Re: Upgrading to higher major version directly or via small steps?
I can't understand why should I use this "adm" tool instead of standard method, described in /usr/src/Makefile. And it's not an answer to this question: 6.2 to 7.3 is which one of the folowing: - 6.2->6.4->7.0->7.3 or - 6.2->7.3 directly? 2010/10/4 Odhiambo Washington : > > > On Mon, Oct 4, 2010 at 4:47 PM, c0re wrote: >> >> Hello all! >> >> >> I'm interested in 2 updates: >> - from 6.2 to 7.3 >> and >> - from 6.2 to 8.1 >> >> Can I update directly from 6.2 to 7.3? like set RELENG_7_3 in supfile and >> make csup. Or I should update to 6.4, then to 7.0, and then to 7.3? >> >> And same question about upgrading from 6.2 to 8.1 - can i csup directly to >> 8.1? If not - why is it so? >> > > http://people.freebsd.org/~rse/upgrade/ > > > > -- > Best regards, > Odhiambo WASHINGTON, > Nairobi,KE > +254733744121/+254722743223 > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > "If you have nothing good to say about someone, just shut up!." > -- Lucky Dube > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On Oct 5, 2010, at 12:33 AM, Matthew Seaman wrote: > Nowadays there is also the possibility of RFC2817 -- in essence you > start an ordinary HTTP session, then issue a STARTTLS command and > upgrade the connection to encrypted. This will allow name-based virtual > hosting with TLS to work as intended. Unfortunately, last I checked, > while apache supports this, most web browsers do not. Throwing just my two bits in: Apache supports it, as does Firefox, and nothing else (maybe Safari does...). IE definitely does not. I looked into this before opting to go multiple static IPs at home for my webservers.___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On 05/10/2010 05:40:42, Peter Boosten wrote: > On 5-10-2010 5:53, Doug Poland wrote: >> On Mon, Oct 04, 2010 at 09:19:52PM -0500, Adam Vande More wrote: >> The documentation for www/pound >> indicated "HTTPS does not allow virtual hosting". I seem to recall >> bumping into this issue in the past that one cannot do named-based >> vhosts on HTTPS. Yes. There's a catch-22 with HTTPS. The ServerName of the encrypted website is part of the keying material used to decrypt the traffic. That's given in the Host: header line in HTTP packets -- which is part of the encrypted content. So to find the name of the virtual host you need to decrypt the packet, but to decrypt the packet, you first need the virtual host name. The only way it can work is by making a 1:1 association of web sites with IP numbers, as you can then work out the server name from the IP connection. Nowadays there is also the possibility of RFC2817 -- in essence you start an ordinary HTTP session, then issue a STARTTLS command and upgrade the connection to encrypted. This will allow name-based virtual hosting with TLS to work as intended. Unfortunately, last I checked, while apache supports this, most web browsers do not. >> Look like it's back to the drawing board... >> >> > > You could circumvent that issue by terminating your HTTPS sessions on > the reverse proxy itself (and talk HTTP to the application server). Some > applications won't work that way, but modern ones (and even Outlook Web > Access) can use a HTTPS-front-end. The problem exists within > applications with hard-coded links. In fact, you pretty much have to do that. Unless your proxy is going to work at layer 2 only, which most people would recognise as a NAT'ing gateway, and not something you'ld use apache to implement at all. If your proxying software needs to work at layer 3 -- that is, the proxy needs to be able to access the HTTP content wrapped inside the TLS session, then the proxy has to be an endpoint of the TLS session. Whether the proxy encrypts its own connections to the original source is then just a matter of preference. [Well, that, and software capability: squid used in reverse proxy mode will speak HTTPS to the end users, but requires plaintext access to the origin servers.] Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matt...@infracaninophile.co.uk Kent, CT11 9PW signature.asc Description: OpenPGP digital signature
How can I know how many packets were lost and resent on particular TCP connection?
Just curious if I can do this. Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
LibreOffice?
When can we expect it in the ports? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On 5-10-2010 5:53, Doug Poland wrote: > On Mon, Oct 04, 2010 at 09:19:52PM -0500, Adam Vande More wrote: > The documentation for www/pound > indicated "HTTPS does not allow virtual hosting". I seem to recall > bumping into this issue in the past that one cannot do named-based > vhosts on HTTPS. > > Look like it's back to the drawing board... > > You could circumvent that issue by terminating your HTTPS sessions on the reverse proxy itself (and talk HTTP to the application server). Some applications won't work that way, but modern ones (and even Outlook Web Access) can use a HTTPS-front-end. The problem exists within applications with hard-coded links. Peter -- http://www.boosten.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On Mon, Oct 4, 2010 at 10:53 PM, Doug Poland wrote: > What also complicates the matter is that the reverse proxy is supposed > to act for several virtual hosts. The documentation for www/pound > indicated "HTTPS does not allow virtual hosting". I seem to recall > bumping into this issue in the past that one cannot do named-based > vhosts on HTTPS. > > Look like it's back to the drawing board... > You can use nginx and sni to accomplish that, but it depends on browser support. If your viewers are using IE7+, or any other modern browsers it shouldn't be a problem. If you have a lot of IE6- and other old browsers, get those IP request forms filled out. -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On Mon, Oct 04, 2010 at 09:19:52PM -0500, Adam Vande More wrote: > On Mon, Oct 4, 2010 at 5:15 PM, Doug Poland wrote: >> >> Hello, >> >> I realize this is not a specific FreeBSD question, but a lot of >> knowledgeable apache admins hang around here. I am tasked with >> creating a reverse SSL proxy in a DMZ. A reverse proxy for http >> is simple, but I'm finding it challenging understanding all that >> needs to take place for apache 2.2.x to act as a reverse. >> >> I've done an extensive amount of googling and reading mod_proxy >> and mod_ssl docs, but to no avail. Can someone point me to some >> docs or configs? >> > > Save your brain, and your computer's memory. Use www/nginx or > www/pound. > What also complicates the matter is that the reverse proxy is supposed to act for several virtual hosts. The documentation for www/pound indicated "HTTPS does not allow virtual hosting". I seem to recall bumping into this issue in the past that one cannot do named-based vhosts on HTTPS. Look like it's back to the drawing board... -- Regards, Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
In the last episode (Oct 05), spellberg_robert said: > well, i looked at questions back to the beginning of august. > > on aug_09 i found a thread that suggests the following questions. You might want to just use "i386" and "amd64" instead of making up your own terminology ("i_386", "intel_64", "amd_64", etc). Note that Intel has chips that support two competing 64-bit instruction sets: ia64, which is used by their Itanium line, and amd64, which originated on AMD chips but Intel adopted for their 64-bit-capable x86 chips (Xeon, Core etc). I'll assume that any time you say "intel_64" or "amd_64" you really mean amd64, since nobody uses Itaniums :) > for a given release of freebsd, > >q:is it that the version labeled "i386" contains only 32_bit >headers and source, which creates the 32_bit version of >freebsd, as well as 32_bit versions of what i write, which will >run as 32_bit code on either i_386, intel_64 or amd_64 ? Yes, assuming you have COMPAT_FREEBSD32 in your kernel config (which GENERIC has, so most people have it). >q:is it that the version labeled "amd64" contains only 64_bit headers > and source, >which creates the 64_bit version of freebsd, as well as 64_bit >versions of what i write, which will run as 64_bit code on the >intel_64 and the amd_64, but, not the i_386 ? Yes. >q:if a "i386" version is installed on an intel_64 platform, then >the pointers are 32_bits_wide, no matter what ? Yes. FreeBSD's models are ILP32 (int, long, pointer are all 32-bit) or LP64 (int is 32-bit, long and pointer are 64-bit). >q:if i want to produce both 32_bit and 64_bit versions of my >"killer_app", then i need two machines, > one a 32_bit or a 64_bit running "i386", > the other --only-- a 64_bit running "amd64" ? Or an amd64 machine with a 32-bit world installed in a subdirectory that you can chroot to to do your 32-bit compiles, or a virtual machine running a 32-bit world. >q:given that i have intel_64 hardware, >do i need to start acquiring the "amd64" versions of the >releases, rather_than / in_addition_to the "i386" versions ? If you have more than 4GB of ram, it would be a good idea. If you have 4GB or less, then 64-bit mode doesn't buy you much, and may cost you performance since all your pointers take up twice the space, filling up your L1/L2 caches twice as fast. >q:given that --i-- am committed to 64_bit hardware, perhaps, i >should give up on the "i386" versions of the releases and >require my users to spend us$_300 on 64_bit hardware [ it would >save a large number of conditional_compilation directives; >nudge_nudge, wink_wink, say no more >] ? Or provide source and let the users compile what they need on their own machines. Assuming you code using the appropriate types (size_t, intptr_t, etc, or int32_t and int64_t for when you know you need a particular word size) instead of assuming that a pointer will fit in an int, your code should compile on either 32- or 64-bit machines with no conditional code. http://www.opengroup.org/onlinepubs/9699919799/basedefs/stdint.h.html -- Dan Nelson dnel...@allantgroup.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Why in FreeBSD Tk apps don't copy to clipboard selected text?
On Mon, Oct 4, 2010 at 10:25 PM, Yuri wrote: > On 10/04/2010 20:12, Adam Vande More wrote: > >> Probably has something to do with your xorg.conf, middle button paste >> works fine on every system I use and they all run FreeBSD. >> > > It works for me very well too. > Everywhere, but from Tk apps on FreeBSD. > Works here. pkg_info -x tkdiff Information for tkdiff-4.1.4_1: Comment: A Tk frontend for diff(1) Description: tkdiff is a fronted for unix's diff based on Tcl/Tk. WWW: http://sourceforge.net/projects/tkdiff/ -- Kevin Lo -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Why in FreeBSD Tk apps don't copy to clipboard selected text?
On 10/04/2010 20:12, Adam Vande More wrote: Probably has something to do with your xorg.conf, middle button paste works fine on every system I use and they all run FreeBSD. It works for me very well too. Everywhere, but from Tk apps on FreeBSD. Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Why in FreeBSD Tk apps don't copy to clipboard selected text?
On Mon, Oct 4, 2010 at 10:04 PM, Yuri wrote: > For example, tkdiff. > In Linux when I select something it is being copied and I can paste it with > middle mouse button click. > In FreeBSD -- text isn't being copied when selected. > Probably has something to do with your xorg.conf, middle button paste works fine on every system I use and they all run FreeBSD. -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Why in FreeBSD Tk apps don't copy to clipboard selected text?
For example, tkdiff. In Linux when I select something it is being copied and I can paste it with middle mouse button click. In FreeBSD -- text isn't being copied when selected. Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ACPI & battery issues
> Eitan, > > I've attached the patch - this came from David Naylor on the ACPI list. If I > understand what he told me at the time, it doesn't fix the problem entirely - > but I can't pretend I understand ACPI. I know it means that on my S10e I no > longer get spammed with ACPI errors - and that my battery status and shutdown > work properly. > > The patch applies to /usr/src/sys/dev/acpica/acpi_ec.c > > It needs some new entries in /boot/loader.conf to adjust the timeouts and > delays - which you can tinker with. The settings given are what works for me > - but search the acpi list archives for David's original email: > > debug.acpi.ec.delay="200" > debug.acpi.ec.gpe="1" > debug.acpi.ec.timeout="100" > > Hope it helps, > > > > Peter Harrison. Thanks for the patch. Unfortunately the hard drive in the laptop in question broke and I'm waiting for a replacement. I will test it when I reinstall freeBSD though. Thanks for the patch. -- Eitan Adler ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 64-bit PGP isn't Decrypting.
Dan Nelson writes: > Does gnupg (ports/security/gnupg) work? I think you'll have a hard time > trying to get people to fix bugs in pgp; the source tree that the pgp port > uses is 14 years old. Wow! I thought that was just the first copywrite date. gnugp installs gpg-2 which is almost the right thing but the files encrypted from pgp report as using the "idea" method. gpg-idea is a port that currently appears to try to decode the test file but immediately bombs out with a couple of cryptic errors about packets so not quite home yet. Thanks for pointing me in the right direction. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: Apache as reverse SSL proxy
On Mon, Oct 4, 2010 at 5:15 PM, Doug Poland wrote: > Hello, > > I realize this is not a specific FreeBSD question, but a lot of > knowledgeable apache admins hang around here. I am tasked with creating > a reverse SSL proxy in a DMZ. A reverse proxy for http is simple, but > I'm finding it challenging understanding all that needs to take place > for apache 2.2.x to act as a reverse. > > I've done an extensive amount of googling and reading mod_proxy and > mod_ssl docs, but to no avail. Can someone point me to some docs or > configs? > Save your brain, and your computer's memory. Use www/nginx or www/pound. -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: PF Version
On 10/4/10 10:03 PM, Jason C. Wells wrote: > What version of PF shipped with 8.1-RELEASE? Where can I find this for > myself? I looked in cvsweb but was unable to understand what I was > reading. Hi Jason, The current version of PF is in line with OpenBSD 4.1, as stated in the Handbook: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-pf.html Best regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
PF Version
What version of PF shipped with 8.1-RELEASE? Where can I find this for myself? I looked in cvsweb but was unable to understand what I was reading. Regards, Jason ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
well, i looked at questions back to the beginning of august. on aug_09 i found a thread that suggests the following questions. for a given release of freebsd, q:is it that the version labeled "i386" contains only 32_bit headers and source, which creates the 32_bit version of freebsd, as well as 32_bit versions of what i write, which will run as 32_bit code on either i_386, intel_64 or amd_64 ? q:is it that the version labeled "amd64" contains only 64_bit headers and source, which creates the 64_bit version of freebsd, as well as 64_bit versions of what i write, which will run as 64_bit code on the intel_64 and the amd_64, but, not the i_386 ? q:if a "i386" version is installed on an intel_64 platform, then the pointers are 32_bits_wide, no matter what ? q:if i want to produce both 32_bit and 64_bit versions of my "killer_app", then i need two machines, one a 32_bit or a 64_bit running "i386", the other --only-- a 64_bit running "amd64" ? q:given that i have intel_64 hardware, do i need to start acquiring the "amd64" versions of the releases, rather_than / in_addition_to the "i386" versions ? q:given that --i-- am committed to 64_bit hardware, perhaps, i should give up on the "i386" versions of the releases and require my users to spend us$_300 on 64_bit hardware [ it would save a large number of conditional_compilation directives; nudge_nudge, wink_wink, say no more ] ? again, i thank you for your assistance. rob Dan Nelson wrote: In the last episode (Oct 04), David Brodbeck said: On a 64-bit system, if you build a binary with the -m32 flag, it should run on both i386 and x86-64 systems. A binary built with -m64 will only run on x86-64. Does that help? Actually, -m32 on amd64 won't generate usable binaries, since /usr/include/machine/* are all amd64 headers and you end up with things like struct FILE with wrong-size elements. There was a thread a few weeks ago discussing this. If you need to generate 32-bit executables, you'll need to do it inside an all-32-bit chroot or a virtual machine. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Which OS for notebook
On Mon, Oct 4, 2010 at 6:11 AM, Leandro F Silva wrote: > Hi guys, > > Which OS are you using on your notebook, FreeBSD / Linux or MAC ? > Also, can you tell us the hardware, Sony / HP etc.. > > Thank you ! Linux Mandriva 2010 on my notebook (Dell 1318) and Mandriva 2010.1 on my netbook (Compaq mini CQ10-120LA) ... I need ACPI to work as expected and no BSD can give me that, and the same goes for wireless cards support .. forget bout bluetotth ... besides, dumping a Linux .iso image in a USB stick to give it a go on my notebook/netbook to try it out before installing was incredibly more easy than doing so with BSD images as most major Linux distributions provide Win/Linux GUI tools to do so (The Mandriva tool will ask you to select an .iso image and a USB ... point, click, you are done ... Fedoras tool will even allow you to create a a separate partition on the same USB device to store your files should you choose not to install the OS). Linux (as much as I don´t like it) is years ahead of BSD´s in that regards ... And, oh yeah .. native UTF-8 tty´s and KVM make a huge difference. FreeBSD has been relegated to my desktop (which I have come to use only ocassionally, and servers). Best Regards Gonzalo Nemmi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
aha ! this relates to what i found in , on my existing i386 version of freebsd on my intel_64 hardware platform. i will look into the "questions" archive. meanwhile, back at the ranch, does this mean that i need the "amd64" version of freebsd to get the right headers ? Dan Nelson wrote: In the last episode (Oct 04), David Brodbeck said: On a 64-bit system, if you build a binary with the -m32 flag, it should run on both i386 and x86-64 systems. A binary built with -m64 will only run on x86-64. Does that help? Actually, -m32 on amd64 won't generate usable binaries, since /usr/include/machine/* are all amd64 headers and you end up with things like struct FILE with wrong-size elements. There was a thread a few weeks ago discussing this. If you need to generate 32-bit executables, you'll need to do it inside an all-32-bit chroot or a virtual machine. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
In the last episode (Oct 04), David Brodbeck said: > On a 64-bit system, if you build a binary with the -m32 flag, it > should run on both i386 and x86-64 systems. A binary built with -m64 > will only run on x86-64. Does that help? Actually, -m32 on amd64 won't generate usable binaries, since /usr/include/machine/* are all amd64 headers and you end up with things like struct FILE with wrong-size elements. There was a thread a few weeks ago discussing this. If you need to generate 32-bit executables, you'll need to do it inside an all-32-bit chroot or a virtual machine. -- Dan Nelson dnel...@allantgroup.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
spellberg_robert wrote: [snip] > consider a dvd_image [ to pick an approach ] of a release to be found on > ftp.freebsd.org. > >q:if the release_name includes the string "i386", >am i restricted to 8 32_bit registers and 32_bit pointers, >notwithstanding its installation on an intel_64 platform ? I am certainly not an expert, and if I am interpreting the question correctly I believe the answer here would be yes. x86 processors of today can run either 32 bit or 64 bit OS. For example, you could install a 32 bit Windows XP and it would run as 32 bit even thought the processor has 64 bit capability. The restriction you are asking about here would be as a result of using a 32 bit OS and not because of processor capabilities. > > next, from what i have been reading, >those releases whose names contain "amd64" not only are for amd cpus, >but, also, are for the intel_64 variant [ no doubt, probing the cpu for >its feature_set ]. > >q:if i install an "amd64" version on an "intel_64" platform, >am i restricted to 16 64_bit registers and 48_bit pointers or >can i compile for both cpu_models >[ perhaps, with nothing more complicated than a compiler option >[ ] ? > The "amd64" stuck primarily because the 64 bit extensions were initially pioneered by AMD, and subsequently copied by Intel. Generally speaking, for the most part it is possible to run 32 bit binaries on a 64 bit OS installed to 64 bit x86 CPU hardware. Another Windows example: Let's say you have 64 bit version of Windows installed. It can run 32 bit apps using "WoW", or Windows on Windows. amd64 processor can execute either 32 bit or 64 bit simultaneously providing there are libraries contained within the OS to facilitate this. You just wouldn't really want to do this because it is slow. I do not know enough about this as I have never had a need, but I think similar facilities exist in FreeBSD. You can install amd64 to a 64 bit CPU and still execute 32 bit software using a 32 compatibility library set. Look at the GENERIC kernel config file for amd64 and you will see a line like this: options COMPAT_FREEBSD32# Compatible with i386 binaries You need to have the 32 bit library set built and installed. Investigate this particular subject for further (and better) explanation. It isn't so much a matter of compiling an app for both models as it is where they will run. You cannot compile an app as 64 bit and run it on an i386 OS install, whether or not the CPU is 64 bit. But with the help of 32 bit compatibility libs you _can_ run a 32 bit binary on a 64 bit OS installed to a 64 bit processor. -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
On a 64-bit system, if you build a binary with the -m32 flag, it should run on both i386 and x86-64 systems. A binary built with -m64 will only run on x86-64. Does that help? On Mon, Oct 4, 2010 at 1:45 PM, spellberg_robert wrote: > hmmm ..., you did not answer the question that i asked. > > per your statement, on i386, amd64 or both ? > > > > David Brodbeck wrote: >> >> On Mon, Oct 4, 2010 at 12:51 PM, spellberg_robert >> wrote: >> >>> q: if i install an "amd64" version on an "intel_64" platform, >>> am i restricted to 16 64_bit registers and 48_bit pointers or >>> can i compile for both cpu_models >>> [ perhaps, with nothing more complicated than a compiler option ] >>> ? >> >> >> Take a look at gcc's -m32 and -m64 options. >> > > > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
OT: Apache as reverse SSL proxy
Hello, I realize this is not a specific FreeBSD question, but a lot of knowledgeable apache admins hang around here. I am tasked with creating a reverse SSL proxy in a DMZ. A reverse proxy for http is simple, but I'm finding it challenging understanding all that needs to take place for apache 2.2.x to act as a reverse. I've done an extensive amount of googling and reading mod_proxy and mod_ssl docs, but to no avail. Can someone point me to some docs or configs? TIA! -- Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 64-bit PGP isn't Decrypting.
In the last episode (Oct 04), Martin McCormick said: > There are two new FreeBSD8.1 systems. Both got pgp added to them by use of > pkg_add -r pgp. Both adds installed > > Pretty Good Privacy(tm) 2.6.3ia - Public-key encryption for the masses. > (c) 1990-96 Philip Zimmermann, Phil's Pretty Good Software. 1996-03-04 > International version - not for use in the USA. Does not use RSAREF. > > A test file that had been encrypted earlier was used on both systems. It > works fine on the 32-bit system and always fails on the 64-bit system. > Trust me. As many times as I tried it, I couldn't possibly be mistyping > the pass phrase every time on the 64-bit system and then getting it right > on the 32-bit system. Does gnupg (ports/security/gnupg) work? I think you'll have a hard time trying to get people to fix bugs in pgp; the source tree that the pgp port uses is 14 years old. -- Dan Nelson dnel...@allantgroup.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
JAILS in FreeBSD manual - Minor ambiguity between 15.6.1.3 Creating Jails & 15.6.1.4 Upgrading
Hello, "15.6.1.4 Upgrading" in the FreeBSD manual provides a great step, by step way to safely update jails. I've just installed apache in the host system, and now I wish to propagate it to the system wide jail skeleton, and www jail. But given my limited experience with jails, I am perplexed to read in the 2nd last sentence of this section: "Do not forget to run mergemaster in each jail". The instruction doesn't say between which steps (which one between 1 through 6) to run mergemaster, and I'm left guessing as I'm still coming up to speed on jail configuration and maintenance. Carefully reading *15.6.1.2 "Creating the Template"* it says that mergemaster is run in: Step 4 - Use Mergemaster to install missing configuration files... This follows: Step 1 - Create a read-only directory structure for the read-only file system...(make installworld) Step 2 - Prepare FreeBSD ports collection for the jails... Step 3 - Create a skeleton for the read-write portion... However *15.6.1.4 Upgrading* shares only step 1 (make installworld), but steps 2 through 6 are quite different. I am left wondering between which steps in 15.6.1.4 Upgrading that I am to run mergemaster on each jail. I would be very happy to get a tip. Thank you, Matthew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
hmmm ..., you did not answer the question that i asked. per your statement, on i386, amd64 or both ? David Brodbeck wrote: On Mon, Oct 4, 2010 at 12:51 PM, spellberg_robert wrote: q:if i install an "amd64" version on an "intel_64" platform, am i restricted to 16 64_bit registers and 48_bit pointers or can i compile for both cpu_models [ perhaps, with nothing more complicated than a compiler option ] ? Take a look at gcc's -m32 and -m64 options. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: [fbsd_questions] i386 vs amd64, on intel_64
On Mon, Oct 4, 2010 at 12:51 PM, spellberg_robert wrote: > q: if i install an "amd64" version on an "intel_64" platform, > am i restricted to 16 64_bit registers and 48_bit pointers or > can i compile for both cpu_models > [ perhaps, with nothing more complicated than a compiler option ] ? Take a look at gcc's -m32 and -m64 options. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
[fbsd_questions] i386 vs amd64, on intel_64
howdy, y'all --- these may be stupid questions and, if so, i am prepared to slap my forehead with the palm of my hand. i recently acquired my first batch of intel cpus with 64_bit integer registers [ celeron 440 ], specifically for the 16 registers and the potential for a truly_gargantuan datasize. intel has called this many things, currently "intel 64 architecture". to me, this is just a bigger, faster "386", just like my "486" and several flavors of "pentium" [ now, all retired ]. i have never owned an amd cpu. this may be the source of my confusion. what prompted my recent searches was the observation, while working on my "killer_app", in , as i recall, that the size of an "intptr" is 32_bits. [ i am aware of the gcc "double_integer" implementation of "64_bit" data_integers. that is not the issue; i want big memory. ] i want my app to exist in two sizes, small [ 8_, 16_ and 32_bit integers and 32_bit pointers ] and large [ 8_, 16_, 32_ and 64_bit integers and 48_bit pointers ], the choice between the two being made by my users, according to their needs. my objective is to produce both versions, simultaneously. so, i have been looking at many pages, mostly at freebsd.org [ http and ftp ] and gcc.gnu.org, as well as some others [ release notes, in particular ]. the last question is the big one. consider a dvd_image [ to pick an approach ] of a release to be found on ftp.freebsd.org. q:if the release_name includes the string "i386", am i restricted to 8 32_bit registers and 32_bit pointers, notwithstanding its installation on an intel_64 platform ? next, from what i have been reading, those releases whose names contain "amd64" not only are for amd cpus, but, also, are for the intel_64 variant [ no doubt, probing the cpu for its feature_set ]. q:if i install an "amd64" version on an "intel_64" platform, am i restricted to 16 64_bit registers and 48_bit pointers or can i compile for both cpu_models [ perhaps, with nothing more complicated than a compiler option ] ? please cc. in advance, thanks big_time. rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: BIND: could not configure root hints from 'named.root': file not found
Krad, Thank you for the tip. I've changed the "." to the correct value. Matthew On 1 October 2010 21:16, CyberLeo Kitsana wrote: On 10/01/2010 12:52 PM, Matthew wrote: I would be grateful for any pointers on how to resolve this. I suspect the error message may not be exactly descriptive of whats happening. Kinda. Here's a few points to keep in mind when working with bind in FreeBSD: * By default, named runs in a chroot jail rooted at /var/named/. * For security reasons, named cannot write to anything in that tree, except the dynamic, slave, and working directories. * named uses its current working directory to resolve relative pathnames in the configuration file. * With a recent change to ISC Bind 9, named started complaining if it couldn't write to its current working directory. At the time, this was (chroot)/etc/namedb/; this was subsequently changed to (chroot)/etc/namedb/working/ to make named happy without compromising security. When the working directory for named was (chroot)/etc/namedb/, everything was peachy. Since this was changed, relative pathnames no longer work as expected because the reference point is different. The easiest solution is to alter your configuration file to include only absolute pathnames, relative to the root of the jail. The default named config file (in /var/named/etc/namedb/named.conf) is an excellent source of examples for this. -- Fuzzy love, -CyberLeo Technical Administrator CyberLeo.Net Webhosting http://www.CyberLeo.Net Furry Peace! - http://.fur.com/peace/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to " freebsd-questions-unsubscr...@freebsd.org" Hmm, options { directory"."; that doesnt look ideal. Not sure if you are meaning to do that but put an explicit direcorty in eg /etc/namedb. Otherwise it will be looking in whatever current directory you are in at that time. The main named.conf will be found as its supplied via a cli switch by the rc script. However all subsequent files will come from the current dir ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: BIND: could not configure root hints from 'named.root': file not found
CyberLeo Kitsana, Thank you so much for the history and evolution on Bind expected directory structures. It enabled me to jump through that tough spot. Thanks again, Matthew On 10/01/2010 12:52 PM, Matthew wrote: I would be grateful for any pointers on how to resolve this. I suspect the error message may not be exactly descriptive of whats happening. Kinda. Here's a few points to keep in mind when working with bind in FreeBSD: * By default, named runs in a chroot jail rooted at /var/named/. * For security reasons, named cannot write to anything in that tree, except the dynamic, slave, and working directories. * named uses its current working directory to resolve relative pathnames in the configuration file. * With a recent change to ISC Bind 9, named started complaining if it couldn't write to its current working directory. At the time, this was (chroot)/etc/namedb/; this was subsequently changed to (chroot)/etc/namedb/working/ to make named happy without compromising security. When the working directory for named was (chroot)/etc/namedb/, everything was peachy. Since this was changed, relative pathnames no longer work as expected because the reference point is different. The easiest solution is to alter your configuration file to include only absolute pathnames, relative to the root of the jail. The default named config file (in /var/named/etc/namedb/named.conf) is an excellent source of examples for this. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: ACPI & battery issues
Saturday, 2 October 2010 at 17:01:41 -0400, Eitan Adler said: > On Sat, Oct 2, 2010 at 4:01 PM, wrote: > > I get the same messages with the stock acpi on a Lenovo S10e. Someone on > > the acpi list (who's name I forget) wrote a patch which removes the error. > > If you think it might help I'll root it out and forward it on. > > > I'll be happy to take a look at the patch and see if it solves my > problem. does the patch just remove the error message or solve a > specific problem that might be causing the issue? Eitan, I've attached the patch - this came from David Naylor on the ACPI list. If I understand what he told me at the time, it doesn't fix the problem entirely - but I can't pretend I understand ACPI. I know it means that on my S10e I no longer get spammed with ACPI errors - and that my battery status and shutdown work properly. The patch applies to /usr/src/sys/dev/acpica/acpi_ec.c It needs some new entries in /boot/loader.conf to adjust the timeouts and delays - which you can tinker with. The settings given are what works for me - but search the acpi list archives for David's original email: debug.acpi.ec.delay="200" debug.acpi.ec.gpe="1" debug.acpi.ec.timeout="100" Hope it helps, Peter Harrison. > > > > > > > ... > > I see > > ACPI Exception: AE_NO_HARDWARE_RESPONSE, Returned by Handler for > > [EmbeddedControl] (20100331/evregion-588) > > ACPI Error (psparse-0633): Method parse/execution failed > > [\\_SB_.PCI0.LPCB.BAT1._BST] (Node 0xc6adba60), > > AE_NO_HARDWARE_RESPONSE > > > > repeatedly in dmesg > > > > sysctl's relating to battery information is also slow: > > % time sysctl hw.acpi.battery.state > > hw.acpi.battery.state: 7 > > sysctl hw.acpi.battery.state 0.00s user 2.18s system 72% cpu 3.006 total > > > > % time sysctl hw.acpi.battery > > hw.acpi.battery.life: -1 > > hw.acpi.battery.time: -1 > > hw.acpi.battery.state: 7 > > hw.acpi.battery.units: 1 > > hw.acpi.battery.info_expire: 5 > > sysctl hw.acpi.battery 0.00s user 6.58s system 67% cpu 9.779 total > > > > also note that the life and time are both negative one. > > > > This is on a Lenovo G530 laptop. > -- > Eitan Adler ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Netbooks & BSD
El día Monday, October 04, 2010 a las 11:33:02PM +, Mikle Krutov escribió: > Hello, list! > I'm going to buy a netbook soon, so a question is which one. > The choice is between > 1) Samsung N127 > 2) ASUS Eee PC 900AX > 3) MSI U120-094 > Which one is the best for running FreeBSD? > "The best" mainly is for opensource (e.g. not ndis) & stable wireless > drivers. > So, any good experience and suggestions? > Thank you for your time! I have no idea about which would be the best one, but I'm using right now (in the moment of typing) an EeePC 900, details here: http://www.unixarea.de/installEeePC-8CURRENT.txt and this is just fine; HIH matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e - w http://www.unixarea.de/ Solidarity with the zionistic pirates of Israel? Not in my name! ¿Solidaridad con los piratas sionistas de Israel? ¡No en mi nombre! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Netbooks & BSD
On Mon, Oct 4, 2010 at 18:33, Mikle Krutov wrote: > Hello, list! > I'm going to buy a netbook soon, so a question is which one. > The choice is between > 1) Samsung N127 > 2) ASUS Eee PC 900AX > 3) MSI U120-094 > Which one is the best for running FreeBSD? > "The best" mainly is for opensource (e.g. not ndis) & stable wireless drivers. > You won't find much support for "N" based wireless cards in FreeBSD. So, any good experience and suggestions? > I would save my money to buy something that FreeBSD runs nice on... just my 2 cents... Thank you for your time! > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscr...@freebsd.org" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
64-bit PGP isn't Decrypting.
There are two new FreeBSD8.1 systems. Both got pgp added to them by use of pkg_add -r pgp. Both adds installed Pretty Good Privacy(tm) 2.6.3ia - Public-key encryption for the masses. (c) 1990-96 Philip Zimmermann, Phil's Pretty Good Software. 1996-03-04 International version - not for use in the USA. Does not use RSAREF. A test file that had been encrypted earlier was used on both systems. It works fine on the 32-bit system and always fails on the 64-bit system. Trust me. As many times as I tried it, I couldn't possibly be mistyping the pass phrase every time on the 64-bit system and then getting it right on the 32-bit system. On the 64-bit system, one can not seem to encrypt a file and then decrypt it with the pass phrase. If you take the encrypted file from the 64-bit system and try to decrypt on the 32-bit system, that fails so something appears wrong with the numerical encryption process that is peculiar to being 64 bits. I am thinking some of the cipher routines may be relying on the width of certain expressions that change if running in 64-bit mode. So far, files encrypted on the 64-bit system are ultrasecure in that they can'ts seem to be read anywhere.:-) Has anybody else had the same problem on a 64-bit version of pgp? I am glad I discovered this before anything crytical happened. Martin McCormick ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Problems installing django and py-tkinter
webmail ate my subject -- Original Message -- From: "Len Conrad" Reply-To: lcon...@go2france.com Date: Mon, 4 Oct 2010 21:47:23 +0200 >installed: > >Python 2.7 (r27:82500, Sep 30 2010, 16:50:36) > > >cd /usr/ports/www/py-django11 > >fails: > > >== >WARNING: The C extension could not be compiled, speedups are not enabled. >Plain-Python installation succeeded. >== >===> Installing for py27-MarkupSafe-0.11 >===> py27-MarkupSafe-0.11 depends on file: /usr/local/bin/easy_install-2.7 - >found >===> py27-MarkupSafe-0.11 depends on file: /usr/local/bin/python2.7 - found >===> Generating temporary packing list >===> Checking if textproc/py-MarkupSafe already installed >running easy_install >error: Not a URL, existing file, or requirement spec: >'/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/dist/MarkupSafe-0.11-py2.7-freebsd-8.1-RELEASE-i386.egg' >*** Error code 1 > >Stop in /usr/ports/textproc/py-MarkupSafe. >*** Error code 1 > >Stop in /usr/ports/devel/py-Jinja2. >*** Error code 1 > >Stop in /usr/ports/devel/py-Jinja2. >*** Error code 1 > >Stop in /usr/ports/textproc/py-sphinx. >*** Error code 1 > >Stop in /usr/ports/www/py-django11. >*** Error code 1 > >Stop in /usr/ports/www/py-django11. > >Seems like the path is wrong above compared to the ports tree: > >mx1# find /usr/ports/ -iname "*markupsafe*" | less >/usr/ports/devel/py-Jinja2/work/Jinja2-2.5.2/jinja2/_markupsafe >/usr/ports/devel/py-Jinja2/work/Jinja2-2.5.2/build/lib/jinja2/_markupsafe >/usr/ports/textproc/py-MarkupSafe >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11 >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/markupsafe >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/MarkupSafe.egg-info >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/lib.freebsd-8.1-RELEASE-i386/markupsafe >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/temp.freebsd-8.1-RELEASE-i386-2.7/markupsafe >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/build/lib/markupsafe >/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/dist/MarkupSafe-0.11-py2.7.egg >/usr/ports/textproc/py-MarkupSafe/work/.extract_done.MarkupSafe._usr_local >/usr/ports/textproc/py-MarkupSafe/work/.patch_done.MarkupSafe._usr_local >/usr/ports/textproc/py-MarkupSafe/work/.configure_done.MarkupSafe._usr_local >/usr/ports/textproc/py-MarkupSafe/work/.build_done.MarkupSafe._usr_local >/usr/ports/distfiles/MarkupSafe-0.11.tar.gz > > > >=== > >the tkinter fails, too (I'm trying to work thru thinkpython.pdf) > > >cd /usr/ports/x11-toolkits/py-tkinter > > >===> Returning to build of libX11-1.3.3_1,1 >===> libX11-1.3.3_1,1 depends on file: /usr/local/bin/autoconf-2.67 - found >===> libX11-1.3.3_1,1 depends on package: libtool>=2.2 - found >===> libX11-1.3.3_1,1 depends on executable: pkg-config - found >===> Configuring for libX11-1.3.3_1,1 >configure.ac:5: warning: AC_INIT: not a literal: >https://bugs.freedesktop.org/enter_bug.cgi?product=xorg >configure.ac:5: warning: AC_INIT: not a literal: >https://bugs.freedesktop.org/enter_bug.cgi?product=xorg >configure.ac:5: warning: AC_INIT: not a literal: >https://bugs.freedesktop.org/enter_bug.cgi?product=xorg >configure:14185: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl > If this token and others are legitimate, please use m4_pattern_allow. > See the Autoconf documentation. >*** Error code 1 > >Stop in /usr/ports/x11/libX11. >*** Error code 1 > >Stop in /usr/ports/x11-toolkits/tk85. >*** Error code 1 > >Stop in /usr/ports/x11-toolkits/tk85. >*** Error code 1 > >Stop in /usr/ports/x11-toolkits/py-tkinter. > > >Thanks >Len ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
(no subject)
installed: Python 2.7 (r27:82500, Sep 30 2010, 16:50:36) cd /usr/ports/www/py-django11 fails: == WARNING: The C extension could not be compiled, speedups are not enabled. Plain-Python installation succeeded. == ===> Installing for py27-MarkupSafe-0.11 ===> py27-MarkupSafe-0.11 depends on file: /usr/local/bin/easy_install-2.7 - found ===> py27-MarkupSafe-0.11 depends on file: /usr/local/bin/python2.7 - found ===> Generating temporary packing list ===> Checking if textproc/py-MarkupSafe already installed running easy_install error: Not a URL, existing file, or requirement spec: '/usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/dist/MarkupSafe-0.11-py2.7-freebsd-8.1-RELEASE-i386.egg' *** Error code 1 Stop in /usr/ports/textproc/py-MarkupSafe. *** Error code 1 Stop in /usr/ports/devel/py-Jinja2. *** Error code 1 Stop in /usr/ports/devel/py-Jinja2. *** Error code 1 Stop in /usr/ports/textproc/py-sphinx. *** Error code 1 Stop in /usr/ports/www/py-django11. *** Error code 1 Stop in /usr/ports/www/py-django11. Seems like the path is wrong above compared to the ports tree: mx1# find /usr/ports/ -iname "*markupsafe*" | less /usr/ports/devel/py-Jinja2/work/Jinja2-2.5.2/jinja2/_markupsafe /usr/ports/devel/py-Jinja2/work/Jinja2-2.5.2/build/lib/jinja2/_markupsafe /usr/ports/textproc/py-MarkupSafe /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11 /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/markupsafe /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/MarkupSafe.egg-info /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/lib.freebsd-8.1-RELEASE-i386/markupsafe /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/temp.freebsd-8.1-RELEASE-i386-2.7/markupsafe /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/build/lib/markupsafe /usr/ports/textproc/py-MarkupSafe/work/MarkupSafe-0.11/dist/MarkupSafe-0.11-py2.7.egg /usr/ports/textproc/py-MarkupSafe/work/.extract_done.MarkupSafe._usr_local /usr/ports/textproc/py-MarkupSafe/work/.patch_done.MarkupSafe._usr_local /usr/ports/textproc/py-MarkupSafe/work/.configure_done.MarkupSafe._usr_local /usr/ports/textproc/py-MarkupSafe/work/.build_done.MarkupSafe._usr_local /usr/ports/distfiles/MarkupSafe-0.11.tar.gz === the tkinter fails, too (I'm trying to work thru thinkpython.pdf) cd /usr/ports/x11-toolkits/py-tkinter ===> Returning to build of libX11-1.3.3_1,1 ===> libX11-1.3.3_1,1 depends on file: /usr/local/bin/autoconf-2.67 - found ===> libX11-1.3.3_1,1 depends on package: libtool>=2.2 - found ===> libX11-1.3.3_1,1 depends on executable: pkg-config - found ===> Configuring for libX11-1.3.3_1,1 configure.ac:5: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg configure.ac:5: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg configure.ac:5: warning: AC_INIT: not a literal: https://bugs.freedesktop.org/enter_bug.cgi?product=xorg configure:14185: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. *** Error code 1 Stop in /usr/ports/x11/libX11. *** Error code 1 Stop in /usr/ports/x11-toolkits/tk85. *** Error code 1 Stop in /usr/ports/x11-toolkits/tk85. *** Error code 1 Stop in /usr/ports/x11-toolkits/py-tkinter. Thanks Len ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Freebsd-update not working for me
On Fri, Oct 1, 2010 at 22:25, Jason wrote: > On Fri, Oct 01, 2010 at 04:45:46PM -0700, Kurt Buff thus spake: >> >> Weird little problem here... >> >> I've got a 7.1-RELEASE box I'm trying to get to 8.1-RELEASE. I was >> able to do 'freebsd-update -install' and get the security patches and >> all, but 'freebsd-update -r 8.1-RELEASE upgrade' fails - see output >> below. Can anyone point me in the right direction to start >> troubleshooting this? I don't see anything in /var/log/messages. > > You may want to see how many files you have downloaded under > /var/db/freebsd-update. The patches were applied. It appears it was only an > issue of getting more files. As the program is running you can do an ls > under /var/db/freebsd-update to see how many files are being downloaded. > > Have you tried running the command again? > -jgh Ran the command again, and it failed again, dang it. After running it again this morning, issuing 'll /var/db/freebsd-update/files | wc -l' yields 43625 files - only 9 of them were dated today. Issuing 'wc -l /var/db/freebsd-update/files.wanted' yields '36196 /var/db/freebsd-update/files.wanted' Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Netbooks & BSD
Hello, list! I'm going to buy a netbook soon, so a question is which one. The choice is between 1) Samsung N127 2) ASUS Eee PC 900AX 3) MSI U120-094 Which one is the best for running FreeBSD? "The best" mainly is for opensource (e.g. not ndis) & stable wireless drivers. So, any good experience and suggestions? Thank you for your time! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
And still the wife doesn't suspect? On Mon, Oct 4, 2010 at 2:42 PM, Robert wrote: > On Tue, 5 Oct 2010 03:53:09 +1100 (EST) > Ian Smith wrote: > > Ian > > I am in the process of dd the entire disk to a 1TB disk but I wanted to > respond to you. You have given a lot of good advice and information and > I appreciate it. > > > > > ~> fdisk /dev/da1 > > > > *** Working on device /dev/da1 *** > > > > parameters extracted from in-core disklabel are: > > > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > > > > > Figures below won't work with BIOS for partitions not in cyl 1 > > > > parameters to be used for BIOS calculations are: > > > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > > > > > Media sector size is 512 > > > > Warning: BIOS sector numbering starts with sector 1 > > > > Information from DOS bootblock is: > > > > The data for partition 1 is: > > > > sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) > > > > start 63, size 976773105 (476939 Meg), flag 0 > > > > beg: cyl 0/ head 1/ sector 1; > > > > end: cyl 1023/ head 15/ sector 63 > > > > The data for partition 2 is: > > > > > > > > The data for partition 3 is: > > > > > > > > The data for partition 4 is: > > > > > > > > > > > So pausing here for a bit .. starting at 63 (cyl 0/ head 1/ sector1 > > in CHS terms), looks correct for s1, one slice, whole disk for NTFS. > > That should rule out a damaged MBR in sector 0 - though it doesn't > > rule out the boot code in the first 2 or so sectors having been > > clobbered. > > I have tried earlier to explain what might/could have happened but was > most likely not specific enough. I will try to do better. > > This was the wife's computer. It had Xp Pro on the first slice and > FreeBSD 7.x on the second. Windows started acting strange and then was > rebooting as soon as the desktop rendered. I booted to safe mode and > went back one day in the recover option. Same thing happened, i.e. > reboot after desktop rendered. I again booted in safe mode and went > back two days. Could never get it to boot again even in safe mode. > > I booted into FreeBSD and copied some critical files off of the Windows > slice that she was desperate to have. I put them on a pen drive so she > could then access via her laptop. > > I checked the backup drive and saw that all was fine. I had the D$S > stuff backing up nightly. > > I was able to mount either drive with _ntfs or ntfs-3g. > > No matter what I tried I could not get windows to boot even in safe > mode. I left it running on FreeBSD aver night expecting to have to > reinstall windows in the morning. > > The next day the system had rebooted with the GAG screen up. I ran > memtest for about 6 hours and it showed a couple of faults. I pulled > one of the three 512M memory chips and it seemed to run OK but still > could not boot windows. > > I reinstalled windows and was doing all of the updates when it started > failing to boot. Somewhere in that time the backup (500GB) drive became > invisible to windows. FreeBSD showed only ad6 without the s1 partition. > I used "sade" to look at it and it did not show as ntfs. I marked it as > ntfs thinking that would fix it but it probably caused all of these > problems. > > Whatever is wrong with that computer it now completely messed up. It > will not even power on. I strapped out the power connect pins 3 and 4 > and the PS runs and the voltages check out. > > > > > You can often poke around the beginning of disks to advantage with > > say: # dd if=/dev/da1 bs=512 count=126 | hd | less > > to see the first two tracks .. sector 63 should be where NTFS starts, > > ie after sectors 0-62 on head 0. hd(1) skips repeated zeroes or 0xff > > and such, so you can hunt through quite a lot of early sectors > > without huge output in less, usually. > > > > > > Which looks a lot better. I can mount /dev/da1 and it shows > > > > Just to be clear, you mean: '# mount_ntfs /dev/da1 /mnt' ? > > > > (try to be sure to mount NTFS filesystems _explicitly_ read-only, > > especially if likely damaged) > > > > > > ~> ls -l /mnt > > > > total 70044 > > > > -rwxr-xr-x 1 root wheel 2560 Dec 31 1600 $AttrDef > > > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $BadClus > > > > -rwxr-xr-x 1 root wheel 4194304 Dec 31 1600 $Bitmap > > > > -rwxr-xr-x 1 root wheel 8192 Oct 1 09:09 $Boot > > > > drwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Extend > > > > -rwxr-xr-x 1 root wheel 67108864 Oct 1 09:09 $LogFile > > > > -rwxr-xr-x 1 root wheel 4096 Oct 1 09:09 $MFTMirr > > > > -rwxr-xr-x 1 root wheel 0 Dec 31 1600 $Secure > > > > -rwxr-xr-x 1 root wheel131072 Oct 1 09:09 $UpCase > > > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Volume > > > > -rwxr-xr-x 1 root wheel 45124 Aug 18 2001 NTDETECT.COM > > > > drwxr-xr-x 1 root wheel 0 Oct 1 17:29 System Volume > > > > Informatio
Re: OT: fdisk
On Tue, 5 Oct 2010 03:53:09 +1100 (EST) Ian Smith wrote: Ian I am in the process of dd the entire disk to a 1TB disk but I wanted to respond to you. You have given a lot of good advice and information and I appreciate it. > > > ~> fdisk /dev/da1 > > > *** Working on device /dev/da1 *** > > > parameters extracted from in-core disklabel are: > > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > > > Figures below won't work with BIOS for partitions not in cyl 1 > > > parameters to be used for BIOS calculations are: > > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > > > Media sector size is 512 > > > Warning: BIOS sector numbering starts with sector 1 > > > Information from DOS bootblock is: > > > The data for partition 1 is: > > > sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) > > > start 63, size 976773105 (476939 Meg), flag 0 > > > beg: cyl 0/ head 1/ sector 1; > > > end: cyl 1023/ head 15/ sector 63 > > > The data for partition 2 is: > > > > > > The data for partition 3 is: > > > > > > The data for partition 4 is: > > > > > > So pausing here for a bit .. starting at 63 (cyl 0/ head 1/ sector1 > in CHS terms), looks correct for s1, one slice, whole disk for NTFS. > That should rule out a damaged MBR in sector 0 - though it doesn't > rule out the boot code in the first 2 or so sectors having been > clobbered. I have tried earlier to explain what might/could have happened but was most likely not specific enough. I will try to do better. This was the wife's computer. It had Xp Pro on the first slice and FreeBSD 7.x on the second. Windows started acting strange and then was rebooting as soon as the desktop rendered. I booted to safe mode and went back one day in the recover option. Same thing happened, i.e. reboot after desktop rendered. I again booted in safe mode and went back two days. Could never get it to boot again even in safe mode. I booted into FreeBSD and copied some critical files off of the Windows slice that she was desperate to have. I put them on a pen drive so she could then access via her laptop. I checked the backup drive and saw that all was fine. I had the D$S stuff backing up nightly. I was able to mount either drive with _ntfs or ntfs-3g. No matter what I tried I could not get windows to boot even in safe mode. I left it running on FreeBSD aver night expecting to have to reinstall windows in the morning. The next day the system had rebooted with the GAG screen up. I ran memtest for about 6 hours and it showed a couple of faults. I pulled one of the three 512M memory chips and it seemed to run OK but still could not boot windows. I reinstalled windows and was doing all of the updates when it started failing to boot. Somewhere in that time the backup (500GB) drive became invisible to windows. FreeBSD showed only ad6 without the s1 partition. I used "sade" to look at it and it did not show as ntfs. I marked it as ntfs thinking that would fix it but it probably caused all of these problems. Whatever is wrong with that computer it now completely messed up. It will not even power on. I strapped out the power connect pins 3 and 4 and the PS runs and the voltages check out. > > You can often poke around the beginning of disks to advantage with > say: # dd if=/dev/da1 bs=512 count=126 | hd | less > to see the first two tracks .. sector 63 should be where NTFS starts, > ie after sectors 0-62 on head 0. hd(1) skips repeated zeroes or 0xff > and such, so you can hunt through quite a lot of early sectors > without huge output in less, usually. > > > > Which looks a lot better. I can mount /dev/da1 and it shows > > Just to be clear, you mean: '# mount_ntfs /dev/da1 /mnt' ? > > (try to be sure to mount NTFS filesystems _explicitly_ read-only, > especially if likely damaged) > > > > ~> ls -l /mnt > > > total 70044 > > > -rwxr-xr-x 1 root wheel 2560 Dec 31 1600 $AttrDef > > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $BadClus > > > -rwxr-xr-x 1 root wheel 4194304 Dec 31 1600 $Bitmap > > > -rwxr-xr-x 1 root wheel 8192 Oct 1 09:09 $Boot > > > drwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Extend > > > -rwxr-xr-x 1 root wheel 67108864 Oct 1 09:09 $LogFile > > > -rwxr-xr-x 1 root wheel 4096 Oct 1 09:09 $MFTMirr > > > -rwxr-xr-x 1 root wheel 0 Dec 31 1600 $Secure > > > -rwxr-xr-x 1 root wheel131072 Oct 1 09:09 $UpCase > > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Volume > > > -rwxr-xr-x 1 root wheel 45124 Aug 18 2001 NTDETECT.COM > > > drwxr-xr-x 1 root wheel 0 Oct 1 17:29 System Volume > > > Information > > > -rwxr-xr-x 1 root wheel 193 Oct 1 09:12 boot.ini > > > -rwxr-xr-x 1 root wheel222368 Aug 18 2001 ntldr > > > > > > But I cannot mount /dev/da1s1 > > > > > > ~> sudo mount_ntfs /dev/da1s1 /mnt > > > mount_ntfs: /dev/da1s1: Invalid argument > > Ok,
Re: Which OS for notebook
On 10/04/10 17:55, Erich Dollansky wrote: Hi, On Monday 04 October 2010 12:11:30 Leandro F Silva wrote: Which OS are you using on your notebook, FreeBSD / Linux or MAC ? Also, can you tell us the hardware, Sony / HP etc.. there is no general answer. You must select an individual model first and see then if the hardware is supported. I use normally FreeBSD 7 or 8 but I installed Fedora on a single machine as there is no driver for the LAN available in FreeBSD. If I remember right, wireless was not a problem there. So, choose a model and ask then again. Ok, I have FreeBSD 7 running on an older Fujitsu Lifebook. 8.0 gave me problems with USB. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" I would rather find a machine which will run FreeBSD if possible. If possible go to a laptop shop with a bootable USB stick (memstick.img) and try booting different machines. Collect dmesg and pciconf output to study at your leisure. I have a HP nc6320 which runs 8.* fine except for the card reader and sleep/resume functions. chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Which OS for notebook
Hi, On Monday 04 October 2010 12:11:30 Leandro F Silva wrote: > > Which OS are you using on your notebook, FreeBSD / Linux or MAC ? > Also, can you tell us the hardware, Sony / HP etc.. there is no general answer. You must select an individual model first and see then if the hardware is supported. I use normally FreeBSD 7 or 8 but I installed Fedora on a single machine as there is no driver for the LAN available in FreeBSD. If I remember right, wireless was not a problem there. So, choose a model and ask then again. Ok, I have FreeBSD 7 running on an older Fujitsu Lifebook. 8.0 gave me problems with USB. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Which OS for notebook
On Mon, Oct 4, 2010 at 9:04 AM, Gautham Ganapathy wrote: > On Mon, Oct 4, 2010 at 5:11 AM, Leandro F Silva > wrote: > > Hi guys, > > > > Which OS are you using on your notebook, FreeBSD / Linux or MAC ? > > Also, can you tell us the hardware, Sony / HP etc.. > > > > Thank you ! > > ___ > > FreeBSD with NDIS for wireless and xfce for desktop. Works great on a > gateway ;) > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
In freebsd-questions Digest, Vol 331, Issue 1, Message: 5 On Sun, 3 Oct 2010 08:19:36 -0500 (CDT) Robert Bonomi wrote: > > On Sat, 2 Oct 2010 17:00:00 -0600 (MDT) > > Warren Block wrote: > > > > > On Sat, 2 Oct 2010, Robert wrote: > > > > > > > Greetings > > > > > > > > I am in deep with the wife. Her computer went belly up. It was > > > > running XP pro and I had backups going to a second drive. I can no > > > > longer access that drive. > > > > > > > > I pulled it and attached it via USB to one of my FreeBSD machines > > > > but it will not mount. It is a 500G hard drive and I get _wild_ > > > > results just looking at it with fdisk. > > > > > > > > ~> fdisk /dev/da1s1 > > > > *** Working on device /dev/da1s1 *** > > > > > > Wait a minute... shouldn't that be just "da1"? da1s1 is the first > > > slice (partition), and the data there should be your XP filesystem, > > > probably NTFS. > > > > Warren, > > > > You are right. Here it is: > > > > ~> fdisk /dev/da1 > > *** Working on device /dev/da1 *** > > parameters extracted from in-core disklabel are: > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > Figures below won't work with BIOS for partitions not in cyl 1 > > parameters to be used for BIOS calculations are: > > cylinders=60801 heads=255 sectors/track=63 (16065 blks/cyl) > > > > Media sector size is 512 > > Warning: BIOS sector numbering starts with sector 1 > > Information from DOS bootblock is: > > The data for partition 1 is: > > sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) > > start 63, size 976773105 (476939 Meg), flag 0 > >beg: cyl 0/ head 1/ sector 1; > >end: cyl 1023/ head 15/ sector 63 > > The data for partition 2 is: > > > > The data for partition 3 is: > > > > The data for partition 4 is: > > Robert Bonomi, replying to yours before the above slipped away, but I'm directing this to Robert the OP, ok? So pausing here for a bit .. starting at 63 (cyl 0/ head 1/ sector1 in CHS terms), looks correct for s1, one slice, whole disk for NTFS. That should rule out a damaged MBR in sector 0 - though it doesn't rule out the boot code in the first 2 or so sectors having been clobbered. You can often poke around the beginning of disks to advantage with say: # dd if=/dev/da1 bs=512 count=126 | hd | less to see the first two tracks .. sector 63 should be where NTFS starts, ie after sectors 0-62 on head 0. hd(1) skips repeated zeroes or 0xff and such, so you can hunt through quite a lot of early sectors without huge output in less, usually. > > Which looks a lot better. I can mount /dev/da1 and it shows Just to be clear, you mean: '# mount_ntfs /dev/da1 /mnt' ? (try to be sure to mount NTFS filesystems _explicitly_ read-only, especially if likely damaged) > > ~> ls -l /mnt > > total 70044 > > -rwxr-xr-x 1 root wheel 2560 Dec 31 1600 $AttrDef > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $BadClus > > -rwxr-xr-x 1 root wheel 4194304 Dec 31 1600 $Bitmap > > -rwxr-xr-x 1 root wheel 8192 Oct 1 09:09 $Boot > > drwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Extend > > -rwxr-xr-x 1 root wheel 67108864 Oct 1 09:09 $LogFile > > -rwxr-xr-x 1 root wheel 4096 Oct 1 09:09 $MFTMirr > > -rwxr-xr-x 1 root wheel 0 Dec 31 1600 $Secure > > -rwxr-xr-x 1 root wheel131072 Oct 1 09:09 $UpCase > > -rwxr-xr-x 1 root wheel 0 Oct 1 09:09 $Volume > > -rwxr-xr-x 1 root wheel 45124 Aug 18 2001 NTDETECT.COM > > drwxr-xr-x 1 root wheel 0 Oct 1 17:29 System Volume > > Information > > -rwxr-xr-x 1 root wheel 193 Oct 1 09:12 boot.ini > > -rwxr-xr-x 1 root wheel222368 Aug 18 2001 ntldr > > > > But I cannot mount /dev/da1s1 > > > > ~> sudo mount_ntfs /dev/da1s1 /mnt > > mount_ntfs: /dev/da1s1: Invalid argument Ok, and its not clear why/how mount_ntfs would be happy mounting da1 'raw' but it sure looks like (at least part of) an NTFS root directory; not necessarily all what you'd see as C:\ in windows explorer, say; windows plays strange tricks the way it layers directories for display. There's weird dates (1600?) and only you would know if those October 1st timestamps are of when you mounted it, or when windows last accessed it? The fact that boot.ini is a few minutes later than some is interesting; that's where entries for multi-booting NT may exist, and maybe something messed with that, hardware glitch? or (not entirely unknown :) one of a hundred thousand or so viruses? So, can you look at these files when so mounted? Can you do something like 'du -d2 /mnt' and see anything useful? I'm just guessing /hoping here that the disk may not be as badly scrambled as you fear, despite the apparent oddness of it mounting like that. >From a later message, quoting Robert: > Warren, thanks for the link. I will be reading it and increasing my > understanding of
Re: Which OS for notebook
On Mon, Oct 4, 2010 at 5:11 AM, Leandro F Silva wrote: > Hi guys, > > Which OS are you using on your notebook, FreeBSD / Linux or MAC ? > Also, can you tell us the hardware, Sony / HP etc.. > > Thank you ! > ___ I would prefer FreeBSD, if not for the lack of support (yet) for 802.11n wireless chipsets (don't really like USB wifi poking out of the laptop!). FreeBSD used to work fine on my old Dell Inspiron 9400 (no longer manufactured), except for the card reader, which I never needed. I am waiting for support for wireless-n chipsets (and CUDA, if I'm lucky!) for my Alienware m11x (ndis did not work out) Regards Gautham ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Which OS for notebook
On Mon, 4 Oct 2010, Leandro F Silva wrote: Hi guys, Which OS are you using on your notebook, FreeBSD / Linux or MAC ? Also, can you tell us the hardware, Sony / HP etc.. Thank you ! Personally I like to use FreeBSD, but a better answer is found on freebsd-mob...@freebsd.org. Read the thread 'free bsd on laptops'. For the second check out http://laptop.bsdgroup.de/freebsd/index.html. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Mon, 4 Oct 2010 07:52:21 -0700, Robert wrote: > On Mon, 4 Oct 2010 16:32:25 +0200 > Polytropon wrote: > [r...@asus64] ~# fdisk /dev/md10 > *** Working on device /dev/md10 *** > parameters extracted from in-core disklabel are: > cylinders=7648 heads=255 sectors/track=63 (16065 blks/cyl) > > Figures below won't work with BIOS for partitions not in cyl 1 > parameters to be used for BIOS calculations are: > cylinders=7648 heads=255 sectors/track=63 (16065 blks/cyl) > > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) > start 63, size 976773105 (476939 Meg), flag 0 > beg: cyl 0/ head 1/ sector 1; > end: cyl 1023/ head 15/ sector 63 > The data for partition 2 is: > > The data for partition 3 is: > > The data for partition 4 is: > Okay, as I see it, this looks valid - a working partition table. What can prevent mounting now is a defect in the NTFS MFT, everything "after" the disk's partition table. > > > [r...@asus64] ~# ls -l /dev/md* > > > crw-r- 1 root operator0, 129 Oct 4 06:43 /dev/md10 > > > crw-r- 1 root operator0, 130 Oct 4 06:43 /dev/md10s1 > > > crw--- 1 root wheel 0, 66 Oct 1 14:43 /dev/mdctl > > > [r...@asus64] ~# mount -o ro /dev/md10s1 /mnt > > > > Good. At least a bit. > > Is this the way to mount it, not _ntfs? My fault: Using mount_ntfs is the correct way (or mount -t ntfs); mount without options for a device / directory NOT listed in fstab defaults to UFS. > No. I was trying to just get the data to a 250GB drive. Now I am doing > the 500GB to a 1TB drive and will follow up when complete. Very good. You can check the progress by issuing ^T - dd will then show a status message. If you're using ddrescue (no big difference here), you'll get some more info, like this: % ddrescue -d -r 3 -n /dev/ad1s1f ad1s1f.ddr log.txt Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued:90772 MB, errsize: 0 B, current rate:6815 kB/s ipos:90772 MB, errors: 0,average rate:6723 kB/s opos:90772 MB Finished This example is 3h 45min for 80 GB from one (P)ATA disk to another. You can watch the progress continuously here. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: any one with acer 5740 running freebsd ?
thanks...when i did a google search it comes up with issues of bsd with Insyde BIOS. I guess iam overly cautious...time to take the plunge... thanks all.. --- On Mon, 4/10/10, Odhiambo Washington wrote: From: Odhiambo Washington Subject: Re: any one with acer 5740 running freebsd ? To: "Mbsd Basd" Cc: freebsd-questions@freebsd.org Date: Monday, 4 October, 2010, 9:59 AM On Mon, Oct 4, 2010 at 12:04 PM, Mbsd Basd wrote: Hi , This is my first mail to the list. I would like to install free bsd/pcbsd to my laptop. Primary use is to use it as a multimedia pc and also to use it to learn about operating systems I tried the pc bsd live cd and it worked fine. I would like to hear any comments or +experience with install on acer 5740. configuration is as below:. Intel i5 3gb ram INSYDE BIOS 1.15 320GB hard disk DVD+-RW b/g/n wireless thanks, If it worked with the LiveCD, it will work when installed! -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Sun, 3 Oct 2010 14:29:35 -0700, Robert wrote: > Thanks for the info. I successfully did the above and now I have a > 58.6GB file named disk.img on a UFS disk. > > Umm, what should I do now. Sorry for dumb question number 37 this > weekend but I am a bit confused. Can I do just the opposite to another > NTFS drive and end up with all the data looking like it should? I.E. dd > from the file to an NTFS disk. You can now use the file as if it were a disk. To "turn it into a device", simply do % mkdir mnt % sudo mdconfig -a -t vnode -u 10 -f disk.img % mount -o ro /dev/md10 mnt/ This should give you the chance to extract files from it. You can also use fdisk on the /dev/md10 file (or any other unit number given by -u you want to use). I wouldn't dd the file back to the original drive, that might make things worse. For data extraction, I suggest dd'ing the WHOLE disk into an image file and then working with this file, having the original disk not touched anymore until the data is back. See /usr/local/share/doc/sleuthkit/skins_ntfs.txt from TSK (port: sleuthkit) for details about NTFS file recovery. As you did show that you could mount the disk (I think you presented a ls output with typical "Windows" files) this should be possible again after fixing the partition table. I have to admit that I've got NO CLUE about "Windows" file systems as I don't use them, so I sadly can't be more specific. You can also use ddrescue instead of dd, as it allows resuming a dd operation, and it will dynamically adjust read block sizes, so it might run faster. % ddrescue -d -r 3 -n /dev/ad12 ntfs.ddr log.txt If mounting does not work, you can use tools like photorec on the /dev/md10 file which will extract known file types. The tool magicrescue also could work: % magicrescue -r /usr/local/share/magicrescue/recipes -d mr_output /dev/md10 -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 4 Oct 2010 08:17:02 -0400, Jerry wrote: > You say po-tah-toes, he says po-tay-toes, who cares? I say Kartoffel, you say name server, who cares? :-) > Were you > completely baffled by what he was trying to convey? At the very least, > you could have attempted to answer his question before giving him a > lecture that served no purpose other than to belittle the OP. You know that I'm a bit picky about correct terminology, and I've often said on this list that the things are correctly called "directories" because that is their correct name, and even their "more correct" name in UNIX context. In specific fields of language, you have terminology. You have them in education, in commerce, in politics, in the context of law, and of course you have them in the field of IT. That is nothing special, bad, or strange. > By the way, in Linux and other Unix-like operating system, everything > on the system is treated as being a file, and a directory is thus > considered to be just a special type of file that contains a list of > file names and the corresponding inodes for each file and directory > that it appears to contain. An inode is a data structure on a > filesystem that stores all the information about a file except its name > and its actual data. Therefore, strictly speaking, he could have just > referenced "file" instead. As he refered to a special file (in the more system-level context of a file system) the naming "directory" would be better as it is not misleading. Using the term "file" without further explainations usually refers to a "plain file". Let me give a quite formal example: usage of inodes = { file | directory | link } file = { regular file | block device | pipe | ... } This is not complete (and not trying to be), but it illustrates that the word "file" does not carry the meaning "directory" per se in its normal in-context use. > The term folder is used as a synonym for directory on the Microsoft > Windows and Macintosh operating systems. Erm... no. Not quite correct. The term "folder" is a description of a pictural element that represents a directory, or, to be correct, it is the NAME of that pictural element that represents a directory. This word is common used *instead* of "directory" in the MICROS~1 land. While "directory" is a technical term (as seen in the context of IT), "folder" is a rather descriptive term that is used to refer to the technical term (like when you're refering to a heavy load transportation truck as a "big car"). Jerry, I don't want to pollute the list with discussions about terminology and other aspects of language and their use, but please be sure that it was not my intention to "belittle" the OP, and I'm sure the OP did understand my comment correctly, as so did many others before him. The fact is that we have certain terminology here, and it should be the most natural thing to use it properly. That's just the way it is. The use of the correct words distinguishes those who know what they are talking about from those who don't (yet). As the OP did post a valid (non-stupid) question to this list, I am SURE that he knows the difference, so he definitely knows what he's talking about. Using "folder" instead of "directory" is therefore considered a simple fauxpas by me. It's possible that the OP has also to work with "Windows" stuff, or he's also using a Mac, so he got a little "confused". Now I have to check the zone papers of my Kartoffel, who cares. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Mon, 4 Oct 2010 16:32:25 +0200 Polytropon wrote: > On Mon, 4 Oct 2010 07:08:58 -0700, Robert wrote: > > I have now a free 1TB drive for use. It is formatted as UFS. Should > > I remove formatting before I dd the 500GB drive to it? > > Not needed, as you're going to use it under the control of FreeBSD. > After formatting and mounting it, let's say as /mnt, use dd (or > ddrescue) to first get an 1:1 copy of the source disk. > It is being performed even as we "speak". > > > > I tried the above process and here is what I have. > > > > [r...@asus64] ~# mdconfig -a -t vnode -u 10 -f /250extra/disk.img > > [r...@asus64] ~# mount -o ro /dev/md10 /mnt > > mount: /dev/md10 : Invalid argument > > Of course. :-) > > > > > [r...@asus64] ~# mount_ntfs -o ro /dev/md10 /mnt > > mount_ntfs: /dev/md10: Input/output error > > This indicates that the NTFS seems to be damaged and prevents > mount_ntfs from mounting it. Start with "baby steps": Is there > a valid partition table? > > # fdisk /dev/md10 [r...@asus64] ~# fdisk /dev/md10 *** Working on device /dev/md10 *** parameters extracted from in-core disklabel are: cylinders=7648 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=7648 heads=255 sectors/track=63 (16065 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) start 63, size 976773105 (476939 Meg), flag 0 beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 15/ sector 63 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: > > You should now get a partition table. > > Did you create disk.img by dd'ing da0 or da0s1? This may matter. da1...but not the entire disk. > > > > > [r...@asus64] ~# ls -l /dev/md* > > crw-r- 1 root operator0, 129 Oct 4 06:43 /dev/md10 > > crw-r- 1 root operator0, 130 Oct 4 06:43 /dev/md10s1 > > crw--- 1 root wheel 0, 66 Oct 1 14:43 /dev/mdctl > > [r...@asus64] ~# mount -o ro /dev/md10s1 /mnt > > Good. At least a bit. Is this the way to mount it, not _ntfs? > > > > > [r...@asus64] ~# ls -l /mnt > > total 0 > > [r...@asus64] ~# df -h > > Filesystem SizeUsed Avail Capacity Mounted on > > > > /dev/ad12s1d 226G 59G149G28%/250extra > > /dev/md10s1 451G 32G383G 8%/mnt > > ^^^ > > [r...@asus64] ~# ls -la /mnt > > total 0 > > Hmmm... you dd'ed the WHOLE disk to disk.img? Does the size look > reasonable? No. I was trying to just get the data to a 250GB drive. Now I am doing the 500GB to a 1TB drive and will follow up when complete. Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Mon, 4 Oct 2010 07:08:58 -0700, Robert wrote: > I have now a free 1TB drive for use. It is formatted as UFS. Should I > remove formatting before I dd the 500GB drive to it? Not needed, as you're going to use it under the control of FreeBSD. After formatting and mounting it, let's say as /mnt, use dd (or ddrescue) to first get an 1:1 copy of the source disk. > I tried the above process and here is what I have. > > [r...@asus64] ~# mdconfig -a -t vnode -u 10 -f /250extra/disk.img > [r...@asus64] ~# mount -o ro /dev/md10 /mnt > mount: /dev/md10 : Invalid argument Of course. :-) > [r...@asus64] ~# mount_ntfs -o ro /dev/md10 /mnt > mount_ntfs: /dev/md10: Input/output error This indicates that the NTFS seems to be damaged and prevents mount_ntfs from mounting it. Start with "baby steps": Is there a valid partition table? # fdisk /dev/md10 You should now get a partition table. Did you create disk.img by dd'ing da0 or da0s1? This may matter. > [r...@asus64] ~# ls -l /dev/md* > crw-r- 1 root operator0, 129 Oct 4 06:43 /dev/md10 > crw-r- 1 root operator0, 130 Oct 4 06:43 /dev/md10s1 > crw--- 1 root wheel 0, 66 Oct 1 14:43 /dev/mdctl > [r...@asus64] ~# mount -o ro /dev/md10s1 /mnt Good. At least a bit. > [r...@asus64] ~# ls -l /mnt > total 0 > [r...@asus64] ~# df -h > Filesystem SizeUsed Avail Capacity Mounted on > > /dev/ad12s1d 226G 59G149G28%/250extra > /dev/md10s1 451G 32G383G 8%/mnt > ^^^ > [r...@asus64] ~# ls -la /mnt > total 0 Hmmm... you dd'ed the WHOLE disk to disk.img? Does the size look reasonable? > > Warren wrote: > > It will give an exact copy of the first 250G, which also means it > > will not resize the 500G filesystem into a working 250G version. > > Same questions as above. Can I dd to a 1TB? And what format on the > drive? Format the target disk as UFS, as you do with any disk you want to use for FreeBSD. Then dd (or ddrescue) the source disk to a file on that target disk. Then "connect" this file to a memory disk (md) device. Check the fdisk output for that device. Mount it. Get your data off. > I apologize again if I am coming off as dense. I have not used "dd" > before as I have always used dump for backups. Correct: dump + restore are used for UFS backups, but in this case, you need to deal with "Windows" stuff that does not support such standard means. That's why you need dd to make an 1:1 copy to work with it as you would work on the original disk. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
any one with acer 5740 running freebsd ?
Hi , This is my first mail to the list. I would like to install free bsd/pcbsd to my laptop. Primary use is to use it as a multimedia pc and also to use it to learn about operating systems I tried the pc bsd live cd and it worked fine. I would like to hear any comments or +experience with install on acer 5740. configuration is as below:. Intel i5 3gb ram INSYDE BIOS 1.15 320GB hard disk DVD+-RW b/g/n wireless thanks, alien ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: any one with acer 5740 running freebsd ?
On Mon, Oct 4, 2010 at 12:04 PM, Mbsd Basd wrote: > Hi , > > This is my first mail to the list. I would like to install free bsd/pcbsd > to my laptop. Primary use is to use it as a multimedia pc and also to use it > to learn about operating systems > > I tried the pc bsd live cd and it worked fine. I would like to hear any > comments or +experience with install on acer 5740. > configuration is as below:. > Intel i5 > 3gb ram > INSYDE BIOS 1.15 > 320GB hard disk > DVD+-RW > b/g/n wireless > > thanks, > > If it worked with the LiveCD, it will work when installed! -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Mon, 4 Oct 2010 12:34:13 +0200 Polytropon wrote: > On Sun, 3 Oct 2010 14:29:35 -0700, Robert wrote: > > Thanks for the info. I successfully did the above and now I have a > > 58.6GB file named disk.img on a UFS disk. > > > > Umm, what should I do now. Sorry for dumb question number 37 this > > weekend but I am a bit confused. Can I do just the opposite to > > another NTFS drive and end up with all the data looking like it > > should? I.E. dd from the file to an NTFS disk. > > You can now use the file as if it were a disk. To "turn it into > a device", simply do > > % mkdir mnt > % sudo mdconfig -a -t vnode -u 10 -f disk.img > % mount -o ro /dev/md10 mnt/ > > This should give you the chance to extract files from it. You > can also use fdisk on the /dev/md10 file (or any other unit > number given by -u you want to use). > I have now a free 1TB drive for use. It is formatted as UFS. Should I remove formatting before I dd the 500GB drive to it? I tried the above process and here is what I have. [r...@asus64] ~# mdconfig -a -t vnode -u 10 -f /250extra/disk.img [r...@asus64] ~# mount -o ro /dev/md10 /mnt mount: /dev/md10 : Invalid argument [r...@asus64] ~# mount_ntfs -o ro /dev/md10 /mnt mount_ntfs: /dev/md10: Input/output error [r...@asus64] ~# ls -l /dev/md* crw-r- 1 root operator0, 129 Oct 4 06:43 /dev/md10 crw-r- 1 root operator0, 130 Oct 4 06:43 /dev/md10s1 crw--- 1 root wheel 0, 66 Oct 1 14:43 /dev/mdctl [r...@asus64] ~# mount -o ro /dev/md10s1 /mnt [r...@asus64] ~# ls -l /mnt total 0 [r...@asus64] ~# df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/ad12s1d 226G 59G149G28%/250extra /dev/md10s1 451G 32G383G 8%/mnt ^^^ [r...@asus64] ~# ls -la /mnt total 0 > Warren wrote: > It will give an exact copy of the first 250G, which also means it > will not resize the 500G filesystem into a working 250G version. Same questions as above. Can I dd to a 1TB? And what format on the drive? I apologize again if I am coming off as dense. I have not used "dd" before as I have always used dump for backups. Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Sun, 3 Oct 2010 22:27:02 -0600 (MDT), Warren Block wrote: > On Sun, 3 Oct 2010, Polytropon wrote: > > > On Sun, 3 Oct 2010 10:00:51 -0700, Robert wrote: > >> I have a spare 250G hard drive. Can I use "dd" to capture 250 gigs > >> from the old drive? Using da1 and ad12 as the if and of will the result > >> be an NTFS formatted 250g drive? Will I have the same results, i.e. > >> able to mount ad12 but not ad12s1? > > > > Yes, as dd gives you an 1:1 copy of what you have. > > It will give an exact copy of the first 250G, which also means it will > not resize the 500G filesystem into a working 250G version. > > The first step would be a copy of the entire drive. Then the filesystem > can be repaired and resized. Exactly. NEVER mess with the precious data. Only read, then store away the drive. If all files are back, the drive can be cleanly reformatted and then populated with the original files. All investigation and modification tasks should be done with a copy. If you mess up a copy, get a new one. As hard disks are cheap, it might be worth buying a new one just to have enough disk space available for such tasks. Remember: Hard disks are cheap, your data isn't. :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: simplest way to get gnome/ kde up and running
Have you actually installed KDE and/or Gnome? I don't see that step included in what you say you have done. If you have not you will of course need to do that before you can configure either of them. For Gnome you will probably want the x11/gnome2 port/package while for KDE you will probably want either x11/kde3 or x11/kde4 (depending on if you want KDE 3.x or KDE 4.x) I install Gnome via the DVD package. I believe it's gnome-desktop-... (sorry, need to be back home to get the actual package name). I tried to find gnome2 in the dvd package list (not the ports), but it's not listed there. Would it come under another name? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: CYRUS IMAP cyradm core dump problem
Am Thu, Sep 23, 2010 at 03:05:30PM +0300 Reko Turja schrieb: > I applied the patch as suggested by Reko, but it seemed to make > no > difference After the patch recompiling and linking at least SASL is needed after buildworld and inatallation of new world. > removing libgssapiv2 libs however, solved my cyradm problem > > will this cause issues into the future for any other ports I may > need ti > install ? Unless you need kerberos authentication at some point, removing the libs is non-issue. I'm running in the same situation as you (see http://www.freebsd.org/cgi/getmsg.cgi?fetch=846230+852662+/usr/local/www/db/text/2010/freebsd-stable/20101003.freebsd-stable). I did tried a lot but end up in a broken make buildworld. Any ideas waht I'm doing wrong? I sadly don't have any idea if the patch applies cleanly anymore to recent 8.STABLE - I did my testing on 8.1_PRERELEASE, where the patch applied cleanly. There was some talk about updating the patch when the problem was discussed more widely, but nothing has been realised this far. I might be able to test the patch against 8.STABLE on my home system sometime this week - as of myself I just did some testing and troubleshooting back when the problem was discussed, as for myself having working Kerberos is still non-issue. Of course if Kerberos functionality is critical for you, you could try removing Kerberos from base system using /etc.src.conf and then install either kerberos from ports and then linking sasl/cyrus against that. -Reko ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 04 Oct 2010 12:01:24 +0200, "O. Hartmann" wrote: > On several FreeBSD boxes "performing portsnap fetch" updating the ports > on a regular basis, folder /var/db/portsnap/files/ gets filled over > time. Sorry for not answering your question, but allow me a little sidenote regarding the proper terminology. FreeBSD, as every UNIX OS, has *directories*, not "folders". You do also use the name "files", not "sheets of paper", don't you? :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OT: fdisk
On Saturday 02 of October 2010 20:36:40 Robert wrote: > Greetings Maybe good tool will be System Rescue CD, Linux Live distribution, it has a tool named ntfs-3g and ntfsprogs. See here: http://www.sysresccd.org/Main_Page http://www.sysresccd.org/Sysresccd-manual-en_Mounting_an_NTFS_partition_with_full_Read-Write_support > Thanks for any suggestions. Good luck! > Robert Zbigniew ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Upgrading to higher major version directly or via small steps?
On Mon, Oct 4, 2010 at 4:47 PM, c0re wrote: > Hello all! > > > I'm interested in 2 updates: > - from 6.2 to 7.3 > and > - from 6.2 to 8.1 > > Can I update directly from 6.2 to 7.3? like set RELENG_7_3 in supfile and > make csup. Or I should update to 6.4, then to 7.0, and then to 7.3? > > And same question about upgrading from 6.2 to 8.1 - can i csup directly to > 8.1? If not - why is it so? > > http://people.freebsd.org/~rse/upgrade/ -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
change MAC address for PPPoE connection
Hello I'm using PPPoE link to connect to the INTERNET. my problem is that I have to change my MAC address for my night time link. I do that using ifconfig command before connecting the night link: *killall ppp ifconfig cdce0 ether 2a:00:00:00:00:00 ppp -ddial adslnight* cdce0 is the interface connected to the ADSL modem. command will change the MAC address on the interface but PPP still uses the old MAC (I can see it over tcpdump). I think it's some cache or something that keeps the old MAC. please help me, I couldn't find anything related on-line. my ppp.conf: *adsl: set log Phase tun command set redial 99 3 set device PPPoE:cdce0 set authname UserName set authkey Password set dial set login add default HISADDR adslnight: set log Phase tun command set redial 99 3 set device PPPoE:cdce0 set authname NightUserName set authkey NightPassword set dial set login add default HISADDR* ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 4 Oct 2010 12:59:50 +0100 RW articulated: > There shouldn't be any need to do that, they are supposed to be > deleted automatically. I have 22371, if you have much more than that > you probably should remove the contents of /var/db/portsnap/ and do > another fetch. I have 22339 files on a FreeBSD 8.1/amd64 system. It might be interesting to find out how to ascertain the correct number of files that should be located there. -- Jerry ✌ freebsd.u...@seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Massive portupgrade without being interrupted by configuration screens?
Thanks to all who responded, now I have several things to think about. I will want to look at "perl-after-upgrade" script. Even if I don't use it, it would likely be helpful to see what it does and guide me as to what I can do. I also find I have a burning desire to check out pkgsrc (under NetBSD, now at 5.1 RC4) to see how it compares to FreeBSD ports. With a massive portupgrade, I may be delayed in checking and responding to email. Tom ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Cleaning /var/db/portsnap/files/, how?
On several FreeBSD boxes "performing portsnap fetch" updating the ports on a regular basis, folder /var/db/portsnap/files/ gets filled over time. I was wondering if there is not an elegant, sophisticated way cleaning up those files not needed anymore. Please shed light onto my darkness ... Regards, O. Hartmann ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 4 Oct 2010 13:24:18 +0200 Polytropon articulated: > On Mon, 04 Oct 2010 12:01:24 +0200, "O. Hartmann" > wrote: > > On several FreeBSD boxes "performing portsnap fetch" updating the > > ports on a regular basis, folder /var/db/portsnap/files/ gets > > filled over time. > > Sorry for not answering your question, but allow me a little > sidenote regarding the proper terminology. > > FreeBSD, as every UNIX OS, has *directories*, not "folders". > You do also use the name "files", not "sheets of paper", > don't you? You say po-tah-toes, he says po-tay-toes, who cares? Were you completely baffled by what he was trying to convey? At the very least, you could have attempted to answer his question before giving him a lecture that served no purpose other than to belittle the OP. By the way, in Linux and other Unix-like operating system, everything on the system is treated as being a file, and a directory is thus considered to be just a special type of file that contains a list of file names and the corresponding inodes for each file and directory that it appears to contain. An inode is a data structure on a filesystem that stores all the information about a file except its name and its actual data. Therefore, strictly speaking, he could have just referenced "file" instead. The term folder is used as a synonym for directory on the Microsoft Windows and Macintosh operating systems. -- Jerry ✌ freebsd.u...@seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 04 Oct 2010 12:01:24 +0200 "O. Hartmann" wrote: > On several FreeBSD boxes "performing portsnap fetch" updating the > ports on a regular basis, folder /var/db/portsnap/files/ gets filled > over time. I was wondering if there is not an elegant, sophisticated > way cleaning up those files not needed anymore. There shouldn't be any need to do that, they are supposed to be deleted automatically. I have 22371, if you have much more than that you probably should remove the contents of /var/db/portsnap/ and do another fetch. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cleaning /var/db/portsnap/files/, how?
On Mon, 4 Oct 2010 08:22:58 -0400 Jerry wrote: > On Mon, 4 Oct 2010 12:59:50 +0100 > RW articulated: > > > There shouldn't be any need to do that, they are supposed to be > > deleted automatically. I have 22371, if you have much more than that > > you probably should remove the contents of /var/db/portsnap/ and do > > another fetch. > > I have 22339 files on a FreeBSD 8.1/amd64 system. It might be > interesting to find out how to ascertain the correct number of files > that should be located there. $ wc -l < /var/db/portsnap/INDEX 22365 I appear to have 6 superfluous files. Perhaps some ports have been added since you last did a fetch. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
partitioning a gmirror (was Re: sysinstall vs gmirror)
binE6c8fkIE6U.bin Description: Binary data ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Upgrading to higher major version directly or via small steps?
Hello all! I'm interested in 2 updates: - from 6.2 to 7.3 and - from 6.2 to 8.1 Can I update directly from 6.2 to 7.3? like set RELENG_7_3 in supfile and make csup. Or I should update to 6.4, then to 7.0, and then to 7.3? And same question about upgrading from 6.2 to 8.1 - can i csup directly to 8.1? If not - why is it so? Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"