Re: lan bandwidth issue
I think we have the same issue Working on this problem for months now and I can't find the problem. I also used the FreeBSD as a NATd server for my ADSL(tun0) connection. I have some other server demons running, but switching them off gives no positive effect on the upload speed (average it's 10 times slower than down). When I disconnect the Internet the problem isn't solved, so it's not a lookup loop. Problem is not solved by setting all NIC's to 10 or half duplex. This problem accurse with NFS, Samba and FTP so it's not a configuration of these demons. Please replace the Reltek card, because a realtek chip-set based NIC will over preform on a FreeBSD box, courses connection losses and wrong media detections. However I have exactly the same problem using a 3Com for my LAN connection: # ifconfig xl0 xl0: flags=8843 mtu 1500 options=3 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 ether 00:04:75:98:d6:bd media: Ethernet 100baseTX status: active Have tested my HDD speed but this is good (12MB/Sec read and 9MB/Sec write, random). This is generated with tcpdump during a heavy upload (500MB), I don't have a clue what it means but maybe somebody can have a look at this. # tcpdump xl0 10:38:10.760321 server.zaleo.homeunix.net.netbios-ssn > zeo.1029: . ack 3156635 win 65535 (DF) 10:38:10.760751 zeo.1029 > server.zaleo.homeunix.net.netbios-ssn: . 3158095:3159555(1460) ack 6883 win 63781NBT Packet (DF) More information about the system is found on Http://info.zaleo.homeunix.net (PhpSysInfo) As you can see a lot of "err" on this device only when I upload to the FreeBSD-Box, strangely there are no collisions on the network and I have also tried a direct twisted pair connection. If you need more specific information please let me know, we are really desperate to solve this performance problem. At 21:13 4-11-2003, silent slim wrote: This has gotta be a software issue... it seems logically impossible for it to be otherwise. I have my windows box running off a nat on my fbsd box, it transmits to my isp at a max of about 160k down 70k up. Transfering files between the two boxes can be done at a max of 1.6M down and 130k up. Hense its physcially impossible for it to be a hardware problem. This is all quite annoying as both boxes are connected by http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is causing this issue and how it could possibly be resolved? Here is the output from ifconfig on the bsd box: rl0: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 ether 00:50:fc:71:a1:1b media: Ethernet 100baseTX status: active rl1: flags=8843 mtu 1500 inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 inet 142.59.160.131 netmask 0xf800 broadcast 142.59.167.255 ether 00:50:bf:17:63:a2 media: Ethernet autoselect (10baseT/UTP) status: active lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 faith0: flags=8002 mtu 1500 And here is the output from ipconfig /all on the the win box: Windows IP Configuration Host Name . . . . . . . . . . . . : FAMILY Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 209.115.131.51 209.115.152.150 216.123.198.243 209.115.152.130 Thanks, ryan _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Zeo Smeijsters http://www.zaleo.homeunix.net/ http://www.zaleo.nl.
Re: lan bandwidth issue
I think we have the same issue Working on this problem for months now and I can't find the problem. I also used the FreeBSD as a NATd server for my ADSL(tun0) connection. I have some other server demons running, but switching them off gives no positive effect on the upload speed (average it's 10 times slower than upload). When I disconnect the Internet the problem isn't solved, so it's not a lookup loop. Problem is not solved by setting all NIC's to 10 of half duplex. This problem accurse with NFS, Samba and FTP so it's not a configuration of these demons. Please replace the Reltek card, because a realtek chip-set based NIC will over preform on a FreeBSD box, courses connection losses and wrong auto media detections. However I have exactly the same problem using a 3Com for my LAN connection: # ifconfig xl0 xl0: flags=8843 mtu 1500 options=3 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 ether 00:04:75:98:d6:bd media: Ethernet 100baseTX status: active Have tested my HDD speed but this is good (12MB/Sec read and 9MB/Sec write, random). This is genarated with tcpdump during a heavy upload (500MB), I don't have a clue what it means but maybe somebody can have a look at this. # tcpdump xl0 10:38:10.760321 server.zaleo.homeunix.net.netbios-ssn > zeo.1029: . ack 3156635 win 65535 (DF) 10:38:10.760751 zeo.1029 > server.zaleo.homeunix.net.netbios-ssn: . 3158095:3159555(1460) ack 6883 win 63781NBT Packet (DF) More information about my system is found on Http://info.zaleo.homeunix.net (PhpSysInfo) As you can see a lot of "err" on this device only when I upload to the FreeBSD-Box, strangely there are no collisions on the network and I have tried a direct twisted pair connection. If you need more specific information please let me know, we are really desperate to solve this problem. At 21:13 4-11-2003, silent slim wrote: This has gotta be a software issue... it seems logically impossible for it to be otherwise. I have my windows box running off a nat on my fbsd box, it transmits to my isp at a max of about 160k down 70k up. Transfering files between the two boxes can be done at a max of 1.6M down and 130k up. Hense its physcially impossible for it to be a hardware problem. This is all quite annoying as both boxes are connected by http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is causing this issue and how it could possibly be resolved? Here is the output from ifconfig on the bsd box: rl0: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 ether 00:50:fc:71:a1:1b media: Ethernet 100baseTX status: active rl1: flags=8843 mtu 1500 inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 inet 142.59.160.131 netmask 0xf800 broadcast 142.59.167.255 ether 00:50:bf:17:63:a2 media: Ethernet autoselect (10baseT/UTP) status: active lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 faith0: flags=8002 mtu 1500 And here is the output from ipconfig /all on the the win box: Windows IP Configuration Host Name . . . . . . . . . . . . : FAMILY Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 209.115.131.51 209.115.152.150 216.123.198.243 209.115.152.130 Thanks, ryan _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Zeo Smeijsters http://www.zaleo.homeunix.net/ http://www.zaleo.nl. ___
Re: lan bandwidth issue
Sorry, I can't resist this either. I work for VOL DSL tech support and have seen many many problems with the Realtek 8139 EVEN with Windoze. So, you'd better believe that if even Windoze has issues with this card then BSD will too. --charlie _ Concerned that messages may bounce because your Hotmail account is over limit? Get Hotmail Extra Storage! http://join.msn.com/?PAGE=features/es ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
On Nov 6, 2003, at 10:26 AM, Jack L. Stone wrote: This "price advice" then implies that if Realtek simply raised their prices, the card would be just fine...?? No. The price advice implies that a NIC that is worth $5 is probably not as good as a NIC which is worth $50. If Realtek raised their prices, their cards would become overpriced "cheapo" NICs rather than cheap "cheapo" NICs. :-) One should not just go by "expensive", but do some research not just based on that "easy" benchmark. The "cheapo" measurement is very misleading considering some cards may just be "on sale" and are fine cards. ...or just because they use the rlx driver Speaking of which, /usr/src/sys/pci/rl.c provides some very specific technical details as to the design flaws with this chipset family: /* * The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is * probably the worst PCI ethernet controller ever made, with the possible * exception of the FEAST chip made by SMC. The 8139 supports bus-master * DMA, but it has a terrible interface that nullifies any performance * gains that bus-master DMA usually offers. * * For transmission, the chip offers a series of four TX descriptor * registers. Each transmit frame must be in a contiguous buffer, aligned * on a longword (32-bit) boundary. This means we almost always have to * do mbuf copies in order to transmit a frame, except in the unlikely * case where a) the packet fits into a single mbuf, and b) the packet * is 32-bit aligned within the mbuf's data area. The presence of only * four descriptor registers means that we can never have more than four * packets queued for transmission at any one time. * * Reception is not much better. The driver has to allocate a single large * buffer area (up to 64K in size) into which the chip will DMA received * frames. Because we don't know where within this region received packets * will begin or end, we have no choice but to copy data from the buffer * area into mbufs in order to pass the packets up to the higher protocol * levels. * * It's impossible given this rotten design to really achieve decent * performance at 100Mbps, unless you happen to have a 400Mhz PII or * some equally overmuscled CPU to drive it. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
At 01:17 PM 11.6.2003 +, Chris Howells wrote: >-BEGIN PGP SIGNED MESSAGE- >Hash: SHA1 > >Hi, > >On Wednesday 05 November 2003 11:25, silent slim wrote: >> i'd like the network to go at 100Mbps since both cards could be able too >> and the current speeds are laughable. > >The RealTek 8139 (rl0 and rl1) are pretty shitty network cards, the cheapest >available (I can buy them for GBP £2, about USD $3). I only use them to >connect my ADSL modem to my firewall because they're so cheap and performance >is not an issue there. > >You'll almost certainly get much better performance with some more expensive >3Com or Intel cards. > >That may not be the only bottleneck of course. > >- -- >Cheers, Chris Howells -- [EMAIL PROTECTED], [EMAIL PROTECTED] I've seen this before several thimes and I just can't pass it up this time. Nothing personal meant, though, so no flames please. This "price advice" then implies that if Realtek simply raised their prices, the card would be just fine...?? One should not just go by "expensive", but do some research not just based on that "easy" benchmark. The "cheapo" measurement is very misleading considering some cards may just be "on sale" and are fine cards. ...or just because they use the rlx driver Best regards, Jack L. Stone, Administrator Sage American http://www.sage-american.com [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, On Wednesday 05 November 2003 11:25, silent slim wrote: > i'd like the network to go at 100Mbps since both cards could be able too > and the current speeds are laughable. The RealTek 8139 (rl0 and rl1) are pretty shitty network cards, the cheapest available (I can buy them for GBP £2, about USD $3). I only use them to connect my ADSL modem to my firewall because they're so cheap and performance is not an issue there. You'll almost certainly get much better performance with some more expensive 3Com or Intel cards. That may not be the only bottleneck of course. - -- Cheers, Chris Howells -- [EMAIL PROTECTED], [EMAIL PROTECTED] Web: http://chrishowells.co.uk, PGP ID: 0x33795A2C KDE/Qt/C++/PHP Developer: http://www.kde.org -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE/qkoAF8Iu1zN5WiwRAj7JAJ9iryu0G99JYmyL8GXxICoF9ctjxwCfZWCy Ha6s3pG71jZMB+UyclFTmA8= =+QIe -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
r10 looks good, but r11 looks real bad. If it is a driver issue see if there are some settings you can tweak in the driver, or update it, or make sure it is using the right one. You could try a line like "ifconfig_r11 media 100baseTX mediaopt full-duplex" in the rc.conf file. I don't know if this will work, I got it from http://www.geocrawler.com/archives/3/154/2002/4/0/8532322/ which says put it in rc.network? I don't see rc.network on my machince. By the way most network products rate speed in bits/sec, not bytes/sec which I see a lot of apps use to rate connection or dl speed. So it look like r11 is at 10mbits/sec = 1.25mbytes/sec. Like Alex said samba is slow, so try another protocal. To test it try installing some network testing software from ports to test your network speed, or check pcpitstop.com for an internet speed test. You can check the man pages like $man rc.conf, or check the default configs on your hard drive. Finnally I would like to say that the mtu value can have a big impact on speed. On win98 the default is really small for dailup, or something like that, so something I do to get a good speed boost is up the size of the mtu. Check http://cable-dsl.home.att.net/ for details. Jason silent slim wrote: This has gotta be a software issue... it seems logically impossible for it to be otherwise. I have my windows box running off a nat on my fbsd box, it transmits to my isp at a max of about 160k down 70k up. Transfering files between the two boxes can be done at a max of 1.6M down and 130k up. Hense its physcially impossible for it to be a hardware problem. This is all quite annoying as both boxes are connected by http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is causing this issue and how it could possibly be resolved? Here is the output from ifconfig on the bsd box: rl0: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 ether 00:50:fc:71:a1:1b media: Ethernet 100baseTX status: active rl1: flags=8843 mtu 1500 inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 inet 142.59.160.131 netmask 0xf800 broadcast 142.59.167.255 ether 00:50:bf:17:63:a2 media: Ethernet autoselect (10baseT/UTP) status: active lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 faith0: flags=8002 mtu 1500 And here is the output from ipconfig /all on the the win box: Windows IP Configuration Host Name . . . . . . . . . . . . : FAMILY Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 209.115.131.51 209.115.152.150 216.123.198.243 209.115.152.130 Thanks, ryan _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
On Thu, 06 Nov 2003 01:15:00 +0100 Alex de Kruijff <[EMAIL PROTECTED]> granted us these pearls of wisdom: > On Wed, Nov 05, 2003 at 04:25:12AM -0700, silent slim wrote: > > >From: Alex de Kruijff <[EMAIL PROTECTED]> > > >To: silent slim <[EMAIL PROTECTED]> > > >CC: [EMAIL PROTECTED] > > >Subject: Re: lan bandwidth issue > > >Date: Wed, 05 Nov 2003 02:52:47 +0100 > > > > > >On Tue, Nov 04, 2003 at 01:13:34PM -0700, silent slim wrote: > > >> This has gotta be a software issue... it seems logically impossible for > > >> it to be otherwise. I have my windows box running off a nat on my fbsd > > >> box, it transmits to my isp at a max of about 160k down 70k up. > > >> Transfering files between the two boxes can be done at a max of 1.6M > > >down > > >> and 130k up. Hense its physcially impossible for it to be a hardware > > >> problem. This is all quite annoying as both boxes are connected by > > >> > > >http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm > > >> 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is > > >> causing this issue and how it could possibly be resolved? > > >> > > > > > >Right now I don't have much to go on. What problem do you have? > > > > i'd like the network to go at 100Mbps since both cards could be able too > > and the current speeds are laughable. > > Most network cards still realy heavly on you computer CPU. There for you > souldn't expert 10MBps out of it. > > Secondly, how do you transfer your data? If you use Samba then you > should also expect a loss in speed, and you might consider switching to > ftp. > > > -- > Alex > It is also worth remembering that very few hdd can actually write data at 100Mbps. Older motherboards often have ultra33 disk controllers etc etc. how many processes are writing to and reading from the same disk (s) ? One lesson I learnt was that you cannot underestimate the value of a good NIC. I don't want to start any religious wars but I had used realtek based NICs for the longest time and when I changed to 3Com I noticed a full 2Mbps increase in speed on the same hardware. Having said all of that when copying a large file - say 700mb I can copy from windows to FBSD (both using 3Com) via a samba share and it takes about 6mins per file, the same file between FBSD and FBSD via another FBSD router takes only 2 2.5 mins over rsync so as Alex mentioned perhaps the way you are transferring files has something to do with it. HTH LukeK ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
On Wed, Nov 05, 2003 at 04:25:12AM -0700, silent slim wrote: > >From: Alex de Kruijff <[EMAIL PROTECTED]> > >To: silent slim <[EMAIL PROTECTED]> > >CC: [EMAIL PROTECTED] > >Subject: Re: lan bandwidth issue > >Date: Wed, 05 Nov 2003 02:52:47 +0100 > > > >On Tue, Nov 04, 2003 at 01:13:34PM -0700, silent slim wrote: > >> This has gotta be a software issue... it seems logically impossible for > >> it to be otherwise. I have my windows box running off a nat on my fbsd > >> box, it transmits to my isp at a max of about 160k down 70k up. > >> Transfering files between the two boxes can be done at a max of 1.6M > >down > >> and 130k up. Hense its physcially impossible for it to be a hardware > >> problem. This is all quite annoying as both boxes are connected by > >> > >http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm > >> 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is > >> causing this issue and how it could possibly be resolved? > >> > > > >Right now I don't have much to go on. What problem do you have? > > i'd like the network to go at 100Mbps since both cards could be able too > and the current speeds are laughable. Most network cards still realy heavly on you computer CPU. There for you souldn't expert 10MBps out of it. Secondly, how do you transfer your data? If you use Samba then you should also expect a loss in speed, and you might consider switching to ftp. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
On Wed, 2003-11-05 at 22:25, silent slim wrote: > > >From: Alex de Kruijff <[EMAIL PROTECTED]> > >To: silent slim <[EMAIL PROTECTED]> > >CC: [EMAIL PROTECTED] > >Subject: Re: lan bandwidth issue > >Date: Wed, 05 Nov 2003 02:52:47 +0100 > > > >On Tue, Nov 04, 2003 at 01:13:34PM -0700, silent slim wrote: > > > This has gotta be a software issue... it seems logically impossible for > > > it to be otherwise. I have my windows box running off a nat on my fbsd > > > box, it transmits to my isp at a max of about 160k down 70k up. > > > Transfering files between the two boxes can be done at a max of 1.6M > >down > > > and 130k up. Hense its physcially impossible for it to be a hardware > > > problem. This is all quite annoying as both boxes are connected by > > > > >http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm > > > 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is > > > causing this issue and how it could possibly be resolved? > > > > > > >Right now I don't have much to go on. What problem do you have? > > > >-- > >Alex > > > >Articles based on solutions that I use: > >http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ > > > i'd like the network to go at 100Mbps since both cards could be able too and > the current speeds are laughable. Check the crossover does not have the wires out of phase. You can sometimes get away with it at 10mb but not at 100mb. Try another cable or locking the cards down to 10mb to see if that helps. If it works at 10mb replug your cable. Regards Gary. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
From: Alex de Kruijff <[EMAIL PROTECTED]> To: silent slim <[EMAIL PROTECTED]> CC: [EMAIL PROTECTED] Subject: Re: lan bandwidth issue Date: Wed, 05 Nov 2003 02:52:47 +0100 On Tue, Nov 04, 2003 at 01:13:34PM -0700, silent slim wrote: > This has gotta be a software issue... it seems logically impossible for > it to be otherwise. I have my windows box running off a nat on my fbsd > box, it transmits to my isp at a max of about 160k down 70k up. > Transfering files between the two boxes can be done at a max of 1.6M down > and 130k up. Hense its physcially impossible for it to be a hardware > problem. This is all quite annoying as both boxes are connected by > http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm > 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is > causing this issue and how it could possibly be resolved? > Right now I don't have much to go on. What problem do you have? -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ i'd like the network to go at 100Mbps since both cards could be able too and the current speeds are laughable. _ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/photos&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lan bandwidth issue
On Tue, Nov 04, 2003 at 01:13:34PM -0700, silent slim wrote: > This has gotta be a software issue... it seems logically impossible for > it to be otherwise. I have my windows box running off a nat on my fbsd > box, it transmits to my isp at a max of about 160k down 70k up. > Transfering files between the two boxes can be done at a max of 1.6M down > and 130k up. Hense its physcially impossible for it to be a hardware > problem. This is all quite annoying as both boxes are connected by > http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm > 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is > causing this issue and how it could possibly be resolved? > Right now I don't have much to go on. What problem do you have? -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
lan bandwidth issue
This has gotta be a software issue... it seems logically impossible for it to be otherwise. I have my windows box running off a nat on my fbsd box, it transmits to my isp at a max of about 160k down 70k up. Transfering files between the two boxes can be done at a max of 1.6M down and 130k up. Hense its physcially impossible for it to be a hardware problem. This is all quite annoying as both boxes are connected by http://www.startech.com/ststore/itemdetail.cfm?tab=b&ProductID=ST100S&topbar=topbara.htm 10/100 nics and a 50' crossover cable. Anyone have any ideas on what is causing this issue and how it could possibly be resolved? Here is the output from ifconfig on the bsd box: rl0: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xff00 broadcast 192.168.0.255 inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 ether 00:50:fc:71:a1:1b media: Ethernet 100baseTX status: active rl1: flags=8843 mtu 1500 inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 inet 142.59.160.131 netmask 0xf800 broadcast 142.59.167.255 ether 00:50:bf:17:63:a2 media: Ethernet autoselect (10baseT/UTP) status: active lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff00 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 faith0: flags=8002 mtu 1500 And here is the output from ipconfig /all on the the win box: Windows IP Configuration Host Name . . . . . . . . . . . . : FAMILY Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet NIC Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 209.115.131.51 209.115.152.150 216.123.198.243 209.115.152.130 Thanks, ryan _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"