but you also see here "User Management". > Go there and add a group and new user; this dialog explains itself, I suppose. > > When finished, simply select "Cancel" and "X Exit Install" and you're done. > > Would that work? > > Rob. > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: New Question
> > The depth of my unix ignorance is showing... > I kept getting a glitch, probably from my bad install attempt. > I wiped my HD and re-installed FreeBSD with what I have learned. > I have configured my xserver and it seems to be working ok. > I read the the FreeBSD Handbook and found little about adding users or > groups. > 1) Do I add a group before a user? Yes. Probably to the appropriate group before you add a user whose primary group will be that one. You can, but you do not need to make a separate group for each user. You may want to use the group ID to make categories of users who can work together, for example. You can create a group just by editing the /etc/group file. Copy one of the existing group lines and edit it with a different name and number. You can use regular vi(1) for editing the group file. Don't use any numbers below 100, and I suggest starting at with 200 or even 1000 as a good round number. Give you some room to play after you get big ideas about some project - and you are sure to do so if you stick around long enough. > 2) Other than sysinstall to add a user, is there anything else I need to do > to configure a regular (notsuperuser) > (Keeping in mind to copy .xsession and .xinitrc to that user's dir.) There are various utilities to add users. adduser(8) is probably the best known. Or you can just use vipw to edit the /etc/passwd and /etc/master.passwd files directly and then create the correct home directory and such by hand if you really want to get the feel of UNIX. Do not edit either /etc/passwd or /etc/master.passwd with any other editing tool. vipw makes sure locks are handled and that the database is properly updated. Also, as with groups, do not use any UID numbers below 100 and starting at at least 200 or 1000 is a good idea. UIDs and GIDs below 100 are reserved for various standard usages. jerry > > Thanx in advance! > > Later, > Leon > A fanatic is one who can't change his mind and won't change the subject. > Sir Winston Churchill > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 3WARE: Drive sector ECC error corrected
On Fri, 11 Jun 2004 02:46:09 -0700, in sentex.lists.freebsd.questions you wrote: >I'm currently running 3ware 8506-12 cards on freebsd 4.9 using the built in >twe driver. Today (and previously) I've run into a situation where a volume >stops responding to any read or write requests. >Here is the AEN log: Strange, we get the odd problem like that we some maxtor drives, but the unit recovers and all continues. If you update to RELENG_4 or 4.10 there are some newer drivers. Not sure if it would help or not. Perhaps open a support case on the 3ware web site. I have found them quite helpful in the past. ---Mike > > >.18:44:28 Sat >29-May-2004Drive sector ECC error corrected on port 7 on controller >ID:0. (0x23) > > > >Here is my dmesg: > >Copyright (c) 1992-2003 The FreeBSD Project. > >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >The Regents of the University of California. All rights reserved. > >FreeBSD 4.9-RELEASE-p2 #4: Thu Feb 5 14:24:16 GMT 2004 > >[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP-GLOBAT > >Timecounter "i8254" frequency 1193182 Hz > >CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2790.72-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 > > >Features=0xbfebfbff,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Hyperthreading: 2 logical CPUs > >real memory = 2146959360 (2096640K bytes) > >avail memory = 2086326272 (2037428K bytes) > >Programming 24 pins in IOAPIC #0 > >IOAPIC #0 intpin 2 -> irq 0 > >Programming 24 pins in IOAPIC #1 > >Programming 24 pins in IOAPIC #2 > >FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs > > cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee0 > > cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee0 > > cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee0 > > cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee0 > > io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec0 > > io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec8 > > io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 > >Preloaded elf kernel "kernel" at 0xc04b8000. > >Warning: Pentium 4 CPU: PSE disabled > >Pentium Pro MTRR support enabled > >md0: Malloc disk > >Using $PIR table, 20 entries at 0xc00fde80 > >npx0: on motherboard > >npx0: INT 16 interface > >pcib0: on motherboard > >pci0: on pcib0 > >pci0: (vendor=0x8086, dev=0x2541) at 0.1 > >pcib1: at device 2.0 on pci0 > >pci1: on pcib1 > >pci1: (vendor=0x8086, dev=0x1461) at 28.0 > >pcib2: at device 29.0 on pci1 > >IOAPIC #1 intpin 4 -> irq 2 > >pci2: on pcib2 > >twe0: <3ware Storage Controller> port 0x7000-0x700f mem >0xfc80-0xfcff,0xfc20-0xfc2f irq 2 at device 2.0 on pci2 > >twe0: 12 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048 > >pci1: (vendor=0x8086, dev=0x1461) at 30.0 > >pcib3: at device 31.0 on pci1 > >pci3: on pcib3 > >pci0: (vendor=0x8086, dev=0x2544) at 2.1 > >pcib4: at device 30.0 on pci0 > >IOAPIC #0 intpin 21 -> irq 5 > >IOAPIC #0 intpin 20 -> irq 10 > >IOAPIC #0 intpin 23 -> irq 11 > >pci4: on pcib4 > >pci4: at 3.0 irq 5 > >fxp0: port 0x8400-0x843f mem >0xfe00-0xfe01,0xfe041000-0xfe041fff irq 10 at device 4.0 on pci4 > >fxp0: Ethernet address 00:02:b3:e9:0d:28 > >inphy0: on miibus0 > >inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >em0: port >0x8440-0x847f mem 0xfe02-0xfe03 irq 11 at device 5.0 on pci4 > >em0: Speed:N/A Duplex:N/A > >isab0: at device 31.0 on pci0 > >isa0: on isab0 > >atapci0: port >0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 > >ata0: at 0x1f0 irq 14 on atapci0 > >ata1: at 0x170 irq 15 on atapci0 > >pci0: (vendor=0x8086, dev=0x2483) at 31.3 irq 0 > >orm0: at iomem 0xc-0xc7fff,0xc8000-0xc97ff,0xe3000-0xe3fff >on isa0 > >pmtimer0 on isa0 > >fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > >fdc0: FIFO enabled, 8 bytes threshold > >atkbdc0: at port 0x60,0x64 on isa0 > >atkbd0: irq 1 on atkbdc0 > >kbd0 at atkbd0 > >vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 > >sc0: at flags 0x100 on isa0 > >sc0: VGA <16 virtual consoles, flags=0x100> > >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > >sio0: type 16550A, console > >sio1 at port 0x2f8-0x2ff irq 3 on isa0 > >sio1: type 16550A > >ppc0: at port 0x378-0x37f irq 7 on isa0 > >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > >ppc0: FIFO with 16/16/9 bytes threshold > >lpt0: on ppbus0 > >lpt0: Interrupt-driven port > >ppi0: on ppbus0 > >APIC_IO: Testing 8254 interrupt delivery > >APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > >SMP: AP CPU #1 Launched! > >SMP: AP CPU #2 Launched! > >SMP: AP CPU #3 Launched! > >ad2: 39205MB [79656/16/63] at ata1-master UDMA100 > >acd0: CDROM at ata0-master PIO4 > >twed0: on twe0 > >twed0: 354550MB (726120320 sectors) > >twed1: on twe0 > >twed1: 763124MB (1562879488 sectors) > >twe0: command interrupt > >Mounting root from ufs:/dev/ad2s1a > > _
Re: New Question (add new users & groups)
LW Ellis wrote: The depth of my unix ignorance is showing... I kept getting a glitch, probably from my bad install attempt. "New Question" is not a useful subject of your email. Formulate your question in a few words as a subject. That makes it easier for others to browse through the long list of emails in the mailinglist and pick those that are of interest. I wiped my HD and re-installed FreeBSD with what I have learned. I have configured my xserver and it seems to be working ok. I read the the FreeBSD Handbook and found little about adding users or groups. 1) Do I add a group before a user? 2) Other than sysinstall to add a user, is there anything else I need to do to configure a regular (notsuperuser) (Keeping in mind to copy .xsession and .xinitrc to that user's dir.) In this case, and in this stage of your experience, I would recommend to you to use /stand/sysinstall. In an xterminal, become root and do: # cd /stand # ./sysinstall This will give you the configuration dialog, that you may remember from when you did the installation. But this time you choose the option: "Configure Do post-install configuration of FreeBSD" In the next dialog, you get lots menu items. Some of them are a little dangerous (e.g. disk management), but you also see here "User Management". Go there and add a group and new user; this dialog explains itself, I suppose. When finished, simply select "Cancel" and "X Exit Install" and you're done. Would that work? Rob. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem with samba - windows clients reboot when saving.
This behavior could be caused by a virus/ trojan or worm. Sasser will reboot windowz boxes. Get some AV software update it and scan your system. If you only see this when your attempting to save files to the samba server try shutting down application in an attempt to locate the bad process. You might want to check the event log and check with the samba peeps and windows geeks. Also upgrade to samba 3 Latez - Original Message - From: "admin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 11, 2004 10:55 AM Subject: Problem with samba - windows clients reboot when saving. > hello: > > Freebsd 4.9 > Recent install world and kernel after cvsup > Samba 2.2.8a > > The clients have files in their home directories and on a common share on > the BSD box. > Every so often when they make a change to a file and save it the client > machine reboots. > Clients run win98 and office XP with SP2. > > error for the log.smbd: > smbd version 2.2.8a started. > Copyright Andrew Tridgell and the Samba Team 1992-2002 > [2003/10/15 08:04:55, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:17:43, 0] lib/util_sock.c:read_socket_with_timeout(300) > read_socket_with_timeout: timeout read. read error = Connection reset by > peer. > [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(794) > oplock_break: receive_smb error (Connection reset by peer) > oplock_break failed for file HONDE OORLASTE.doc (dev = 27406, inode = > 2861321, file_id = 3). > [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(879) > oplock_break: client failure in break - shutting down this smbd. > [2003/10/15 08:18:11, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:18:15, 0] smbd/oplock.c:request_oplock_break(1011) > request_oplock_break: no response received to oplock break request to pid > 934 on port 1127 for dev = 27406, inode = 2861321, file_id = 3 > [2003/10/15 08:20:21, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:38:18, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:42:08, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:49:09, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > > There have been a lot more reboots that don't appear in the log - don't know > why. > > smb.conf : > # Global parameters > [global] > workgroup = MATZIKAMA > netbios name = BSD1 > encrypt passwords = Yes > unix password sync = Yes > preferred master = Yes > domain master = Yes > admin users = %S > create mask = 0777 > directory mask = 0777 > > [homes] > valid users = %S > read only = No > browseable = No > > [shared] > path = /usr/home/shared > read only = No > guest ok = Yes > vfs object = /usr/local/lib/samba/recycle.so > vfs options = /usr/local/etc/recycle.conf.default > > [printers] > path = /var/spool/samba > guest ok = Yes > printable = Yes > browseable = No > [hp5000] > comment = Hp 5000 at Amanda > path = /var/spool/lpd/hp5000 > read only = No > guest ok = Yes > printable = Yes > printer name = hp5000 > oplocks = No > . and six more printers identical to this one. > > The problem appeared about 2 months after i upgraded to 2.2.8a > > I have set the permissions on the users files to 777 and checked ownership > just to be sure. Still does the same. > I'm not sure if the problem lies on samba office xp or win98. All antivirus > software on the clients have been disabled. > > Any help is needed urgently. > Thanks in advance leon. > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DNS + DHCP auto host updates.
Here you go. Here is an example of a dhcpd.conf entry subnet 4.10.10.0 netmask 255.255.252.0 { dynamic-dhcp range 4.10.10.2 4.10.13.254 { option subnet-mask 255.255.252.0; option domain-name "dsl-verizon.net"; option domain-name-servers 4.2.2.4,4.2.2.5,4.2.2.6; option routers 4.10.10.1; option dhcp-lease-time 14400; option dhcp-renewal-time 7200; option dhcp-rebinding-time 12600; } } - Original Message - From: "Ben Timby" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 11, 2004 12:02 PM Subject: DNS + DHCP auto host updates. > Hello, does anyone have a good guide for setting up DNS updates using > ISC DHCP server? I want hosts on my network to become registered with > DNS server when they recieve network configuration. I have not been able > to find a guide or more information than what is in the man pages for > dhcpd and bind. Any help is appreciated. Please reply to the list. > > Thanks. > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
New Question
The depth of my unix ignorance is showing... I kept getting a glitch, probably from my bad install attempt. I wiped my HD and re-installed FreeBSD with what I have learned. I have configured my xserver and it seems to be working ok. I read the the FreeBSD Handbook and found little about adding users or groups. 1) Do I add a group before a user? 2) Other than sysinstall to add a user, is there anything else I need to do to configure a regular (notsuperuser) (Keeping in mind to copy .xsession and .xinitrc to that user's dir.) Thanx in advance! Later, Leon A fanatic is one who can't change his mind and won't change the subject. Sir Winston Churchill ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: native xpdf vs static xpdf for linux (couldn't create a font for...)
On Fri, 11 Jun 2004 23:08:46 +0300 Paulius Bulotas <[EMAIL PROTECTED]> wrote: > Hello, > > I would like to use native xpdf (compiled from ports) for viewing pdf > files, but it's almost impossible,, since for many pdf's it can't find > used fonts and of course doesn't show any text. > The question would be, why? ;) > BTW, statically linked xpdf for linux which I downloaded from foolabs.com > (ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.00-linux.tar.gz) shows everything. > > Everything looks like: > $ xpdf ~/sample.pdf > Error: Couldn't create a font for 'BA+TimesNewRomanPSMT' > $ ~/tmp/xpdf-3.00-linux/xpdf ~/sample.pdf > $ > > I've put this pdf (generated with StarOffice) at: > http://devnull.lt/files/sample.pdf > > $ ldd `which xpdf` > /usr/X11R6/bin/xpdf: >libt1.so.5 => /usr/local/lib/libt1.so.5 (0x28123000) >libfreetype.so.9 => /usr/local/lib/libfreetype.so.9 (0x28173000) >libXm.so.3 => /usr/X11R6/lib/libXm.so.3 (0x281df000) >libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x28429000) >libXp.so.6 => /usr/X11R6/lib/libXp.so.6 (0x2847a000) >libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x28482000) >libXpm.so.4 => /usr/X11R6/lib/libXpm.so.4 (0x28491000) >libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x284a) >libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x284a9000) >libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x284c) >libstdc++.so.4 => /usr/lib/libstdc++.so.4 (0x28588000) >libm.so.2 => /lib/libm.so.2 (0x28644000) >libc.so.5 => /lib/libc.so.5 (0x2865d000) >libz.so.2 => /lib/libz.so.2 (0x2873e000) >libXau.so.0 => /usr/X11R6/lib/libXau.so.0 (0x2874c000) > > I'm running 5.2-CURRENT, if this means something ;) > > TIA > Paulius > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > What is your /usr/X11R6/etc/xpdfrc like ? It seems a lot of lines necessary for font handling are commented out in default install. horio shoichi ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
IMAP server (was Re: Version query for a new machine)
Louis LeBlanc <[EMAIL PROTECTED]> wrote: > Now to decide whether to change my IMAP server. Any recommendations? > > I'm using Cyrus now, but I suspect it may be paramount to using a > shotgun to kill a gnat. I have like 3 users, and each one has a login > anyway (to accomodate Samba shares). I definitely want to keep IMAP, > but adding POP3 will depend entirely on the associated pain factor. Have you looked at dovecot? I've been very happy with it for small installations. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Version query for a new machine
On 06/11/04 08:18 PM, Bill Moran sat at the `puter and typed: > Louis LeBlanc <[EMAIL PROTECTED]> wrote: > > > > I know nobody is going to "guarantee" their answer to this one, but is > > RELENG_5_2 reliable enough for a moderately loaded system? If it is, > > are the gains worth the supposedly lower stability? Would I even > > notice this, going from a 400Mhz to a 3.0Ghz? > > I think you'd be happier with 5 at this point. Not -CURRENT, but the latest > 5.2.1. > > You are going to have a few problems, depending on what you're doing. For > example, I wanted to do C# development on FreeBSD, and was majorly bummed to > find that mono doesn't work on 5 ... seems to work OK on 4. > > So you might just want to peruse the ports you want searching for BROKEN= > messages that refer to 5.x before taking that route. > > I believe the upgrade path from 4 to 5 is more or less a reinstall at this > point ... but wiser folk may correct me on this if I'm wrong. > > I ran 5 for quite a while on my 1G desktop machine, and the only frustration > I had was being unable to use mono. Then my HDD went up in smoke, and when > I reinstalled, I put 4 on so I could do C# work ... then (following the > rules of Murphy) I got tied up in other things, and haven't done a damn thing > with C# yet ... Isn't that always the way? Just when I get my best ideas, I get moved to another project . . . > Anyway, 5 seemed (in my opinion) to perform just as well as 4 for a desktop > system, so I wouldn't worry about that at all. Thank you so much. You've certainly alleviated my stability concerns, and I'll certainly be glad not to have to go offline a couple days for the 4.x to 5.x upgrade (I'd just wind up putting it off to the point of foolishness). I'm not so concerned about C# right now, so I think 5.2.1 will probably be it. And I'll certainly scour the ports to verify the ones I *do* want. Thanks again! Now to decide whether to change my IMAP server. Any recommendations? I'm using Cyrus now, but I suspect it may be paramount to using a shotgun to kill a gnat. I have like 3 users, and each one has a login anyway (to accomodate Samba shares). I definitely want to keep IMAP, but adding POP3 will depend entirely on the associated pain factor. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ weapon, n.: An index of the lack of development of a culture. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Version query for a new machine
Louis LeBlanc <[EMAIL PROTECTED]> wrote: > Hey everyone. After my CPU fan (or was it the hard drive?) spent a > day or two screeching constantly at high frequencies (and volume), I > finally broke down and ordered a new PC. The problem is what to > install on it. > > The new system is a Dell Dimension 8300, w/P4 @ 3.0 Ghz, HT etc. The > video card is a 128M NVidia GeForce, and I want to make sure the sound > works, which should be easy enough (SB Live! 5.1). It's gonna be > strange after working for years on the same systems at 400-450 Mhz! > > The real decision isn't whether to install FreeBSD (it *will* be > FreeBSD dedicated), but which version? > > I want it to be reasonably stable, so CURRENT is probably out. I'm > running RELENG_4_10 now, which I like just fine, but I'm not sure if > this will take advantage of the HT tech in the processor. > /usr/src/UPDATING has the following on the subject: > >Support for HyperThread logical CPUs has now been enabled by >default. As a result, the HTT kernel option no longer exists. >Instead, the logical CPUs are always started so that they can >handle interrupts. However, the extra logical CPUs are prevented >from executing user processes by default. To enable the logical >CPUs, change the value of the machdep.hlt_logical_cpus from 1 to >0. This value can also be set from the loader as a tunable of >the same name. > > I'm not an SMP guru (or even a novice) but that sounds like it will > take full advantage if I simply make the specified sysctrl > configuration change (finding the sysctrl documentation is tricky > enough in itself). > > I know nobody is going to "guarantee" their answer to this one, but is > RELENG_5_2 reliable enough for a moderately loaded system? If it is, > are the gains worth the supposedly lower stability? Would I even > notice this, going from a 400Mhz to a 3.0Ghz? I think you'd be happier with 5 at this point. Not -CURRENT, but the latest 5.2.1. You are going to have a few problems, depending on what you're doing. For example, I wanted to do C# development on FreeBSD, and was majorly bummed to find that mono doesn't work on 5 ... seems to work OK on 4. So you might just want to peruse the ports you want searching for BROKEN= messages that refer to 5.x before taking that route. I believe the upgrade path from 4 to 5 is more or less a reinstall at this point ... but wiser folk may correct me on this if I'm wrong. I ran 5 for quite a while on my 1G desktop machine, and the only frustration I had was being unable to use mono. Then my HDD went up in smoke, and when I reinstalled, I put 4 on so I could do C# work ... then (following the rules of Murphy) I got tied up in other things, and haven't done a damn thing with C# yet ... Anyway, 5 seemed (in my opinion) to perform just as well as 4 for a desktop system, so I wouldn't worry about that at all. > I don't put much load on except when upgrading ports, munging photos, > etc, but I plan to do some Perl, C/C++ and Java/Tomcat/webapp > development on it in the near future, and I'd like to finally be able > to compile OpenOffice.org. I may also take it for a test drive with a > game or two (particularly if I get wine working), which might push the > envelope a bit. > > If 4.10 is the best route for now, what kind of pain factor will the > upgrade to 5.x be when the time comes? I typically keep over 300 > ports installed, so I expect that alone will be kinda ugly to work > with (See the corrolary to Murphy at the bottom). > > Since I haven't got the system yet (about 10 days out), I'd like to > have an idea where to start *before* I get it - once I do, it will be > too late to plan, because I'll probably just stop thinking objectively > until I have it up and running. Hence the need for a plan beforehand > :) -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DNS + DHCP auto host updates.
On 06/11/04 11:02 AM, Ben Timby sat at the `puter and typed: > Hello, does anyone have a good guide for setting up DNS updates using > ISC DHCP server? I want hosts on my network to become registered with > DNS server when they recieve network configuration. I have not been able > to find a guide or more information than what is in the man pages for > dhcpd and bind. Any help is appreciated. Please reply to the list. While searching the mailing list archives for a completely unrelated question, I found this link in someones sig: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ There is a link to a tutorial for exactly that task. One of the better links I've found on it, anyway. I'll be doing this myself in a few weeks, so I'd appreciate if you'd post back to the list (in this thread if you like) any gotchas (or lack thereof) you encounter. Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ COBOL: Completely Over and Beyond reason Or Logic. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Version query for a new machine
Hey everyone. After my CPU fan (or was it the hard drive?) spent a day or two screeching constantly at high frequencies (and volume), I finally broke down and ordered a new PC. The problem is what to install on it. The new system is a Dell Dimension 8300, w/P4 @ 3.0 Ghz, HT etc. The video card is a 128M NVidia GeForce, and I want to make sure the sound works, which should be easy enough (SB Live! 5.1). It's gonna be strange after working for years on the same systems at 400-450 Mhz! The real decision isn't whether to install FreeBSD (it *will* be FreeBSD dedicated), but which version? I want it to be reasonably stable, so CURRENT is probably out. I'm running RELENG_4_10 now, which I like just fine, but I'm not sure if this will take advantage of the HT tech in the processor. /usr/src/UPDATING has the following on the subject: Support for HyperThread logical CPUs has now been enabled by default. As a result, the HTT kernel option no longer exists. Instead, the logical CPUs are always started so that they can handle interrupts. However, the extra logical CPUs are prevented from executing user processes by default. To enable the logical CPUs, change the value of the machdep.hlt_logical_cpus from 1 to 0. This value can also be set from the loader as a tunable of the same name. I'm not an SMP guru (or even a novice) but that sounds like it will take full advantage if I simply make the specified sysctrl configuration change (finding the sysctrl documentation is tricky enough in itself). I know nobody is going to "guarantee" their answer to this one, but is RELENG_5_2 reliable enough for a moderately loaded system? If it is, are the gains worth the supposedly lower stability? Would I even notice this, going from a 400Mhz to a 3.0Ghz? I don't put much load on except when upgrading ports, munging photos, etc, but I plan to do some Perl, C/C++ and Java/Tomcat/webapp development on it in the near future, and I'd like to finally be able to compile OpenOffice.org. I may also take it for a test drive with a game or two (particularly if I get wine working), which might push the envelope a bit. If 4.10 is the best route for now, what kind of pain factor will the upgrade to 5.x be when the time comes? I typically keep over 300 ports installed, so I expect that alone will be kinda ugly to work with (See the corrolary to Murphy at the bottom). Since I haven't got the system yet (about 10 days out), I'd like to have an idea where to start *before* I get it - once I do, it will be too late to plan, because I'll probably just stop thinking objectively until I have it up and running. Hence the need for a plan beforehand :) Thanks in advance Lou -- Louis LeBlanc [EMAIL PROTECTED] Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ԿԬ Interchangeable parts won't. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Platforms, OSes,etc.
"reddevil69" <[EMAIL PROTECTED]> wrote: > Hi there. I have a question or two if you folks don't mind. I would like to > migrate to a better, more stable OS for surfing, making music and data cd's as > well as dvd's, and importing images ( vhs and photo) to cd/dvd. As far as > I'm concerned, the only thing that Windows is good for is my games, probably > because I'm tired of all the bs (crashes,bugs, holes etc.). I have a Gigabyte > GA-7VM400M motherboard with an Athelon XP 2400+ (Thorton). My question then is > this, What platform do I have (i386, pc98 ? ) i386. > and what OS would you recommend for my purposes ( FreeBSD, Red Hat, SUSE?) FreeBSD. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Using scanner with FreeBSD. A nightmare!
On Friday 11 June 2004 00:53, Guillermo García-Rojas wrote: > Same problem I had last month. > > What I did? > > I comment out the line: > > device uscanner > > on my kernel and installed libUSB. > > My Scanner worked for 2 or 3 times and now it doesn't work anymore. > > I have FreeBSD 4.10-STABLE > Scanner: USB Generic Flatbed Scanner Is it completely dead now? What is it's vendor and product ID, what says 'usbdevs -v'? Is it listed in /usr/src/sys/dev/usb/uscanner.c and usbdevs? regards ch -- Christian Hiris <[EMAIL PROTECTED]> | OpenPGP KeyID 0x941B6B0B OpenPGP-Key at hkp://wwwkeys.eu.pgp.net and http://pgp.mit.edu pgp3jq7DuHixs.pgp Description: signature
Re: Using scanner with FreeBSD. A nightmare!
On Friday 11 June 2004 05:24, Rob wrote: >> crw-rw 1 root operator 243, 255 Jun 6 14:10 usb >> crw-rw-rw- 1 root operator 243, 0 Jun 6 14:10 usb0 >> crw-rw-rw- 1 root operator 243, 1 Jun 6 14:10 usb1 >> crw-rw 1 root operator 243, 2 Jun 6 14:10 usb2 >> crw-rw 1 root operator 243, 3 Jun 6 14:10 usb3 >> crw-rw-rw- 1 root operator 242, 0 Jun 10 19:31 uscanner0 > > What role does /dev/usb play in this story? It plays no special role in our story. Afaik it's used by usbd for reading device attachment/detachment events. I didn't snipped it when I pasted the ls command output :-) regards ch -- Christian Hiris <[EMAIL PROTECTED]> | OpenPGP KeyID 0x941B6B0B OpenPGP-Key at hkp://wwwkeys.eu.pgp.net and http://pgp.mit.edu pgpHU6hixu9et.pgp Description: signature
Platforms, OSes,etc.
Hi there. I have a question or two if you folks don't mind. I would like to migrate to a better, more stable OS for surfing, making music and data cd's as well as dvd's, and importing images ( vhs and photo) to cd/dvd. As far as I'm concerned, the only thing that Windows is good for is my games, probably because I'm tired of all the bs (crashes,bugs, holes etc.). I have a Gigabyte GA-7VM400M motherboard with an Athelon XP 2400+ (Thorton). My question then is this, What platform do I have (i386, pc98 ? ), and what OS would you recommend for my purposes ( FreeBSD, Red Hat, SUSE?) irregardless of brand names, and multi-boot setups are not a problem. Please respond in non-geek english, and thank you very much for your assistance.. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Console and X configuration for laptop display
I installed FreeBSD 5.2.1 on a Dell Inspiron 8100. During bootup and later, at the command line, the usable screen is much smaller than the available display size -- 2 to 3 inch margins on all sides. Does anyone know how I can fix this? In X, a resolution of 1400x1050 fills the display; but everything, including text in documents, looks really tiny. 1024x768 is my favorite setting for my desktop monitor; but is rejected by X as being too small on the laptop display. Is there a way to make things look bigger while in 1400x1050? Thanks, Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HTTPtunnel hangs with proxy
My suggestion would be to use tcpdump to examine the data flow. Watch what your browser sends to the http proxy, and then watch what htc sends to it. Probably will be different. Obviously htc thinks it is talking directly to hts, and thus is not speaking proper "http proxy" protocol. While I know some about how this works, I don't know alot. My guess is that httptunnel is not compatible with an proxies, unless the manpage or other documentation says otherwise, and provides a switch to modify the way it interacts with what it *thinks* is the hts (but is really an http proxy). Hope this is helpful in a general/vague sort of way :-). Robert Eckardt wrote: Hello, has someone got an idea, what I'm doing wrong? I'm trying to get httptunnel to work via a proxy. I have observed the following behaviour under FBSD-4.5R as well as under 5.2.1R, with apache-2.0.48_1 as well as with apache-1.3.22_7 and with httptunnel-3.3 as well as with httptunnel-3.0.5. Finally, I reduced it to the following setting: (I tried different options for proxy-buffer size und -timeout without any effect): telnet 127.0.0.1 2023 | htc -F 2023 -P 127.0.0.1:80 127.0.0.1:8080 || httpd (as the proxy and at least my Netscape is happy) || hts -F 127.0.0.1:23 8080 | telnetd After the connect to htc I get no further reaction from telnet. I can send a CR to htc, where it simply sits around. All connections are in state ESTABLISHED, only the one to telnetd does not exist at that time. htc waits in a read for reply from the proxy, while hts at the same time also waits for data from the proxy on the first of two connections. The proxy has two connections open to either htc and hts, but in the Log of hts there is only the first of them noted. (htc sent a POST and a GET and waits now for the reply to the GET. The proxy, however, sent the GET to hts on the second connection, whereas hts waits in a read in the first one.) Only after killing htc the proxy sends its data to hts, which then in turn opens the connection to telnetd and (after stopping hts) closes it again. Has someone out there successfully got such a setting (httptunnel via a proxy) working? How do I get httptunnel to get the proxy to forward the data (POST-request) immediately? Does anyone now of an alternative to httptunnel? (I tried htun-0.9.5 but gave up as it's too hard Linux-style.) Unneccessary to note, but without proxy the connection works fine. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 Config (continued)
> > On Friday 11 June 2004 20:36, LW Ellis wrote: > > OK thanx to all the help, I think I'm getting close. > > I have a config file that works fineonly as long as I am signed in as > > root. > > KDE-Lite loads and works fine... > > However > > If I sign in as a user, I get a grey-green screen with some white windows. > > I put the config file in etc/X11/XF86Config. > > There maybe other copies somewhere, but I think I got most of them. > > Do I have the config file in the right place? > > Copy the file '.xinitrc' from root's home directory to the respective user's > home directory. > This is because every user can have his own desktop, so every user will have > to specify one in order not to get the default one. It's also possible to set > a system-wide default, but I've never done this. To make it a system-wide default which can be overridden by each user, put a copy of the .xinitrc mentioned above in; /usr/X11R6/lib/X11/xinit/ but leave off the leading dot '.' Anyway, if you put it in the above directory, it is the default if the user doesn't make their own. If they make their own and put it in their home directory, their own overrides the default. Something like that anyway. I think you can also put the default in etc/X11/ but I am not sure about that. jerry > > Daniela > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 4-10 install, RAM parity errors that don't seem to happen in Linux.
I am trying to move as much of our servers as I can to FreeBSD, and there's a few boxes that they have here that the RAM is a about 2 mm high and requires the case (1U machines) to press on the RAM when closed. These machines run RH Linux for months without a problem, yet 3 out of 4 I just pulled are giving RAM parity problems during FreeBSD instalation. Does FreeBSD not allow/recover from those types of errors the same way Linux does? Any solutions? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thanks!
Hi Bill, I was pleasantly supprised with the ease of install. There were a couple of suprises, but nothing large. A few small things you might be able to answer. the order of install for the following:L Apache13 mod_ssl mod_php mod_frontpage When I ran mod php, it built and installed apache13 in the user/local/etc/apache dir. How does one now add the Frontpage and SSL mods? I have read the READMEs and INSTALLs and they are as clear as mud! Any hints would be appreciated! -Grant ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 Config (continued)
On Friday 11 June 2004 20:36, LW Ellis wrote: > OK thanx to all the help, I think I'm getting close. > I have a config file that works fineonly as long as I am signed in as > root. > KDE-Lite loads and works fine... > However > If I sign in as a user, I get a grey-green screen with some white windows. > I put the config file in etc/X11/XF86Config. > There maybe other copies somewhere, but I think I got most of them. > Do I have the config file in the right place? Copy the file '.xinitrc' from root's home directory to the respective user's home directory. This is because every user can have his own desktop, so every user will have to specify one in order not to get the default one. It's also possible to set a system-wide default, but I've never done this. Daniela ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 Config (continued)
OK I copied the .xsession to /home/'username' directory. I still get the greygreen screen with white windows. I looked in the .xsession file and all it says it startkde. If I enter startkde, it tells me in can't start xserver. Leon > > > In ~root look for .xsession or .xstart > > They're text files--just make sure you have one of those in your user's > homedir... > > G. > > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
XFree86 Config (continued)
OK thanx to all the help, I think I'm getting close. I have a config file that works fineonly as long as I am signed in as root. KDE-Lite loads and works fine... However If I sign in as a user, I get a grey-green screen with some white windows. I put the config file in etc/X11/XF86Config. There maybe other copies somewhere, but I think I got most of them. Do I have the config file in the right place? Later, Leon A fanatic is one who can't change his mind and won't change the subject. Sir Winston Churchill ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
native xpdf vs static xpdf for linux (couldn't create a font for...)
Hello, I would like to use native xpdf (compiled from ports) for viewing pdf files, but it's almost impossible,, since for many pdf's it can't find used fonts and of course doesn't show any text. The question would be, why? ;) BTW, statically linked xpdf for linux which I downloaded from foolabs.com (ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.00-linux.tar.gz) shows everything. Everything looks like: $ xpdf ~/sample.pdf Error: Couldn't create a font for 'BA+TimesNewRomanPSMT' $ ~/tmp/xpdf-3.00-linux/xpdf ~/sample.pdf $ I've put this pdf (generated with StarOffice) at: http://devnull.lt/files/sample.pdf $ ldd `which xpdf` /usr/X11R6/bin/xpdf: libt1.so.5 => /usr/local/lib/libt1.so.5 (0x28123000) libfreetype.so.9 => /usr/local/lib/libfreetype.so.9 (0x28173000) libXm.so.3 => /usr/X11R6/lib/libXm.so.3 (0x281df000) libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x28429000) libXp.so.6 => /usr/X11R6/lib/libXp.so.6 (0x2847a000) libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x28482000) libXpm.so.4 => /usr/X11R6/lib/libXpm.so.4 (0x28491000) libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x284a) libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x284a9000) libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x284c) libstdc++.so.4 => /usr/lib/libstdc++.so.4 (0x28588000) libm.so.2 => /lib/libm.so.2 (0x28644000) libc.so.5 => /lib/libc.so.5 (0x2865d000) libz.so.2 => /lib/libz.so.2 (0x2873e000) libXau.so.0 => /usr/X11R6/lib/libXau.so.0 (0x2874c000) I'm running 5.2-CURRENT, if this means something ;) TIA Paulius ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Interrupts crowding
Hello List, maybe this is not realy FreeBSD specific but i hope you can still answer that. I am wondering if there is a way to prevent some hardware components from interrupt sharing, because i think this is a bottleneck situation sometimes. I discovered this while looking at my /var/log/messages after a reboot of my Freebsd 4.8 Box USB,VGA,Ethernet are sharing irq 10 Does anyone if this is somehow configurable. Or does someone know how much overhead such a "irg polling" will cost. I think it would be much better to share the irq in another order e.g. ethernet with parralel port... Karsten ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
bad clusters problem
hi, i try to install a freebsd miniinstall distribution on my laptop compaq armada 4150T with 2GB disk space, from dos partition, everything was work OK until the installation begin copy the files to a created freebsd partition. On this space is some bad clusters, and therefore installation will irretrievably stop. My question is, it is possible that installation skip the badblocks and write data only on good clusters ? I try to install bsd by many ways already the fifth day and i dont want resign just now before finish line. Thanks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading FreeBSD to a new release
On Fri, 11 Jun 2004, Peter Pauly wrote: > On Fri, Jun 11, 2004 at 01:54:26PM -0400, JJB wrote: > > Are these supervisor cards unique to IBM & HP? > > Can the card be bought separately and will they work on generic > > motherboard? > > Do you have URL for info on these supervisor cards? > > They are unique to each manufacturer. I am not aware of a generic one. We currently > use IBM's. Just google for "IBM remote supervisor II". The IBM can even be accessed > via a web browser (with password security obviously). I'm not > up-to-date on the Compaq's. the Compaq (new HP) one is called remote insight light out edition II a quick google should find the relevent URL I'd be supprised if it works in non Compaq/HP servers though. (meant to try it but we dont have any at my current workplace :( ) some more modern Compaq/HP servers have them intergrated. one nice feature I like is the Virtual floppy drive. if you realy needed to you could (in theory, never tried it) install any OS that supports floppy based installs without having to go near the machine if the light out board had the right network settings. > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ipfw + natd + stateful rules. For the archives
For the list's archives. Here is everything you need for ipfw/natd/stateful. Add these statements to kernel source and compile kernel to enable # Enable kernel IPFW. # option IPFIREWALL # Adds filtering code into kernel option IPFIREWALL_VERBOSE # enable logging thru syslogd(8) option IPFIREWALL_VERBOSE_LIMIT=5 # stop attack via syslog flooding option IPDIVERT# needed to use natd from IPFW /etc/rc.conf # Required For IPFW kernel firewall support firewall_enable="YES" # Start daemon firewall_script="/etc/ipfw.rules" # run my custom rules if present # sh /etc/ipfw.rules will load # new rules file after editing. firewall_logging="YES" # Enable events logging natd_enable="YES" # Required For IPFW nat function natd_interface="rl0" # interface name of public internet Nic natd_flags="-dynamic -m" #-m = preserve port numbers if possible Here is the /etc/ipfw.rules file without comments. #!/bin/sh cmd="ipfw -q add" skip="skipto 500" pif=rl0 ks="keep-state" good_tcpo="22,25,37,43,53,80,443,110,119" ipfw -q -f flush $cmd 002 allow all from any to any via xl0 # exclude Lan traffic $cmd 003 allow all from any to any via lo0 # exclude loopback traffic $cmd 100 divert natd ip from any to any in via $pif $cmd 101 check-state # Authorized outbound packets $cmd 120 $skip udp from any to xx.168.240.2 53 out via $pif $ks $cmd 121 $skip udp from any to xx.168.240.5 53 out via $pif $ks $cmd 125 $skip tcp from any to any $good_tcpo out via $pif setup $ks $cmd 130 $skip icmp from any to any out via $pif $cmd 135 $skip udp from any to any 123 out via $pif $ks # Deny all inbound traffic from non-routable reserved address spaces $cmd 300 deny all from 192.168.0.0/16 to any in via $pif #RFC 1918 private IP $cmd 301 deny all from 172.16.0.0/12 to any in via $pif #RFC 1918 private IP $cmd 302 deny all from 10.0.0.0/8 to any in via $pif #RFC 1918 private IP $cmd 303 deny all from 127.0.0.0/8 to any in via $pif #loopback $cmd 304 deny all from 0.0.0.0/8 to any in via $pif #loopback $cmd 305 deny all from 169.254.0.0/16 to any in via $pif #DHCP auto-config $cmd 306 deny all from 192.0.2.0/24to any in via $pif #reserved for doc's $cmd 307 deny all from 204.152.64.0/23 to any in via $pif #Sun cluster interconnect $cmd 308 deny all from 224.0.0.0/3 to any in via $pif #Class D & E multicast # Authorized inbound packets $cmd 400 allow udp from xx.70.207.54 to any 68 in $ks $cmd 420 allow tcp from any to me 80 in via $pif setup limit src-addr 1 $cmd 425 allow icmp from any to any icmptypes 0,3,11,12 in via $pif $cmd 450 deny log ip from any to any # This is skipto location for outbound stateful rules $cmd 500 divert natd ip from any to any out via $pif $cmd 510 allow ip from any to any end of rules ## Here is the /etc/ipfw.rules file with comments. #!/bin/sh Start of IPFW rules file ### # Flush out the list before we begin. ipfw -q -f flush # Set rules command prefix cmd="ipfw -q add" skip="skipto 800" pif="rl0" # public interface name of Nic card # facing the public internet # # No restrictions on Inside Lan Interface for private network # Not needed unless you have Lan. # Change xl0 to your Lan Nic card interface name # $cmd 005 allow all from any to any via xl0 # # No restrictions on Loopback Interface # $cmd 010 allow all from any to any via lo0 $cmd 014 divert natd ip from any to any in via $pif # # Allow the packet through if it has previous been added to the # the "dynamic" rules table by an allow keep-state statement. # $cmd 015 check-state # # Interface facing Public internet (Outbound Section) # Interrogate session start requests originating from behind the # firewall on the private network or from this gateway server # destine for the public internet. # # Allow out access to my ISP's Domain name server. # x.x.x.x must be the IP address of your ISP's DNS # Dup these lines if your ISP has more than one DNS server # Get the IP addresses from /etc/resolv.conf file $cmd 020 $skip tcp from any to xx.168.240.2 53 out via $pif setup keep-state $cmd 021 $skip udp from any to xx.168.240.2 53 out via $pif keep-state # Allow out access to my I
Re: Upgrading FreeBSD to a new release
On Fri, Jun 11, 2004 at 01:54:26PM -0400, JJB wrote: > Are these supervisor cards unique to IBM & HP? > Can the card be bought separately and will they work on generic > motherboard? > Do you have URL for info on these supervisor cards? They are unique to each manufacturer. I am not aware of a generic one. We currently use IBM's. Just google for "IBM remote supervisor II". The IBM can even be accessed via a web browser (with password security obviously). I'm not up-to-date on the Compaq's. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Upgrading FreeBSD to a new release
Are these supervisor cards unique to IBM & HP? Can the card be bought separately and will they work on generic motherboard? Do you have URL for info on these supervisor cards? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Peter Pauly Sent: Friday, June 11, 2004 1:07 PM To: [EMAIL PROTECTED] Subject: Re: Upgrading FreeBSD to a new release On Sun, Jun 06, 2004 at 11:41:15PM +0200, Roman Kennke wrote: > Hi list, > > One thing, that is making me _not_ using FreeBSD is, that I see no way > to easily upgrade from, say 5.1 to 5.2 (just an example), over network. This may or may not be an option for you: both IBM and HP (Compaq) offer remote supervisor cards that offer network access to the machine, even when it is booting, etc. You can use it to access the BIOS, watch the machine boot, get into single user mode, etc, all from your chair in another city. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hardware compatability list query (of d00m)
Ignore the "of d00m" too much invader zim does odd things to you. Anyway, to the point, is there a big hardware compatability list anyway, i dont mean like the one on freebsd.org rather a site stating actual tried and tested cards and the like as opposed to chipsets and controllers ? Just wondered :P Mike Woods IT Technician ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Auto-Reply
We're sorry, this e-mail address has been discontinued. For comments, remarks and questions fill out the form on http://talkto.agfa.com/corporate/mailhand.nsf/webmastermail This is an automatically generated message; Please do not reply to this e-mail. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FYI - Belkin Bluetooth USB Adapter recognized in FreeBSD 5.2.1 Release
The Belkin Bluetooth USB Adapter, model F8T001 (100 meter range), is not in the hardware notes, I thought I'd mention it here: I just installed FreeBSD 5.2.1 on a Dell Inspiron 8100. The Belkin Bluetooth USB Adapter mentioned above was recognized as ubt0. Also, 'hccontrol -n ubt0hci inquiry' returns its hardware information, including its BD_ADDR. I'm new to this bluetooth stuff, and I still have to customize the OS, so I haven't gotten any further in testing. Have fun, Andrew Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
contributing: addition of package
Hi, This question is related to addition of a package (not related to OS or kernel) to freebsd. I read from the contribution page about 'value-added' packages. Is it related only to OS related packages or other s/w's like compilers etc too? I am wondering if this small piece of utility will be of any use: it is a C++ unit test framework, quite flexible, simple, high-quality, and very powerful. Provides many features and capabilites for automated testing. I have tested it for Solaris, linux, and Windows so far (plan to release for bsd this week). Release under BSD license (on sourceforge). http://www.oaklib.org/docs/oak/test/marticle/oakut.html Could something like this be contributed? Thanks, Vishal _ Catch up with old friends. Bring back the good times. http://www.batchmates.com/msn.asp Reconnect with the past. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thinkad 600x PCMCIA devices fail upon insertion
Hi! I saw u'r question on the freebsd-board. I have a Thinkpad 600x and the same problem with bsd and pcmcia-cards as well. Since i'm a totaly new into bsd - i've no idea where to start on sloving that issue. So i hope that you managed to get pcmcia-cards working on the TP600x and can give me a little hint. By the way mine is Siemens i-gate11 prism2 wlancard - along several other "normal" networkcard that i tried. I hope you can help me with this and Thanx in advance Olaf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Upgrading FreeBSD to a new release
On Sun, Jun 06, 2004 at 11:41:15PM +0200, Roman Kennke wrote: > Hi list, > > One thing, that is making me _not_ using FreeBSD is, that I see no way > to easily upgrade from, say 5.1 to 5.2 (just an example), over network. This may or may not be an option for you: both IBM and HP (Compaq) offer remote supervisor cards that offer network access to the machine, even when it is booting, etc. You can use it to access the BIOS, watch the machine boot, get into single user mode, etc, all from your chair in another city. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
"The Complete FreeBSD": errata and addenda
The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, The Complete FreeBSD, published by O'Reilly, is no exception. Inevitably, a number of bugs and changes have surfaced. "The Complete FreeBSD" has been through a total of five editions, including its predecessor "Installing and Running FreeBSD". Two of these have been reprinted with corrections. I maintain a series of errata pages. Start at http://www.lemis.com/errata-4.html to find out how to get the errata information. Have you found a problem with the book, or maybe something confusing? Please let me know: I'm constantly updating it. Greg ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
How to get best results from FreeBSD-questions
How to get the best results from FreeBSD questions. === Last update $Date: 2003/03/09 22:09:31 $ This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. = Contents: I:Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions, -newbies or -hackers? IV: How to submit a question to FreeBSD-questions V:How to answer a question to FreeBSD-questions I: Introduction === This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions == When you subscribed to FreeBSD-questions, you got a welcome message from [EMAIL PROTECTED] In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions mailing list! If you ever want to remove yourself from this mailing list, you can send mail to "[EMAIL PROTECTED]" with the following command in the body of your email message: unsubscribe freebsd-questions Greg Lehey <[EMAIL PROTECTED]> Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as [EMAIL PROTECTED] Since then, I have changed it to [EMAIL PROTECTED] If I were to try to remove [EMAIL PROTECTED] from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to [EMAIL PROTECTED], and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions, -newbies or -hackers? === Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In addition, the FreeBSD-newbies l
Re: Routing question
Perhaps if you post more info, we can come up with creative solutions for you. My big question is why? AFAIK, you cannot have more than one default gateway, unless you are using netgraph to balance between network interfaces. However, you could NAT C & D to their respective "public" interfaces. If E is a real IP, then the NATed traffic should flow to that interface. I would suggest using pf, as it is a most excellent firewall package. Here is the section of a PF guide regarding NAT. http://www.openbsd.org/faq/pf/nat.html Your rules would look like this (these are from memory, so sanity check them): -- #define your interfaces as macros: A = "fxp0" B = "fxp1" C = "fxp2" D = "fxp3" E = "fxp4" #define your NAT translations using our macros: nat on $A from ($C:network) to any -> $A nat on $B from ($D:network) to any -> $B #define your filtering rules: ... -- However, you will find that route add will not allow multiple default routes. You must use another package to allow for that, or at least it is beyond my knowledge. Let me know if you figure it out, I would be very interested. Leon Botes wrote: I have a box with 5 nics. Cal them A,B,C,D,E. A & B are different internet connections. E is a connection to a mail server on a public /29 C & D are connections for 2 differnet client networks. Is it possible to have all traffic coming in via C sent to a default gateway on A's network and all traffic coming in via D sent to a default gateway on B's network. And secondly will both client networks be able to see the E/29? If so how? Thanks Leon ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: rpc.statd needs a lot of memory?
On Thu, Jun 10, 2004 at 09:30:04PM -0500, adp wrote: > I am running FreeBSD 4.9. We have several NFS clients and one server. On all > machines we are running rpc.statd. I noticed that the size is around 257MB, > although res is usually only around 460KB so this isn't a big problem. Why > is the size so large though? FAQ: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#STATD-MEM-LEAK Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgpYn6dfLLLxK.pgp Description: PGP signature
rpc.statd needs a lot of memory?
I am running FreeBSD 4.9. We have several NFS clients and one server. On all machines we are running rpc.statd. I noticed that the size is around 257MB, although res is usually only around 460KB so this isn't a big problem. Why is the size so large though? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem: cannot install on Dell 400SC
> > Looks to me as if the SCSI controller card is buggy. Try disabling search > other LUNS. OK. I did that with no noticable difference. I did notice, though, in monkeying around that the fdisk did appear to write the boot block. When I let it go on and boot without any CD or floppy in it, the FreeBSD boot record attempted to start and of course, couldn't find a kernel since one hadn't been written. So, I tried again and first had Partition Magic make two slices with a DOS Fat32 on the first and the second unformatted, then had the FreeBSD installer write the FreeBSD MBR and it seemed to do so just fine, even though the newfses still failed on the partitions, so no filesystems were built and nothing installed. When I rebooted, it came up with the typical FreeBSD MBR question F1 - DOS F2 - FreeBSD Hittint F2 made it read the FreeBSD boot block on the second slice. But, of course it couldn't really boot any farther than that because no filesystems or kernel were there. So, it still makes me thing that FreeBSD can talk at least some to that combination of LSIL 53C1030 controller and Fujitsu hard disk. It writes the slice table, label, MBR and boot block. But, then it can't do anything else. Any other [positive] suggestions will be appreciated. jerry > > BSDBoy > > -Original Message- > > > > > Is the SCSI channel terminated properly? What is the LUN of the HDD? > > The SCSI cable appears to be terminated. It has a terminator block > on the end of the cable just past the hard drive. > > As for the LUN, I think it would be '0' on channel 'B' if I am > making sense of the BIOS screen. Once I get that close to the > hardware, I am getting out of my level. It has a setting that > says scan LUNs greater than 0 and that is set to yes by default. > The SCSI itself appears to be set to LUN 7, by the way. > > jerry > > > > > BSDBoy > > > > > > Hi, > > > > I am hoping someone can give us some clues about this problem. > > A couple of us have done some searching, but found nothing that > > bears directly on it. Maybe some different search clues might > > also help. I am hoping for more than just "it won't work, because..." > > but, even a conclusive one of those would get us off the point - which > > begins to dig in after a while... > > > > Sorry this is rather long, but I wanted to include anything that > > might possibly be relevant. Here goes. > > > > One of our sites recently purchased a Dell Poweredge 400SC and > > wants to run our school district network server system on it. > > Our system is currently based on FreeBSD 4.9 with some modifications > > to control the initial installation and aid in system management. > > We have it running on a number of other Dell Poweredge machines but > > not this particular model and especially not the LSIL SCSI controller. > > > > It has a 2.4G Celeron CPU, > > 1 GB Memory > > Planar PE400SC, A/N, 2 Motherboard > > LSI Logics 53C1030 SCSI controller > > Fujitsu 36GB MAP337NP SCSI U320, 10K, 68 Pin connector hard > drive. > > + NIC, IDE controller, CDROM, Tape drive, etc. > > > > Although this model was not our recommendation, it would look like, > > on paper, that it should at least, function. But,,, > > > > We cannot get any FreeBSD system to install on it, not ours or even > > a straight FreeBSD 4.9 or 5.2.1 system - and I just tried 4.10 too with > > the same result. > > > > It reads the CD, boots into the sysinstall or our install system just > > fine. It appears to do the fdisk and disklabel just fine. Then it > > hangs or appears to hang trying to do the newfs. It puts out the message > > about writing superblocks and then nothing more comes out - no list > > of superblocks of any kind, not even the first. > > > > I have made up variations on our version of sysinstall with additional > > messages but have not gotten any information that means anything to me. > > > > After a wait of several minutes it writes stuff to the ALT console. > > > > If I let it set long enough (hours) it puts out a failed message. > > > > > > I didn't have any MS install media handy, But did have my Partition Magic > > "emergency" boot floppies around so I used them to take a look after > > having attempted to do first our install, then FreeBSD 4.9 and finally > > FreeBSD 5.2.1. > > > > PM quite happily looked at things and recognized the FreeBSD slice (which, > > of course it called a partition). So, I deleted the slice and created > > two and used the FreeBSD install CD to attempt to install on the second > > slice (da0s2) which it seemed happy to do.After checking again with > > PM and seeing that the new slicing had the FreeBSD id one it I popped in > > another FreeBSD cd and sysinstall happily read up that label with all > > the FreeBSD partitions (a,b,e,f,g,h) that I had made. So, FreeBSD can > > obviously write some part of the disk. But, newfs still wo
DNS + DHCP auto host updates.
Hello, does anyone have a good guide for setting up DNS updates using ISC DHCP server? I want hosts on my network to become registered with DNS server when they recieve network configuration. I have not been able to find a guide or more information than what is in the man pages for dhcpd and bind. Any help is appreciated. Please reply to the list. Thanks. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Routing question
I have a box with 5 nics. Cal them A,B,C,D,E. A & B are different internet connections. E is a connection to a mail server on a public /29 C & D are connections for 2 differnet client networks. Is it possible to have all traffic coming in via C sent to a default gateway on A's network and all traffic coming in via D sent to a default gateway on B's network. And secondly will both client networks be able to see the E/29? If so how? Thanks Leon ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem with samba - windows clients reboot when saving.
"admin" <[EMAIL PROTECTED]> wrote: > hello: > > Freebsd 4.9 > Recent install world and kernel after cvsup > Samba 2.2.8a > > The clients have files in their home directories and on a common share on > the BSD box. > Every so often when they make a change to a file and save it the client > machine reboots. You might be better off asking on the Samba mailing list, but I can say two things: 1) I've never see this happen before. 2) If the client is rebooting, the problem is with the client, not the server. > Clients run win98 and office XP with SP2. Windows 98 is notoriously buggy. Although I've never seen it reboot just because it was having trouble with a network share, I have seen it do all sorts of other broken things. However, it sure seems to me that this is a question that you'll get much better answer on the samba lists than the FreeBSD ones, as it doesn't seem very related to FreeBSD. > error for the log.smbd: > smbd version 2.2.8a started. > Copyright Andrew Tridgell and the Samba Team 1992-2002 > [2003/10/15 08:04:55, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:17:43, 0] lib/util_sock.c:read_socket_with_timeout(300) > read_socket_with_timeout: timeout read. read error = Connection reset by > peer. > [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(794) > oplock_break: receive_smb error (Connection reset by peer) > oplock_break failed for file HONDE OORLASTE.doc (dev = 27406, inode = > 2861321, file_id = 3). > [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(879) > oplock_break: client failure in break - shutting down this smbd. > [2003/10/15 08:18:11, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:18:15, 0] smbd/oplock.c:request_oplock_break(1011) > request_oplock_break: no response received to oplock break request to pid > 934 on port 1127 for dev = 27406, inode = 2861321, file_id = 3 > [2003/10/15 08:20:21, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:38:18, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:42:08, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > [2003/10/15 08:49:09, 0] lib/util_sock.c:read_data(436) > read_data: read failure for 4. Error = Connection reset by peer > > There have been a lot more reboots that don't appear in the log - don't know > why. > > smb.conf : > # Global parameters > [global] > workgroup = MATZIKAMA > netbios name = BSD1 > encrypt passwords = Yes > unix password sync = Yes > preferred master = Yes > domain master = Yes > admin users = %S > create mask = 0777 > directory mask = 0777 > > [homes] > valid users = %S > read only = No > browseable = No > > [shared] > path = /usr/home/shared > read only = No > guest ok = Yes > vfs object = /usr/local/lib/samba/recycle.so > vfs options = /usr/local/etc/recycle.conf.default > > [printers] > path = /var/spool/samba > guest ok = Yes > printable = Yes > browseable = No > [hp5000] > comment = Hp 5000 at Amanda > path = /var/spool/lpd/hp5000 > read only = No > guest ok = Yes > printable = Yes > printer name = hp5000 > oplocks = No > . and six more printers identical to this one. > > The problem appeared about 2 months after i upgraded to 2.2.8a > > I have set the permissions on the users files to 777 and checked ownership > just to be sure. Still does the same. > I'm not sure if the problem lies on samba office xp or win98. All antivirus > software on the clients have been disabled. > > Any help is needed urgently. > Thanks in advance leon. > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: plz?
> > Hi uhmm i cant seen to be able to download bsd can anyone tell me how > to download from the ftp server because everytime i try to download > the files it fr3zz3$ My computer First, on your local host that will be receiving the files, make sure you are in some place that has enough room for them. A popular error is starting the download and running out of space in the middle. So, presuming you want to download FreeBSD 4.10-RELEASE for an i386 type PC, for example: cd big_space_available ftp ftp.freebsd.org log in as 'anonymous' with your Email address as password cd pub/FreeBSD/releases/i386/ISO-IMAGES/4.10 binary get 4.10-RELEASE-i386-miniinst.iso fbsd410.iso ascii get CHECKSUMS.MD5 bye Voila, you should have a copy of the mini-iso ready to burn sitting in your local disk in a file named fbsd.iso. Burn it as a straight data file. Don't try to create an iso from it. It is already an iso. Note, that I like to use the shorter name for the iso file on my local host because it is less to type as I do things with it. You do not have to. Note that you can then run an md5 checksum on the file and compare it to the checksum listed in the CHECKSUMS.MD5 file if you wish and have an md5 utility handy. It is useful to assure yourself that the download was successfully accomplished without error. In FreeBSD, just type: 'md5 fbsd410.iso' (or whatever filename you used) and compare the string with the currect one in the file. If you would rather download the full install images rather than install over the net via ftp with the mini-iso, then just download 4.10-RELEASE-i386-disc1.iso and 4.10-RELEASE-i386-disc2.iso instead. If you want 5.2.1 instead of 4.10, then replace 4.10 with 5.2.1 in the cd and adjust the file names appropriately on the get command. If your local host machine that will be receiving the files is also a UNIX machine, then you probably don't need the /binary' and 'ascii' commands, but they won't hurt and are good to get in the habit of using. If you are receiving to a Microsloth environment, then you should be sure and use the 'binary' and 'ascii' commands appropriately. This actually does work. jerry ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problem with samba - windows clients reboot when saving.
hello: Freebsd 4.9 Recent install world and kernel after cvsup Samba 2.2.8a The clients have files in their home directories and on a common share on the BSD box. Every so often when they make a change to a file and save it the client machine reboots. Clients run win98 and office XP with SP2. error for the log.smbd: smbd version 2.2.8a started. Copyright Andrew Tridgell and the Samba Team 1992-2002 [2003/10/15 08:04:55, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer [2003/10/15 08:17:43, 0] lib/util_sock.c:read_socket_with_timeout(300) read_socket_with_timeout: timeout read. read error = Connection reset by peer. [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(794) oplock_break: receive_smb error (Connection reset by peer) oplock_break failed for file HONDE OORLASTE.doc (dev = 27406, inode = 2861321, file_id = 3). [2003/10/15 08:17:43, 0] smbd/oplock.c:oplock_break(879) oplock_break: client failure in break - shutting down this smbd. [2003/10/15 08:18:11, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer [2003/10/15 08:18:15, 0] smbd/oplock.c:request_oplock_break(1011) request_oplock_break: no response received to oplock break request to pid 934 on port 1127 for dev = 27406, inode = 2861321, file_id = 3 [2003/10/15 08:20:21, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer [2003/10/15 08:38:18, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer [2003/10/15 08:42:08, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer [2003/10/15 08:49:09, 0] lib/util_sock.c:read_data(436) read_data: read failure for 4. Error = Connection reset by peer There have been a lot more reboots that don't appear in the log - don't know why. smb.conf : # Global parameters [global] workgroup = MATZIKAMA netbios name = BSD1 encrypt passwords = Yes unix password sync = Yes preferred master = Yes domain master = Yes admin users = %S create mask = 0777 directory mask = 0777 [homes] valid users = %S read only = No browseable = No [shared] path = /usr/home/shared read only = No guest ok = Yes vfs object = /usr/local/lib/samba/recycle.so vfs options = /usr/local/etc/recycle.conf.default [printers] path = /var/spool/samba guest ok = Yes printable = Yes browseable = No [hp5000] comment = Hp 5000 at Amanda path = /var/spool/lpd/hp5000 read only = No guest ok = Yes printable = Yes printer name = hp5000 oplocks = No . and six more printers identical to this one. The problem appeared about 2 months after i upgraded to 2.2.8a I have set the permissions on the users files to 777 and checked ownership just to be sure. Still does the same. I'm not sure if the problem lies on samba office xp or win98. All antivirus software on the clients have been disabled. Any help is needed urgently. Thanks in advance leon. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 configure question
On Fri, Jun 11, 2004 at 12:05:25AM -0600, LW Ellis wrote: > Thanx to some great people out there I have FreeBSD runningYea! > Having some difficulty setting up the XFree86 Server. > I did like it said in the handbook, but when I > ee XF86Config.new, I get a blank file. > If I use the configure tool in the sysinstall, it fails to save the file. > I am logged on as 'root' > > Part 2 > This computer is 3rd handme down... > I found the screen resolution, > Horizontal and vertical KHZ > but nothing on the video adapter chipset or memory. > Where do I go from here. > > Thanx in advance. > > Later, > Leon > A fanatic is one who can't change his mind and won't change the subject. > Sir Winston Churchill For the past year or two I have found it much easier to let X create a base config file and then to manually make small changes to it that are necessary. Assuming you are using X v4.x, you can do this by running the command: # XFree86 -configure This command will cause X to try to identify your video card, monitor and possibly the mouse, and will write out a suitable base configuration file to /root/XF86Config.new. It could easily be that this file as is will work for you. Simply copy or move it over to /etc/X11/XF86Config and then try to launch X. Then tweak the file as necessary. You may have to manually set the resolution to something acceptable. Nathan pgpOdLdiNHcfw.pgp Description: PGP signature
Re: plz?
On Thu, 10 Jun 2004, luis juarez wrote: Hi uhmm i cant seen to be able to download bsd can anyone tell me how to download from the ftp server because everytime i try to download the files it fr3zz3$ My computer What exactly do you mean by fr3zz3$ ? Which files do you try to download? Regards, Uli. - Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ServerWorks GC-SL and GC-LE
dear list, i would like to know if the ServerWorks GC-LE and GC-SL chipsets are supported under 4.10R. The hardware.txt doesn't list them and googling I found a problem report for 4.9. thanks in advance! zheyu -- "Sie haben neue Mails!" - Die GMX Toolbar informiert Sie beim Surfen! Jetzt aktivieren unter http://www.gmx.net/info ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Headaches from auto* and libtool... (FOLLOW_UP)
Henrik W Lund wrote: Greetings, list! I've been given headaches lately, and I believe the auto* brothers and their buddy, libtool, to be the culprits. It all started when I installed Anjuta, the C/C++ IDE for GNOME. What it basically does for project management is use autoconf, automake and libtool to generate the familiar ./configure script and its like. Now, this all works well and good up until the configure script is run. It will fail with the following message: ... checking whether ln -s works... yes loading cache /dev/null within ltconfig ltconfig: you must specify a host type if you use `--no-verify' Try `ltconfig --help' for more information configure: error: libtool configure failed Now, the pickle is that I've got 4 versions of libtool installed, 3 of which are registered in the package database. I've got libtool-1.3.4 (not in the package database), libtool-1.3.5_2 (from origin devel/libtool13), libtool-1.4.3_3 (from origin devel/libtool14) and libtool-1.5.6 (from origin devel/libtool15). And with two versions each of both autoconf and automake installed, I'm suspecting that an unfortunate mix of versions of the various programs is what's causing this failure. I've googled around all day, and the error seems to be fairly common, but I've yet to find a clear answer. I'll tell you what I've tried: I've tried playing with symlinking libtool and libtoolize to different versions of libtool (as the binaries are named libtool13, libtool14, etc), to no avail. I've tried editing ./configure, removing the --no-verify flag, but this seems to always be replaced somehow. I've tried different macros in configure.in for autoconf, like AC_PROG_LIBTOOL and AC_CANONICAL_HOST, but still nothing. I've even tried different values for HOST as an environment variable. I know it's not Anjuta, because the IDE doesn't even need to be running for the error to occur. Basically, I'm stumped. Can anyone here help me? What's so special about these three programs that require numerous versions of each installed on the same system? Or can I uninstall all the older versions, keeping only the newest? Will this even do me any good? Thanks in advance! -Henrik W Lund Kinda following up on myself here, posting what I've found after several more hours of digging around in documentation. Actually, as I'm typing this, I found the solution. For some reason, the autogen.sh script creates the configure script to call ltconfig with the --no-verify flag. This causes ltconfig to rely on having the host type passed along on the command line (something the autogen-generated configure script does not do). The solution is simply to pass it along to the configure script (not --host=cpu-manufacturer-os-kernel, simply cpu-manufacturer-os-kernel). There may be some obscure autoconf feature to prevent it from putting the --no-verify flag into the configure script (why is there even a --no -verify flag???), but I've yet to find one. Anyways, since I've answered my own question, I thought I'd just as well document it. :-) Cheers! -Henrik W Lund ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Error in starting SSH
Bilal Ahmed wrote: I have been facing an error on running sshd: /usr/sbin/sshd Could not load host key: /etc/ssh/ssh_host_key Could not load host key: /etc/ssh/ssh_host_dsa_key Are these two files not there? In 5.X, you should start such daemons from /etc/rc.d : # cd /etc/rc.d # ./sshd start It will generate the host key files, if not there; and then start the daemon. Rob. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Bash Startup Files
"Arend P. van der Veen" <[EMAIL PROTECTED]> writes: > Hi, > > I have been trying to clarify what bash startup files are sourced and > when. I am using bash-2.05b.007. I have been hunting around on the > web and I have > found the following summary: For Login shells: > > On logging in: >If `|/etc/profile|' exists, then source it. > >If `|~/.bash_profile|' exists, then source it, > else if `|~/.bash_login|' exists, then source it, > else if `|~/.profile|' exists, then source it. > > On logging out: >If `|~/.bash_logout|' exists, source it. > > For non-login interactive shells: > On starting up: >If `|~/.bashrc|' exists, then source it. > > For non-interactive shells: > On starting up: >If the environment variable |ENV| is non-null, expand the >variable and source the file named by the value. If Bash is >not started in Posix mode, it looks for |BASH_ENV| before >|ENV|. > > (From http://www.cse.unsw.edu.au/help/doc/info/bash/Bash_Startup_Files.html) There are easier ways to find the manual. "info bash" or even "man bash" would have gotten you to the information... > Other discussions on this topic essentially state the same thing. > After some testing it is not clear to me if bash under FreeBSD 4.9 is > working the same way. I have a case where both ~/.profile and > ~/.bash_profile exist and both are sourced. This is in contradition > to the above statements. I can't reproduce this. In my own setup, it is clearly not the case. > Can anybody point me to information to clarify what bash startup files are sourced > and when ? As far as I can see, the Fine Manual is entirely accurate on this point. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD 4.10 RELEASE questions
Louis LeBlanc <[EMAIL PROTECTED]> writes: > Hey everyone. I have a confusing situation here with the new kernel. > > I just upgraded to 4.10, and in the process, decided to get a > moderately updated kernel config. Particularly, I wanted to try to > get my sound working again. > > Here's the thing. I have the following lines in my kernel config: > device pcm > > # Serial (COM) ports > device sio0at isa? port IO_COM1 flags 0x10 irq 4 > device sio1at isa? port IO_COM2 irq 3 > device sio2at isa? disable port IO_COM3 irq 5 > device sio3at isa? disable port IO_COM4 irq 9 > > options PNPBIOS > > You'll see the reason I've included the serials in a sec: > > The dmesg.boot file shows the following tidbits: > pci0: (vendor=0x12eb, dev=0x0001) at 14.0 irq 5 > > and > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > > and > unknown: can't assign resources > unknown: can't assign resources > unknown: can't assign resources > unknown: can't assign resources > unknown: can't assign resources > unknown: can't assign resources > unknown: can't assign resources > > Now, The serials that showed up appear correct to me, but there isn't > any sio2 or sio3, but the unknown card at pci0 is in on 5. Not sure > if there's any connection. > > The things I'd like to resolve are the unknowns - to either correct or > eliminate the things causing them, and to get the sound card showing > up. The card is onboard in a Dell Optiplex G1, and before the last > time I upgraded (thereby breaking sound) it was working fine with the > aureal-kmod port. > > Problem is that I'm not sure if I should have the following: > > device pcm0 at isa? irq 10 drq 1 flags 0x0 > > Note that my fxp0 is using irq 10. Should I just change the irq? > Should I leave it and/or the PNPBIOS line out? > > I'm sure there's some pertinent details I'm leaving out, so don't > hesitate to let me know what it is. > > Thanks for the feedback. Do you *want* to use the extra serial ports? You are compiling them disabled, after all. If you don't want them, try compiling a kernel that doesn't have them, and see what happens... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: two tar issues: man page and --totals behaviour
"Stefan A. Deutscher" <[EMAIL PROTECTED]> writes: > Hi folks, > > just noticed two issues with tar on FreeBSD 5.1 (actually, it is > GNU tar 1.13.25): It's a heavily modified version of Gnu tar, actually. > (1) The man page is somewhat out of sync with what tar --help shows > in terms of options > > Should I submit a PR for that one, or send a bug report to the gnu > tar maintainers, or both? The man page isn't a primary documentation method; the *real* manual is in Gnu info. ["info tar"] It's probably the local (FreeBSD) changes that haven't gotten documented. > (2) The option --totals, according to the docs and --help, is supposed > to show the bytes _written_. It does not quite: > > - When running plain 'tar c', it actually shows the bytes written. > > - When running tar with any of the built-in compression flags, such > as 'tar -c -{z,Z,y}', it shows the exact same number of bytes as > when invoked without these flags. > > While, technically, it might show the bytes written _to_ the > compression program, for all practical purposes it appears to show > what was _read_ from disk. The space used on tape may be > significantly smaller. > > I understand that for backwards compatibility one cannot just change > the behaviour of this flag from one day to another. Fixing the docs > might be the easy way out, but I'd like to suggest the addition of > some flag that reports what was actually written _to_ the tape > device. > > Even if the device-internal HW compression may change what actually > ends up on tape (i.e. compressing uncompressed stuff somewhat while > probably not gaining anything on gzip or bzip2), this would give a > better indicator of tape usage and space left on a tape. This would be fairly tricky to implement with an external compression filter in software, never mind in hardware. > I have no idea whether this has been discussed here already, google > didn't like me enough to turn up relevant threads. Nor do I know how > the upcoming bsdtar handles that flag's behaviour. I don't think bsdtar has such a flag, actually. > Again, should I submit a PR for that one, or send a bug report to > the gnu tar folks, or both? If you have written the code to do what you're saying, please do submit it. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RFC: Free Software Hardware Compatibility - Centralised DB
On Fri, 2004-06-11 at 09:03, Joel Rees wrote: > > ... > > ASSUMPTION: > > ... > > We assume that it is in the best interests of each Free Software > > Unix-like operating system distribution, each kernel (eg. Linux, *BSD, > > HURD) and in the best interests of the end users, to have a > > centralised/ > > unified location for hardware information. > > ... > > I'm not sure that centralization is a valid assumption in the open > source community. The centralization is so that manufacturers have a single point of contact to submit their own hardware information to, however much or little that might be. > ...is that individuals and > companies who have hardware to donate ... This project has _nothing_ to do with donating hardware. It is about a Hardware Information Database. Hope that's clear to all Zenaan ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
plz?
Hi uhmm i cant seen to be able to download bsd can anyone tell me how to download from the ftp server because everytime i try to download the files it fr3zz3$ My computer - Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RFC: Free Software Hardware Compatibility - Centralised DB
(Apologies in advance --) On 2004.6.11, at 06:31 AM, Zenaan Harkness wrote: PLEASE NOTE: * Please do not reply-all Sorry, when you break the rules, the rules are broken. However, ... ASSUMPTION: ... We assume that it is in the best interests of each Free Software Unix-like operating system distribution, each kernel (eg. Linux, *BSD, HURD) and in the best interests of the end users, to have a centralised/ unified location for hardware information. ... I'm not sure that centralization is a valid assumption in the open source community. Getting hardware is only half the battle. I think that what the members of the open source community would prefer is that individuals and companies who have hardware to donate would be aware of (1) what projects they want or need to support and (2) where the hardware they have to donate can best be used. (It's a free market, we just use a different currency, so to speak.) That said, I suspect that, if a company or individual has hardware to donate and is not sure where it should go, a broadcast troll like this might actually be appropriate. (Which is why I'm even further breaking protocol here.) -- Joel Rees Opinions are like armpits. We all have two, and they all smell, but we really don't want the other guy to get rid of his. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RFC: Free Software Hardware Compatibility - Centralised DB
PLEASE NOTE: * Please do not reply-all (this is essentially an announcement and request for comments. For further discussion, please advise that you wish to be added to the soon-to-be-created mailing list (I'm still looking for an appropriate site to host this)). * Please forward this as appropriate (namely to those involved in hardware compatibility, certification, driver development, and/ or manufacture, as it relates to our free software community). ASSUMPTION: We in the free software community wish to have better and more up to date hardware identification and support. We assume that it is in the best interests of each Free Software Unix-like operating system distribution, each kernel (eg. Linux, *BSD, HURD) and in the best interests of the end users, to have a centralised/ unified location for hardware information. First and foremost though, it is in the best interests of the manufacturers - to simplify their job: For Microsoft, they have a single point of contact. Contrast this with the numerous HCLs, hardware sites (such as www.linux1394.org and linuxprinting.org), kernels and distributions, such as Debian, Red Hat, FreeBSD and a myriad of others. As a manufacturer, it is simply impossible to (generally) go anywhere near supporting all these free software projects. And so it is in the best interests of each of us individually, and collectively, if we can simplify the job of the manufacturer. As a manufacturer of a widget, if I have a single, commonly known place to go to provide technical and contact information, as much or as little as I desire (even perhaps just bus IDs and product names), then I might actually do so. We, as a community, might just have a hope of keeping up to date as compared with the proprietary os's out there, namely MSW*. - So, I hereby propose such a database be established. I am willing to contribute some of my own time and effort to doing so. This database and surrounding facilities will be os-, vendor-, distribution- and kernel- neutral, and will thereby attract many otherwise disparate parties, such as the BSDs and the GNU/Linux distros. If you and/ or your company is interested in supporting this effort, by way of working together on this project to unify HCLs, device and driver information or the like, then please reply to me and let me know that you would like to be added to the soon-to-be-created mailing list. If your organization can actively devote even some small resources to the project, that is obviously very much appreciated. - Once the database and submission facilities are minimally established, I propose that relevant parties widely advertise/ promote the fact to manufacturers (and users and developers too), that this database is the preferred and centralized means of submission of such information. The plan is to integrate seamlessly with existing Distribution-specific HCLs and due to the centralization provide and richer facility than is otherwise possible today. Thank you in advance, and regards to all, Zenaan ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Error in starting SSH
I have been facing an error on running sshd: /usr/sbin/sshd Could not load host key: /etc/ssh/ssh_host_key Could not load host key: /etc/ssh/ssh_host_dsa_key Disabling protocol version1. Could not load host key Disabling protocol version2. Could not load host key sshd :no hostkeys available -- exiting As instructed in the 1st screen that before sending the error "uname -a" output is : FreeBSD fw-ka.toyt-ind.com 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0:Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 Kindly help. Regards Bilal _ Tired of spam? Get [2]advanced junk mail protection with MSN 8. References 1. mailto:[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC 2. http://g.msn.com/8HMAEN/2734??PS=47575 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SCSI too slow
The 29160UW adapter has two internal lvd connectors, only one of those supports Ultra-160, the other one is provided for older equipment, since a SCSI chain will only operate as fast as the slowest device on it. Therefor make sure that the devices that supports Ultra-160 (or Ultra 2 Wide if thats what you have) is on the Ultra-160 connector, while the slower devices is on the other. If my memory is not failing me the Ultra-160 connector is the one to the left. Also, check your SCSI Bios, it has some speed related settings. /Emil A Eklund ([EMAIL PROTECTED]) - Original Message - From: "Karsten Fuhrmann" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 11, 2004 13:35 Subject: SCSI too slow > Hello, > i am using a Adaptec 29160UW Controller in my FreeBSD 4.8 Box together > with an Easyraid 2 external RAID System and a Quantum SDLT-320 Drive. > The problem is the data transfer Rate of my SCSI Channel is only 40 > Mbytes/s. > > dmesg shows > da0: Fixed Direct Access SCSI-2 device > Jun 8 16:17:17 stern /kernel: da0: 40.000MB/s transfers (20.000MHz, > offset 31, 16bit), Tagged Queueing Enabled > > Is there a way to change the transfer rate somehow, because at least my > SDLT is an ultra wide SCSI (LVD/SE) > > Cheers, > karsten > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Interrupt storm detected on "irq7: lpt0"
Hi! My last cvsup of -CURRENT on monday seems to have messed up printing somehow. When I try to print (I am using cups) I receive this message: Interrupt storm detected on "irq7: lpt0"; throttling interrupt source Result is: Printing becomes very slow (about one minute for a simple text file, longer for some OpenOffice document). What can be done? Regards, Uli. +---+ |Peter Ulrich Kruppa| | Wuppertal | | Germany | +---+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SCSI too slow
Hello, i am using a Adaptec 29160UW Controller in my FreeBSD 4.8 Box together with an Easyraid 2 external RAID System and a Quantum SDLT-320 Drive. The problem is the data transfer Rate of my SCSI Channel is only 40 Mbytes/s. dmesg shows da0: Fixed Direct Access SCSI-2 device Jun 8 16:17:17 stern /kernel: da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled Is there a way to change the transfer rate somehow, because at least my SDLT is an ultra wide SCSI (LVD/SE) Cheers, karsten ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
A board with SATA + console redirection (Intel SE7210TP1 orS875WP1)?
___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 configure question
On Fri, 11 Jun 2004, Matt Navarre wrote: > On Friday 11 June 2004 12:14, Nelis Lamprecht wrote: > > On Fri, 2004-06-11 at 08:05, LW Ellis wrote: > > > Having some difficulty setting up the XFree86 Server. > > > I did like it said in the handbook, but when I > > > ee XF86Config.new, I get a blank file. > > > If I use the configure tool in the sysinstall, it fails to save the file. > > > I am logged on as 'root' > > > > The first thing I would do before trying to configure your XFree86 > > Server is to find out exactly what Video card( Part 2 ) you are using. > > You can do this usually by going through your system message buffer from > > kernel startup. Edit the file /var/run/dmesg.boot and look for > > information which would indicate your VGA chipset, it usually starts > > with pci0: In some cases where your Video card is not recognised by the > > kernel you may need to identify the chipset in another way. Try opening > > the computer and looking at the chipset on the video card itself. > > > > What he said about the video card, but you also want the specs for your > monitor. Specificaly you need the horizontal and vertical synch rranges or > the frequencies the monitor can do. Otherwise you risk blowing the monitor. > > And no one wants that. > > Really you need to know what video card you're running and, idealy, how much > VRAM it's got, and the specs for your monitor. Cant help with the monitor but I use the vesa kernel module and that give VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0888c62 (122) VESA: NVidia in my dmesg when i boot so you can try kldload vesa and check the output with dmesg. might help. > > -- > "We all enter this world in the same way: naked, screaming, > and soaked in blood. But if you live your life right, that kind > of thing doesn't have to stop there." -- Dana Gould > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 configure question
On Friday 11 June 2004 12:14, Nelis Lamprecht wrote: > On Fri, 2004-06-11 at 08:05, LW Ellis wrote: > > Having some difficulty setting up the XFree86 Server. > > I did like it said in the handbook, but when I > > ee XF86Config.new, I get a blank file. > > If I use the configure tool in the sysinstall, it fails to save the file. > > I am logged on as 'root' > > The first thing I would do before trying to configure your XFree86 > Server is to find out exactly what Video card( Part 2 ) you are using. > You can do this usually by going through your system message buffer from > kernel startup. Edit the file /var/run/dmesg.boot and look for > information which would indicate your VGA chipset, it usually starts > with pci0: In some cases where your Video card is not recognised by the > kernel you may need to identify the chipset in another way. Try opening > the computer and looking at the chipset on the video card itself. > What he said about the video card, but you also want the specs for your monitor. Specificaly you need the horizontal and vertical synch rranges or the frequencies the monitor can do. Otherwise you risk blowing the monitor. And no one wants that. Really you need to know what video card you're running and, idealy, how much VRAM it's got, and the specs for your monitor. -- "We all enter this world in the same way: naked, screaming, and soaked in blood. But if you live your life right, that kind of thing doesn't have to stop there." -- Dana Gould ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
3WARE: Drive sector ECC error corrected
I'm currently running 3ware 8506-12 cards on freebsd 4.9 using the built in twe driver. Today (and previously) I've run into a situation where a volume stops responding to any read or write requests. Here is the AEN log: .18:44:28 Sat 29-May-2004Drive sector ECC error corrected on port 7 on controller ID:0. (0x23) Here is my dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE-p2 #4: Thu Feb 5 14:24:16 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP-GLOBAT Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2790.72-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 2146959360 (2096640K bytes) avail memory = 2086326272 (2037428K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee0 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee0 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee0 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec0 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec8 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Preloaded elf kernel "kernel" at 0xc04b8000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 20 entries at 0xc00fde80 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: (vendor=0x8086, dev=0x2541) at 0.1 pcib1: at device 2.0 on pci0 pci1: on pcib1 pci1: (vendor=0x8086, dev=0x1461) at 28.0 pcib2: at device 29.0 on pci1 IOAPIC #1 intpin 4 -> irq 2 pci2: on pcib2 twe0: <3ware Storage Controller> port 0x7000-0x700f mem 0xfc80-0xfcff,0xfc20-0xfc2f irq 2 at device 2.0 on pci2 twe0: 12 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048 pci1: (vendor=0x8086, dev=0x1461) at 30.0 pcib3: at device 31.0 on pci1 pci3: on pcib3 pci0: (vendor=0x8086, dev=0x2544) at 2.1 pcib4: at device 30.0 on pci0 IOAPIC #0 intpin 21 -> irq 5 IOAPIC #0 intpin 20 -> irq 10 IOAPIC #0 intpin 23 -> irq 11 pci4: on pcib4 pci4: at 3.0 irq 5 fxp0: port 0x8400-0x843f mem 0xfe00-0xfe01,0xfe041000-0xfe041fff irq 10 at device 4.0 on pci4 fxp0: Ethernet address 00:02:b3:e9:0d:28 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto em0: port 0x8440-0x847f mem 0xfe02-0xfe03 irq 11 at device 5.0 on pci4 em0: Speed:N/A Duplex:N/A isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: (vendor=0x8086, dev=0x2483) at 31.3 irq 0 orm0: at iomem 0xc-0xc7fff,0xc8000-0xc97ff,0xe3000-0xe3fff on isa0 pmtimer0 on isa0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! ad2: 39205MB [79656/16/63] at ata1-master UDMA100 acd0: CDROM at ata0-master PIO4 twed0: on twe0 twed0: 354550MB (726120320 sectors) twed1: on twe0 twed1: 763124MB (1562879488 sectors) twe0: command interrupt Mounting root from ufs:/dev/ad2s1a -- More relevant stuff from boot -v: twe0: <3ware Storage Controller> port 0x7000-0x700f mem 0xfc80-0xfcff,0xfc20-0xfc2f irq 2 at device 2.0 on pci2 twe0: AEN: twe0: 12 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048 twe0: Monitor ME7X 1.01.00.038, PCB Rev5, Achip 3.20, Pchip 1.30-66 twe0: port 0: WDC WD740GD-00FLA0 70911MB twe0: port 1: WDC WD740GD-00FLA0 70911MB twe0: port 2: WDC WD740GD-00FLA0 70911MB twe0: port 3: WDC WD740GD-00FLA0 70911MB twe0: port 4: WDC WD740GD-00FLA0 70911MB twe0: port 5: WDC WD740GD-00FLA0
Re: Paging multiple columns in the console
On Thu, Jun 10, 2004 at 06:38:45PM -0600, Warren Block wrote: > On Thu, 10 Jun 2004, Reed Loefgren wrote: > >Is there a way I can keep the > >multi-column output but still use a pager? > > Hmm.. 'apropos column' and aha! The column command can be used to, err, > re-columnize: > > ls /usr/bin | column -x | less ls -C /usr/bin | less Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp22IAGMnntS.pgp Description: PGP signature
Re: -current boot bring to db> prompt
On 2004-06-11 06:41, pirat <[EMAIL PROTECTED]> wrote: >On Thursday, 10 June 2004 at 21:49:01 +0700, pirat wrote: >> >> i boot my inspiron 1100 box but it stop at >> >> db> >> >> and i can not get out of there. what i did were that i copied >> ltmdm.ko from other machine to inspiron at /boot/kernel/ and add >> >> ltmdm_load="YES" >> >> at /boot/load.conf >> >> i just wanted to remove either ltmdm.ko from /boot/kernel/ >> or ltmdm_load="YES" from /boot/load.conf > > sorry for the noises. > i boot once again and go to loader prompt and then > > unload > load /boot/kernel/kernel > boot > > now that i can get rid of that harm ltmdm.ko > once again apologize me for disturbing the lists There's, really, no need to apologise. The answer you posted, the solution to a problem more common than you probably think it is (preloading or unloading modules at boot time), is very probably going to be interesting for a lot of people. Agreed, this has already been mentioned in past posts which live in the the archives now, but you get extra karma points for discovering the solution yourself *and* posting it as a followup. Thanks, that was cool :) - Giorgos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD driver for LSI Logic MegaRAID ATA
Hello! I need to install FreeBSD-4.10 (or 5.2.1) on IMB Blade HS20 (8832-21X). As far as I know, it has onboard LSI Logic MegaRAID ATA disk controller. == MegaRAID IDE BIOS ver 2.7.06021009I (C) Copyright 1999-2003, LSI Logic Corporation, USA MegaRAID IDE Adapter CSB6 found at PCI BUS No:00 Dev No:0F == (http://www-1.ibm.com/support/docview.wss?rs=0&q1=LSI&q2=LSI+MegaRAID&uid=ps g1MIGR-52765&loc=en_US&cs=utf-8&cc=us&lang=en Win2k driver is here). I could not find suitable FreeBSD driver anywhere. (amr(4) driver is not suitable) I suppose I have the same problem as described here: http://www.atm.tut.fi/list-archive/freebsd-stable/msg08328.html Please, help. BR, Oleg Vishnevsky e-mail: [EMAIL PROTECTED] tel: (095)727-0393 --- That's what's the deal we're dealin' in. --- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
usb wireless mouse prob on 5.2.1
I'm having problems getting a logitech wireless mouse working on 5.2.1 (cvsupped & updated 12 hours ago). I had this working without problem with exactly the same hardware a few weeks ago but had to reinstall, for various reasons and didn't make any copies of the configuration. It was very easy the first time... Oddly, it looks to me as though it ought to work. But it doesn't, neither in the console nor in X. I'd be grateful for any pointers. More detailed info follows. dmesg shows (all usb output included): uhci0: port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 19 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. ulpt0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 3, iclass 7/1 ulpt0: using bi-directional mode umass0: EPSON USB2.0 MFP, rev 2.00/1.00, addr 3 uhci2: port 0xd400-0xd41f irq 18 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd800-0xd81f irq 16 at device 29.3 on pci0 usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered I'm loading moused on boot through rc.conf: moused_enable="YES" moused_port="/dev/ums0" ps xa | grep moused gives: 370 ?? Is 0:00.00 /usr/sbin/moused -p /dev/ums0 -I /var/run/moused.ums0 My very basic /etc/X11/XF86Config is as follows: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice"Keyboard0" "CoreKeyboard" InputDevice"Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" # Load "freetype" # Load "xtt" Load "extmod" Load "glx" Load "dri" Load "dbe" Load "record" Load "xtrap" Load "type1" Load "speedo" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc102" Option "XkbLayout" "gb" EndSection Section "Monitor" Identifier "Monitor0" HorizSync30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Card0" Driver "mga" ChipSet "mgag400" Card"mga mgag400" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor"Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes"1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: XFree86 configure question
On Fri, 2004-06-11 at 08:05, LW Ellis wrote: > Having some difficulty setting up the XFree86 Server. > I did like it said in the handbook, but when I > ee XF86Config.new, I get a blank file. > If I use the configure tool in the sysinstall, it fails to save the file. > I am logged on as 'root' The first thing I would do before trying to configure your XFree86 Server is to find out exactly what Video card( Part 2 ) you are using. You can do this usually by going through your system message buffer from kernel startup. Edit the file /var/run/dmesg.boot and look for information which would indicate your VGA chipset, it usually starts with pci0: In some cases where your Video card is not recognised by the kernel you may need to identify the chipset in another way. Try opening the computer and looking at the chipset on the video card itself. Once you have this information you can then run the command xf86config from the command line, it is usually located in /usr/X11R6/bin. If you lucky your card will be automatically detected otherwise you will manually have to put in the options. After running through the configuration check the XF86Config file it creates and adjust if necessary to your liking. Also, take a look at the FAQ's regarding the X Window System which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/x.html Cheers, -- Nelis Lamprecht PGP: http://www.8ball.co.za/pgpkey/nelis.asc "Unix IS user friendly.. It's just selective about who its friends are." signature.asc Description: This is a digitally signed message part