Re: NVidia GeForce 6600 problems
Alejandro Pulver wrote: On Thu, 02 Feb 2006 12:05:14 + Alex Zbyslaw <[EMAIL PROTECTED]> wrote: I have a 6600 with FreeBSD 5.4 XOrg 6.8.2 but still nvidia-driver-1.0.7676_1. I have an occasional problem where the whole screen is shifted left on startup, but exiting and restarting X fixes it. You could try downgrading to an older nvidia-driver and see if it helps. Portdowngrade should do that, but I've never used it myself. You may have more luck if you try the nvidia support forum. Definitely slower than this mailing list but someone from nvidia was reading it, last time I used it. http://www.nvnews.net/vbulletin/forumdisplay.php?f=47 Well, that was part of the problem, but I still have errors with one OpenGL application (I have tested others like Doom III and Enemy Territory and didn't cause this): a Quake II engine called QuDos. Sometimes I get the following: Program output (QuDos): Received signal 11, exiting... X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 135 (XFree86-VidModeExtension) Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) Value in failed request: 0x122 Serial number of failed request: 35768 Current serial number in output stream: 35771 NVidia kernel module output: NVRM: Xid: 8, Channel 0002 NVRM: Xid: 27, L1 -> L0 I don't play OpenGL games under FreeBSD so I can't tell if I have the same problems with my card/driver/Xorg version, sorry. But I think my original advice still holds. Try searching the NVidia forum for your new error and if nothing found try posting a question there. And you can *try* downgrading the driver, which may or may not help, but must be worth a shot. You could always run WinXP for games --Alex ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NVidia GeForce 6600 problems
On Wed, 15 Feb 2006 13:12:41 -0300 Alejandro Pulver <[EMAIL PROTECTED]> wrote: > On Thu, 2 Feb 2006 11:39:19 -0300 > Alejandro Pulver <[EMAIL PROTECTED]> wrote: > > > On Thu, 02 Feb 2006 12:05:14 + > > Alex Zbyslaw <[EMAIL PROTECTED]> wrote: > > > > > Alejandro Pulver wrote: > > > > > > >On Wed, 1 Feb 2006 15:06:21 -0300 > > > >Alejandro Pulver <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > >>Hello, > > > >> > > > >>I have recently bought a GeForce 6600 video card, and sometimes > > > >>(not very often) I experience the following problem: > > > >> > > > >>A little after starting X11 (for example when I start > > > >>downloading e-mails), the screen freezes a few seconds, after > > > >>that the screen looks like if widgets (buttons, text, etc.) > > > >>aren't drawn, and the white background of Sylpheed-Claws covers > > > >>the screen. Then I am forced to switch to the 1st console > > > >>(Ctrl+Alt+F1), which takes around 30 seconds, and then kill X11. > > > >> > > > >>I have FreeBSD 5.4 release, Xorg 6.8.2 and nvidia-driver > > > >>1.0.8178. > > > >> > > > >> > > > I have a 6600 with FreeBSD 5.4 XOrg 6.8.2 but still > > > nvidia-driver-1.0.7676_1. I have an occasional problem where the > > > whole screen is shifted left on startup, but exiting and > > > restarting X fixes it. You could try downgrading to an older > > > nvidia-driver and see if it helps. Portdowngrade should do that, > > > but I've never used it myself. > > > > > > You may have more luck if you try the nvidia support forum. > > > Definitely slower than this mailing list but someone from nvidia > > > was reading it, last time I used it. > > > > > > http://www.nvnews.net/vbulletin/forumdisplay.php?f=47 > > > > > > --Alex > > > > > > > Hello, > > > > Thank you for your reply. > > > > I have recently (started yesterday, and finishing yoday) upgraded my > > ports (including Xorg -> 6.9). If the problems persist I will try > > the old dirver and post information about the error in the NVidia > > forums. > > > > Best Regards, > > Ale > > Hello again, > > I have discovered the problem: the lock of the AGP slot wasn't on > (when I changed the video card I forgot the lock isn't automatic as > the one in the memory slots). > > I noticed this when the card was disconnected completely (it has a > cooler, so I guess the vibration did it). Once I rebooted and the > screen was black (the integrated video card was used instead of the > NVidia). Other time I saw the kernel message indicating the card was > detached and instantly detected again. > > Best Regards, > Ale Well, that was part of the problem, but I still have errors with one OpenGL application (I have tested others like Doom III and Enemy Territory and didn't cause this): a Quake II engine called QuDos. Sometimes I get the following: Program output (QuDos): Received signal 11, exiting... X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 135 (XFree86-VidModeExtension) Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) Value in failed request: 0x122 Serial number of failed request: 35768 Current serial number in output stream: 35771 NVidia kernel module output: NVRM: Xid: 8, Channel 0002 NVRM: Xid: 27, L1 -> L0 Best Regards, Ale ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NVidia GeForce 6600 problems
On Thu, 2 Feb 2006 11:39:19 -0300 Alejandro Pulver <[EMAIL PROTECTED]> wrote: > On Thu, 02 Feb 2006 12:05:14 + > Alex Zbyslaw <[EMAIL PROTECTED]> wrote: > > > Alejandro Pulver wrote: > > > > >On Wed, 1 Feb 2006 15:06:21 -0300 > > >Alejandro Pulver <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > >>Hello, > > >> > > >>I have recently bought a GeForce 6600 video card, and sometimes > > >>(not very often) I experience the following problem: > > >> > > >>A little after starting X11 (for example when I start downloading > > >>e-mails), the screen freezes a few seconds, after that the screen > > >>looks like if widgets (buttons, text, etc.) aren't drawn, and the > > >>white background of Sylpheed-Claws covers the screen. Then I am > > >>forced to switch to the 1st console (Ctrl+Alt+F1), which takes > > >>around 30 seconds, and then kill X11. > > >> > > >>I have FreeBSD 5.4 release, Xorg 6.8.2 and nvidia-driver 1.0.8178. > > >> > > >> > > I have a 6600 with FreeBSD 5.4 XOrg 6.8.2 but still > > nvidia-driver-1.0.7676_1. I have an occasional problem where the > > whole screen is shifted left on startup, but exiting and restarting > > X fixes it. You could try downgrading to an older nvidia-driver and > > see if it helps. Portdowngrade should do that, but I've never used > > it myself. > > > > You may have more luck if you try the nvidia support forum. > > Definitely slower than this mailing list but someone from nvidia was > > reading it, last time I used it. > > > > http://www.nvnews.net/vbulletin/forumdisplay.php?f=47 > > > > --Alex > > > > Hello, > > Thank you for your reply. > > I have recently (started yesterday, and finishing yoday) upgraded my > ports (including Xorg -> 6.9). If the problems persist I will try the > old dirver and post information about the error in the NVidia forums. > > Best Regards, > Ale Hello again, I have discovered the problem: the lock of the AGP slot wasn't on (when I changed the video card I forgot the lock isn't automatic as the one in the memory slots). I noticed this when the card was disconnected completely (it has a cooler, so I guess the vibration did it). Once I rebooted and the screen was black (the integrated video card was used instead of the NVidia). Other time I saw the kernel message indicating the card was detached and instantly detected again. Best Regards, Ale ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NVidia GeForce 6600 problems
On Thu, 02 Feb 2006 12:05:14 + Alex Zbyslaw <[EMAIL PROTECTED]> wrote: > Alejandro Pulver wrote: > > >On Wed, 1 Feb 2006 15:06:21 -0300 > >Alejandro Pulver <[EMAIL PROTECTED]> wrote: > > > > > > > >>Hello, > >> > >>I have recently bought a GeForce 6600 video card, and sometimes (not > >>very often) I experience the following problem: > >> > >>A little after starting X11 (for example when I start downloading > >>e-mails), the screen freezes a few seconds, after that the screen > >>looks like if widgets (buttons, text, etc.) aren't drawn, and the > >>white background of Sylpheed-Claws covers the screen. Then I am > >>forced to switch to the 1st console (Ctrl+Alt+F1), which takes > >>around 30 seconds, and then kill X11. > >> > >>I have FreeBSD 5.4 release, Xorg 6.8.2 and nvidia-driver 1.0.8178. > >> > >> > I have a 6600 with FreeBSD 5.4 XOrg 6.8.2 but still > nvidia-driver-1.0.7676_1. I have an occasional problem where the > whole screen is shifted left on startup, but exiting and restarting X > fixes it. You could try downgrading to an older nvidia-driver and > see if it helps. Portdowngrade should do that, but I've never used > it myself. > > You may have more luck if you try the nvidia support forum. > Definitely slower than this mailing list but someone from nvidia was > reading it, last time I used it. > > http://www.nvnews.net/vbulletin/forumdisplay.php?f=47 > > --Alex > Hello, Thank you for your reply. I have recently (started yesterday, and finishing yoday) upgraded my ports (including Xorg -> 6.9). If the problems persist I will try the old dirver and post information about the error in the NVidia forums. Best Regards, Ale ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NVidia GeForce 6600 problems
Alejandro Pulver wrote: On Wed, 1 Feb 2006 15:06:21 -0300 Alejandro Pulver <[EMAIL PROTECTED]> wrote: Hello, I have recently bought a GeForce 6600 video card, and sometimes (not very often) I experience the following problem: A little after starting X11 (for example when I start downloading e-mails), the screen freezes a few seconds, after that the screen looks like if widgets (buttons, text, etc.) aren't drawn, and the white background of Sylpheed-Claws covers the screen. Then I am forced to switch to the 1st console (Ctrl+Alt+F1), which takes around 30 seconds, and then kill X11. I have FreeBSD 5.4 release, Xorg 6.8.2 and nvidia-driver 1.0.8178. I have a 6600 with FreeBSD 5.4 XOrg 6.8.2 but still nvidia-driver-1.0.7676_1. I have an occasional problem where the whole screen is shifted left on startup, but exiting and restarting X fixes it. You could try downgrading to an older nvidia-driver and see if it helps. Portdowngrade should do that, but I've never used it myself. You may have more luck if you try the nvidia support forum. Definitely slower than this mailing list but someone from nvidia was reading it, last time I used it. http://www.nvnews.net/vbulletin/forumdisplay.php?f=47 --Alex ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NVidia GeForce 6600 problems
On Wed, 1 Feb 2006 15:06:21 -0300 Alejandro Pulver <[EMAIL PROTECTED]> wrote: > Hello, > > I have recently bought a GeForce 6600 video card, and sometimes (not > very often) I experience the following problem: > > A little after starting X11 (for example when I start downloading > e-mails), the screen freezes a few seconds, after that the screen > looks like if widgets (buttons, text, etc.) aren't drawn, and the > white background of Sylpheed-Claws covers the screen. Then I am > forced to switch to the 1st console (Ctrl+Alt+F1), which takes around > 30 seconds, and then kill X11. > > I have FreeBSD 5.4 release, Xorg 6.8.2 and nvidia-driver 1.0.8178. > > I know this problem is with the driver, because I got this kernel > message: > > NVRM: Xid: 8, Channel > NVRM: Xid: 8, Channel 0020 > > And the Xorg log has the following: > > (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xe74c, 0xe75c, 0) > (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xe74c, 0xe75c, 0) > Failed to switch consoles (Invalid argument) > (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xe74c, 0xe834, 0) > (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xe74c, 0xe834, 0) > (WW) NVIDIA(0): WAIT (2, 4, 0x8000, 0xe74c, 0xe844, 0) > (WW) NVIDIA(0): WAIT (1, 4, 0x8000, 0xe74c, 0xe844, 0) > (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xe74c, 0xe878, 0) > (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xe74c, 0xe878, 0) > (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xe74c, 0xe89c, 0) > (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xe74c, 0xe89c, 0) > (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0xe74c, 0xe8ac, 0) > (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0xe74c, 0xe8ac, 0) > FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, > should be 1; fixing. > > If more information is needed just ask (and please tell me how to > obtain it). > > What can I do? Should I update FreeBSD/Xorg? > > Thanks and Best Regards, > Ale I forgot to post the kernel module output when detecting the device: nvidia0: mem 0xcd00-0xcdff,0xb000-0xbfff,0xce00-0xceff irq 16 at device 0.0 on pci1 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"