Re: Using 'incorrect' HD geometry.
Hi, I'm using win2k an freebsd 6.0 on my laptop too, and I've been reinstalling freebsd pretty often (I'm still tring my way to have it working, so I started with 5.4 and than moved to 4.11 and 6.0) without ever changing my win partition. As you say, I'm always prompted about incorrect geometry, I hit ok and go on, than fdisk show me something like the one you got, with ad0s1 as my win (NTFS) partition and ad0s2 as my freebsd partition. All I do at this rate is to set my ad0s1 to be my active partition (I boot both from the win 2000 booter) than I go ahead leaving the MBR as is and install freebsd in freebsd partition. Unfortunately I've never been able to keep the /usr label as is (I always delete them all and start from a auto layout), and I can't help you if you're willing to keep their data safe. I got this article as model when I first did it: http://taosecurity.blogspot.com/2004/10/dual-boot-freebsd-5.html My windows partition was out of order only once, when I forgot to set it bootable, but this is because I actually boot both OS from it: I went back to fdisk, fixed it and got my windows working with no problem. I can't tell you to go ahed with no backup... but I can say your win partition is pretty safe with freebsd fdisk. Regards Lila John Murphy ha scritto: If I just immediately 'Q'uit the darned thing will it not make any changes to global drive geometry? It would probably take me several days to get my win2k installation back to how it is now, if I lost it. All I really want is for the installer to use the freebsd slice as is. I'm tempted to just try UPGRADING but mergemaster always confuses me. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: downloading version 6 freebsd
I don't know what the problem may be: I got my iso from bittorent and it was fast, so if you can use bt you can get the torrents here ftp://ftp.freebsd.org/pub/FreeBSD/torrents/6.0-RELEASE Regards Lila T Dodds ha scritto: When I try to download Disk 1 of the iso’s for freebsd from various sites using Firefox,…the download always stops at 21,9MB ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
snd_neomagic crashes on FreeBSD 5.4
Hello! sorry for troubling you, I'm and absolute FreeBSD beginner and I need some help with configuring devices. Last week I tried to install FreeBSD on my laptop, a Omnibook 900, wich has been consdered FreeBSD Compatible long time ago. Everything was fine, at least I can access my FreeBSD login and even run KDE, but it is far from being tuned. I first notice each time I try to kldload snd_neomagic to have my sound card working I have a prompt saying: pcm0: NeoMagic 256AV mem 0xfe70-0xfe7f,0xfe0-0xfe3f irq 10 at device 0.1 on pci1 and system frozes. The same happens if i try to statically compile snd_nemagic into kernel. I started checking all IRQ and settings: I know audio must use IRQ 5 for multimedia devices, and IRQ 10 shared with cardbus and USB, for audio, I tried to add lines on device.hints but having pcm0 on pci1 is useless. vmstat -i says cbb0 and cbb1 are on irq 10, but says nothing about usb (wich works properly) or pcm I also noticed my serial port (sio0) is not probed. Any suggestion? should I try anything to debug it better? Thanks a lot Lila Here is my dmesg if anybody can found it of any use Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC module_register: module uhub/umass already exists! Module uhub/umass failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = GenuineIntel Id = 0x66a Stepping = 10 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR real memory = 100663296 (96 MB) avail memory = 88715264 (84 MB) pnpbios: Bad PnP BIOS data checksum npx0: math processor on motherboard npx0: INT 16 interface acpi0: HP-MCD CJ RSDT on motherboard acpi0: Power Button (fixed) unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported acpi_ec0: Embedded Controller: GPE 0x9 port 0x66,0x62 on acpi0 Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x8008-0x800b on acpi0 cpu0: ACPI CPU (3 Cx states) on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_lid0: Control Method Lid Switch on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: Intel 82443BX (440 BX) host to PCI bridge at device 0.0 on pci0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) pci1: multimedia, audio at device 0.1 (no driver attached) cbb0: TI1225 PCI-CardBus Bridge at device 4.0 on pci0 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 cbb1: TI1225 PCI-CardBus Bridge at device 4.1 on pci0 cardbus1: CardBus bus on cbb1 pccard1: 16-bit PCCard bus on cbb1 isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0xfcc0-0xfcdf irq 10 at device 7.2 on pci0 usb0: Intel 82371AB/EB (PIIX4) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: bridge at device 7.3 (no driver attached) acpi_tz0: Thermal Zone on acpi0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_acad0: AC Adapter on acpi0 acpi_cmbat0: Control Method Battery on acpi0 acpi_cmbat1: Control Method Battery on acpi0 fdc0: floppy drive controller (FDE) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 ppc0: ECP parallel printer port port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: ISA Option ROM at iomem 0xc-0xcbfff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 297786406 Hz quality 800 Timecounters tick every 10.000 msec TUPLE: LINKTARGET [3]: 43 49 53
snd_neomagic crashes on FreeBSD 5.4
Hello! sorry for troubling you, I'm and absolute FreeBSD beginner and I need some help with configuring devices. Last week I tried to install FreeBSD on my laptop, a Omnibook 900, wich has been consdered FreeBSD Compatible long time ago. Everything was fine, at least I can access my FreeBSD login and even run KDE, but it is far from being tuned. I first notice each time I try to kldload snd_neomagic to have my sound card working I have a prompt saying: pcm0: NeoMagic 256AV mem 0xfe70-0xfe7f,0xfe0-0xfe3f irq 10 at device 0.1 on pci1 and system frozes. The same happens if i try to statically compile snd_nemagic into kernel. I started checking all IRQ and settings: I know audio must use IRQ 5 for multimedia devices, and IRQ 10 shared with cardbus and USB, for audio, I tried to add lines on device.hints but having pcm0 on pci1 is useless. vmstat -i says cbb0 and cbb1 are on irq 10, but says nothing about usb (wich works properly) or pcm I also noticed my serial port (sio0) is not probed. Any suggestion? should I try anything to debug it better? Thanks a lot Lila Here is my dmesg if anybody can found it of any use Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC module_register: module uhub/umass already exists! Module uhub/umass failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = GenuineIntel Id = 0x66a Stepping = 10 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR real memory = 100663296 (96 MB) avail memory = 88715264 (84 MB) pnpbios: Bad PnP BIOS data checksum npx0: math processor on motherboard npx0: INT 16 interface acpi0: HP-MCD CJ RSDT on motherboard acpi0: Power Button (fixed) unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported acpi_ec0: Embedded Controller: GPE 0x9 port 0x66,0x62 on acpi0 Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x8008-0x800b on acpi0 cpu0: ACPI CPU (3 Cx states) on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_lid0: Control Method Lid Switch on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: Intel 82443BX (440 BX) host to PCI bridge at device 0.0 on pci0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) pci1: multimedia, audio at device 0.1 (no driver attached) cbb0: TI1225 PCI-CardBus Bridge at device 4.0 on pci0 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 cbb1: TI1225 PCI-CardBus Bridge at device 4.1 on pci0 cardbus1: CardBus bus on cbb1 pccard1: 16-bit PCCard bus on cbb1 isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0xfcc0-0xfcdf irq 10 at device 7.2 on pci0 usb0: Intel 82371AB/EB (PIIX4) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: bridge at device 7.3 (no driver attached) acpi_tz0: Thermal Zone on acpi0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_acad0: AC Adapter on acpi0 acpi_cmbat0: Control Method Battery on acpi0 acpi_cmbat1: Control Method Battery on acpi0 fdc0: floppy drive controller (FDE) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 ppc0: ECP parallel printer port port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: ISA Option ROM at iomem 0xc-0xcbfff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 297786406 Hz quality 800 Timecounters tick every 10.000 msec TUPLE: LINKTARGET [3]: 43 49 53
snd_neomagic crashes on FreeBSD 5.4
Hello! sorry for troubling you, I'm and absolute FreeBSD beginner and I need some help with configuring devices. Last week I tried to install FreeBSD on my laptop, a Omnibook 900, wich has been consdered FreeBSD Compatible long time ago. Everything was fine, at least I can access my FreeBSD login and even run KDE, but it is far from being tuned. I first notice each time I try to kldload snd_neomagic to have my sound card working I have a prompt saying: pcm0: NeoMagic 256AV mem 0xfe70-0xfe7f,0xfe0-0xfe3f irq 10 at device 0.1 on pci1 and system frozes. The same happens if i try to statically compile snd_nemagic into kernel. I started checking all IRQ and settings: I know audio must use IRQ 5 for multimedia devices, and IRQ 10 shared with cardbus and USB, for audio, I tried to add lines on device.hints but having pcm0 on pci1 is useless. vmstat -i says cbb0 and cbb1 are on irq 10, but says nothing about usb (wich works properly) or pcm I also noticed my serial port (sio0) is not probed. Any suggestion? should I try anything to debug it better? Thanks a lot Lila Here is my dmesg if anybody can found it of any use Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC module_register: module uhub/umass already exists! Module uhub/umass failed to register: 17 Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = GenuineIntel Id = 0x66a Stepping = 10 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR real memory = 100663296 (96 MB) avail memory = 88715264 (84 MB) pnpbios: Bad PnP BIOS data checksum npx0: math processor on motherboard npx0: INT 16 interface acpi0: HP-MCD CJ RSDT on motherboard acpi0: Power Button (fixed) unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported unknown: memory range not supported acpi_ec0: Embedded Controller: GPE 0x9 port 0x66,0x62 on acpi0 Timecounter ACPI-safe frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x8008-0x800b on acpi0 cpu0: ACPI CPU (3 Cx states) on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_lid0: Control Method Lid Switch on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: Intel 82443BX (440 BX) host to PCI bridge at device 0.0 on pci0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) pci1: multimedia, audio at device 0.1 (no driver attached) cbb0: TI1225 PCI-CardBus Bridge at device 4.0 on pci0 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 cbb1: TI1225 PCI-CardBus Bridge at device 4.1 on pci0 cardbus1: CardBus bus on cbb1 pccard1: 16-bit PCCard bus on cbb1 isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0xfcc0-0xfcdf irq 10 at device 7.2 on pci0 usb0: Intel 82371AB/EB (PIIX4) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: bridge at device 7.3 (no driver attached) acpi_tz0: Thermal Zone on acpi0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_acad0: AC Adapter on acpi0 acpi_cmbat0: Control Method Battery on acpi0 acpi_cmbat1: Control Method Battery on acpi0 fdc0: floppy drive controller (FDE) port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: 1440-KB 3.5 drive on fdc0 drive 0 ppc0: ECP parallel printer port port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: ISA Option ROM at iomem 0xc-0xcbfff on isa0 pmtimer0 on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter TSC frequency 297786406 Hz quality 800 Timecounters tick every 10.000 msec TUPLE: LINKTARGET [3]: 43 49 53
about ports reinstall
Hi, The php4 ports that I installed did not work with mysql, it seems like it never able to configure to work with mysql. No mysql info can be found with phpinfo(). I tried to reinstall php4 many times but no luck for me. I want to ask is there a way to completely remove the installed ports and related deps so that I can do a very clean install of php4 and maybe with apache and mysql. Thanks! Regards, ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
