RE: Wireless PCI card setup
Can you just paste dmesg -a? Righty-O: --G. Held -- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC2 #0: Mon Dec 22 07:23:48 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e1000. mptable_probe: MP Config Table has bad signature: Mou Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) (1094.15-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc040 real memory = 536805376 (511 MB) avail memory = 511774720 (488 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 16 entries at 0xc00fde60 pcib0: at pcibus 0 on motherboard pci0: on pcib0 agp0: mem 0xe000-0xe3ff at device 0.0 on pci0 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xeb003000-0xeb003fff irq 5 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xeb004000-0xeb004fff irq 11 at device 2.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: at device 2.2 (no driver attached) pci0: at device 4.0 (no driver attached) pci0: at device 6.0 (no driver attached) pcib1: at device 8.0 on pci0 pci1: on pcib1 pci_cfgintr: 1:7 INTA BIOS irq 5 pci_cfgintr: 1:9 INTA BIOS irq 11 pci_cfgintr: 1:10 INTA BIOS irq 11 pci1: at device 7.0 (no driver attached) rl0: port 0xc000-0xc0ff mem 0xea01-0xea0100ff irq 11 at device 9.0 on pci1 rl0: Ethernet address: 00:40:05:85:ee:cc miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: port 0xc400-0xc4ff mem 0xea011000-0xea011fff irq 11 at device 10.0 on pci1 ahc0: Host Adapter Bios disabled. Using default SCSI device parameters aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs atapci0: port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcib2: at device 30.0 on pci0 pci2: on pcib2 pci_cfgintr: 0:30 INTA routed to irq 11 pcib2: slot 0 INTA is routed to irq 11 pci2: at device 0.0 (no driver attached) orm0: at iomem 0xd4000-0xd57ff,0xd-0xd3fff,0xc-0xcefff on isa0 pmtimer0 on isa0 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 unknown: can't assign resources (port) unknown: can't assign resources (irq) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (port) Timecounter "TSC" frequency 1094147174 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc48ef660 ad0: 29311MB [59554/16/63] at ata0-master UDMA66 acd0: CDROM at ata1-master PIO3 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a ath0: mem 0xea00-0xea00 irq 5 at device 7.0 on pci1 ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:0d:88:8b:d2:c7 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G. Held Sent: Monday, January 05, 2004 5:07 PM To: [EMAIL PROTECTED] Subject: Wireless PCI card setup Greetings, I have a D-Link DWL-G520 PCI card that I am trying to install, with less success than I would like. I am using FreeBSD 5.2-RC2. I have been able to bring the card up manually with ifconfig for an Athero
Re: Wireless PCI card setup
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 05 January 2004 12:02 pm, G. Held wrote: Is your wireless router setup to be DHCP on the cat5 end? Also - I have had more luck using AP's instead of routers. Just my .02 Chris > >Can you just paste dmesg -a? > > Righty-O: > - -- Best regards, Chris -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQE/+aoFD5P/gMAbw2MRAgjWAJ4r0P+ZGup7UCxSvgOSEMNv+wGJWACdGjch D9wdicu/XJzZwWh7jmeISRA= =XolH -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Wireless PCI card setup
On Monday 05 January 2004 12:02 pm, G. Held wrote: > >Can you just paste dmesg -a? > > Righty-O: > > > --G. Held > -- > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2-RC2 #0: Mon Dec 22 07:23:48 GMT 2003 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e1000. > mptable_probe: MP Config Table has bad signature: Mou > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) (1094.15-MHz 686-class CPU) >Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 > > Features=0x383fbff,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc040 > real memory = 536805376 (511 MB) > avail memory = 511774720 (488 MB) > Pentium Pro MTRR support enabled > npx0: [FAST] > npx0: on motherboard > npx0: INT 16 interface > pcibios: BIOS version 2.10 > Using $PIR table, 16 entries at 0xc00fde60 > pcib0: at pcibus 0 on motherboard > pci0: on pcib0 > agp0: mem 0xe000-0xe3ff at > device 0.0 on pci0 > pci0: at device 0.1 (no driver attached) > pci0: at device 0.2 (no driver attached) > pci0: at device 0.3 (no driver attached) > pci0: at device 0.4 (no driver attached) > pci0: at device 0.5 (no driver attached) > isab0: at device 1.0 on pci0 > isa0: on isab0 > pci0: at device 1.1 (no driver attached) > ohci0: mem 0xeb003000-0xeb003fff irq > 5 at device 2.0 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: on ohci0 > usb0: USB revision 1.0 > uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1: mem 0xeb004000-0xeb004fff irq > 11 at device 2.1 on pci0 > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: on ohci1 > usb1: USB revision 1.0 > uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 3 ports with 3 removable, self powered > pci0: at device 2.2 (no driver attached) > pci0: at device 4.0 (no driver attached) > pci0: at device 6.0 (no driver attached) > pcib1: at device 8.0 on pci0 > pci1: on pcib1 > pci_cfgintr: 1:7 INTA BIOS irq 5 > pci_cfgintr: 1:9 INTA BIOS irq 11 > pci_cfgintr: 1:10 INTA BIOS irq 11 > pci1: at device 7.0 (no driver attached) > rl0: port 0xc000-0xc0ff mem > 0xea01-0xea0100ff irq 11 at device 9.0 on pci1 > rl0: Ethernet address: 00:40:05:85:ee:cc > miibus0: on rl0 > rlphy0: on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ahc0: port 0xc400-0xc4ff mem > 0xea011000-0xea011fff irq 11 at device 10.0 on pci1 > ahc0: Host Adapter Bios disabled. Using default SCSI device parameters > aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs > atapci0: port 0xf000-0xf00f at > device 9.0 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > pcib2: at device 30.0 on pci0 > pci2: on pcib2 > pci_cfgintr: 0:30 INTA routed to irq 11 > pcib2: slot 0 INTA is routed to irq 11 > pci2: at device 0.0 (no driver attached) > orm0: at iomem > 0xd4000-0xd57ff,0xd-0xd3fff,0xc-0xcefff on isa0 > pmtimer0 on isa0 > atkbdc0: at port 0x64,0x60 on isa0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > fdc0: at port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 > unknown: can't assign resources (port) > unknown: can't assign resources (irq) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > unknown: can't assign resources (port) > Timecounter "TSC" frequency 1094147174 Hz quality 800 > Timecounters tick every 10.000 msec > GEOM: create disk ad0 dp=0xc48ef660 > ad0: 29311MB [59554/16/63] at ata0-master UDMA66 > acd0: CDROM at ata1-master PIO3 > Waiting 15 seconds for SCSI devices to settle > Mounting root from ufs:/dev/ad0s1a > ath0: mem 0xea00-0xea00 irq 5 at device 7.0 on pci1 > ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 > ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > ath0: 802.11 address: 00:0d:88:8b:d2:c7 > > >-Original Message- > > From: [EMAIL PROTECTED] > > >[mailto:[EMA
Re: Wireless PCI card setup
Did you set the gateway defaultrouter="192.168.39.1" in /etc/rc.conf so that the computer could find 192.168.38.1? Yes, that was set. Thanks, though. Andrew Gould --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Wireless PCI card setup
Here's how I set mine up: In /etc/rc.conf: ifconfig_wi0="DHCP" No luck. (Using ath0 as opposed to wi0, as is apparently necessary...) I next creat a file called /etc/start_if.wi0 with the line: ifconfig wi0 ssid somessid wepmode on wepkey 0xsomewepkey That's all I do. And it all works well. Lucky. ;p --- Is your wireless router setup to be DHCP on the cat5 end? It is. Chris Thanks for your thoughts. --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Wireless PCI card setup
Hi, Your kernel throws out a fair number of hiccups. Edit the Kernel Config file and add all the drivers you need. Also remove the multi processor stuff. You are missing quite some drivers as indicated in dmesg as Unknown-card. Dude, you're my hero! After messing up a few times, and about three kernel rebuilds (my own mess-ups), my connection is up and running at boot, and I can see past my own router. (Granted, I still have a fair number of those "hiccups," but I can deal with those at leisure, now. And learn more about how FreeBSD works in general.) My deepest thanks to you and everyone else on the list. Regards Subhro --G. Held -- End of line. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"