Re: CUPS w/ gimp-print *still *prints garbage on Stylus C82 afterreinstall on 5.1-RELEASE
On Mon, 2003-08-11 at 22:07, David Johnson wrote: > I don't see anything obvious in the error log either. What is the output > of "lpstat -v -l -p [printername]"? On my working C82, the relevant > lines are: > > device for stylus: usb:/dev/unlpt0 > Connection: direct > Interface: /usr/local/etc/cups/ppd/stylus.ppd Here's my lpstat output. I'd better check the CUPS manual and read up on how to manually specify a PPD file. device for inkjet0: usb:/dev/ulpt0 printer inkjet0 is idle. enabled since Jan 01 00:00 Form mounted: Content types: any Printer types: unknown Description: Epson Stylus C82 inkjet Location: christabel.starbreaker.net Connection: direct Interface: /usr/local/etc/cups/ppd/inkjet0.ppd On fault: no alert After fault: continue Users allowed: (all) Forms allowed: (none) Banner required Charset sets: (none) Default pitch: Default page size: Default port settings: > p.s. Reply to my address as well as well as the list. OK, I just didn't want to bomb you with that error dump *twice*. Thanks for helping me out. -- Matthew Graybosch http://www.starbreaker.net "If you take a stand on a dead empty hand, never let 'em see your cards." --Savatage ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CUPS w/ gimp-print *still *prints garbage on Stylus C82 afterreinstall on 5.1-RELEASE
On Monday 11 August 2003 04:59 pm, Matthew Graybosch wrote: > However, printing a test page still yields garbage. I'm going to > attach the output of tail /var/log/cups/error_log after my sig. I > can't see anything obviously wrong in the error log, but this is only > the second time I installed CUPS. The first time was under Libranet > and everything "just worked". I don't see anything obvious in the error log either. What is the output of "lpstat -v -l -p [printername]"? On my working C82, the relevant lines are: device for stylus: usb:/dev/unlpt0 Connection: direct Interface: /usr/local/etc/cups/ppd/stylus.ppd p.s. Reply to my address as well as well as the list. -- David Johnson ___ http://www.usermode.org ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CUPS w/ gimp-print *still *prints garbage on Stylus C82 afterreinstall on 5.1-RELEASE
While reading the howto at http://www.cups.org/cups-help.html#tell I got the following information when examining the ppd CUPS is trying to use for my printer. I don't see anything untoward, though... Output of head -n 25 /usr/local/etc/cups/ppd/inkjet0.ppd *PPD-Adobe: "4.3" *%PPD file for CUPS/Gimp-Print. *%Copyright 1993-2001 by Easy Software Products, All Rights Reserved. *%This PPD file may be freely used and distributed under the terms of *%the GNU GPL. *FormatVersion: "4.3" *FileVersion: "4.2.5" *LanguageVersion: English *LanguageEncoding: ISOLatin1 *PCFileName:"escp2-c82.ppd" *Manufacturer: "EPSON" *Product: "(Gimp-Print v4.2.5)" *ModelName: "escp2-c82" *ShortNickName: "EPSON Stylus C82" *NickName: "EPSON Stylus C82, CUPS+Gimp-Print v4.2.5" *PSVersion: "(2017.000) 705" *LanguageLevel: "2" *ColorDevice: True *DefaultColorSpace: RGB *FileSystem:False *LandscapeOrientation: Plus90 *TTRasterizer: Type42 *cupsVersion: 1.1 *cupsModelNumber: "55" *cupsManualCopies: True -- Matthew Graybosch http://www.starbreaker.net "If you take a stand on a dead empty hand, never let 'em see your cards." --Savatage ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CUPS w/ gimp-print *still *prints garbage on Stylus C82 afterreinstall on 5.1-RELEASE
On Mon, Aug 11, 2003 at 07:59:28PM -0400, Matthew Graybosch wrote: > On Mon, 2003-08-11 at 00:43, David Johnson wrote: > > > Did you delete the lp* binaries before or after you installed > > cups? If after, then reinstall cups. > > I reinstalled both cups and gimp-print, installing the following > ports: > > /usr/ports/print/cups > /usr/ports/print/cups-base > /usr/ports/print/cups-lpr > /usr/ports/print/cups-pstoraster > /usr/ports/print/gimp-print You do not say what versions of the software programs you are using. The subject line says FreeBSD-5.1 RELEASE, so I assume you are using the ports/packages from the CD. If that is the case, printing was broken with cups and gimp-print at that time due to an incompatibility between ghostscript and cups-pstoraster. The answer is to cvsup a fresh ports tree and install the latest versions of the ports. If you already have the latest versions installed then you have some other problem. -- Glenn Johnson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CUPS w/ gimp-print *still *prints garbage on Stylus C82 afterreinstall on 5.1-RELEASE
On Monday 11 August 2003 07:18 pm, Matthew Graybosch wrote: > On Mon, 2003-08-11 at 22:07, David Johnson wrote: > > I don't see anything obvious in the error log either. What is the > > output of "lpstat -v -l -p [printername]"? On my working C82, the > > relevant lines are: > > > > device for stylus: usb:/dev/unlpt0 > > Connection: direct > > Interface: /usr/local/etc/cups/ppd/stylus.ppd > > Here's my lpstat output. I'd better check the CUPS manual and read up > on how to manually specify a PPD file. > > device for inkjet0: usb:/dev/ulpt0 Your ppd file is the same as mine. The only notable differences I can see in the output of lpstat is that you're using /dev/ulpt0 and I'm using /dev/unlpt0. So I tried using /dev/ulpt0 as well. I'm still getting correct output. This is strange. Sorry I can't help you any more. p.s. One thing I did notice was that I had to restart CUPS before I could add another printer. -- David Johnson ___ http://www.usermode.org ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
