Re: /tmp/security on 7.1-Release
Hello, >> Ever since upgrading from 7.0-Release to 7.1-Release I get the >> following in the daily security reports: >> >> master.lc-words.com kernel log messages: >> +++ /tmp/security.yMzCQbS8 2009-05-13 03:01:25.0 +0200 >> +re0: watchdog timeout >> +re0: link state changed to DOWN >> +re0: link state changed to UP >> >> It just happens around 3 a.m. each day and so I wonder if I should be >> concerned about it...? >> >> Thank you in advance for your suggestions! > > I can bet it's NIC related problem, probably your re0 is sharing IRQ > with something and it's going up/down. The time you see (~3.oo AM) is > the moment periodic works, so it doesn't mean the problem happend then. > > I've seen similar problems on cheap PC hardware with integrated NIC > and/or external PCI NIC (re/rl/em). Search for 're0: watchdog timeout' > on google. > > The solution is to replace re with something else - em for example, but > there is no guarantee it's going to work - I had same problems on > crappy hardware with two identical interfaces plugged in (some model of > em - IRRC Intel PRO/1000 GT) Yes, you are most likely right but I am left wondering why this has never been a problem on 7.0-Release...? So either the problem in question did not occur on 7.0 or it did occur but wasn't reported. Thanks! -- Zbigniew Szalbot ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
virtual network with qemu
Hi to all. I'd like to implement a little virtual network using QEMU 0.10.2, but, until now, I have failed. This is the situation. Host: AMD 64 running FreeBSD 7.2 #ifconfig nfe0: flags=8843 metric 0 mtu 1500 options=10b ether 00:15:f2:44:2d:f9 inet 192.168.0.2 netmask 0xff00 broadcast 192.168.0.255 media: Ethernet autoselect (100baseTX ) status: active plip0: flags=108810 metric 0 mtu 1500 lo0: flags=8049 metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 I've create an image using the FreeBSD 7.2 DVD: #qemu-img create -f qcow2 hda fbsd72.img 10G The image has been created. #qemu -L /usr/local/share/qemu/ -cdrom /dev/acd0 -m 512 -boot d fbsd72.img Alfter a long time, the installation of the guest system has been completed. When the installation program asked for information about network configuration, as a first step, I chose DHCP configuration and, as usualy, the network has been set like this: IP 10.0.2.15/255.255.255.0 gateway 10.0.2.2 nameserver 10.0.2.3 When the installation of the guest PC was finished, I've copied the image to pc01.img, to keep the original untouched. After that I've started qemu like this: #qemu -L /usr/local/share/qemu -localtime -net nic,macaddr=00:15:f2:44:2d:01 -net socket,mcast=230.0.0.1:1234 -hda pc01.img -cdrom /dev/acd0 & but the network in the guest system does not work. ifconfig in the guest system tells: #ifconfig -a ed0: flags=8843 metric 0 mtu 1500 ether 00:15:f2:44:2d:01 media: Ethernet 10baseT/UTP plip0: ... lo0: ... If I try: #ping 10.0.2.2 (the gateway) all packets are lost. For this reason, I've tryed a static IP configuration like this: IP 10.0.2.4/255.255.255.0 gateway 10.0.2.2 nameserver 10.0.2.3 but the gateway does not respond. So it is useless to try with a second guest system. Please help. Sorry for my bad english. Marco ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ipnat port-range
On Wed, May 13, 2009 at 9:09 PM, alexus wrote: > On Wed, May 13, 2009 at 12:58 PM, alexus wrote: > > i need to redirect bunch of ports, or port-range from outside to my jail > > > > # /etc/rc.d/ipnat reload > > /etc/rc.d/ipnat: DEBUG: checkyesno: ipnat_enable is set to YES. > > /etc/rc.d/ipnat: DEBUG: run_rc_command: doit: /sbin/ipnat -F -C -f > > /etc/ipnat.rules > > 0 entries flushed from NAT table > > 2 entries flushed from NAT list > > syntax error error at "port-range", line 8 > > # grep port-range /etc/ipnat.rules > > rdr bce0 0/0 port-range 49152:65534 -> lama port-range 49152:65534 tcp > > # > > > > > > > > -- > > http://alexus.org/ > > > > that rule is wrong to begin with as rdr doesn't work with ranges, i > guess I need to use something else.. > > anyone done something like that? use ipnat to map range of ports? this > is for ftp PASV > Looks like it's time to convert your rules into PF then start using PF. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Clothes make the man. Naked people have little or no influence on society." -- Mark Twain ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: source for sysinstall
El Dom 03 May 2009, Fbsd1 escribió: > How can i just download the source for sysinstall? > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscr...@freebsd.org" If you had the source installed [mar...@morena] ~> whereis sysinstall sysinstall: /usr/sbin/sysinstall /usr/share/man/en.ISO8859-1/man8/sysinstall.8.gz /usr/src/usr.sbin/sysinstall The last answer /usr/src/usr.sbin/sysinstall point to the source maps ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: scrotwm can't find
On Thu, 14 May 2009 08:54:43 + (GMT), Saifi Khan wrote: > The directory /usr/ports/Mk/ has bsd.xorg.mk file but not > bsd.prog.mk Seems to be completely normal % cd /usr/ports/Mk % ls bsd.apache.mkbsd.kde.mk bsd.port.post.mk bsd.autotools.mk bsd.kde4.mk bsd.port.pre.mk bsd.cmake.mk bsd.ldap.mk bsd.port.subdir.mk bsd.commands.mk bsd.linux-apps.mkbsd.python.mk bsd.database.mk bsd.linux-rpm.mk bsd.qt.mk bsd.destdir.mk bsd.local.mk bsd.ruby.mk bsd.efl.mk bsd.lua.mk bsd.scons.mk bsd.emacs.mk bsd.mail.mk bsd.sdl.mk bsd.fpc.mk bsd.ocaml.mk bsd.sites.mk bsd.gcc.mk bsd.octave.mkbsd.tcl.mk bsd.gecko.mk bsd.openssl.mk bsd.wx.mk bsd.gnome.mk bsd.perl.mk bsd.xfce.mk bsd.gnustep.mk bsd.php.mk bsd.xorg.mk bsd.gstreamer.mk bsd.port.mk bsd.java.mk bsd.port.options.mk > Is there a work around ? Yes, there is some work around. :-) Maybe you can pull the file needed from some other location on your system: % locate bsd.prog.mk /usr/share/mk/bsd.prog.mk /usr/src/share/mk/bsd.prog.mk /usr/src/tools/build/mk/bsd.prog.mk As far as I know, FreeBSD keeps its .mk files in /usr/share/mk/, evem for tjhe ports system. % ls bsd.README bsd.kmod.mk bsd.port.post.mk bsd.compat.mkbsd.lib.mk bsd.port.pre.mk bsd.cpu.mk bsd.libnames.mk bsd.port.subdir.mk bsd.dep.mk bsd.links.mk bsd.prog.mk bsd.doc.mk bsd.man.mk bsd.snmpmod.mk bsd.endian.mkbsd.nls.mk bsd.subdir.mk bsd.files.mk bsd.obj.mk bsd.symver.mk bsd.incs.mk bsd.own.mk bsd.sys.mk bsd.info.mk bsd.port.mk sys.mk bsd.init.mk bsd.port.options.mk version_gen.awk If they aren't there (maybe due to a defective install / upgrade procedure), you can get them from the source tree. # cd /usr/src/share/mk # make install -- Polytropon >From Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
On Wed, 13 May 2009, Sean Cavanaugh wrote: > -- > From: "Saifi Khan" > Sent: Wednesday, May 13, 2009 9:04 PM > To: "Sean Cavanaugh" > Cc: ; ; > Subject: RE: Welcome to the "freebsd-questions" mailing list > > > On Wed, 13 May 2009, Sean Cavanaugh wrote: > > > > > > > > (The true nomenclature is GNU/Linux when refering to a Linux based OS). > > > > Not true. > > > > Please see > > http://en.wikipedia.org/wiki/GNU/Linux_naming_controversy > > > > > > thanks > > Saifi. > > > > based on the wiki page (which we ALL know is NEVER wrong) states that > GNU/Linux is the correct form and the ONLY reason for calling it just Linux is > that its easier to say and that's how its known overall in mainstream media. based on Linus Torvalds (which we ALL know is RIGHT) states that when asked if the name GNU/Linux was justified: Well, I think it's justified, but it's justified if you actually make a GNU distribution of Linux ... the same way that I think that "Red Hat Linux" is fine, or "SuSE Linux" or "Debian Linux", because if you actually make your own distribution of Linux, you get to name the thing, but calling Linux in general "GNU Linux" i I think is just ridiculous. (G)ot (N)othing (U)nique takes years since 1989 for http://is.gd/zGZh Hope this helps. thanks Saifi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Wake-on-LAN support in FreeBSD?
On Wed, May 13, 2009 at 5:47 AM, Ruben de Groot wrote: > On Tue, May 12, 2009 at 06:36:31AM -0700, Peter Steele typed: > > > FUD, read ifconfig(8) > > > > There is no mention of wake-on-LAN in the man page for ifconfig in 7.0. > I'd be interested in seeing if the 8.0 man page has added anything. > > It has: > > wol, wol_ucast, wol_mcast, wol_magic > Enable Wake On Lan (WOL) support, if available. WOL is a > facil- > ity whereby a machine in a low power state may be woken in > response to a received packet. There are three types of > packets > that may wake a system: ucast (directed solely to the machine's > mac address), mcast (directed to a broadcast or multicast > address), or magic (unicast or multicast frames with a ``magic > contents''). Not all devices support WOL, those that do > indicate > the mechanisms they support in their capabilities. wol is a > syn- > onym for enabling all available WOL mechanisms. To disable WOL > use -wol. > > Ruben > I just noticed my 7.2-R i386 PC-Engines ALIX2 board with vr devices show up (WOL_UCAST,WOL_MAGIC) in the ifconfig listing. Seems they're making some of it available in 7.2-RELEASE I'll have to test/try this out, I'm glad I'm starting to see it happen. Thought you'd all like to know. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Opera: X Shared memory extension is not available. ZPixmap not supported
Hi all: Running Opera 9.64 on X.org 7.4 leads to freeze ups in Opera. The error reported is Opera: X Shared memory extension is not available. ZPixmap not supported My system is Intel CeleronM 1.6GHz, Intel 945GM mobo. Some of the blogs seem to suggest that the new driver shipped has fixed the issue. Does anybody know ? Is there a recommended work around ? thanks Saifi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
scrotwm can't find
Hi: Trying to compile scrotwm (from OpenBSD ports) http://www.peereboom.us/scrotwm/html/scrotwm.html on my FreeBSD 8.x 200905 i386 system. and make can't find .include .include The directory /usr/ports/Mk/ has bsd.xorg.mk file but not bsd.prog.mk Is there a work around ? thanks Saifi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Errors Installing ca_root_nss Port
I'm using FBSD 6x. It's been a while since I upgraded ports. One of the ports to upgrade is curl from 7.18.0 to 7.19.4. It wants to pull in security/ca_root_nss. This port gets a bunch of errors when attempting to install. Here is an example: Error configuring OpenSSL 40358:error:260AB089:engine routines:ENGINE_ctrl_cmd_string:invalid cmd name:/usr/src/secure/lib/libcrypto/../../../crypto/openssl/crypto/engine/eng_ctrl.c:318: 40358:error:0E07406D:configuration file routines:CONF_modules_load:module initialization error:/usr/src/secure/lib/libcrypto/../../../crypto/openssl/crypto/conf/conf_mod.c:234:module=engines, value=openssl_engines, retcode=-1 I had been using openssl from the base system but tried installing from ports (0.9.8k) to see if it helped. It did not. Should I leave or remove openssl from ports? If I leave it, is there anything I need to do so it does not conflict with the base system? And regarding ca_root_nss, what must I do to get that installed? Thanks, Drew -- Be a Great Magician! Visit The Alchemist's Warehouse http://www.alchemistswarehouse.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Keyboard not working in gnome?
Hi, i'm currently debugging why my keyboard is not working in gnome, so i thought i might throw out a quick question here if someone else have run into this? Details: Im running 7.1-STABLE. It's a logitech wireless keyboard and mouse (connected with USB) that have been woriking for a couple of years. (Actually i'm writing on it now, but in a vty) Suddenly in the middle of a session everything hung, so i rebooted. Now i managed to login (That is it works in gdm!) but when i open a xterm or any other program it does not work. (as in no keys work not even caps lock) The mouse works perfectly. And since the mouse works i can use the GUI to logout and back in gdm keyboard works again... My first thought was that i might have rebuilt some port affecting this, so currently i'm rebuilding X11 and gnome. Have anyone else run into this? Any hints on what might be wrong? /Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: BGP
Michael K. Smith - Adhost wrote: >> is there a way to have FreeBSD work as BGP router and/or at least >> failover between 2 different ISPs? >> > I, as some random guy on the Internet, would recommend Quagga and, yes, it > will work with 2+ ISP's on single device (server). It's well established and > in use for transit-facing Internet connections. I, also as some random guy on the Internet, concur with Mike. I've got numerous FreeBSD/Quagga boxes that have dozens of BGP sessions, peering and transit. The primary reason I chose Quagga was it's similarity with Cisco in regards to the CLI (and it works with RANCID). If you want true failover between two ISPs, you want BGP. Steve smime.p7s Description: S/MIME Cryptographic Signature
Re: How to move vi to /bin
On Wed, 13 May 2009 05:34:43 -0400, Michael Powell wrote: > Yes - use the /rescue/vi as it has been statically compiled so it does not > rely on dynamic libraries which may not be available. The purpose here is > have a fallback position for repairing a damage/problem which may prevent a > successful mount of /usr. In addition, you eventually want to do something about the termcap files that - at least I think - vi needs to run in a usable manner. The default is /etc/termcap@ -> /usr/share/misc/termcap - and in a "worst case scenario" /usr is out of reach. You can copy the file /usr/share/misc/termcap to /etc, run "cap_mkdb /etc/termcap" and then have /etc/termcap and /etc/termcap.db, which you can then symlink to /usr/share/misc/termcap and /usr/share/misc/termcap.db again. But note that this might lead to interferences with the freebsd-update tool as well as with the canonical way of updating the system through "make update" and "make build/install kernel/world". -- Polytropon >From Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Reformatting external harddrive
On Tue, 12 May 2009 22:04:35 -0400, Daniel Underwood wrote: > According to the newfs manpages, you can specify a filesystem type > (-O) and a disktype (-T) for "backward compatibility." It further > appears that -O can only designate either UFS1 or UFS2. I don't quite > know what the -T option designates; i.e., back compatible with "what"? The -O 2 (default) would be the best solution I think. UFS2 is the standard in FreeBSD. And yes, I forgot to mention this: After formatting the drive, you will surely want to enable soft updates. Use the command # tunefs -n enable /dev/da0 to do this. Refer to "man tunefs" for more information, for example if you wish to set minfree to another than the default value, or the optimization for either space or time. The -T is mentioned in /usr/src/sbin/newfs/newfs.c line 388 cont. and of course in the getopt() selector at the beginning of the newfs program. > (I ask about the -O and -T options becase I would like to use this > harddrive on both my FreeBSD and my linux machine.) I'm not sure if Linux is able to use UFS... (I don't use Linux, so I really can't tell.). -- Polytropon >From Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
On 23:59 Wed 13 May , Maciej Milewski wrote: > Wednesday 13 May 2009 23:15:46 napisałeś(-łaś): > > On 22:04 Wed 13 May , Maciej Milewski wrote: > > > Wednesday 13 May 2009 19:50:51 Gabri Mate napisał(a): > > > > It seems that the problem is related to Squirrelmail, particularly to > > > > the file attaching process. Every time a certain account tries to > > > > upload an attachement the above described happens. I'm absolutely sure > > > > that the problem is not FreeBSD related. Something with Squirrelmail or > > > > with the account is wrong. I'm trying to figure this out. > > > > > > Is there any chance that you are using lighttpd as your web server? > > > > You bet! I'm using the latest one from ports. I've turned off file > > uploading in php to see what happens in the coming days. Is there > > something with lighttpd regarding this problem? > > > > Thank You! > :) > You should set this in lighttpd.conf: > server.network-backend = "write" > I don't have right now link for info why this should be set this way but if > memory serves me right it is specific for FreeBSD because of problem with > sendfile working differently or not working at all. You should find some info > on lighttpd bugs page. I've found this link describing exactly what i was experiencing. http://lists.freebsd.org/pipermail/freebsd-questions/2008-September/182872.html I hope that the problem will go away. :) > > -- > Pozdrawiam, > Maciej Milewski > > > !DSPAM:117,4a0b42ba83011575916308! -- Gabri Mate ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
On 23:59 Wed 13 May , Maciej Milewski wrote: > Wednesday 13 May 2009 23:15:46 napisałeś(-łaś): > > On 22:04 Wed 13 May , Maciej Milewski wrote: > > > Wednesday 13 May 2009 19:50:51 Gabri Mate napisał(a): > > > > It seems that the problem is related to Squirrelmail, particularly to > > > > the file attaching process. Every time a certain account tries to > > > > upload an attachement the above described happens. I'm absolutely sure > > > > that the problem is not FreeBSD related. Something with Squirrelmail or > > > > with the account is wrong. I'm trying to figure this out. > > > > > > Is there any chance that you are using lighttpd as your web server? > > > > You bet! I'm using the latest one from ports. I've turned off file > > uploading in php to see what happens in the coming days. Is there > > something with lighttpd regarding this problem? > > > > Thank You! > :) > You should set this in lighttpd.conf: > server.network-backend = "write" > I don't have right now link for info why this should be set this way but if > memory serves me right it is specific for FreeBSD because of problem with > sendfile working differently or not working at all. You should find some info > on lighttpd bugs page. I'll search for it. It was set to "freebsd-sendfile", and I've changed it as You've suggested. Thank You for the information! > > -- > Pozdrawiam, > Maciej Milewski > > > !DSPAM:117,4a0b42ba83011575916308! -- Gabri Mate ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: FreeBSD 8.0 i386 200905 snapshot DVD does not boot
On May 10, 2009, at 15:45 , Saifi Khan wrote: Hi all: The FreeBSD 8.0 i386 200905 snapshot DVD does not boot up. I'm on a normal Celeron 1.6GHz Presario C300TU laptop with 160GB HDD and 2GB DDR2 RAM. The system just whirrs up the DVD drive, the LEDs blink for a few moments and then the installed FreeBSD 7.1 screen is presented. I tested the DVD drive by putting in the old FreeBSD 7.1 DVD and it works fine. As an additional investigation i wrote another DVD with -J -R flags (unnecessary though in my opinion) and even this DVD does not get booted up. The first thing i did was do a md5sum on the downloaded .ISO image and that is fine. Has anybody tried FreeBSD 8.0 i386 200905 DVD and could get it to boot ? Is there something that i'm missing here ? Any pointers are appreciated. Hi, I believe I had a similar problem, though I don't know how the DVD image was burned as it was handed to me by a friend. I was trying to install the amd64 8.0 image for 200905 and during boot my laptop, a Thinkpad X60 (T7200 Core Duo) would simply freeze up. I was able to install by burning a CDROM image of the first iso. The CDROM installed fine and that system is now up and running. Best, George ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
On 22:29 Wed 13 May , Mel Flynn wrote: > On Wednesday 13 May 2009 19:46:26 Gabri Mate wrote: > > On 19:57 Tue 12 May , Mel Flynn wrote: > > > On Sunday 10 May 2009 20:51:48 mailingl...@modernbiztonsag.org wrote: > > > > Dear List, > > > > > > > > I've upgraded from source my 7.0-RELEASE to 7.1-RELEASE. It's a general > > > > purpose server for a small company and it's clients, running web, sql, > > > > mail and recursive dns. The machine is a Compaq ML350 G2. Version 7.0 > > > > was running on it for a year now without any problem. After 30 of April > > > > I've upgraded to 7.1 (I've followed the handbook) and since then nearly > > > > every two day the machine becomes unreachable except for echorequest. > > > > If i try to log in in the terminal it just hangs after i give my > > > > password. > > > > > > > > I'm out of any ideas. Please feel free to ask any more info that I've > > > > forgotten to provide. Thank You for your help in advance. > > > > > > If this is a not a GENERIC kernel, did you change scheduler or stuck with > > > SCHED_4BSD in your kernel? > > > > I've just added PF related stuff, so the scheduler is remained the > > default. > > Just FYI: unless you use include GENERIC and added pf, rather then copy > GENERIC to MYKERNEL, you're running with SCHED_4BSD, the default has changed > in 7.1. Hm, You've got the point. I've just copied over the kernel config from 7.0 to 7.1, made a diff with GENERIC but somehow I've missed the scheduler change. I'm building a new kernel now. Could this be related with the Squirrelmail problem I've posted earlier? > -- > Mel > > !DSPAM:117,4a0b2dc183011557416561! > -- Gabri Mate ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
RE: BGP
> > is there a way to have FreeBSD work as BGP router and/or at least > failover between 2 different ISPs? > I, as some random guy on the Internet, would recommend Quagga and, yes, it will work with 2+ ISP's on single device (server). It's well established and in use for transit-facing Internet connections. Regards, Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: BGP
look at ports index there are BGP deamons On Wed, 13 May 2009, alexus wrote: is there a way to have FreeBSD work as BGP router and/or at least failover between 2 different ISPs? -- http://alexus.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: BGP
On Wed, May 13, 2009 at 13:27, alexus wrote: > is there a way to have FreeBSD work as BGP router and/or at least > failover between 2 different ISPs? While I have yet to work with either, I know that xorp and quagga will both do BGP. Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
-- From: "Saifi Khan" Sent: Wednesday, May 13, 2009 9:04 PM To: "Sean Cavanaugh" Cc: ; ; Subject: RE: Welcome to the "freebsd-questions" mailing list On Wed, 13 May 2009, Sean Cavanaugh wrote: (The true nomenclature is GNU/Linux when refering to a Linux based OS). Not true. "Please give us the credit for userland" is the line of reasoning used for the puported TLA prefix ! silly actually. Please see http://en.wikipedia.org/wiki/GNU/Linux_naming_controversy thanks Saifi. based on the wiki page (which we ALL know is NEVER wrong) states that GNU/Linux is the correct form and the ONLY reason for calling it just Linux is that its easier to say and that's how its known overall in mainstream media. There is additional in that it also runs non-GNU based programs such as apache, but the base of it all is that Linux by itself is not an OS, just a kernel. Debian Illustrates this perfectly as they have done several different distros using different Kernels to run GNU userland, including FreeBSD ( http://www.debian.org/ports/kfreebsd-gnu/ ), NetBSD, and Hurd. -Sean ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
On Wednesday 13 May 2009 19:46:26 Gabri Mate wrote: > On 19:57 Tue 12 May , Mel Flynn wrote: > > On Sunday 10 May 2009 20:51:48 mailingl...@modernbiztonsag.org wrote: > > > Dear List, > > > > > > I've upgraded from source my 7.0-RELEASE to 7.1-RELEASE. It's a general > > > purpose server for a small company and it's clients, running web, sql, > > > mail and recursive dns. The machine is a Compaq ML350 G2. Version 7.0 > > > was running on it for a year now without any problem. After 30 of April > > > I've upgraded to 7.1 (I've followed the handbook) and since then nearly > > > every two day the machine becomes unreachable except for echorequest. > > > If i try to log in in the terminal it just hangs after i give my > > > password. > > > > > > I'm out of any ideas. Please feel free to ask any more info that I've > > > forgotten to provide. Thank You for your help in advance. > > > > If this is a not a GENERIC kernel, did you change scheduler or stuck with > > SCHED_4BSD in your kernel? > > I've just added PF related stuff, so the scheduler is remained the > default. Just FYI: unless you use include GENERIC and added pf, rather then copy GENERIC to MYKERNEL, you're running with SCHED_4BSD, the default has changed in 7.1. -- Mel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
BGP
is there a way to have FreeBSD work as BGP router and/or at least failover between 2 different ISPs? -- http://alexus.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ndis0 interrrupt storm
Paul B. Mahol wrote: On 5/12/09, Chris Whitehouse wrote: Paul B. Mahol wrote: Just typing bt on db prompt for now should be enough. panic: sleeping thread cpuid = 0 KDB: enter: panic [thread pid 1497 tid 100073 ] Stopped atkdb_enter+0x3a: movl$0,kdb_why db> bt Tracing pid 1497 tid 100073 td 0xc356c900 kdb_enter(c0c3d8fa,c0c3d8fa,c0c42726,d4001b68,0,...) at kdb_enter+0x3a panic(c0c42726,,0,cc,4,...) at panic+0x136 propagate_priority(c0d9df84,0,c0c4249e,2e1,c356d180,...) at propagate_priority+0x18c turnstile_wait(c356d180,c37b2240,0,18d,c34fc06c,...) at turnstile_wait+0x44d _mtx_lock_sleep(c34fc06c,c356c900,0,c38de072,6b4,...) at mtx_lock_sleep+0x18e _mtx_lock_flags(c34fc06c,0,c38de072,6b4,c089dc98,...) at mtx_lock_flags+0xf7 ndis_ticktask(c3821700,c34fc000,c37e8e3c,c3916bd0,c38fc6e0,...) at ndis_ticktask+0x3a _end(c37e8e3c,d4001d38,c0c39438,333,c37ab548,...) at _end+0x321d fork_exit(c38fc600,c37e8e3c,d4001d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip = 0 esp = 0xd4001d70, ebp = 0 --- Typed by hand but I'm pretty sure it is correct. Don't know if it is significant but repeating the panic gave quite a few different values. Post them too. If only numbers are different and stack is same that could help even more. Is photos ok or do you need text? This is on i386? yes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Reading warnings when installing multiple ports
On Tuesday 12 May 2009 21:04:57 Glen Barber wrote: > On Tue, May 12, 2009 at 1:53 PM, Mel Flynn > > wrote: > > On Monday 11 May 2009 15:21:24 Jerry McAllister wrote: > >> But, I very often wish there was a convenient way to see some of those > >> messages and especially messages about things one has to do during > >> the install, such as manually installing something or getting some > >> license thing handled, before I start the port install. > >> > >> Sometimes I get a question in the middle of an install that I do not > >> know how to answer and it is an awfully inconvenient time to have > >> to start scrounging for information.Having a commannd that > >> would display all those things and maybe some related information > >> or pointers to information for making an intelligent response - before > >> starting the make - would be very helpful. > > > > Do you have specific examples? Cause I can't think of anything that falls > > under your description. > > Perhaps he is talking about the 'make options' output, such as what is > displayed right before x11-wm/fluxbox begins to build. That is the > only type of output I can ever remember seeing before a build begins. Well, there's "would you like to activate postfix in mailer.conf [y/n]", but that never triggered me to scrounge for info and can be handled by -DBATCH and setting POSTFIX_DEFAULT_MTA in /etc/make.conf (or not setting it if you don't wanna). -- Mel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: subversion / dav_svn_module : Fatal error 'Recurse on a private mutex.'
Hi Olivier, On Wednesday 13 May 2009 19:32:36 Olivier Mueller wrote: > > > ==> /var/log/httpd/httpd-error.log <== > > > Fatal error 'Recurse on a private mutex.' at line 986 in file > > > /usr/src/lib/libpthread/thread/thr_mutex.c (errno = 86) [Tue May 12 > > > 11:56:02 2009] [notice] child pid 64353 exit signal Abort trap (6) > > > > > > > > > The only difference between both repositories is the db/format file: > > > > > > diff -r repos/websites/testing/db/format > > > repos/websites/testing2/db/format 1c1 > > > < 4 > > > --- > > > > > > > 3 > > > > > > If format is "3" (subversion "pre-1.6"), everything works fine, but if > > > the format is "4" the DAV/SVN part crashes (while everything remains > > > fine via svn client / svnserve). > > > > this is with the same binary? Meaning there's no Berkeley db library > > differences? > > Yes, the only recent change was a "portupgrade -rvbp subversion". I'm still thinking there's two different (threading|bdb) libraries linked into httpd, but not sure to ask for which ldd...httpd or mod_dav. The db version could be a red herring or that only one of the formats requires this mutex . -- Mel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to move vi to /bin
On Wednesday 13 May 2009 11:34:43 Michael Powell wrote: > Kind of like how those coming over from a > Linux environment all seem to want to change root's shell to bash, it > serves no purpose except foot-shooting. - csh cannot redirect stderr seperately from stdout - on pipes the exit status from the first command is the exit status of the total command - will not expand matches without a user provided part, for *every* component of a path There's plenty of reasons not to use csh and if you know what you're doing, BSD lets you. And no, I don't want to type exec zsh when I'm finally logged into the box that has a load of 100+. -- Mel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ghostscript8 - errors when compiling from ports
> Here's the thing: Ghostscript has a hidden (and apparently broken) > dependency on cups (ie, it's not in the Makefile). If you (forcibly) > deinstall cups-base and cups-client, you will be able to install > ghostscript cleanly. Then when that succeeds, you reinstall cups-client > (first) and then cups-base. > > Hope that helps. Thank you very much :-) Now is OK. Zbigniew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
Wednesday 13 May 2009 19:50:51 Gabri Mate napisał(a): > It seems that the problem is related to Squirrelmail, particularly to > the file attaching process. Every time a certain account tries to upload > an attachement the above described happens. I'm absolutely sure that the > problem is not FreeBSD related. Something with Squirrelmail or with the > account is wrong. I'm trying to figure this out. Is there any chance that you are using lighttpd as your web server? -- Regards, Maciej Milewski ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: /tmp/security on 7.1-Release
"Zbigniew Szalbot" wrote: > Hello, > > Ever since upgrading from 7.0-Release to 7.1-Release I get the > following in the daily security reports: > > master.lc-words.com kernel log messages: > +++ /tmp/security.yMzCQbS82009-05-13 03:01:25.0 +0200 > +re0: watchdog timeout > +re0: link state changed to DOWN > +re0: link state changed to UP > > It just happens around 3 a.m. each day and so I wonder if I should be > concerned about it...? > > Thank you in advance for your suggestions! I can bet it's NIC related problem, probably your re0 is sharing IRQ with something and it's going up/down. The time you see (~3.oo AM) is the moment periodic works, so it doesn't mean the problem happend then. I've seen similar problems on cheap PC hardware with integrated NIC and/or external PCI NIC (re/rl/em). Search for 're0: watchdog timeout' on google. The solution is to replace re with something else - em for example, but there is no guarantee it's going to work - I had same problems on crappy hardware with two identical interfaces plugged in (some model of em - IRRC Intel PRO/1000 GT) -- regards, Maciej Suszko. signature.asc Description: PGP signature
RE: Welcome to the "freebsd-questions" mailing list
On Wed, 13 May 2009, Sean Cavanaugh wrote: > > (The true nomenclature is GNU/Linux when refering to a Linux based OS). Not true. "Please give us the credit for userland" is the line of reasoning used for the puported TLA prefix ! silly actually. Please see http://en.wikipedia.org/wiki/GNU/Linux_naming_controversy thanks Saifi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
FreeBSD 7.1 as client into EMC Clarlion CX4?
EMC says they don't support FreeBSD. Anybody have recent experience? Which version of FreBSD? Which 4 Gbit fiber-channel cards? Going into the fiber channel 4 Gb/s optical ports with "FCP SCSI-3" protocol? Going into the Ethernet 1 Gb/s copper ports? ie, FreeBSD/iSCSI Initiator into CX4 iSCSI target? We will have CX4 also "fronted" with a Cisco 9124. What about FreeBSD connectivity (card/drivers) for talking to 9124? thanks, Len ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: howto sidestep sysinstall during installation
On Mon, 11 May 2009, Vincent Hoffman wrote: > > > > Is there a way to sidestep the sysinstall during the > > > installation process, beyond selecting the 'location' ? > > > > > > > > Since you are using the snapshot DVD you should have the live/fixit > > environment which is very handy for this. > > I would suggest a combination of LOTS of reading and understanding of > > the pages at > > http://typo.submonkey.net/articles/2006/04/13/installing-freebsd-on-usb-stick-episode-2 > > (which goes though the steps for partitoning and installing using fdisk > > and bsdlabel, adjust paths to your dvd-rom) Thanks Vince for the link that was a nice starting point. Thanks to everybody who chipped in with pointers and help with learning the various concepts. Using the Fixit# console (LiveDVD) i could install FreeBSD 200905 snapshot (bypassed the sysinstall). i plan to write an article on the experience shortly. Since then, i've installed the following software: . xorg X 7.4 meta port (complete) . postgresql 8.3.7 . apache 2.2.11 . diablo-jdk 1.6.0 . opera 9.64 . dwm + many others. There were two errors/quirks that i noticed. http://www.flickr.com/photos/saifi/sets/72157618010835543/ 1. crash encountered while running sysinstall from the booted up system. 2. same crash encountered while running 'make fetch' for many of the ports. (rather random in occurence). Anybody encountered this issue ? thanks Saifi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
On Wed, May 13, 2009 at 08:26:10AM -0700, Steve Kargl wrote: > > Also, thanks, everyone for the tip about screen. Don't forget tmux. -- Chad Perrin [ original content licensed OWL: http://owl.apotheon.org ] Quoth Colin McFadyen: "Unix is not an 'a-ha' experience, it is more of a 'holy-shit' experience." pgpYIUsuSZvfM.pgp Description: PGP signature
Re: ghostscript8 - errors when compiling from ports
On Wed, May 13, 2009 at 05:54:09PM +0200, Zbigniew Komarnicki wrote: > On Wednesday 13 of May 2009 12:08:55 you wrote: > > > just a guess, looks like a problems with cups-base, try to update it first. > > I recommend ports-mgmt/portmaster. > > Thank you for help :-) > > I upgraded all my installed ports, by > # portmaster -a > > but this error still remain. I also reinstall the cups-base port by > # portmaster -rf print/cups-base > > but still with no success. Here is the output: > Here's the thing: Ghostscript has a hidden (and apparently broken) dependency on cups (ie, it's not in the Makefile). If you (forcibly) deinstall cups-base and cups-client, you will be able to install ghostscript cleanly. Then when that succeeds, you reinstall cups-client (first) and then cups-base. Hope that helps. -- Jonathan Chen -- Do not take life too seriously. You will never get out of it alive. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Repeatable X lockups
On 5/13/09, Jimmie James wrote: > Jimmie James wrote: >>> When using the xv output driver for vlc or mplayer, X will lockup, crash >>> instantly, trashing the screen and forcing a reboot >>> Image of screen corruption: >>> http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg > > William Bulley wrote: >>I have experienced the same problem, but I didn't see any suggestions >>or answers to your posting. Have you had any success yet with this? >>Have you tried any other output drivers? This is something I plan to >>try in the next few days. > >>My system is i386 with Intel 915 graphics on the motherboard. Xorg 7.4 >>runs fine. When I run mplayer from the command line, in an xterm under >>open-motif, the X Windows session dies and I am tossed back to the vty. > > > > Halp? The x11 output driver sucks when trying to watch something full > screen. > > With the latest (in ports) xf86-video-intel-2.7.1, first time with xv it > was fine, flipped to a console then back to X, and ran mplayer with xv, > lockup/Xcrash, > ssh'd into my box, and for the hell of it, ran startx, and it worked, I > was back in X, but the console was still buggered as the picture in the > link above shows. > I could kill X, but the console was buggered, locked, ssh would allow me > to restart X as many times as I wished. One thing to note, I dont switch to console while DRI is active otherwise panic could happen(last time when I tested it with 915GM). > All that's in /var/log/messages is May 13 11:19:35 jimmiejaz kernel: > pid 65663 (Xorg), uid 0: exited on signal 6 > Unfortunatly, Xorg log doesn't have anything, as I restarted X over ssh > several times, the only thing there, is when trying to startx a lot of > times, the first attempt can't find any screens with a usable > configuration, ^c then startx again works just fine. > > (WW) intel(0): drmDropMaster failed: Unknown error: -1 > (II) intel(0): [drm] removed 1 reserved context for kernel > (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000 > (II) intel(0): [drm] Closed DRM master. > > > xrandr > Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600 > VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) > 306mm x 230mm > 1600x1200 65.0* > > vgap...@pci0:0:2:0: class=0x03 card=0x25821043 chip=0x25828086 > rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = '82915G/GV/GL, 82910GL Integrated Graphics Device' > class = display > subclass = VGA > > grep vga /var/run/dmesg.boot > vgapci0: port 0x6800-0x6807 mem > 0xcfd8-0xcfdf,0xd000-0xdfff,0xcfe8-0xcfeb at > device 2.0 on pci0 > agp0: on vgapci0 > drm0: on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > vgapci1: mem 0xcfe0-0xcfe7 at device > 2.1 on pci0 > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 > vgapci0: port 0x6800-0x6807 mem > 0xcfd8-0xcfdf,0xd000-0xdfff,0xcfe8-0xcfeb at > device 2.0 on pci0 > agp0: on vgapci0 > drm0: on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > vgapci1: mem 0xcfe0-0xcfe7 at device > 2.1 on pci0 > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 > > > > -- > Over the years I've come to regard you as people I've met. > > ___ > freebsd-multime...@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to > "freebsd-multimedia-unsubscr...@freebsd.org" > That is same corrupted screen output I was experiencing with older server and mesa. And only when zapping Xorg. Somehow small change somewhere "fixed" that problem for me, actually everything points to some timeing issue. It's hard to say if this is FreeBSD DRM issue or X11(mesa or server) problem. I could put console into somehow not perfect but still usable conditon if I started X11 again using vesa driver. -- Paul ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
On 5/13/09, Shakil Khan wrote: > Can anyone let me know how can I download FreeBSD kernel source code. 1. Surf to http://freebsd.org. 2. Notice that there are now two flavors of FreeBSD: LATEST RELEASES * Production Release 7.2 * Production (Legacy) Release 6.4 3. Click on 'Documentation' and then 'Handbook'. 4. Scroll down to the table of contents of 'Appendix A. Obtaining FreeBSD' and review these possibilities. I suggest you try CVSup. There are CVSup clients available for virtually all Unixen systems, including Linux. NB. Now, read carefully the section on CVSup: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html You can grab whatever source you want with this method. 5. RTFM! -- Duane ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: subversion / dav_svn_module : Fatal error 'Recurse on a private mutex.'
If you don't find an answer here, I suggest asking this question in the freebsd-hpc mailing list, because pthreads is a library for c/c++ multithreaded programming, and a "mutex" is a kind of lock on a resource used in parallel programming. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
make.conf options based on DESTDIR?
I have setup several jails that use a master template similar to the advanced jail configuration in the handbook. Currently, I build the master jail with several build options turned off using a separate make.conf file and setting __MAKE_CONF to it. I was wondering if there is a way to set /etc/make.conf up so that if DESTDIR is set to the master jail location, make would use those options but not use them during a standard build process with DESTDIR not defined or pointed somewhere else. I have read through the man pages on make and make.conf, and have tried: .if DESTDIR=/usr/Jail/master WITHOUT_ACPI=YES WITHOUT_BOOT=YES ... .endif But it does not seem to work correctly. Any ideas if this is possible. Would make it easier to rebuild the jail template since I wouldn't need to remember to set __MAKE_CONF. Any help would be appreciated. David Wassman, MCSA MCP Net+ Security+ Senior Network\System Administrator Davis, Monk & Company (800) 344-5034 (352) 372-6300 (352) 375-1583 FAX The information contained in this electronic message is legally privileged and confidential under applicable law, and is intended only for the use of the individual or entity named above. If you are not the intended recipient, you are hereby notified that any dissemination, copying or disclosure of this communication is strictly prohibited. If you have received this communication in error, please notify Davis, Monk & Company (352) 372-6300 and delete this communication immediately without reading it, making any copies of it or distributing it. P Please keep this email paperless ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ipnat port-range
On Wed, May 13, 2009 at 12:58 PM, alexus wrote: > i need to redirect bunch of ports, or port-range from outside to my jail > > # /etc/rc.d/ipnat reload > /etc/rc.d/ipnat: DEBUG: checkyesno: ipnat_enable is set to YES. > /etc/rc.d/ipnat: DEBUG: run_rc_command: doit: /sbin/ipnat -F -C -f > /etc/ipnat.rules > 0 entries flushed from NAT table > 2 entries flushed from NAT list > syntax error error at "port-range", line 8 > # grep port-range /etc/ipnat.rules > rdr bce0 0/0 port-range 49152:65534 -> lama port-range 49152:65534 tcp > # > > > > -- > http://alexus.org/ > that rule is wrong to begin with as rdr doesn't work with ranges, i guess I need to use something else.. anyone done something like that? use ipnat to map range of ports? this is for ftp PASV -- http://alexus.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: subversion / dav_svn_module : Fatal error 'Recurse on a private mutex.'
Hi Mel, On Tue, 2009-05-12 at 17:25 +0200, Mel Flynn wrote: > > I have a strange situation on our internal svn server. Since a few days > > and some upgrades, if I try to access a new created repository via > > apache, I get a blank page and this error in the apache error log: > > > > ==> /var/log/httpd/httpd-error.log <== > > Fatal error 'Recurse on a private mutex.' at line 986 in file > > /usr/src/lib/libpthread/thread/thr_mutex.c (errno = 86) [Tue May 12 > > 11:56:02 2009] [notice] child pid 64353 exit signal Abort trap (6) > > > > > > The only difference between both repositories is the db/format file: > > > > diff -r repos/websites/testing/db/format repos/websites/testing2/db/format > > 1c1 > > < 4 > > --- > > > > > 3 > > > > If format is "3" (subversion "pre-1.6"), everything works fine, but if > > the format is "4" the DAV/SVN part crashes (while everything remains > > fine via svn client / svnserve). > > this is with the same binary? Meaning there's no Berkeley db library > differences? Yes, the only recent change was a "portupgrade -rvbp subversion". regards, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 7.0 -> 7.1 crash every two day
On 20:51 Sun 10 May , mailingl...@modernbiztonsag.org wrote: > Dear List, > > I've upgraded from source my 7.0-RELEASE to 7.1-RELEASE. It's a general > purpose server for a small company and it's clients, running web, sql, mail > and recursive dns. The machine is a Compaq ML350 G2. Version 7.0 was > running on it for a year now without any problem. After 30 of April I've > upgraded to 7.1 (I've followed the handbook) and since then nearly every > two day the machine becomes unreachable except for echorequest. If i try to > log in in the terminal it just hangs after i give my password. > > I'm out of any ideas. Please feel free to ask any more info that I've > forgotten to provide. Thank You for your help in advance. It seems that the problem is related to Squirrelmail, particularly to the file attaching process. Every time a certain account tries to upload an attachement the above described happens. I'm absolutely sure that the problem is not FreeBSD related. Something with Squirrelmail or with the account is wrong. I'm trying to figure this out. > > Here's the dmesg: > > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RELEASE-p5 #2: Fri Apr 24 18:44:13 CEST 2009 > r...@lildevil.datawlan:/usr/obj/usr/src/sys/FIREWALL > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Pentium III (996.85-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff > real memory = 536854528 (511 MB) > avail memory = 511340544 (487 MB) > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or > length:0 0/2 [20070320] > acpi0: on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > unknown: I/O range not supported > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 > pcib0: on acpi0 > pci_link0: apparently invalid index 0 > pci0: on pcib0 > sym0: <1510d> port 0x2000-0x20ff mem > 0xc6effc00-0xc6ef,0xc6efe000-0xc6efefff irq 10 at device 1.0 on pci0 > sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym0: [ITHREAD] > sym1: <1510d> port 0x2400-0x24ff mem > 0xc6efdc00-0xc6efdfff,0xc6efc000-0xc6efcfff irq 11 at device 1.1 on pci0 > sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym1: [ITHREAD] > fxp0: port 0x2800-0x283f mem > 0xc6efb000-0xc6efbfff,0xc6d0-0xc6df irq 15 at device 2.0 on pci0 > miibus0: on fxp0 > inphy0: PHY 1 on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:50:8b:ee:d2:d6 > fxp0: [ITHREAD] > vgapci0: port 0x2c00-0x2cff mem > 0xc500-0xc5ff,0xc6cff000-0xc6cf at device 3.0 on pci0 > pci0: at device 4.0 (no driver attached) > isab0: at device 15.0 on pci0 > isa0: on isab0 > atapci0: port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3000-0x300f at device 15.1 on pci0 > ata0: on atapci0 > ata0: [ITHREAD] > ata1: on atapci0 > ata1: [ITHREAD] > pcib1: on acpi0 > pci3: on pcib1 > ida0: port 0x4000-0x40ff mem > 0xc6fff000-0xc6ff irq 5 at device 3.0 on pci3 > ida0: [GIANT-LOCKED] > ida0: [ITHREAD] > ida0: drives=1 firm_rev=1.22 > idad0: on ida0 > idad0: 34727MB (71122560 sectors), blocksize=512 > acpi_tz0: on acpi0 > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FILTER] > sio1: port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > cpu0: on acpi0 > pmtimer0 on isa0 > orm0: at iomem > 0xc-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xe pnpid > ORM on isa0 > ppc0: at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > ppbus0: [ITHREAD] > plip0: on ppbus0 > plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 > Timecounter "TSC" frequency 996851056 Hz quality 800 > Timecounters tick every 1.000 msec > acd0: CDROM at ata0-master PIO4 > Waiting 5 seconds for SCSI devices to settle > GEOM_LABEL: Label for provider idad0s3 is msdosfs/SYSTEMCFG. > Trying to mount root from ufs:/dev/idad0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /usr/
Re: 7.0 -> 7.1 crash every two day
On 19:57 Tue 12 May , Mel Flynn wrote: > On Sunday 10 May 2009 20:51:48 mailingl...@modernbiztonsag.org wrote: > > Dear List, > > > > I've upgraded from source my 7.0-RELEASE to 7.1-RELEASE. It's a general > > purpose server for a small company and it's clients, running web, sql, mail > > and recursive dns. The machine is a Compaq ML350 G2. Version 7.0 was > > running on it for a year now without any problem. After 30 of April I've > > upgraded to 7.1 (I've followed the handbook) and since then nearly every > > two day the machine becomes unreachable except for echorequest. If i try to > > log in in the terminal it just hangs after i give my password. > > > > I'm out of any ideas. Please feel free to ask any more info that I've > > forgotten to provide. Thank You for your help in advance. > > If this is a not a GENERIC kernel, did you change scheduler or stuck with > SCHED_4BSD in your kernel? I've just added PF related stuff, so the scheduler is remained the default. > -- > Mel > > !DSPAM:117,4a09ba6e83011202221441! > -- Gabri Mate ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
RE: Welcome to the "freebsd-questions" mailing list
> Date: Wed, 13 May 2009 12:55:52 -0400 > From: jerr...@msu.edu > To: korikov...@gmail.com > CC: freebsd-questions@freebsd.org > Subject: Re: Welcome to the "freebsd-questions" mailing list > > On Wed, May 13, 2009 at 08:33:44PM +0530, Shakil Khan wrote: > > > Hi, > > > > Can anyone let me know how can I download FreeBSD kernel source code. I am > > on Linux and am not able to download using CVS. Can someone point me exactly > > and also if some links are available where I can download tar ball of > > FreeBSD kernek source code. > > My suggestion would be to download the latest ISO and install it on > a machine with full source. Then you will have kernel and everything > to make a FreeBSD including the correct compilers and libraries. > > Kernel is really dealt with differently in FreeBSD than in Linux. > Although there is a kernel, it is intimately part of the whole > operating system, not a kernel which someone grabs makes up a separate > distribution with. > to piggy-back a little more, FreeBSD is an entire Operating System whereas Linux is just a Kernel used to run the GNU Operating system (The true nomenclature is GNU/Linux when refering to a Linux based OS). the GNU project is currently working on writing their own Kernel named Hurd based off the mach kernel. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to compare two arrays by using perl script?
On Tue, May 12, 2009 at 11:05 AM, Tsu-Fan Cheng wrote: > I have two arrays, each has two columns (so its A1, B1 and A2, B2). As > are the positions while Bs are the values. I need to get the ratio > between B1 and B2 if their As are the same or close to each other > within a certain distance. Well, You can either compare it by hand or use a module. Use search.cpan.org to find modules that might be useful. A search for 'Arrays' brought me Set::Array which as the methods for at, length, intersection, and union. You can use length and union to find out how many elements in each array are different. If you want to know how 'close' each A is to each other, you probably need to compare each element in each manually. -- milki ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Repeatable X lockups
Jimmie James wrote: When using the xv output driver for vlc or mplayer, X will lockup, crash instantly, trashing the screen and forcing a reboot Image of screen corruption: http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg William Bulley wrote: I have experienced the same problem, but I didn't see any suggestions or answers to your posting. Have you had any success yet with this? Have you tried any other output drivers? This is something I plan to try in the next few days. My system is i386 with Intel 915 graphics on the motherboard. Xorg 7.4 runs fine. When I run mplayer from the command line, in an xterm under open-motif, the X Windows session dies and I am tossed back to the vty. Halp? The x11 output driver sucks when trying to watch something full screen. With the latest (in ports) xf86-video-intel-2.7.1, first time with xv it was fine, flipped to a console then back to X, and ran mplayer with xv, lockup/Xcrash, ssh'd into my box, and for the hell of it, ran startx, and it worked, I was back in X, but the console was still buggered as the picture in the link above shows. I could kill X, but the console was buggered, locked, ssh would allow me to restart X as many times as I wished. All that's in /var/log/messages is May 13 11:19:35 jimmiejaz kernel: pid 65663 (Xorg), uid 0: exited on signal 6 Unfortunatly, Xorg log doesn't have anything, as I restarted X over ssh several times, the only thing there, is when trying to startx a lot of times, the first attempt can't find any screens with a usable configuration, ^c then startx again works just fine. (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): [drm] removed 1 reserved context for kernel (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000 (II) intel(0): [drm] Closed DRM master. xrandr Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600 VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 306mm x 230mm 1600x1200 65.0* vgap...@pci0:0:2:0: class=0x03 card=0x25821043 chip=0x25828086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82915G/GV/GL, 82910GL Integrated Graphics Device' class = display subclass = VGA grep vga /var/run/dmesg.boot vgapci0: port 0x6800-0x6807 mem 0xcfd8-0xcfdf,0xd000-0xdfff,0xcfe8-0xcfeb at device 2.0 on pci0 agp0: on vgapci0 drm0: on vgapci0 vgapci0: child drm0 requested pci_enable_busmaster vgapci1: mem 0xcfe0-0xcfe7 at device 2.1 on pci0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 vgapci0: port 0x6800-0x6807 mem 0xcfd8-0xcfdf,0xd000-0xdfff,0xcfe8-0xcfeb at device 2.0 on pci0 agp0: on vgapci0 drm0: on vgapci0 vgapci0: child drm0 requested pci_enable_busmaster vgapci1: mem 0xcfe0-0xcfe7 at device 2.1 on pci0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 -- Over the years I've come to regard you as people I've met. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ipnat port-range
i need to redirect bunch of ports, or port-range from outside to my jail # /etc/rc.d/ipnat reload /etc/rc.d/ipnat: DEBUG: checkyesno: ipnat_enable is set to YES. /etc/rc.d/ipnat: DEBUG: run_rc_command: doit: /sbin/ipnat -F -C -f /etc/ipnat.rules 0 entries flushed from NAT table 2 entries flushed from NAT list syntax error error at "port-range", line 8 # grep port-range /etc/ipnat.rules rdr bce0 0/0 port-range 49152:65534 -> lama port-range 49152:65534 tcp # -- http://alexus.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
On Wed, May 13, 2009 at 08:33:44PM +0530, Shakil Khan wrote: > Hi, > > Can anyone let me know how can I download FreeBSD kernel source code. I am > on Linux and am not able to download using CVS. Can someone point me exactly > and also if some links are available where I can download tar ball of > FreeBSD kernek source code. My suggestion would be to download the latest ISO and install it on a machine with full source. Then you will have kernel and everything to make a FreeBSD including the correct compilers and libraries. Kernel is really dealt with differently in FreeBSD than in Linux. Although there is a kernel, it is intimately part of the whole operating system, not a kernel which someone grabs makes up a separate distribution with. jerry > Regards > ~Korikov > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
On Tue, May 12, 2009 at 10:43:40PM -0700, Josh Carroll wrote: > On Tue, May 12, 2009 at 10:03 PM, Steve Kargl > wrote: > > Is there anyway to disable sshd from timing out a connection? > > I've tried setting ClientAliveCountMax and ClientAliveInterval > > and TCPKeepAlive in sshd.conf, but no combination that I've > > tried has worked. > > My suggestion would be to install and use the screen port: > > /usr/ports/sysutils/screen . . . or my personal favorite terminal multiplexer, tmux: /usr/ports/misc/tmux From the pkg-descr file: Tmux is a terminal multiplexer, it enables a number of terminals to be accessed and controlled from a single terminal. tmux is intended to be a simple, modern, BSD-licensed alternative to programs such as GNU screen. > > You can then start the test suite run, detach from the screen session, > then ssh in and re-attach to the screen session later to check up on > it. -- Chad Perrin [ original content licensed OWL: http://owl.apotheon.org ] Quoth Larry Wall: "Just don't create a file called -rf." pgpb30wbo0nP2.pgp Description: PGP signature
Re: ghostscript8 - errors when compiling from ports
On Wednesday 13 of May 2009 12:08:55 you wrote: > just a guess, looks like a problems with cups-base, try to update it first. > I recommend ports-mgmt/portmaster. Thank you for help :-) I upgraded all my installed ports, by # portmaster -a but this error still remain. I also reinstall the cups-base port by # portmaster -rf print/cups-base but still with no success. Here is the output: ===>>> Port directory: /usr/ports/print/cups-base ===>>> Gathering distinfo list for installed ports ===>>> Launching 'make checksum' for print/cups-base in background ===>>> Gathering dependency list for print/cups-base from ports ===>>> Starting recursive 'make config' check ===>>> Launching child to update print/ghostscript8 print/cups-base >> print/ghostscript8 ===>>> Port directory: /usr/ports/print/ghostscript8 ===>>> Launching 'make checksum' for print/ghostscript8 in background ===>>> Gathering dependency list for print/ghostscript8 from ports ===>>> Starting recursive 'make config' check ===>>> Recursive 'make config' check complete for print/ghostscript8 print/cups-base >> print/ghostscript8 ===>>> Recursive 'make config' check complete for print/cups-base ===>>> Checking ports that depend on ===>>> No ports depend on ===>>> Done checking ports that depend on ===>>> Starting build for print/cups-base <<<=== ===>>> The 'make config' check found no dependencies to update ===> Cleaning for cups-base-1.3.10_1 ===> Found saved configuration for cups-base-1.3.10_1 ===> Extracting for cups-base-1.3.10_1 => MD5 Checksum OK for cups-1.3.10-source.tar.bz2. => SHA256 Checksum OK for cups-1.3.10-source.tar.bz2. ===> Patching for cups-base-1.3.10_1 ===> Applying FreeBSD patches for cups-base-1.3.10_1 ===> cups-base-1.3.10_1 depends on file: /usr/local/lib/libcups.a - found ===> cups-base-1.3.10_1 depends on executable: gmake - found ===> cups-base-1.3.10_1 depends on executable: gs - not found ===>Verifying install for gs in /usr/ports/print/ghostscript8 ===> Building for ghostscript8-8.64_1 /bin/ln -s -f /usr/ports/print/ghostscript8/work/ghostscript-8.64/epag-3.09/gdevepag.c /usr/ports/print/ghostscript8/work/ghostscript-8.64/base /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/obj /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/bin gmake LDFLAGS='-L/usr/local/lib -L/usr/local/lib -shared -Wl,-soname=libgs.so.8' GS_XE=./bin/../sobin/libgs.so.8.64 STDIO_IMPLEMENTATION=c DISPLAY_DEV=./obj/../soobj/display.dev BINDIR=./bin/../sobin GLGENDIR=./obj/../soobj GLOBJDIR=./obj/../soobj PSGENDIR=./obj/../soobj PSOBJDIR=./obj/../soobj CFLAGS='-O2 -fno-strict-aliasing -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 -I. -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned long int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\"' prefix=/usr/local ./bin/../sobin/gsc ./bin/../sobin/gsx gmake[1]: Entering directory `/usr/ports/print/ghostscript8/work/ghostscript-8.64' cc -DHAVE_MKSTEMP -DHAVE_HYPOT -DHAVE_FONTCONFIG -O2 -fno-strict-aliasing -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 -I. -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned long int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\" -I./obj/../soobj -I./base -I/usr/local/include -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -o ./obj/../soobj/gdevcups.o -c cups/gdevcups.c cups/gdevcups.c:74:25: error: cups/raster.h: No such file or directory cups/gdevcups.c:204: error: expected specifier-qualifier-list before 'cups_raster_t' cups/gdevcups.c:314: warning: excess elements in struct initializer cups/gdevcups.c:314: warning: (near initialization for 'gs_cups_device') cups/gdevcups.c:315: error: extra brace group at end of initializer cups/gdevcups.c:315: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:321: error: 'CUPS_ADVANCE_NONE' undeclared here (not in a function) cups/gdevcups.c:322: error: 'CUPS_FALSE' undeclared here (not in a function) cups/gdevcups.c:323: error: 'CUPS_CUT_NONE' undeclared here (not in a function) cups/gdevcups.c:325: error: extra brace group at end of initializer cups/gdevcups.c:325: error: (nea
Re: Welcome to the "freebsd-questions" mailing list
On Wed, May 13, 2009 at 9:03 AM, Shakil Khan wrote: > Hi, > > Can anyone let me know how can I download FreeBSD kernel source code. I am > on Linux and am not able to download using CVS. Can someone point me > exactly > and also if some links are available where I can download tar ball of > FreeBSD kernek source code. > > Regards > ~Korikov > download the ssrc.?? files, cat them together, and then it's a tarfile that needs these arguments to extract tar -xpzf ssrc.tgz -C /preffered/location Hopefully Linux can handle the permissions/paths correctly. --TJ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
El miércoles 13 de mayo a las 17:26:10 CEST, Steve Kargl escribió: > On Wed, May 13, 2009 at 04:54:33PM +0200, Jose Garcia Juanino wrote: > > El miércoles 13 de mayo a las 07:03:33 CEST, Steve Kargl escribió: > > > Is there anyway to disable sshd from timing out a connection? > > > I've tried setting ClientAliveCountMax and ClientAliveInterval > > > and TCPKeepAlive in sshd.conf, but no combination that I've > > > tried has worked. > > > > > > > > > Running /usr/home/sgk/gcc/gcc4x/gcc/testsuite/gfortran.dg/dg.exp ... > > > > > > Read from remote host troutmask.apl.washington.edu: Connection reset by > > > peer > > > Connection to troutmask.apl.washington.edu closed. > > > > > > The only way I'v efound to complete a run of the GCC testsuite > > > is to sit at the terminal and hit enter every so often. Also > > > note, nohup and backgrounding the job does not inhibit sshd > > > dropping the connection and losing all testsuite results. > > > > I have fixed that problems with ServerAliveInterval option. Give it a > > try: > > > > ssh -o "ServerAliveInterval 60" -l > > > > (screen is a goog idea, as other people have pointed out, but sometimes > > it is not posible to install programs on the server) > > > > Thanks for the tip about ServerAliveInterval. > > Also, thanks, everyone for the tip about screen. A last tip, if ServerAliveInterval does not work as expected: $ ssh -l $ gccCompilation > /tmp/gccCompilation.log 2>&1 < /dev/null At this point, it would be possible to exit from the ssh session with "exit" or CTRL+D. Yo only must to guaranteed this process will not output anything to stdout, and will not read anything from stdin. Best regards pgp9yBjH0PkMU.pgp Description: PGP signature
Re: Welcome to the "freebsd-questions" mailing list
On Wed, May 13, 2009 at 10:03 AM, Shakil Khan wrote: > Hi, > > Can anyone let me know how can I download FreeBSD kernel source code. I am > on Linux and am not able to download using CVS. Can someone point me exactly > and also if some links are available where I can download tar ball of > FreeBSD kernek source code. I'm likely missing something . . . I apologize if I am, but why can't you use CVS on linux? One of many examples found after googling "installing cvs linux": http://www.freeos.com/articles/4608/ > > Regards > ~Korikov > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" > -- www.nealhogan.net www.lambdaserver.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
On Wed, May 13, 2009 at 11:03 AM, Shakil Khan wrote: > Hi, > > Can anyone let me know how can I download FreeBSD kernel source code. I am > on Linux and am not able to download using CVS. Can someone point me exactly > and also if some links are available where I can download tar ball of > FreeBSD kernek source code. > You can install using sysinstall, but that will be out of date. -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Welcome to the "freebsd-questions" mailing list
Hi, Can anyone let me know how can I download FreeBSD kernel source code. I am on Linux and am not able to download using CVS. Can someone point me exactly and also if some links are available where I can download tar ball of FreeBSD kernek source code. Regards ~Korikov ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
On Wed, May 13, 2009 at 04:54:33PM +0200, Jose Garcia Juanino wrote: > El miércoles 13 de mayo a las 07:03:33 CEST, Steve Kargl escribió: > > Is there anyway to disable sshd from timing out a connection? > > I've tried setting ClientAliveCountMax and ClientAliveInterval > > and TCPKeepAlive in sshd.conf, but no combination that I've > > tried has worked. > > > > > > Running /usr/home/sgk/gcc/gcc4x/gcc/testsuite/gfortran.dg/dg.exp ... > > > > Read from remote host troutmask.apl.washington.edu: Connection reset by peer > > Connection to troutmask.apl.washington.edu closed. > > > > The only way I'v efound to complete a run of the GCC testsuite > > is to sit at the terminal and hit enter every so often. Also > > note, nohup and backgrounding the job does not inhibit sshd > > dropping the connection and losing all testsuite results. > > I have fixed that problems with ServerAliveInterval option. Give it a > try: > > ssh -o "ServerAliveInterval 60" -l > > (screen is a goog idea, as other people have pointed out, but sometimes > it is not posible to install programs on the server) > Thanks for the tip about ServerAliveInterval. Also, thanks, everyone for the tip about screen. -- Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 64-Bit Linux Applications
Konrad Heuer wrote: Hello, can I run 64 bit Linux applications on FreeBSD/amd64? Or is Linux emulation 32 bit only? Thanks and best regards Konrad Konrad Heuer GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" To my knowledge 32 bit only. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
El miércoles 13 de mayo a las 07:03:33 CEST, Steve Kargl escribió: > Is there anyway to disable sshd from timing out a connection? > I've tried setting ClientAliveCountMax and ClientAliveInterval > and TCPKeepAlive in sshd.conf, but no combination that I've > tried has worked. > > [ ... ] > > Running /usr/home/sgk/gcc/gcc4x/gcc/testsuite/gfortran.dg/dg.exp ... > > Read from remote host troutmask.apl.washington.edu: Connection reset by peer > Connection to troutmask.apl.washington.edu closed. > > The only way I'v efound to complete a run of the GCC testsuite > is to sit at the terminal and hit enter every so often. Also > note, nohup and backgrounding the job does not inhibit sshd > dropping the connection and losing all testsuite results. I have fixed that problems with ServerAliveInterval option. Give it a try: ssh -o "ServerAliveInterval 60" -l (screen is a goog idea, as other people have pointed out, but sometimes it is not posible to install programs on the server) Best regards pgpbisLSG699F.pgp Description: PGP signature
Re: Disabling ssh timeouts?
On Tue, 12 May 2009 22:03:33 -0700 Steve Kargl wrote: > Is there anyway to disable sshd from timing out a connection? > I've tried setting ClientAliveCountMax and ClientAliveInterval > and TCPKeepAlive in sshd.conf, but no combination that I've > tried has worked. > > I'm trying to running the GCC testsuite, which is not an > interactive job. Once it starts, it writes to stdout when > an error occurs or the testsuite moves to a new major > test category. The last few lines of output are > > Running target unix > Using /usr/X11R6/share/dejagnu/baseboards/unix.exp as board > description file for target. > Using /usr/X11R6/share/dejagnu/config/unix.exp as generic interface > file for target. > Using /usr/home/sgk/gcc/gcc4x/gcc/testsuite/config/default.exp as > tool-and-target-specific interface file. > Running /usr/home/sgk/gcc/gcc4x/gcc/testsuite/gfortran.dg/debug/debug.exp ... > Running /usr/home/sgk/gcc/gcc4x/gcc/testsuite/gfortran.dg/dg.exp ... > > Read from remote host troutmask.apl.washington.edu: Connection reset > by peer Connection to troutmask.apl.washington.edu closed. > > The only way I'v efound to complete a run of the GCC testsuite > is to sit at the terminal and hit enter every so often. Also > note, nohup and backgrounding the job does not inhibit sshd > dropping the connection and losing all testsuite results. > If you are a csh/tcsh user, you can also 'unset autologout' in your shell and see if that helps. Trevor ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Extreme filesystem performance decrese going from FreeBSD4 to FreeBSD7
On Wed, 13 May 2009, Tijl Coosemans wrote: > I believe there was a performance regression in 7.1 for SCSI disks. I > don't know if the amr driver was affected but the issues should be > resolved in FreeBSD 7.2 so you might want to give that a try. http://www.nabble.com/HEADS-UP:-Major-CAM-performance-regression-td21994181.html Indeed, that appears to be the source of the issue. Thanks very much. Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Extreme filesystem performance decrese going from FreeBSD4 to FreeBSD7
On Tuesday 12 May 2009 20:16:21 Andy Dills wrote: > A customer of a customer needed to expand the size of the filesystem > on a webserver they run, and since it was still running 4.11, they > decided to go ahead and upgrade to 7.1. > > Unfortunately, they have seen the performance decrease significantly. > Now, under 7.1, numerous perl processes will queue up (from their web > applications), the load average will be in the 40s to 90s, and > according to top they perl scripts are commonly in the "ufs" state, > which I assume means stuck waiting for read or write responses. > > I have also experienced pretty abysmal read performance from the > array, using dd...we're talking sub 1MBps. So, my assumption is that > something is wrong on the filesystem layer. > > When I look at the CPU utilization in top, I see that 80-90% is > constantly used by "system". > > However, when I look at iostat, I see very low numbers for the raid, > in fact across the board. > > It's a Dell server with a Perc4/Di RAID controller, which uses the > amr driver. They upgraded to larger, 15k rpm ultra 320 disks (from > smaller 15k rpm ultra 320 disks). They made a backup of their web > root, which is a seperate partition, using dump to a temporary drive, > then swapped in the new disks, installed FreeBSD 7.1, and restored > their webroot to a partition on the new array. > > Does anybody have any insight into what could be going on here? I believe there was a performance regression in 7.1 for SCSI disks. I don't know if the amr driver was affected but the issues should be resolved in FreeBSD 7.2 so you might want to give that a try. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
FreeBSD 7.0 Boot Failure
Hello, When I boot a Dell Optiplex 320 running FreeBSD 7.0 the boot sequence hangs at USB3: OHCI version 1.0, legacy support if a keyboard is plugged in. It will boot successfully if the keyboard is not plugged in until after the boot sequence is completed. Normally this would not be that big of deal for most people, but I have 120 of these Dell machines running FreeBSD 7.0 and unplugging keyboards before the boot sequence starts is rather problematic. Thank you, Matt Hewitt President Pacific Crest Research 801-866-1116 x111 801-866-0280 Fax Always ask for exactly what you want, you just might get it! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: net-snmp and IPv6 MIB
Aurélien Ansel wrote:
> Hi all,
>
> sorry in advance for my bad english.
>
> I think i have a problem with the MIB of IPv6.
>
> I have installed the last port of net-snmp.
>
> Can someone give the result of this request, it must be send to a
> computer with a smp daemon and at least one interface with an IPv6 address.
>snmpwalk -v 2c -c
> .1.3.6.1.2.1.4.34
>
> On my FreeBSD 7.1, this command give me : "IP-MIB::ipAddressTable = No
> Such Object available on this agent at this OID"
> But if I execute this command on a Ubuntu with IPv6 addresses and
> net-snmpd running that return a lot of results, in particulary the list
> of IPv6 addresses linked to the machine ( it's what i'm looking for ).
>
> So i don't know if the problem come from my computer or from the port.
It looks like it may be the port. None of my SNMP enabled boxes display
the IPv6 addresses of the interface either (I've never noticed, as I
don't use SNMP for that ;)
However, in the Makefile, I noticed this:
@${ECHO_MSG} "WITH_INETADDRESS_HACK=yes builds with the inetaddress hack"
Which I read somewhere by searching Google that it has something to do
with 'fixing' the IPv6 address issue. Put:
WITH_INETADDRESS_HACK=yes
in your /etc/make.conf file, and try rebuilding the port.
Let us know if that fixes it.
Steve
smime.p7s
Description: S/MIME Cryptographic Signature
ML 115 G5, resp. ML 110 G5
Hello, has anyone experience with HP ML 115 G5 or ML 110 G5 running FreeBSD 7.x ? Any compatibility/hardware issues? Thank you very much in advance. Regards, lk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
On Tue, May 12, 2009 at 11:29 PM, Steve Kargl < s...@troutmask.apl.washington.edu> wrote: > On Tue, May 12, 2009 at 11:14:26PM -0600, Tim Judd wrote: > > On Tue, May 12, 2009 at 11:03 PM, Steve Kargl < > > s...@troutmask.apl.washington.edu> wrote: > > > > > Is there anyway to disable sshd from timing out a connection? > > > I've tried setting ClientAliveCountMax and ClientAliveInterval > > > and TCPKeepAlive in sshd.conf, but no combination that I've > > > tried has worked. > > > > > > > > > Read from remote host troutmask.apl.washington.edu: Connection reset > by > > > peer > > > Connection to troutmask.apl.washington.edu closed. > > > > > > The only way I'v efound to complete a run of the GCC testsuite > > > is to sit at the terminal and hit enter every so often. Also > > > note, nohup and backgrounding the job does not inhibit sshd > > > dropping the connection and losing all testsuite results. > > > > > > > I had this problem at a hotel recently. I think it was the router saying > > "stale connection here, cut it off".. Only way around it I got to work > was > > setting PuTTY (Win32 app) connection keepalive to some value (I used 90 > > seconds). > > > > Is your ISP or gateway one that actively and annoyingly cleans up stale > > connections? > > The ISP is comcast.net. As long as I'm doing something > interactively over the net, comcast.net doesn't time > out the connection. The system resetting the connection > is my system at work. It is my work system that I want > to disable sshd's reset feature. > > -- > Steve > As I said before, it could also be the gateway at the client, or the gateway at the server. I was making the change on a client to keep it active, so check your /etc/ssh/ssh_config I have cisco routers that would potentially do it too, and it's all about the config. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ndis0 interrrupt storm
On 5/12/09, Chris Whitehouse wrote: > Paul B. Mahol wrote: >> >> Just typing bt on db prompt for now should be enough. > > panic: sleeping thread > cpuid = 0 > KDB: enter: panic > [thread pid 1497 tid 100073 ] > Stopped atkdb_enter+0x3a: movl$0,kdb_why > db> bt > Tracing pid 1497 tid 100073 td 0xc356c900 > kdb_enter(c0c3d8fa,c0c3d8fa,c0c42726,d4001b68,0,...) at kdb_enter+0x3a > panic(c0c42726,,0,cc,4,...) at panic+0x136 > propagate_priority(c0d9df84,0,c0c4249e,2e1,c356d180,...) at > propagate_priority+0x18c > turnstile_wait(c356d180,c37b2240,0,18d,c34fc06c,...) at turnstile_wait+0x44d > _mtx_lock_sleep(c34fc06c,c356c900,0,c38de072,6b4,...) at > mtx_lock_sleep+0x18e > _mtx_lock_flags(c34fc06c,0,c38de072,6b4,c089dc98,...) at mtx_lock_flags+0xf7 > ndis_ticktask(c3821700,c34fc000,c37e8e3c,c3916bd0,c38fc6e0,...) at > ndis_ticktask+0x3a > _end(c37e8e3c,d4001d38,c0c39438,333,c37ab548,...) at _end+0x321d > fork_exit(c38fc600,c37e8e3c,d4001d38) at fork_exit+0xb8 > fork_trampoline() at fork_trampoline+0x8 > --- trap 0, eip = 0 esp = 0xd4001d70, ebp = 0 --- > > > Typed by hand but I'm pretty sure it is correct. > > Don't know if it is significant but repeating the panic gave quite a few > different values. Post them too. If only numbers are different and stack is same that could help even more. This is on i386? -- Paul ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
net-snmp and IPv6 MIB
Hi all, sorry in advance for my bad english. I think i have a problem with the MIB of IPv6. I have installed the last port of net-snmp. Can someone give the result of this request, it must be send to a computer with a smp daemon and at least one interface with an IPv6 address. snmpwalk -v 2c -c .1.3.6.1.2.1.4.34 On my FreeBSD 7.1, this command give me : "IP-MIB::ipAddressTable = No Such Object available on this agent at this OID" But if I execute this command on a Ubuntu with IPv6 addresses and net-snmpd running that return a lot of results, in particulary the list of IPv6 addresses linked to the machine ( it's what i'm looking for ). So i don't know if the problem come from my computer or from the port. Thanks in advance for those that will read/answer me. Aurélien ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: does the DRBD can running on freebsd ?
On Wed, May 13, 2009 at 10:32:17AM +0800, yibin.ji...@gmail.com typed: > hello > > I hava a question, can the DRBD run on freebsd ? And does the FreeBSD > have DRBD-likes the soft on freeBSD? Unfortunately not. Allthough you can mirror a filesystem over the network using a combination of ggate and gmirror, the automatic resynchronisation in the right direction and failover features of drbd are missing. Ruben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Wake-on-LAN support in FreeBSD?
On Tue, May 12, 2009 at 06:36:31AM -0700, Peter Steele typed: > > FUD, read ifconfig(8) > > There is no mention of wake-on-LAN in the man page for ifconfig in 7.0. I'd > be interested in seeing if the 8.0 man page has added anything. It has: wol, wol_ucast, wol_mcast, wol_magic Enable Wake On Lan (WOL) support, if available. WOL is a facil- ity whereby a machine in a low power state may be woken in response to a received packet. There are three types of packets that may wake a system: ucast (directed solely to the machine's mac address), mcast (directed to a broadcast or multicast address), or magic (unicast or multicast frames with a ``magic contents''). Not all devices support WOL, those that do indicate the mechanisms they support in their capabilities. wol is a syn- onym for enabling all available WOL mechanisms. To disable WOL use -wol. Ruben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
Steve Kargl schrieb: Is there anyway to disable sshd from timing out a connection? I've tried setting ClientAliveCountMax and ClientAliveInterval and TCPKeepAlive in sshd.conf, but no combination that I've tried has worked. Possibly it's not ssh that closes the connection. Are there any routers between your machine and the remote one? If this is the case it could be one of the routers that has a low timeout for recognizing a connection as "alive". This happens especially if NAT is used, because the router has to keep a table of ip:port pairs for each connection. This should happen only if there is no traffic on the connection within this timeout limit. Uwe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ghostscript8 - errors when compiling from ports
On Wed, May 13, 2009 at 10:28:38AM +0200, Zbigniew Komarnicki wrote: > Hello, > > I have a problem instaling from ports on Athlon64, FreeBSD 7.2-RELEASE (ports > updated today) ghostscript8-8.64_1 (/usr/ports/print/ghostscript8) > > Do you have also such problem? > > I obtain the foolowing errors: > > ===> Building for ghostscript8-8.64_1 > /bin/ln -s -f > /usr/ports/print/ghostscript8/work/ghostscript-8.64/epag-3.09/gdevepag.c > /usr/ports/print/ghostscript8/work/ghostscript-8.64/base > /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/obj > /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/bin > gmake > LDFLAGS='-L/usr/local/lib -L/usr/local/lib -shared -Wl,-soname=libgs.so.8' > GS_XE=./bin/../sobin/libgs.so.8.64 STDIO_IMPLEMENTATION=c > DISPLAY_DEV=./obj/../soobj/display.dev BINDIR=./bin/../sobin > GLGENDIR=./obj/../soobj GLOBJDIR=./obj/../soobj PSGENDIR=./obj/../soobj > PSOBJDIR=./obj/../soobj > CFLAGS='-O2 -fno-strict-aliasing -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 > -I. > -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include > -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes > -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings > -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common > -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned > long > int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU > -DUSE_LIBPAPER -DGS_DEVS_SHARED > -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\"' > prefix=/usr/local ./bin/../sobin/gsc ./bin/../sobin/gsx > gmake[1]: Entering directory > `/usr/ports/print/ghostscript8/work/ghostscript-8.64' > cc -DHAVE_MKSTEMP -DHAVE_HYPOT -DHAVE_FONTCONFIG -O2 -fno-strict-aliasing > -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 -I. > -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include > -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes > -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings > -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common > -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned > long > int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU > -DUSE_LIBPAPER -DGS_DEVS_SHARED > -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\" -I./obj/../soobj > -I./base -I/usr/local/include -O2 -fno-strict-aliasing -pipe -march=athlon64 > -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -o ./obj/../soobj/gdevcups.o -c > cups/gdevcups.c > cups/gdevcups.c:74:25: error: cups/raster.h: No such file or directory > cups/gdevcups.c:204: error: expected specifier-qualifier-list > before 'cups_raster_t' > cups/gdevcups.c:314: warning: excess elements in struct initializer > cups/gdevcups.c:314: warning: (near initialization for 'gs_cups_device') > cups/gdevcups.c:315: error: extra brace group at end of initializer > cups/gdevcups.c:315: error: (near initialization for 'gs_cups_device') > cups/gdevcups.c:321: error: 'CUPS_ADVANCE_NONE' undeclared here (not in a > function) > cups/gdevcups.c:322: error: 'CUPS_FALSE' undeclared here (not in a function) > cups/gdevcups.c:323: error: 'CUPS_CUT_NONE' undeclared here (not in a > function) > cups/gdevcups.c:325: error: extra brace group at end of initializer > cups/gdevcups.c:325: error: (near initialization for 'gs_cups_device') > cups/gdevcups.c:326: error: extra brace group at end of initializer > cups/gdevcups.c:326: error: (near initialization for 'gs_cups_device') > cups/gdevcups.c:328: error: 'CUPS_JOG_NONE' undeclared here (not in a > function) > cups/gdevcups.c:329: error: 'CUPS_EDGE_TOP' undeclared here (not in a > function) > cups/gdevcups.c:330: error: extra brace group at end of initializer > cups/gdevcups.c:330: error: (near initialization for 'gs_cups_device') > cups/gdevcups.c:337: error: 'CUPS_ORIENT_0' undeclared here (not in a > function) > cups/gdevcups.c:339: error: extra brace group at end of initializer > cups/gdevcups.c:339: error: (near initialization for 'gs_cups_device') > cups/gdevcups.c:349: error: 'CUPS_ORDER_CHUNKED' undeclared here (not in a > function) > cups/gdevcups.c:350: error: 'CUPS_CSPACE_K' undeclared here (not in a > function) > cups/gdevcups.c:370: warning: excess elements in struct initializer > cups/gdevcups.c:370: warning: (near initialization for 'gs_cups_device') > cups/gdevcups.c: In function 'cups_close': > cups/gdevcups.c:442: error: 'gx_device_cups' has no member named 'stream' > cups/gdevcups.c:444: warning: implicit declaration of > function 'cupsRasterClose' > cups/gdevcups.c:444: error: 'gx_device_cups' has no member named 'stream' > cups/gdevcups.c:445: error: 'gx_device_cups' has no member named 'stream' > cups/gdevcups.c: In function 'cups_decode_color': > cups/gdevcups.c:481: error: 'gx_device_cups' has no member named 'header' > cups/gdevcups.c:481: error: 'CUPS_CSPACE_KCMYcm' undeclared (first u
Re: How to move vi to /bin
Chris Rees wrote: >> On Wed, May 13, 2009 at 12:51:46PM +0530, manish jain wrote: >>> I want to move vi to /bin so that I have an editor available in >>> single-user mode. This sounds simple (and should be if all you have is >>> a single partition), but there are problems. For starters, terminfo >>> can't locate its database in single-user mode. >>> >>> Could anyone please tell me how to go about this on a 7.x system ? I >>> am also curious to know why FreeBSD doesn't place vi under /bin in the >>> first place. > > You may also have a problem, because IIRC /usr/bin/vi is dynamically > linked with stuff in /usr/lib. Try it, it may work. It's probably why > it's in /usr/bin. > > Or just use /rescue/vi as Andrew suggested! > Yes - use the /rescue/vi as it has been statically compiled so it does not rely on dynamic libraries which may not be available. The purpose here is have a fallback position for repairing a damage/problem which may prevent a successful mount of /usr. There really is nothing to be gained by cluttering up / with stuff that doesn't really belong there and can only bring problems later when you've forgotten what you've done. Kind of like how those coming over from a Linux environment all seem to want to change root's shell to bash, it serves no purpose except foot-shooting. -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to move vi to /bin
El miércoles 13 de mayo a las 09:21:46 CEST, manish jain escribió: > Hi, > > I want to move vi to /bin so that I have an editor available in > single-user mode. This sounds simple (and should be if all you have is > a single partition), but there are problems. For starters, terminfo > can't locate its database in single-user mode. > > Could anyone please tell me how to go about this on a 7.x system ? I > am also curious to know why FreeBSD doesn't place vi under /bin in the > first place. Try /rescue/vi in single user mode. Before that, you must copy /usr/share/misc/termcap.db to /root/.termcap.db (/root is the HOME of user root). Best regards. pgp1W7b5kEWf4.pgp Description: PGP signature
Re: FreeBSD 8.0: how to exchange order of recognized HDA devices?
Quoting "O. Hartmann" (from Wed, 13 May 2009 07:34:56 +): The problem occured after the installation of an ATI HD4670 graphics board, on which one can find an additional HDA device found by the kernel before the on-board HDA device is found. So many clients, like vlc, mplayer etc. do have problems - they either play no sound through the usual pathways (via on-board soundcard/chip and the attached speakerset and/or headphones). I see 4 mixer-devices: mixer0 through mixer3. mixer0 seems to be attached to the graphics-card, mixer1 shows the usual devices I recognize and mixer 2 and 3 are unknown to me, they show up only 2 facilities. To make things simple: is there a way to change order of the found HDA controller? No, but you can do sysctl hw.snd.default_unit=1 or an appropriate line in /etc/sysctl.conf instead. Bye, Alexander. -- Our business in life is not to succeed but to continue to fail in high spirits. -- Robert Louis Stevenson http://www.Leidinger.netAlexander @ Leidinger.net: PGP ID = B0063FE7 http://www.FreeBSD.org netchild @ FreeBSD.org : PGP ID = 72077137 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to move vi to /bin
> On Wed, May 13, 2009 at 12:51:46PM +0530, manish jain wrote: >> I want to move vi to /bin so that I have an editor available in >> single-user mode. This sounds simple (and should be if all you have is >> a single partition), but there are problems. For starters, terminfo >> can't locate its database in single-user mode. >> >> Could anyone please tell me how to go about this on a 7.x system ? I >> am also curious to know why FreeBSD doesn't place vi under /bin in the >> first place. You may also have a problem, because IIRC /usr/bin/vi is dynamically linked with stuff in /usr/lib. Try it, it may work. It's probably why it's in /usr/bin. Or just use /rescue/vi as Andrew suggested! Chris -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ghostscript8 - errors when compiling from ports
Hello, I have a problem instaling from ports on Athlon64, FreeBSD 7.2-RELEASE (ports updated today) ghostscript8-8.64_1 (/usr/ports/print/ghostscript8) Do you have also such problem? I obtain the foolowing errors: ===> Building for ghostscript8-8.64_1 /bin/ln -s -f /usr/ports/print/ghostscript8/work/ghostscript-8.64/epag-3.09/gdevepag.c /usr/ports/print/ghostscript8/work/ghostscript-8.64/base /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/obj /bin/mkdir -p /usr/ports/print/ghostscript8/work/ghostscript-8.64/bin gmake LDFLAGS='-L/usr/local/lib -L/usr/local/lib -shared -Wl,-soname=libgs.so.8' GS_XE=./bin/../sobin/libgs.so.8.64 STDIO_IMPLEMENTATION=c DISPLAY_DEV=./obj/../soobj/display.dev BINDIR=./bin/../sobin GLGENDIR=./obj/../soobj GLOBJDIR=./obj/../soobj PSGENDIR=./obj/../soobj PSOBJDIR=./obj/../soobj CFLAGS='-O2 -fno-strict-aliasing -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 -I. -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned long int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\"' prefix=/usr/local ./bin/../sobin/gsc ./bin/../sobin/gsx gmake[1]: Entering directory `/usr/ports/print/ghostscript8/work/ghostscript-8.64' cc -DHAVE_MKSTEMP -DHAVE_HYPOT -DHAVE_FONTCONFIG -O2 -fno-strict-aliasing -pipe -march=athlon64 -fPIC -DUPD_SIGNAL=0 -I. -I/usr/ports/print/ghostscript8/work/ghostscript-8.64/jasper/src/libjasper/include -I/usr/local/include/libpng -I/usr/local/include -Wall -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes -Wwrite-strings -Wno-strict-aliasing -Wdeclaration-after-statement -fno-builtin -fno-common -DHAVE_STDINT_H -DGX_COLOR_INDEX_TYPE="unsigned long int" -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -DGS_DEVS_SHARED -DGS_DEVS_SHARED_DIR=\"/usr/local/lib/ghostscript/8.64\" -I./obj/../soobj -I./base -I/usr/local/include -O2 -fno-strict-aliasing -pipe -march=athlon64 -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -o ./obj/../soobj/gdevcups.o -c cups/gdevcups.c cups/gdevcups.c:74:25: error: cups/raster.h: No such file or directory cups/gdevcups.c:204: error: expected specifier-qualifier-list before 'cups_raster_t' cups/gdevcups.c:314: warning: excess elements in struct initializer cups/gdevcups.c:314: warning: (near initialization for 'gs_cups_device') cups/gdevcups.c:315: error: extra brace group at end of initializer cups/gdevcups.c:315: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:321: error: 'CUPS_ADVANCE_NONE' undeclared here (not in a function) cups/gdevcups.c:322: error: 'CUPS_FALSE' undeclared here (not in a function) cups/gdevcups.c:323: error: 'CUPS_CUT_NONE' undeclared here (not in a function) cups/gdevcups.c:325: error: extra brace group at end of initializer cups/gdevcups.c:325: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:326: error: extra brace group at end of initializer cups/gdevcups.c:326: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:328: error: 'CUPS_JOG_NONE' undeclared here (not in a function) cups/gdevcups.c:329: error: 'CUPS_EDGE_TOP' undeclared here (not in a function) cups/gdevcups.c:330: error: extra brace group at end of initializer cups/gdevcups.c:330: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:337: error: 'CUPS_ORIENT_0' undeclared here (not in a function) cups/gdevcups.c:339: error: extra brace group at end of initializer cups/gdevcups.c:339: error: (near initialization for 'gs_cups_device') cups/gdevcups.c:349: error: 'CUPS_ORDER_CHUNKED' undeclared here (not in a function) cups/gdevcups.c:350: error: 'CUPS_CSPACE_K' undeclared here (not in a function) cups/gdevcups.c:370: warning: excess elements in struct initializer cups/gdevcups.c:370: warning: (near initialization for 'gs_cups_device') cups/gdevcups.c: In function 'cups_close': cups/gdevcups.c:442: error: 'gx_device_cups' has no member named 'stream' cups/gdevcups.c:444: warning: implicit declaration of function 'cupsRasterClose' cups/gdevcups.c:444: error: 'gx_device_cups' has no member named 'stream' cups/gdevcups.c:445: error: 'gx_device_cups' has no member named 'stream' cups/gdevcups.c: In function 'cups_decode_color': cups/gdevcups.c:481: error: 'gx_device_cups' has no member named 'header' cups/gdevcups.c:481: error: 'CUPS_CSPACE_KCMYcm' undeclared (first use in this function) cups/gdevcups.c:481: error: (Each undeclared identifier is reported only once cups/gdevcups.c:481: error: for each function it appears in.) cups/gdevcups.c:482: error: 'gx_device_cups' has no member named 'header' cups/gdevcups.
Re: Disabling ssh timeouts?
2009/5/13 Wojciech Puchar : >> >> Read from remote host troutmask.apl.washington.edu: Connection reset by >> peer >> Connection to troutmask.apl.washington.edu closed. >> >> The only way I'v efound to complete a run of the GCC testsuite >> is to sit at the terminal and hit enter every so often. Also > > there is screen program. > 2009/5/13 Anthony M. Rasat : > Steve Kargl wrote: >>I'm trying to running the GCC testsuite, which is not an >>interactive job. Once it starts, it writes to stdout when >>an error occurs or the testsuite moves to a new major > > I think you'd better use screen. First, ssh to your machine, start screen > without any parameter, then start your tests. You can leave ssh afterwards. > Your test will continue to run within your session. > > To continue your last session, just ssh again to that machine and: > > screen -r -x > > Hopefully answers your question. Why have three separate people suggested screen? PLEASE, read the previous posts before repeating what's already there! Chris -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to move vi to /bin
On Wed, May 13, 2009 at 12:51:46PM +0530, manish jain wrote: > I want to move vi to /bin so that I have an editor available in > single-user mode. This sounds simple (and should be if all you have is > a single partition), but there are problems. For starters, terminfo > can't locate its database in single-user mode. > > Could anyone please tell me how to go about this on a 7.x system ? I > am also curious to know why FreeBSD doesn't place vi under /bin in the > first place. Why not mount /usr? As I understand it, the usual criterion is that only things that are necessary to get the other partitions mounted go in the root partition; everything else goes under /usr. I don’t know if this is the case with FreeBSD, but I don’t know of any other. -- Benjamin M. A’Lee || mail: b...@subvert.org.uk web: http://bma.subvert.org.uk/ || gpg: 0x166891C7 pgp0MNUAHdTag.pgp Description: PGP signature
Re: FreeBSD 8.0: how to exchange order of recognized HDA devices?
Pieter de Goeje wrote: On Wednesday 13 May 2009 09:34:56 O. Hartmann wrote: The problem occured after the installation of an ATI HD4670 graphics board, on which one can find an additional HDA device found by the kernel before the on-board HDA device is found. So many clients, like vlc, mplayer etc. do have problems - they either play no sound through the usual pathways (via on-board soundcard/chip and the attached speakerset and/or headphones). I see 4 mixer-devices: mixer0 through mixer3. mixer0 seems to be attached to the graphics-card, mixer1 shows the usual devices I recognize and mixer 2 and 3 are unknown to me, they show up only 2 facilities. To make things simple: is there a way to change order of the found HDA controller? sysctl hw.snd.default_unit=x where x should probably be 1 in your case. Regards, Pieter de Goeje ___ freebsd-curr...@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" Great! Thanks, this 'solved' it, simple, shiny, perfect ;-) Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: FreeBSD 8.0: how to exchange order of recognized HDA devices?
On Wednesday 13 May 2009 09:34:56 O. Hartmann wrote: > The problem occured after the installation of an ATI HD4670 graphics > board, on which one can find an additional HDA device found by the > kernel before the on-board HDA device is found. > So many clients, like vlc, mplayer etc. do have problems - they either > play no sound through the usual pathways (via on-board soundcard/chip > and the attached speakerset and/or headphones). > I see 4 mixer-devices: mixer0 through mixer3. mixer0 seems to be > attached to the graphics-card, mixer1 shows the usual devices I > recognize and mixer 2 and 3 are unknown to me, they show up only 2 > facilities. > > To make things simple: is there a way to change order of the found HDA > controller? sysctl hw.snd.default_unit=x where x should probably be 1 in your case. Regards, Pieter de Goeje ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
Read from remote host troutmask.apl.washington.edu: Connection reset by peer Connection to troutmask.apl.washington.edu closed. The only way I'v efound to complete a run of the GCC testsuite is to sit at the terminal and hit enter every so often. Also there is screen program. note, nohup and backgrounding the job does not inhibit sshd no idea, network problems?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to move vi to /bin
On Wed 2009-05-13 12:51:46 UTC+0530, manish jain (invalid.poin...@gmail.com) wrote: > I want to move vi to /bin so that I have an editor available in > single-user mode. You may be able to use /rescue/vi. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Disabling ssh timeouts?
Steve Kargl wrote: >I'm trying to running the GCC testsuite, which is not an >interactive job. Once it starts, it writes to stdout when >an error occurs or the testsuite moves to a new major I think you'd better use screen. First, ssh to your machine, start screen without any parameter, then start your tests. You can leave ssh afterwards. Your test will continue to run within your session. To continue your last session, just ssh again to that machine and: screen -r -x Hopefully answers your question. -- Regards, Anthony M. Rasat Manager - Technical, Network and Support Division PT. Jawa Pos National Network Graha Pena Jawa Pos Group Building, 5th floor Jln. Raya Kebayoran Lama 12, Jakarta Selatan 12210 Indonesia.- Phone 02132185562 Phone 081574217035 Fax 02153651465 Web http://www.jpnn.com * *** Hai, saya virus. Tolong contreng saya. * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
FreeBSD 8.0: how to exchange order of recognized HDA devices?
The problem occured after the installation of an ATI HD4670 graphics board, on which one can find an additional HDA device found by the kernel before the on-board HDA device is found. So many clients, like vlc, mplayer etc. do have problems - they either play no sound through the usual pathways (via on-board soundcard/chip and the attached speakerset and/or headphones). I see 4 mixer-devices: mixer0 through mixer3. mixer0 seems to be attached to the graphics-card, mixer1 shows the usual devices I recognize and mixer 2 and 3 are unknown to me, they show up only 2 facilities. To make things simple: is there a way to change order of the found HDA controller? Thi8s is what 'dmesg|grep HDA' reveals: -- hdac0: HDA Codec #0: ATI R6xx HDMI pcm0: at cad 0 nid 1 on hdac0 hdac1: HDA Codec #0: Analog Devices AD1988B pcm1: at cad 0 nid 1 on hdac1 pcm2: at cad 0 nid 1 on hdac1 pcm3: at cad 0 nid 1 on hdac1 -- Or do i miss something unrevealed? Thanks in advance, Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Cobranças de dividas!
- This mail is a HTML mail. Not all elements could be shown in plain text mode. - SERASA Sr.(a) Constatamos em nossos registros pendências financeiras registradas em seu nome (CPF). Entre em contato com Serasa para esclarecimento. Referente ao ano de 2008. Para visualizar sua(s) pendência(s) financeira(s) clique no link abaixo. http://www.serasa.com.br/ reg.php?id=34859305868283823891 Lembre-se, que deverá ter o Flash Player (Plugin) instalado... Caso não tenha o pluguin, clique aqui e instale .. Serasa 2009 - Todos os direitos reservados ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
How to move vi to /bin
Hi, I want to move vi to /bin so that I have an editor available in single-user mode. This sounds simple (and should be if all you have is a single partition), but there are problems. For starters, terminfo can't locate its database in single-user mode. Could anyone please tell me how to go about this on a 7.x system ? I am also curious to know why FreeBSD doesn't place vi under /bin in the first place. Thank you and Regards Manish Jain invalid.poin...@gmail.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
