Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
On 22 Nov 2003 09:20:09 -0500 Lowell Gilbert <[EMAIL PROTECTED]> wrote: "toor" <[EMAIL PROTECTED]> writes: On 21 Nov 2003 09:06:31 -0500 Lowell Gilbert <[EMAIL PROTECTED]> wrote: >"toor" <[EMAIL PROTECTED]> writes: > >> When I begin setup I see next message: >> eisa0: on motherboard >> eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 >> Fatal trap 9: general protection fault while in kernel mode >> instruction pointer = 0x58:0x81d1 >> stack pointer = 0x10:0xeb8 >> frame pointer = 0x10:0xf0e >> code segment= base 0xc00f, limit 0x, type 0x1b >> = DPL 0, pres 1, def32 0, gran 0 >> processor elfags= interrupt enabled, resume, IOPL = 0 >> current process = 0 (swapper) >> trap number = 9 >> panic: general protectin fault >> What must I do to setup freeBSD to my notebook. > >Do you need 5.1? >http://www.freebsd.org/releases/5.1R/early-adopter.html You mean that I must install FreeBSD ver 4.9 RELEASE??? I don't mean that at all. Just that you should be aware that FreeBSD 5.x is not intended for production use at this time. I install FreeBSD 5.1 RELEASE, I patch pnpbios function in bios.c and bild kernel. When I can boot and install to my notebook. As it proved, boot image from CDROM/floppies/boot.flp content bad kernel or mfsroot, because when I install and reboot - FreeBSD 5.1 RELEASE will load successfully:). ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
Well I will come right out and say it. Yes you should be using version 4.9, it's the current production version. All of the 5.x versions are used by the development team to test code changes to the basic system and your problem may be caused because of this testing environment. The odds are in your favor that the install will work if you install version 4.9. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Lowell Gilbert Sent: Saturday, November 22, 2003 9:20 AM To: toor Cc: [EMAIL PROTECTED] Subject: Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK "toor" <[EMAIL PROTECTED]> writes: > On 21 Nov 2003 09:06:31 -0500 > Lowell Gilbert <[EMAIL PROTECTED]> wrote: > >"toor" <[EMAIL PROTECTED]> writes: > > > >> When I begin setup I see next message: > >> eisa0: on motherboard > >> eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 > >> Fatal trap 9: general protection fault while in kernel mode > >> instruction pointer = 0x58:0x81d1 > >> stack pointer = 0x10:0xeb8 > >> frame pointer = 0x10:0xf0e > >> code segment= base 0xc00f, limit 0x, type 0x1b > >> = DPL 0, pres 1, def32 0, gran 0 > >> processor elfags= interrupt enabled, resume, IOPL = 0 > >> current process = 0 (swapper) > >> trap number = 9 > >> panic: general protectin fault > >> What must I do to setup freeBSD to my notebook. > > > >Do you need 5.1? > >http://www.freebsd.org/releases/5.1R/early-adopter.html > > You mean that I must install FreeBSD ver 4.9 RELEASE??? I don't mean that at all. Just that you should be aware that FreeBSD 5.x is not intended for production use at this time. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
"toor" <[EMAIL PROTECTED]> writes: > On 21 Nov 2003 09:06:31 -0500 > Lowell Gilbert <[EMAIL PROTECTED]> wrote: > >"toor" <[EMAIL PROTECTED]> writes: > > > >> When I begin setup I see next message: > >> eisa0: on motherboard > >> eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 > >> Fatal trap 9: general protection fault while in kernel mode > >> instruction pointer = 0x58:0x81d1 > >> stack pointer = 0x10:0xeb8 > >> frame pointer = 0x10:0xf0e > >> code segment= base 0xc00f, limit 0x, type 0x1b > >> = DPL 0, pres 1, def32 0, gran 0 > >> processor elfags= interrupt enabled, resume, IOPL = 0 > >> current process = 0 (swapper) > >> trap number = 9 > >> panic: general protectin fault > >> What must I do to setup freeBSD to my notebook. > > > >Do you need 5.1? > >http://www.freebsd.org/releases/5.1R/early-adopter.html > > You mean that I must install FreeBSD ver 4.9 RELEASE??? I don't mean that at all. Just that you should be aware that FreeBSD 5.x is not intended for production use at this time. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
On 21 Nov 2003 09:06:31 -0500 Lowell Gilbert <[EMAIL PROTECTED]> wrote: "toor" <[EMAIL PROTECTED]> writes: When I begin setup I see next message: eisa0: on motherboard eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x58:0x81d1 stack pointer = 0x10:0xeb8 frame pointer = 0x10:0xf0e code segment= base 0xc00f, limit 0x, type 0x1b = DPL 0, pres 1, def32 0, gran 0 processor elfags= interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) trap number = 9 panic: general protectin fault What must I do to setup freeBSD to my notebook. Do you need 5.1? http://www.freebsd.org/releases/5.1R/early-adopter.html You mean that I must install FreeBSD ver 4.9 RELEASE??? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
toor wrote: > When I begin setup I see next message: > eisa0: on motherboard > eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 > Fatal trap 9: general protection fault while in kernel > mode > instruction pointer = 0x58:0x81d1 > stack pointer = 0x10:0xeb8 > frame pointer = 0x10:0xf0e > code segment= base 0xc00f, limit 0x, type > 0x1b > = DPL 0, pres 1, def32 0, gran 0 > processor elfags= interrupt enabled, resume, IOPL = 0 > current process = 0 (swapper) > trap number = 9 > panic: general protectin fault > > What must I do to setup freeBSD to my notebook. > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" Try typing this at the loader prompt: set hw.pci.allow_unsupported_io_range="1" And then 'boot'. You can type '?' for help. If that doesn't work, then try posting to either -CURRENT or -MOBILE. Perhaps someone there can be of more help. -- Jesse Guardiani, Systems Administrator WingNET Internet Services, P.O. Box 2605 // Cleveland, TN 37320-2605 423-559-LINK (v) 423-559-5145 (f) http://www.wingnet.net ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: About setup FreeBSD 5.1 RELEASE to Sony notebook PCG-R505GCK
"toor" <[EMAIL PROTECTED]> writes: > When I begin setup I see next message: > eisa0: on motherboard > eisa0: unknown card [EMAIL PROTECTED] (0x0808) at slot 1 > Fatal trap 9: general protection fault while in kernel mode > instruction pointer = 0x58:0x81d1 > stack pointer = 0x10:0xeb8 > frame pointer = 0x10:0xf0e > code segment= base 0xc00f, limit 0x, type 0x1b > = DPL 0, pres 1, def32 0, gran 0 > processor elfags= interrupt enabled, resume, IOPL = 0 > current process = 0 (swapper) > trap number = 9 > panic: general protectin fault > > What must I do to setup freeBSD to my notebook. Do you need 5.1? http://www.freebsd.org/releases/5.1R/early-adopter.html ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"