Re: AMD Phenom II X4 temperature issues (was Re: hardware monitor)
Gary Aitken vagab...@blackfoot.net wrote: Air ducting shouldn't be a problem; I've got the side of the case off... This just might be part of the problem. Air plumbing is not as forgiving as it was in the old days. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: to gmirror or to ZFS
Steve O'Hara-Smith st...@sohara.org wrote: It's a pity there are now only two manufacturers of spinning rust. I didn't think there were _any_! Haven't oxide-coated platters gone the way of the dodo bird? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
line lengths in /etc/hosts
Is there a limit on line length in FreeBSD's /etc/hosts? I'm not finding any mention of such a limit in hosts(5), but characters beyond the first 660 or so seem to be ignored. To answer the inevitable followup why would anyone need such a long line in /etc/hosts: With this line in /etc/nsswitch.conf hosts: files dns I can easily suppress access to unwanted web sites by adding names to the localhost line in /etc/hosts, like this: 127.0.0.1 localhost localhost.my.domain bad1.com bad2.com ... My version of that line has gotten rather long :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rm -R
Joshua Isom jri...@gmail.com wrote: But google and other search engines treats words([A-Za-z0-9]) starting with - as meaning exclude results with this, even when obvious it's about unix commands. It can be rather annoying when searching for help. This comment suggests a new translation of GNU: Google's Not Unix (although it may well be _hosted on_ a Unix variant). Absent some very advanced AI, nothing is obvious to a computer :) The - character means different things in different environments. When you know what command is needed, the manpage is usually the best reference. Save the search engines for when you _don't_ know which command to use -- and even then you probably should try man -k or apropos first. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
bogus No protocol specified message
When trying to open an X application on a remote display, I am getting No protocol specified Error: cannot open display: 192.168.200.61:0 The No protocol specified message is bogus: the display is specified correctly*, and the same operation -- with exactly the same setting of DISPLAY -- was working yesterday. There's no problem with network connectivity between the two systems: ping and rlogin both work in either direction, and the specified X server is running and accepting connections. What does that message actually mean, and how do I fix it? * According to the X manpage, a non-empty hostname or IP address, separated from the display number by a single colon, specifies the use of TCP/IP communication protocol. BTW I get the same result using either the {ipaddress}:0 or the {name}:0 notation, and with or without a trailing .0; 192.168.200.61:0.0 and 192.168.200.61:0 both fail in the same way. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: wine-fbsd64 -- no longer in ports
Bernt Hansson b...@bananmonarki.se wrote: On 2012-11-17 21:36, Gary Aitken wrote: # portmaster -n emulators/wine-fbsd64 === No /usr/ports/emulators/wine-fbsd64 exists, and no information === about emulators/wine-fbsd64 can be found in /usr/ports/MOVED hints? There has never been such a port, you have to install from package. Ordinarily, packages are created by building ports. If this one is an exception, how is it created? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
regex(3) for only C locale
Where would I find functionality similar to regcomp(3) and friends, without the complexities of supporting multiple locales? I only need the C locale, and would much prefer to avoid the performance and code size costs associated with handling multi-byte characters. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
PNP0xxx can't assign resources
Do I need to do anything about these lines near the end of the dmesg? unknown: PNP0c01 can't assign resources (memory) unknown: PNP0501 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0401 can't assign resources (port) unknown: PNP0700 can't assign resources (port) unknown: PNP0f13 can't assign resources (irq) unknown: PNP0303 can't assign resources (port) The box is a Dell Optiplex GX1, and it does seem to be working OK, but I suppose this may indicate that something is not configured properly. == complete dmesg == Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #3: Mon Sep 25 21:49:18 PDT 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/GENERIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (447.69-MHz 686-class CPU) Origin = GenuineIntel Id = 0x673 Stepping = 3 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 201326592 (192 MB) avail memory = 187494400 (178 MB) kbd1 at kbdmux0 cpu0 on motherboard pcib0: Intel 82443BX (440 BX) host to PCI bridge pcibus 0 on motherboard pir0: PCI Interrupt Routing Table: 9 Entries on motherboard pci0: PCI bus on pcib0 agp0: Intel 82443BX (440 BX) host to PCI bridge mem 0xf000-0xf3ff at device 0.0 on pci0 pcib1: PCIBIOS PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0xcce0-0xccff irq 11 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: Intel 82371AB/EB (PIIX4) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: bridge at device 7.3 (no driver attached) pcib2: PCIBIOS PCI-PCI bridge at device 15.0 on pci0 pci2: PCI bus on pcib2 pci2: simple comms, generic modem at device 9.0 (no driver attached) xl0: 3Com 3c905B-TX Fast Etherlink XL port 0xcc00-0xcc7f mem 0xff00-0xff7f irq 11 at device 17.0 on pci0 miibus0: MII bus on xl0 xlphy0: 3Com internal media interface on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:b0:d0:28:ad:4f pmtimer0 on isa0 orm0: ISA Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xc on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: Enhanced floppy controller at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: 1440-KB 3.5 drive on fdc0 drive 0 ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 unknown: PNP0c01 can't assign resources (memory) unknown: PNP0501 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0401 can't assign resources (port) unknown: PNP0700 can't assign resources (port) unknown: PNP0f13 can't assign resources (irq) unknown: PNP0303 can't assign resources (port) Timecounter TSC frequency 447691600 Hz quality 800 Timecounters tick every 1.000 msec ad0: 157066MB HDT722516DLAT80 V43OA96A at ata0-master UDMA33 acd0: CDROM CRD-8400B/1.06 at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s3a ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.1 and NFS
rpc.lockd remains unreliable; avoid using it if practical. statd and lockd have been problematic ever since Sun invented them a couple of decades ago, at least partly because what they are trying to do is fundamentally not computable. (There is no way to distinguish between the other side having crashed, and a temporary network communication problem that has not yet been resolved but will be eventually. At best, you find out about the other side's crash after it has rebooted, which could be hours or days later if the crash was caused by a hardware failure.) The best solution is to avoid locking files over NFS. For example: * As pointed out in Mark Crispin's article, use IMAP (or POP) instead of having the mailserver export the spool directory. * ssh to the server to do things like adduser, rather than trying to run it on the client. File locking works reasonably well within a single system (defined as a combination of hardware and software that all crashes together :) I doubt anyone will ever get it to work all that well when the locks must be shared across a larger entity. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Crash; shutdown
So I got up and walked away from my computer this afternoon, and came back to find it in the middle of shutting down. No good reason, no crash dump (yes, they're configured) no nothing, just this: Sep 19 18:14:53 colossus syslogd: exiting on signal 15 At this point, everything sync'd up and the system shut down, completely, and powered off. I've had it suggested that this could be a power supply going south. Any other ideas? Any chance someone hit CtrlAltDel on the keyboard? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD as a kiosk system for reading/writing e-mail
- login as user 'kiosk' into FreeBSD and getting a desktop in (for example KDE); - launch a graphical MUA (for example Kmail, or a browser) which supports more than one identity, let's say [EMAIL PROTECTED], [EMAIL PROTECTED] and so on, and each user must somehow authenticate itself for the usage of its identity, at least by typing in the password for this identity; - the MUA is fetching by POP3 or IMAP the mail from some host or the underlaying FreeBSD, but they don't get mixed-up with the mails of the other identities in the folders of the MUA; The background idea is just to use the desktop, i.e. loged in once, as a kiosk for reading/writing mails of a group of people. It could likely be made to work, but offhand it sounds like reinventing the wheel. Why not just let each user log in via xdm, and have their .xsession bring up the MUA? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.2-Release schedule
I was just looking over the release schedule for the 6.2 release, a few weeks ago, there was no detailed plan, now it's there including the todo-list, http://www.freebsd.org/releases/6.2R/todo.html No critical pending issues, no show stoppers left, no required or desired features. Only some stress tests problems. So, does this mean that the page has not been updated? Usually I would expect a problem - solved list ... It means that those are the issues being tracked for the release. If you know of other serious problems you need to make them known now. Where would one find the list of problems already fixed -- hence not being tracked -- so as to know whether a given 6.1 problem needs to be pointed out? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.2-Release schedule
Where would one find the list of problems already fixed -- hence not being tracked -- so as to know whether a given 6.1 problem needs to be pointed out? http://www.freebsd.org/cgi/query-pr-summary.cgi?query It looks as if the closest that comes is to produce a list of everything fixed or abandoned since 6.0 (by leaving Category, Severity, Priority, Class as Any; setting State to Closed and Release to 6.X only) -- over 7000 entries. I was hoping for something resembling what would be in RELNOTES.TXT if 6.2 were being released today. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rebooting into single user mode on a remote server
In order to follow the upgrade instructions in the Handbook or /usr/src/UPDATING to the letter, you need console access to the machine being updated. That is [a] problem ... when it's in a hosting centre umpty dozen miles away ... There are essentially three possibilities. i) get someone local to the machine to do the bits requiring the console access ... ii) arrange to get remote console access. That can be expensive if you go down the route of buying a dedicated console server. Or it can be very cheap indeed if you have another FreeBSD box close by the machine you're trying to update and you can string null modem cables between their serial ports ... iii) Finally, and not to be dismissed without due consideration, is the really quite simple approach of /not/ taking the machine down to single user mode ... iv) (actually a variant of ii, but different enough to warrant separate mention IMO) Put a PC Weasel or similar in any machine that is going to be located remotely. This card looks like a VGA to the machine, but allows for remote access. The simple ones support only text mode via a serial port; some of the fancier ones act as X11 clients so as to also support graphics modes. This gives you access not only to the FreeBSD console, but to the BIOS. And no, I do not work for any manufacturer or supplier of such. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[SOLUTION] Re: mount_ext2fs returning ENODEV on 6.1
The standard kernel doesn't have ext2fs support now; I doubt the 6.1 release was different. Try loading it as a module; kldload ext2fs. It seems not to be that easy :( # kldload ext2fs kldload: can't load ext2fs: No such file or directory Where is ext2fs.ko supposed to have come from? A search for ext2fs in the Handbook found nothing applicable, and I have already built and installed /usr/ports/sysutils/e2fsprogs. I checked the 6.1 install disks, and saw ext2fs.ko in boot/kernel, just like I'd expect. I've rebuilt with newer sources several times since then, but I'm surprised if it isn't there on your disk. According to find, the only *.ko anywhere in the system was gtkrc.ko, in /usr/ports/x11-toolkits/linux-gtk/work/etc/gtk and /usr/X11R6/share/themes/Default/gtk. I suspect this may be additional fallout from my earlier problem, wherein sysinstall had failed to install the kernel: http://lists.freebsd.org/pipermail/freebsd-questions/2006-August/129613.html http://lists.freebsd.org/pipermail/freebsd-questions/2006-August/129659.html Evidently it also failed to install the ext2fs module. One way to fix it: # cd /usr/src/sys/modules/ext2fs # make # cp ext2fs.ko /boot/modules ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mount_ext2fs returning ENODEV on 6.1
What am I doing wrong? # ll /dev/ad0s7 crw-r- 1 root operator0, 93 Sep 4 02:30 /dev/ad0s7 # file -s /dev/ad0s7 /dev/ad0s7: Linux rev 1.0 ext2 filesystem data # grep -w ad0s7 /etc/fstab /dev/ad0s7 /linux ext2fs ro 0 0 # ll -d /linux drwxr-xr-x 2 root wheel 512 Aug 24 12:09 /linux # mount /linux mount_ext2fs: /dev/ad0s7: Operation not supported by device # uname -a FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mount_ext2fs returning ENODEV on 6.1
# ll /dev/ad0s7 crw-r- 1 root operator0, 93 Sep 4 02:30 /dev/ad0s7 # file -s /dev/ad0s7 /dev/ad0s7: Linux rev 1.0 ext2 filesystem data # grep -w ad0s7 /etc/fstab /dev/ad0s7 /linux ext2fs ro 0 0 # ll -d /linux drwxr-xr-x 2 root wheel 512 Aug 24 12:09 /linux # mount /linux mount_ext2fs: /dev/ad0s7: Operation not supported by device No ext2fs support in your kernel? I had not thought that was the problem, since according to something in the docs or manpages -- which I now cannot locate -- missing kernel support should have resulted in a different message. How would I check, to be sure? I am using the kernel from the installation CD, not one I have built: # uname -a FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mount_ext2fs returning ENODEV on 6.1
# ll /dev/ad0s7 crw-r- 1 root operator0, 93 Sep 4 02:30 /dev/ad0s7 # file -s /dev/ad0s7 /dev/ad0s7: Linux rev 1.0 ext2 filesystem data # grep -w ad0s7 /etc/fstab /dev/ad0s7 /linux ext2fs ro 0 0 # ll -d /linux drwxr-xr-x 2 root wheel 512 Aug 24 12:09 /linux # mount /linux mount_ext2fs: /dev/ad0s7: Operation not supported by device No ext2fs support in your kernel? I had not thought that was the problem, since according to something in the docs or manpages -- which I now cannot locate -- missing kernel support should have resulted in a different message. How would I check, to be sure? I am using the kernel from the installation CD, not one I have built: # uname -a FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 The standard kernel doesn't have ext2fs support now; I doubt the 6.1 release was different. Try loading it as a module; kldload ext2fs. It seems not to be that easy :( # kldload ext2fs kldload: can't load ext2fs: No such file or directory Where is ext2fs.ko supposed to have come from? A search for ext2fs in the Handbook found nothing applicable, and I have already built and installed /usr/ports/sysutils/e2fsprogs. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: unknown ethernet card
I'm beginning the install of 6.1 RELEASE on a Dell 1950. It uses Dual Embedded Broadcom NetXtreme II 5708 Gigabit Ethernet NICs, and they are not correctly recognized during the install. The system identifies them as bce0 and bce1, but apparently the driver isn't working right. Does anyone have these NICs working? If so, what driver did you use? Check out this thread: http://lists.freebsd.org/pipermail/freebsd-questions/2006-September/131194.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Postscript fonts in OpenOffice on 6.1
Has anyone gotten OpenOffice to use a Postscript printer's built-in fonts? If so, how did you do it? I haven't found the answer in the docs or FAQs, and got no response on the OpenOffice list. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[HACK-AROUND] Re: OpenOffice build crashes the compiler
This hack presumably results in a broken slidesorter, but at least Writer seems to work (after a fashion), and that's all I really need. Since the *.obj are just empty sentinel files indicating that the corresponding *.o have been built, this # cd /usr/ports/editors/openoffice.org-2.0 # touch work/OOD680_m1/sd/unxfbsdi.pro/slo/SlideSorterView.obj allows a rebuild to start *after* the failing compilation, instead of reattempting it (and crashing again). The missing module results in an undefined symbol in libsd680fi.so; to keep that from stopping the build, apply this hack to work/OOD680_m1/solenv/bin/checkdll.sh: *** checkdll.sh.origWed Apr 26 07:42:21 2006 --- checkdll.sh Wed Apr 26 07:42:21 2006 *** *** 83,89 esac $checkdll $* ! if [ $? -ne 0 ]; then exit 1 ; fi for parameter in $*; do library=$parameter; --- 83,90 esac $checkdll $* ! # message has been printed, but don't kill the build ! # if [ $? -ne 0 ]; then exit 1 ; fi for parameter in $*; do library=$parameter; ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: The Ports collection / FreeBSD CDs
Before you can build from ports, you need to have ports tree in place, the standard way to do this is by running portsnap. with the caveat that, at least in my recent experience, an up-to-date ports tree does not always play nicely with a not-updated base install from CD. OP might be better off loading the ports collection from the same CD set as the rest of the system. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: The Ports collection / FreeBSD CDs
... at least in my recent experience, an up-to-date ports tree does not always play nicely with a not-updated base install from CD. That's very interesting. However, the ports tree on the CD isn't complete, as in: not all the ports are there. Any idea why? (I am referring to the ports tree itself, i.e. the collection of skeleton directories. The set of distfiles provided on CDs 3 and 4 is necessarily incomplete, both due to limited space and because some distfiles have legal restrictions that prevent their inclusion.) I stopped installing the ports tree from the install CD a long time ago for that reason. Perhaps sysinstall's rather strong recommendation to install the ports ought to be toned down a bit, e.g. to suggest installing the ports from CD only if one does not have a high-speed Internet connection. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: OpenOffice build crashes the compiler
Making: ../../../../unxfbsdi.pro/slo/SlideSorterView.obj ... g++-ooo: Internal error: Killed: 9 (program cc1plus) ... dmake: Error code 1, while making '../../../../unxfbsdi.pro/slo/SlideSorterView.obj' '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/sd/source/ui/slidesorter/view ... Stop in /usr/ports/editors/openoffice.org-2.0. http://lists.freebsd.org/pipermail/freebsd-ports/2005-March/021822.html is an old link but has a patch. That describes the inability to build gcc-ooo itself. The current problem arose while trying to *use* gcc-ooo to build slidesorter (which I don't even need -- can it be configured out?) http://archives.mandrivalinux.com/cooker/2003-10/msg02538.php sugests some missing symlinks might be the culprit. That was while trying to build readlicense_oo, in OOo 1.something, and looks as if it may have somehow involved Java. Please let me know is either of these resolve the isses, I'm looking to get OpenOffice built this weekend after I update my basic system... Both of these reference that Error 65280 but neither involves cc1plus dying with a signal 9. The only thing I know of that causes a reproducible kill -9 is a missing shared library, but cc1plus uses only libc.so.6, which does exist: # ( cd /usr/local/gcc-ooo/i386-portbld-freebsd6.1/3.4.1/libexec/gcc/i386-portbld-freebsd6.1/3.4.1 ; ldd cc1plus ) cc1plus: libc.so.6 = /lib/libc.so.6 (0x283d5000) # ll /lib/libc.so.6 -r--r--r-- 1 root wheel 882116 May 6 20:56 /lib/libc.so.6 some answers also suggest you might be running out of space in the build directory. You'll need at least 1.8G to build Openoffice (/usr/ports); I say at least because when I built it for Gentoo on my P4 it used up more like 5G and took 8-10 hours to build. There seems to be plenty of space: # df Filesystem 1K-blocks UsedAvail Capacity Mounted on /dev/ad0s3a50763030144 436876 6%/ devfs 110 100%/dev /dev/ad0s3e507630 282 466738 0%/tmp /dev/ad0s3f 40083664 10225734 2665123828%/usr /dev/ad0s3d 114831888404 968050 8%/var BTW this is a *long* way into the build. A rerun, which doesn't need to actually build anything prior to the point of failure, generates close to 500KB of logfile and takes almost 40 minutes. The initial attempt had taken over 24 hours to reach that point. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Do I not understand shared-lib versions? (Re: OpenOffice port vs Firefox)
Having gotten a sufficiently-recent version of glib, I am now several hours into the build of OpenOffice, and I've discovered that Firefox has quit working. When I try to start it: GThread-ERROR **: file gthread-posix.c: line 187 (): error 'Invalid argument' during 'pthread_mutex_trylock' aborting... Abort trap (core dumped) Of course, since it won't start up, I can't consult Help/About to find out the version :( but based on /var/db/pkg I think it is firefox-1.5.0.1_1,1 I suppose Firefox and OpenOffice are tripping over each other WRT the version of some shared library, but I thought the whole point of having version numbers on shared libs was to prevent that sort of problem. ... I would suspect that you've hit some obscure version issue ... I seem to remember one point at which I rebuilt OOo and had to rebuild firefox to get it working, but I don't remember for sure. The Firefox is the package from the 6.1 CD set, and the OpenOffice is a current Ports build (in process). I figure to try rebuilding Firefox from its port once the OpenOffice build finishes -- it's been running for something over 16 hours now, and is currently in svx/source/svdraw. What I don't get is why a shared-lib change would manifest this way. If I understand shared-lib versioning correctly, any incompatible change to any exported API should have occasioned a change to at least the minor version number, precisely to avoid this sort of hit on an existing binary that was built to the old API. Such binaries should continue to use the old version of the shared library, no? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
OpenOffice build crashes the compiler
Anyone seen this and know how to get past it? Configuring out the failing component would be fine, if possible, since I really only need the word processor. Making: ../../../../unxfbsdi.pro/slo/SlideSorterView.obj g++-ooo -fmessage-length=0 -c -Os -fno-strict-aliasing -fvisibility=hidden -I. -I../../../../unxfbsdi.pro/inc/slsview -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solver/680/unxfbsdi.pro/inc/offuh -I../inc -I../../inc -I../../../../inc/pch -I../../../../inc -I../../../../unx/inc -I../../../../unxfbsdi.pro/inc -I. -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solver/680/unxfbsdi.pro/inc/stl -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solver/680/unxfbsdi.pro/inc/external -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solver/680/unxfbsdi.pro/inc -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solenv/unxfbsdi/inc -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solenv/inc -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/res -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solver/680/unxfbsdi.pro/inc/stl -I/usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/solenv/inc/Xp31 -I/usr/local/diablo-jdk1.5.0/include -I/u! sr/local/diablo-jdk1.5.0/include/ In file included from /usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/sd/source/ui/slidesorter/view/SlideSorterView.cxx:54: ../../inc/DrawDocShell.hxx: In member function `void sd::DrawDocShell::SetSpecialProgress(SfxProgress*, Link*)': ../../inc/DrawDocShell.hxx:189: warning: declaration of 'pProgress' shadows a member of 'this' g++-ooo: Internal error: Killed: 9 (program cc1plus) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. dmake: Error code 1, while making '../../../../unxfbsdi.pro/slo/SlideSorterView.obj' '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /usr/ports/editors/openoffice.org-2.0/work/OOD680_m1/sd/source/ui/slidesorter/view dmake: Error code 1, while making 'build_instsetoo_native' '---* *---' *** Error code 255 Stop in /usr/ports/editors/openoffice.org-2.0. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
OpenOffice port vs Firefox
Having gotten a sufficiently-recent version of glib, I am now several hours into the build of OpenOffice, and I've discovered that Firefox has quit working. When I try to start it: GThread-ERROR **: file gthread-posix.c: line 187 (): error 'Invalid argument' during 'pthread_mutex_trylock' aborting... Abort trap (core dumped) Of course, since it won't start up, I can't consult Help/About to find out the version :( but based on /var/db/pkg I think it is firefox-1.5.0.1_1,1 I suppose Firefox and OpenOffice are tripping over each other WRT the version of some shared library, but I thought the whole point of having version numbers on shared libs was to prevent that sort of problem. Does anyone have Firefox and OpenOffice coexisting on a single system? How is it accomplished? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
If you installed programs from packages when you installed the system, you may get problems with version conflicts installing from an updated ports collection - this happens usually when the last release is getting old. In that case, maybe you should clean out the system, deinstall all packages, update ports and start again. This takes time but given that 6.2 is coming up. It would also thoroughly defeat the purpose of installing from CD! Not hardly. It doesn't even come close to it. There's likely more involved than is immediately apparent, but my take on it is that, out of a 4-CD set, I'd be using only a small portion of the first -- and none of the others -- if I backed out to what sounds like a minimal install and then built everything from online Ports. I was planning to install a STABLE release and stay with it, as mentioned on http://www.freebsd.org/doc/en_US.ISO8859-1/articles/version-guide/decision-points.html rather than get on the cvsup treadmill. ... I would also like to point out that when you ask for help on questions@ and someone asks you a question, if you have the information it should be given, even if it was already posted on another list. I'm pretty sure that most of us don't follow all of the possible lists. So, even if I did follow the gnome list, if you said something is already posted there, that's too bad, I'm not about to do a lot of extra work trying to help you out. That's time I can put to better use working on my own equipment, or helping someone who will work with me to help them. My intent was to avoid cluttering the questions@ archives with a rather large post that would add very little value, being a duplicate of one that is already in another list's archives: http://docs.freebsd.org/cgi/mid.cgi?10609020201.AA11586 Sorry if this was not clear. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
FreeBSD and Linux will not meet your teenagers needs, If you really want to introduce your kid to UNIX then buy a Mac... trust me on this... I interact with many high school and college kids on a daily basis. Any used Mac capable of running Mac OS X 10.4 Tiger and NeoOffice2 will suit your childs needs perfectly: PowerPC G3, G4, or G5 processor. Built-in FireWire. 384 MB of memory. 5 GB of disk space. It is less a matter of want to introduce to Unix than want to avoid Windoze :) and yes, a Mac with OS X would be fine. (My college sophomore is doing just fine with a one-year-old iBook.) Just keep in mind when you look for used Mac's that the Tiger OS normally on DVD ... If you can find an older copy of Panther OS it gives you lot more lattitude in what older Macs will work - it also does not require FireWire, so even the original iMacs will run it. Is Panther an earlier MacOS X (thus still marginally on-topic here :) or it MacOS 9? I have actually got an old PowerMAC (603-based) which AFAIK won't run anything newer than 9. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
By the way, Openoffice does work nicely on FreeBSD 6.1 and Gnome is not needed for it at all. Gnome is irrelevant to Openoccife. The Ports build of OpenOffice seems to require glib, which seems to be maintained by the gnome folks even if it is not, strictly speaking, part of gnome. If there is a build-time option to use something else instead, it would be nice for the choice to come up on one of those blue option screens when building the port. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backing up
I think FreeBSD supports ext2 better than Linux supports UFS. This is a ways down my priority list, but since the subject has come up :) It is not working for me at all (in 6.1): # ll /dev/ad0s7 crw-r- 1 root operator0, 93 Sep 4 02:30 /dev/ad0s7 # file -s /dev/ad0s7 /dev/ad0s7: Linux rev 1.0 ext2 filesystem data # grep -w ad0s7 /etc/fstab /dev/ad0s7 /linux ext2fs ro 0 0 # ll -d /linux drwxr-xr-x 2 root wheel 512 Aug 24 12:09 /linux # mount /linux mount_ext2fs: /dev/ad0s7: Operation not supported by device # uname -a FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 What am I doing wrong? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Word processor for 6.1
Anyone know where I can find a working word processor for 6.1? AbiWord and OpenOffice both require Gnome, which won't build. richtext builds OK, but as soon as I try to select bold it writes 4 lines to stderr and drops core: Message backtrace: bold bold OutOfBounds: offset 0, size 0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
Anyone know where I can find a working word processor for 6.1? AbiWord and OpenOffice both require Gnome, which won't build. What do you mean: which won't build? No problems here - I recently compiled both. They don't require the full gnome package. Both of them (and also Dia) require Glib, which won't build for me. I posted details of the failure to freebsd-gnome a day or two ago. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
Anyone know where I can find a working word processor for 6.1? ... You can go to http://porting.openoffice.org/freebsd/ and download openoffice2.0.3 pre-built binaries from there. I would suggest that, rather than trying to build it. Thanks for the pointer. That is the sort of thing I was hoping for. You're probably going to need java. I suggest getting the pre-built binary for diablo-jdk-1.5.0.07.00, you can get it here: http://www.freebsdfoundation.org/downloads/java.shtml The diablo port appeared to build OK as a dependency :) but I should probably d/l this one also just in case. Try to save yourself as much pain as possible. Building openoffice from ports tends to fall in the category of pain. So it would seem :( I thought the whole point of the Ports Collection was to avoid this sort of problem. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
Anyone know where I can find a working word processor for 6.1? AbiWord and OpenOffice both require Gnome, which won't build. ... KOffice 1.5 has OpenDocument support. Not that I'm any more eager to get into a KDE mess than a Gnome mess :) File format support is not important. I just need something for my 9th-grader to use for school papers. What's in your /etc/make.conf file # added by use.perl 2006-08-22 20:05:56 PERL_VER=5.8.8 PERL_VERSION=5.8.8 what part of gnome won't build? Details are on freebsd-gnome. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Word processor for 6.1
Anyone know where I can find a working word processor for 6.1? AbiWord and OpenOffice both require Gnome, which won't build. What do you mean: which won't build? No problems here - I recently compiled both. They don't require the full gnome package. Both of them (and also Dia) require Glib, which won't build for me. I posted details of the failure to freebsd-gnome a day or two ago. Looking at that post it seems something failed when you tried to update your ports collection. I suspect the blunder was in trying to update Ports at all, given it is a new 6.1 CD install and nothing *else* is updated. The Handbook suggests to always update Ports before trying to fetch/build anything, but that does not seem to have worked out very well in this case. I'd suggest you delete it (keep distfiles though so you won't have to fetch again), unpack again the ports.tgz, then install cvsup and update the ports collection using that. I hesitate to get onto the cvsup treadmill -- from reading the website, tracking CURRENT did not sound like my desired usage model. I suspect what I really need is to have the entire Ports mechanism, including any downloaded distfiles, frozen as of 6.1-RELEASE. Unfortunately, the Handbook does not seem to cover that situation, at least in the Ports section. If you installed programs from packages when you installed the system, you may get problems with version conflicts installing from an updated ports collection - this happens usually when the last release is getting old. In that case, maybe you should clean out the system, deinstall all packages, update ports and start again. This takes time but given that 6.2 is coming up. It would also thoroughly defeat the purpose of installing from CD! I wonder if I ought to wipe the partitions and start completely over with a fresh install, and this time *don't* try to update the Ports. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Conrad
I am interested in downloadind the 2 disks for linux, and trying to install them on my computer, but I am not sure what i have to download, could comeone please help me You may be asking the wrong list. FreeBSD is not Linux, although it can run many Linux binaries if configured appropriately. For Linux, you probably want to be looking into something along the lines of Debian, Fedora, Gentoo, Mandrake, or Suse. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[PARTIAL SOLUTION] Re: Trouble building abiword in the Ports Collection
# pkgdb -F --- Checking the package registry database [Updating the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument; rebuild needed] [Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument: Cannot update the pkgdb!]: Cannot update the pkgdb!] OK, navigate to the /var/db/pkg directory and either delete or rename the 'pkg.db' file. Then run: pkgdb -aFfuv Assuming that works, resume with the rest of the directions I gave you previously. That enabled the portupgrade to succeed, but abiword still fails. I've sent the logs to freebsd-gnome. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Trouble building abiword in the Ports Collection
What I have done: * Installed 6.1, including the Ports Collection, from CD. * Ran portsnap fetch. * Attempted portsnap update. ? It sez this only works after an extract. What is the point of installing the collection from CD if it has to be completely reinstalled from a download anyway? * Ran portsnap extract. * Built richtext, apparently successfully. * Attempted to build abiword. It complained about a glibc version problem, and said to run gnomelogalyzer.sh. gnomelogalyzer.sh found nothing specific, but said to run 'portupgrade -a' on general principles. ? Why should this be needed? Shouldn't a freshly-downloaded portsnap already be up to date? * Attempted 'portupgrade -a'. It ran for several hours, fetching and building a huge amount of stuff (most of which I don't think I want), and pausing several times for answers to imponderable configuration questions, before eventually failing. ? Shouldn't those configuration screens have a help function, for those of us who have no clue what some of the options amount to? * Reran 'portupgrade -a' to get a smaller logfile, showing only the errors (since presumably the successful builds won't be redone). This time it complains about the pkgdb. ? Now what? Is it time to rm -rf /usr/ports /var/db/pkg and start completely over (and if so, what should I do differently this time)? === logfile from second 'portupgrade -a' === # date ; portupgrade -a ; date Fri Sep 1 10:34:20 PDT 2006 [Updating the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument; rebuild needed] [Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ... [Updating the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument; rebuild needed] [Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument: Cannot update the pkgdb!]: Cannot update the pkgdb!] Command failed [exit code 1]: /usr/local/sbin/pkgdb -aFQ Fri Sep 1 10:34:24 PDT 2006 # ls -l /var/db/pkg/pkgdb.db -rw-r--r-- 1 root wheel 5963776 Sep 1 01:42 /var/db/pkg/pkgdb.db # file /var/db/pkg/pkgdb.db /var/db/pkg/pkgdb.db: Berkeley DB 1.85/1.86 (Btree, version 3, native byte-order) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Trouble building abiword in the Ports Collection
* Reran 'portupgrade -a' ... This time it complains about the pkgdb. ? Now what? Is it time to rm -rf /usr/ports /var/db/pkg and start completely over (and if so, what should I do differently this time)? Try this. Run everything as root. pkgdb -aFfuv That should fix most if not all problems. No such luck. It still complains about the file format: # pkgdb -aFfuv --- Updating the pkgdb [Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument: Cannot update the pkgdb!] If it fails, you will have to run: pkgdb -F to fix them manually. That doesn't work either :( # pkgdb -F --- Checking the package registry database [Updating the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument; rebuild needed] [Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ... /var/db/pkg/pkgdb.db: unexpected file type or format -- Invalid argument: Cannot update the pkgdb!]: Cannot update the pkgdb!] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Too many Xorg modes
In 6.1, how would I set up xorg.conf to restrict Xorg to a few specific modes? The Xorg.8.log created during xorgcfg shows 24 modelines, but when I cycle through the modes using CtrlAltPlus there are two which don't work at all and the remaining 22 cover only 8 resolutions (of which only about 3 seem likely to actually be useful.) I don't know if there is an easier way, but I just copy the modelines I like from the log and paste them in the xorg.conf file. Put them in the Monitor section. That is exactly what I did. To address your second paragraph: in my case at least, including explicit modelines suppresses the automatic modes. I only get the ones explicitly listed. This has worked in both XFree86 and Xorg. In my case, using 6.1 Xorg, the only automatic modes suppressed were those whose resolutions matched one of the explicit modelines (and this is consistent with my reading of the 6.1 xorg.conf(5) manpage). Perhaps this behavior is different than earlier releases. The primary problem is that the highest-resolution automatic mode (1280x960) does not work: the (LCD) monitor displays a message to the effect that the input sync frequency is out of range, and goes into standby after about 20 seconds. This bad mode is used as the initial mode since it has the highest resolution, and there is no correct modeline that I can provide to override it because the resolution exceeds the monitor's capabilities; so the server always starts up in a non-working mode. I can get to a working mode with CtrlAltPlus, but then the desktop (which was sized according to the initial, invalid, resolution) is too big for the screen. I suspect I may have run into an Xorg (or driver) bug -- the probe did correctly identify the monitor as a Gateway FPD1530, and this should have caused all resolutions exceeding 1024x768 to be discarded -- but how do I get around it? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Too many Xorg modes
In 6.1, how would I set up xorg.conf to restrict Xorg to a few specific modes? The Xorg.8.log created during xorgcfg shows 24 modelines, but when I cycle through the modes using CtrlAltPlus there are two which don't work at all and the remaining 22 cover only 8 resolutions (of which only about 3 seem likely to actually be useful.) A search for modeline in the docs and manpages turned up nothing applicable beyond xorg.conf(5), which does not describe how to prevent the implicit inclusion of built-in modes whose names do not match any explicitly-specified modes. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new 6.1 install will not boot
Recommend you get a [bigger|second] disk if you can though, or housecleaning will be a constant chore. I got it more or less working, although not completely set up, and then that 10GB disk died: click -- kerthunk -- click -- kerthunk continuously, even after cycling power, even with only the power connected :( After replacing it with a 160GB Hitachi, and reinstalling Windoze, Linux, and FreeBSD (in that order, as before), I seem to be back at square one -- FreeBSD won't boot -- but the details are different. Partition Commander now has: Ptnsize - type - 1st sector # of sectors P0 250M FAT32 0x0B 63514017 P1 7M Linux ext2 0x83 514080 16065 P2 41.99G Unix 0xA5 530145 88068330 P3 85.75G Extended 0x0F88598475 179831610 L0 43.75G FAT32 0x0B88598538 91763217 L1 400M Linux swap 0x82 180361818819252 L2 41.60G Linux ext2 0x83 181181133 87248952 Sysinstall had not commented about the geometry with the 10GB disk, but it did this time; and as suggested I let it do what it wanted. The Dell BIOS will not tell me what it thinks the geometry is -- it just says the drive is EIDE -- so I have no direct way of verifying sysinstall's geometry; however the first BIOS partition is a working FAT32 and per the instructions that should be enough for sysinstall to have gotten it right. (The second BIOS partition is a Linux /boot, which also works.) The install appeared to succeed, and the FreeBSD boot manager does successfully boot Windoze and Linux, but all attempts to boot FreeBSD from the hard disk fail. The following was transcribed by hand, so there might be some typos; and I've added some notes to the right of the lsdev output. I've also confirmed, using the loader's ls, that there is no visible file named 'kernel' in the root directory, nor anywhere under /boot, /rescue, or /sbin. Where is it supposed to come from, and how do I get it where it needs to be without reinstalling the whole thing *yet again*? F1 DOS F2 Linux F3 FreeBSD Default: F3 BTX loader 1.00 BTX version is 1.01 Consoles: internal video/keyboard BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 640kB/195584kB available memory acpi: bad RSDP checksum (210) FreeBSD/i386 bootstrap loader, Revision 1.1 ([EMAIL PROTECTED], Sun May 7 03:20:03 UTC 2006) Loading /boot/defaults/loader.conf Unable to load a kernel! / can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. OK lsdev cd devices: disk devices: disk0: BIOS drive A: disk1: BIOS drive C: disk1s1: FAT32 # C: disk1s2: ext2fs # Linux /boot disk1s3a: FFS # FreeBSD / disk1s3b: swap disk1s3d: FFS # FreeBSD /var disk1s3e: FFS # FreeBSD /tmp disk1s3f: FFS # FreeBSD /usr disk1s4: Unknown fs: 0xf# contains FAT32 D:, Linux swap and / pxe devicde: OK ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new 6.1 install will not boot
Well, you're at least as far as having the disk sliced up in a workable way, or the bootstrap wouldn't start at all. This jumps out as not only being bad, but happening right before meltdown. acpi: bad RSDP checksum (210) I suspect it's a red herring, since I was getting that message at that point when everything was working (with the 10GB drive). It's a little hard to visualize how ACPI troubles could cause this behavior anyway. The loader is apparently able to read /boot/defaults/loader.conf, and ls finds a reasonable-looking collection of stuff, just no file named 'kernel'. If ACPI -- or anything else -- were interfering with drive access, I'd expect to see a garbled directory structure, or nothing at all. After a CD boot, is there a reasonably simple way to have sysinstall reinstall just the kernel -- or the package containing it -- without starting completely over? Have you got the latest Dell BIOS for this hardware? If not you may be SOL if they don't support this hardware any more. I expect the GX1 is well past Dell's official EOL, but they may still have the files downloadable on their support site. The BIOS version is A08. Dunno if it is the latest, but I do have ACPI turned off in the BIOS. I guess it is arguably a BIOS bug for an RSDP to exist when ACPI is disabled, and/or a FreeBSD bug to be complaining about ACPI when it is disabled. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new 6.1 install will not boot
After a CD boot, is there a reasonably simple way to have sysinstall reinstall just the kernel -- or the package containing it -- without starting completely over? Yeah, see what Derek wrote. Never done that, myself, or even heard of the kernel not getting installed. What Derek wrote? I haven't gotten that. What I did (for the archives): Make note of root partition. One way to find it is (at the OK prompt after the boot failure) more /etc/fstab Boot CD Get into Fixit mode Mount root partition on /mnt mkdir /mnt/boot/kernel cp /dist/boot/kernel/kernel /mnt/boot/kernel Granted that's the install kernel, which may not be all that great for general use, but it works well enough to get back to the X-config trouble I was having before the disk died (which is likely to become a new thread here -- xorgcfg is producing a blizzard of unresolved symbol messages when trying to load drivers; the mouse doesn't work; the keypad-based mouse emulator works after a fashion but I can't figure how to tell it ok, done; ...). ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new 6.1 install will not boot
The BIOS clears the screen and loads the boot sector, then nothing. I'm not sure exactly what the problem is, but I can say I've installed FreeBSD x.y on just about every flavor of Dell hardware without much trouble, so it should work for you. Disclaimer: the Dimension line is highly variable re: component types, chip versions and overall quality, so all bets are off there, even though all the pieces are generally mainstream hardware. It's an Optiplex GX1, with 192MB/10GB. Did you install using the default/suggested disk geometry and slice arrangement, or did you try to tune things as the installer went along? I didn't try to mess with the geometry, but I didn't give FreeBSD the whole disk -- I intend for it to coexist with Linux and a FAT32 OS. I also adjusted the subpartitioning (and this seems to be necessary -- see below). Try this: Reinstall, and if prompted about disk geometry problems just let the installer do what it wants to. When prompted to choose a disk location to install to, choose A for Use Entire Disk, and when prompted to slice up that disk area, choose A again for Auto Defaults. When prompted for a boot manager, choose to install the FreeBSD MBR. It worked better this time. I suspect the important difference was that I let it install the FreeBSD MBR (with considerable misgivings, given the onscreen caution about PC-DOS -- but the FreeBSD boot manager does seem to boot Windoze without problems). Unfortunately, it looks as if I'll have to do it *again* because the default /usr size was quite a bit too small -- even though sysinstall had over 3GB to start with. Using the default allocation of that 3GB, and selecting a Developer configuration (including ports), the install stopped with Couldn't create directory /usr/compat: No space left on device. df confirms that /usr is full (and the considerably larger /var is nearly empty): Filesystem 1K-blocksUsed Avail Capacity Mounted on /dev/ad0s3a507630 35212 431808 8%/ devfs 1 1 0 100%/dev /dev/ad0s3e507630 12 467008 0%/tmp /dev/ad0s3f832504 811572 -45668 106%/usr /dev/ad0s3d 1190350 248 1094874 0%/var In case it matters, uname -a reports: FreeBSD gx1 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 Evidently I need to make /, /tmp, and /var quite a bit smaller, so as to enlarge /usr. ... if you still have problems describe to the list the end result you're trying to achieve by your tuning. The first goal is to finish the install without running out of space :) I'd prefer to also arrange for FreeBSD to share the Linux swap space -- thus freeing up more space for /usr or /home by eliminating ad0s3b -- rather than leaving the Linux swap unused when FreeBSD is running. I've found some mentions of Linux swap partitions in the FreeBSD source code, so I suspect that this might be possible, but I didn't find any mention in the docs of how to do it. The drive currently has three primary partitions (Linux /boot, FAT32, FreeBSD) and an extended partition containing Linux swap and Linux root. Partition Commander (commercial) shows the disk layout as Ptn size - type - 1st sector # of sectors P1 7M Linux ext2 0x83 63 16002 P0 2.44G FAT32 0x08 16128 5124672 P2 3.34G Unix 0xA5 5140800 7020405 P3 3.73G Extended 0x0F12161205 7823655 L0392M Linux swap 0x8212161268 803187 L1 3.34G Linux ext2 0x8312964518 7020342 To answer one forseeable question before it is asked :) I have quite a bit of Un*x experience, but have not done much system setup or administration since SunOS 4.1. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: new 6.1 install will not boot
Do you get the FreeBSD boot menu ? Pramod Venugopal [EMAIL PROTECTED] No. The BIOS clears the screen and loads the boot sector, then nothing. On Aug 14, 2006, at 7:24 PM, Perry Hutchison wrote: I've just installed FreeBSD 6.1 on a Dell Pentium III, and I must have done something wrong -- or missed a step -- somewhere along the way. When trying to boot, I do not get even as far as the situation described in sec. 4.2.5 of the installation instructions. The system hangs, with a completely blank screen and the curson on (I think) the second line, immediately after the BIOS loads the boot record from the FreeBSD partition. Keyboard input is ignored except for CtrlAltDel, which reboots and hangs again the same way. Booting a Windows 98 CD and running fdisk confirms that the FreeBSD partition is active. ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
new 6.1 install will not boot
I've just installed FreeBSD 6.1 on a Dell Pentium III, and I must have done something wrong -- or missed a step -- somewhere along the way. When trying to boot, I do not get even as far as the situation described in sec. 4.2.5 of the installation instructions. The system hangs, with a completely blank screen and the curson on (I think) the second line, immediately after the BIOS loads the boot record from the FreeBSD partition. Keyboard input is ignored except for CtrlAltDel, which reboots and hangs again the same way. Booting a Windows 98 CD and running fdisk confirms that the FreeBSD partition is active. I'm not even getting anywhere trying to read the documentation: I can still boot from the FreeBSD CD, but if I try to view the HTML docs from the Doc menu it says this can only be done after the system is installed. (The system *has* been installed, it just won't boot!) Is there any way to recover from this? Even if I were to start completely over I would have no clue what to do differently. If it were a Linux installation I would try booting from floppy, but I did not see any chance during the FreeBSD installation to create a boot floppy. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]