Re: HOW TO: Enabling root on a new server?
Alright all, First and foremost, you ladies and gents have been *amazingly* responsive and helpful; for that I thank you. We've gotten the "root" issue resolved. I fiiinally spoke to someone that was familiar enough to log a request for good ole "single user mode" to simply blast the root password. I had root access within 15 minutes. It turns out that even the root password they had on hand was wrong so they were forced to resolve the issue. I am now all-powerful. . .well on that server anyway. ;) I will likely be keeping Plesk around in the short term in order to allow "lower" admins to easily set up a few clients, but its days are numbered. Thanks again for all your input/help. Best Regards, Michael On Jul 17, 2007, at 5:54 AM, Julian H. Stacey wrote: Norberto Meijome wrote: Michael Williams <[EMAIL PROTECTED]> wrote: I'm going to call one more time today. If I get no better assistance, I will seek out a different company. If you all have any recommendations let me know. http://bsn.com : Small v. flexible BSD ISP server hosting & provision. Sparcs available too. http://consol.de Bigger. Both host http:// berklix.org servers. Search the archives for discussions on FreeBSD Hosting. http://www.freebsd.org/commercial/isp.html -- Julian Stacey. Munich Computer Consultant, BSD Unix C Linux. http:// berklix.com Ihr Rauch=mein allergischer Kopfschmerz. Dump cigs 4 snuff. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
Norberto Meijome wrote: > Michael Williams <[EMAIL PROTECTED]> wrote: > > > I'm going to call one more time today. If I get no better > > assistance, I will seek out a different company. If you all have any > > recommendations let me know. http://bsn.com : Small v. flexible BSD ISP server hosting & provision. Sparcs available too. http://consol.de Bigger. Both host http://berklix.org servers. > Search the archives for discussions on FreeBSD Hosting. http://www.freebsd.org/commercial/isp.html -- Julian Stacey. Munich Computer Consultant, BSD Unix C Linux. http://berklix.com Ihr Rauch=mein allergischer Kopfschmerz. Dump cigs 4 snuff. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
On Mon, 16 Jul 2007 11:25:28 -0400 Michael Williams <[EMAIL PROTECTED]> wrote: > I'm going to call one more time today. If I get no better > assistance, I will seek out a different company. If you all have any > recommendations let me know. we still have some (linux) servers with ThePlanet, not the best place (quite big,lots of waiting in queue for scripted service) but ok for the job at hand. For the last 6 mths or os i've been very happy with Layered Technology - vere reliable and know their stuff. If you can afford it, Rackspace are really good, though i dont know if they still offer FBSD Search the archives for discussions on FreeBSD Hosting. _ {Beto|Norberto|Numard} Meijome "Liberty is not a means to a higher political end. It is itself the highest political end... liberty is the only object which benefits all alike, and provokes no sincere opposition... The danger is not that a particular class is unfit to to govern. Every class is unfit to govern... Power tends to corrupt, and absolute power corrupts absolutely." Lord Acton I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
Amusing to hear they are more secure on FreeBSD than linux although its a shame that didnt work for you. They didnt enable you to use sudo instead of su or something like that did they? I'm afraid i cant recommend any FreeBSD hosting companies though personal experience, (work only does linux and windows,) but i'm sure an ask on or a search of the archives of the freebsd-questions@ , freebsd-net@ or freebsd-isp@ lists will throw up some suggestions. Vince Michael Williams wrote: > First, the output of the grep is: > > root:*:0:0:Charlie &:/root:/bin/csh > toor:*:0:0:Bourne-again Superuser:/root: > daemon:*:1:1:Owner of many system processes:/root:/usr/sbin/nologin > > > . . .that said, the Plesk Module Loader only allows for ".tgz" and > ".tbz" files and is anal about them being of a "module" format, whatever > structure may be. I've tried what I thought were appropriate modules, > and it rejected them saying they were not true modules. > > I'm going to call one more time today. If I get no better assistance, I > will seek out a different company. If you all have any recommendations > let me know. Obviously, the best solution would be to have my ISP set > me up with a static IP and massive amounts of bandwidth. But, seeing as > how that's at least a good 30 years off. . . > > Regards, > Michael > > > On Jul 16, 2007, at 11:03 AM, Vince wrote: > >> For most versions of plesk i've come across (I look after a load of >> linux servers with it installed,) if you have the plesk admin then you >> have root. Look for the modules option, then look for the add modules, >> this should let you upload a shell script which is then run as root >> (horribly insecure but thats plesk, and if you fiddle with their setting >> enough you can change the css of the webapp not to display the page) If >> this is the same on FreeBSD as on linux you can create a new UID 0 user >> if need be using pw in a shell script, or you can put a ssh public key >> in to roots authorized_keys file. I'd definitely advise you get plesk >> removed if you intend to administrate the box by hand though. >> >> If thats no help, when you log into the box by ssh, what is the >> output of >> grep root /etc/passwd >> it should be something like >> root:*:0:0:Charlie &:/root:/bin/csh >> if not then they have renamed/removed root so try looking in /etc/passwd >> for a user with uid of 0 (third field.) >> This should at least get you a username to ask their support about. If >> they have actually removed the root user your a bit stuffed and >> >> Hope some of thats some help. >> >> Vince >> >> >> >> Michael Williams wrote: >>> Tom, >>> >>> Again, Plesk just came with the server config we asked for. We didn't >>> ask for Plesk, we *asked* for the specific hardware. Plesk was "free". >>> *rolls eyes* >>> >>> Regards, >>> Michael >>> >>> On Jul 16, 2007, at 3:17 AM, Tom Samplonius wrote: >>> - "Michael Williams" <[EMAIL PROTECTED]> wrote: > No, I don't necessarily need Plesk; although we will be selling > hosting. It simply came with the default configuration for the > server. My plan is to manage most everything from the Unix shell. I > > just figured I might find a morsel inside Plesk somewhere for > enabling root access. FYI, logging in as admin didn't work. Any > other suggestions? You are probably better off just asking the hosting company for the password. You need the root password, and you need to have an account that is a member of the wheel group (use "groups" when you ssh to see if your account is ok). They might have flagged you as a newbie, and think you are better off inside the padded confines of Plesk. I work at a hosting company, and a whole bunch of our dedicated server customers are in over their heads with their servers as it is. Given that you asked for Plesk, and are now asking for root, they are probably has made them worried that the next call from you will be that you deleted /etc, and your server won't boot anymore. If you are planning to do any admin via ssh with root, you will not want Plesk. Plesk manages all of your software installs. Plesk includes Plesk specific versions of Apache, PHP, and MySQL. All patches and updates can only come from SWSoft, or the Plesk universe will crash. And Plesk ties you to a specific FreeBSD version too. Plesk versions lag big time for FreeBSD. But on the other hand, it is big GUI thing, and people like it. Tom >>> >>> ___ >>> freebsd-stable@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>> To unsubscribe, send any mail to >>> "[EMAIL PROTECTED]" >> ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe,
Re: HOW TO: Enabling root on a new server?
First, the output of the grep is: root:*:0:0:Charlie &:/root:/bin/csh toor:*:0:0:Bourne-again Superuser:/root: daemon:*:1:1:Owner of many system processes:/root:/usr/sbin/nologin . . .that said, the Plesk Module Loader only allows for ".tgz" and ".tbz" files and is anal about them being of a "module" format, whatever structure may be. I've tried what I thought were appropriate modules, and it rejected them saying they were not true modules. I'm going to call one more time today. If I get no better assistance, I will seek out a different company. If you all have any recommendations let me know. Obviously, the best solution would be to have my ISP set me up with a static IP and massive amounts of bandwidth. But, seeing as how that's at least a good 30 years off. . . Regards, Michael On Jul 16, 2007, at 11:03 AM, Vince wrote: For most versions of plesk i've come across (I look after a load of linux servers with it installed,) if you have the plesk admin then you have root. Look for the modules option, then look for the add modules, this should let you upload a shell script which is then run as root (horribly insecure but thats plesk, and if you fiddle with their setting enough you can change the css of the webapp not to display the page) If this is the same on FreeBSD as on linux you can create a new UID 0 user if need be using pw in a shell script, or you can put a ssh public key in to roots authorized_keys file. I'd definitely advise you get plesk removed if you intend to administrate the box by hand though. If thats no help, when you log into the box by ssh, what is the output of grep root /etc/passwd it should be something like root:*:0:0:Charlie &:/root:/bin/csh if not then they have renamed/removed root so try looking in /etc/ passwd for a user with uid of 0 (third field.) This should at least get you a username to ask their support about. If they have actually removed the root user your a bit stuffed and Hope some of thats some help. Vince Michael Williams wrote: Tom, Again, Plesk just came with the server config we asked for. We didn't ask for Plesk, we *asked* for the specific hardware. Plesk was "free". *rolls eyes* Regards, Michael On Jul 16, 2007, at 3:17 AM, Tom Samplonius wrote: - "Michael Williams" <[EMAIL PROTECTED]> wrote: No, I don't necessarily need Plesk; although we will be selling hosting. It simply came with the default configuration for the server. My plan is to manage most everything from the Unix shell. I just figured I might find a morsel inside Plesk somewhere for enabling root access. FYI, logging in as admin didn't work. Any other suggestions? You are probably better off just asking the hosting company for the password. You need the root password, and you need to have an account that is a member of the wheel group (use "groups" when you ssh to see if your account is ok). They might have flagged you as a newbie, and think you are better off inside the padded confines of Plesk. I work at a hosting company, and a whole bunch of our dedicated server customers are in over their heads with their servers as it is. Given that you asked for Plesk, and are now asking for root, they are probably has made them worried that the next call from you will be that you deleted /etc, and your server won't boot anymore. If you are planning to do any admin via ssh with root, you will not want Plesk. Plesk manages all of your software installs. Plesk includes Plesk specific versions of Apache, PHP, and MySQL. All patches and updates can only come from SWSoft, or the Plesk universe will crash. And Plesk ties you to a specific FreeBSD version too. Plesk versions lag big time for FreeBSD. But on the other hand, it is big GUI thing, and people like it. Tom ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable- [EMAIL PROTECTED]" ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
For most versions of plesk i've come across (I look after a load of linux servers with it installed,) if you have the plesk admin then you have root. Look for the modules option, then look for the add modules, this should let you upload a shell script which is then run as root (horribly insecure but thats plesk, and if you fiddle with their setting enough you can change the css of the webapp not to display the page) If this is the same on FreeBSD as on linux you can create a new UID 0 user if need be using pw in a shell script, or you can put a ssh public key in to roots authorized_keys file. I'd definitely advise you get plesk removed if you intend to administrate the box by hand though. If thats no help, when you log into the box by ssh, what is the output of grep root /etc/passwd it should be something like root:*:0:0:Charlie &:/root:/bin/csh if not then they have renamed/removed root so try looking in /etc/passwd for a user with uid of 0 (third field.) This should at least get you a username to ask their support about. If they have actually removed the root user your a bit stuffed and Hope some of thats some help. Vince Michael Williams wrote: > Tom, > > Again, Plesk just came with the server config we asked for. We didn't > ask for Plesk, we *asked* for the specific hardware. Plesk was "free". > *rolls eyes* > > Regards, > Michael > > On Jul 16, 2007, at 3:17 AM, Tom Samplonius wrote: > >> >> - "Michael Williams" <[EMAIL PROTECTED]> wrote: >>> No, I don't necessarily need Plesk; although we will be selling >>> hosting. It simply came with the default configuration for the >>> server. My plan is to manage most everything from the Unix shell. I >>> >>> just figured I might find a morsel inside Plesk somewhere for >>> enabling root access. FYI, logging in as admin didn't work. Any >>> other suggestions? >> >> You are probably better off just asking the hosting company for the >> password. You need the root password, and you need to have an account >> that is a member of the wheel group (use "groups" when you ssh to see >> if your account is ok). >> >> They might have flagged you as a newbie, and think you are better >> off inside the padded confines of Plesk. I work at a hosting company, >> and a whole bunch of our dedicated server customers are in over their >> heads with their servers as it is. Given that you asked for Plesk, >> and are now asking for root, they are probably has made them worried >> that the next call from you will be that you deleted /etc, and your >> server won't boot anymore. >> >> If you are planning to do any admin via ssh with root, you will not >> want Plesk. Plesk manages all of your software installs. Plesk >> includes Plesk specific versions of Apache, PHP, and MySQL. All >> patches and updates can only come from SWSoft, or the Plesk universe >> will crash. And Plesk ties you to a specific FreeBSD version too. >> Plesk versions lag big time for FreeBSD. But on the other hand, it is >> big GUI thing, and people like it. >> >> >> Tom > > ___ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
On Mon, Jul 16, 2007 at 08:52:28AM -0400, Michael Williams wrote: > Also, if you follow the thread, you'll note that we've asked for root > several times. Yet, they keep asking us for the root password so that they > can make changes. A lot of canned responses, etc. Again, no offence, but this is something you need to take up with Cedant. It's fairly obvious at this point that it's not an issue with FreeBSD, but rather Cedant's hosting/service environment. If a provider whom you've established service with continues to give you "canned responses" and general runarounds, and you cannot get them to give you something as simple as root-level access to your own machine, then it's not worth hosting with them. They sound inept, plain and simple, and that's disappointing. Not to dishearten you, but this is exactly why I try to avoid hosting providers (and I happen to be one, just not commercial) -- "dedicated" boxes turning out to be Plesk-managed virtual environments, or a VMware box split across an undisclosed number of other users using the same hardware, same disk, etc... One customer gets DoS'd and it affects you and everyone else. Hard disk failure, same thing. I prefer co-location; give me access to a cooled datacenter, a secure cabinet, and a network drop and leave the rest to me. Of course, the difference in price between the two methods is quite severe. :-) -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
On Mon, 16 Jul 2007 08:52:28 -0400 Michael Williams <[EMAIL PROTECTED]> wrote: > Also, if you follow the thread, you'll note that we've asked for root > several times. Yet, they keep asking us for the root password so > that they can make changes. A lot of canned responses, etc. ack - added them to my 'do not touch' hosting companies. cheers! _ {Beto|Norberto|Numard} Meijome "The freethinking of one age is the common sense of the next." Matthew Arnold I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
Also, if you follow the thread, you'll note that we've asked for root several times. Yet, they keep asking us for the root password so that they can make changes. A lot of canned responses, etc. Regards, Michael On Jul 16, 2007, at 3:17 AM, Tom Samplonius wrote: - "Michael Williams" <[EMAIL PROTECTED]> wrote: No, I don't necessarily need Plesk; although we will be selling hosting. It simply came with the default configuration for the server. My plan is to manage most everything from the Unix shell. I just figured I might find a morsel inside Plesk somewhere for enabling root access. FYI, logging in as admin didn't work. Any other suggestions? You are probably better off just asking the hosting company for the password. You need the root password, and you need to have an account that is a member of the wheel group (use "groups" when you ssh to see if your account is ok). They might have flagged you as a newbie, and think you are better off inside the padded confines of Plesk. I work at a hosting company, and a whole bunch of our dedicated server customers are in over their heads with their servers as it is. Given that you asked for Plesk, and are now asking for root, they are probably has made them worried that the next call from you will be that you deleted / etc, and your server won't boot anymore. If you are planning to do any admin via ssh with root, you will not want Plesk. Plesk manages all of your software installs. Plesk includes Plesk specific versions of Apache, PHP, and MySQL. All patches and updates can only come from SWSoft, or the Plesk universe will crash. And Plesk ties you to a specific FreeBSD version too. Plesk versions lag big time for FreeBSD. But on the other hand, it is big GUI thing, and people like it. Tom ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
Tom, Again, Plesk just came with the server config we asked for. We didn't ask for Plesk, we *asked* for the specific hardware. Plesk was "free". *rolls eyes* Regards, Michael On Jul 16, 2007, at 3:17 AM, Tom Samplonius wrote: - "Michael Williams" <[EMAIL PROTECTED]> wrote: No, I don't necessarily need Plesk; although we will be selling hosting. It simply came with the default configuration for the server. My plan is to manage most everything from the Unix shell. I just figured I might find a morsel inside Plesk somewhere for enabling root access. FYI, logging in as admin didn't work. Any other suggestions? You are probably better off just asking the hosting company for the password. You need the root password, and you need to have an account that is a member of the wheel group (use "groups" when you ssh to see if your account is ok). They might have flagged you as a newbie, and think you are better off inside the padded confines of Plesk. I work at a hosting company, and a whole bunch of our dedicated server customers are in over their heads with their servers as it is. Given that you asked for Plesk, and are now asking for root, they are probably has made them worried that the next call from you will be that you deleted / etc, and your server won't boot anymore. If you are planning to do any admin via ssh with root, you will not want Plesk. Plesk manages all of your software installs. Plesk includes Plesk specific versions of Apache, PHP, and MySQL. All patches and updates can only come from SWSoft, or the Plesk universe will crash. And Plesk ties you to a specific FreeBSD version too. Plesk versions lag big time for FreeBSD. But on the other hand, it is big GUI thing, and people like it. Tom ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
- "Michael Williams" <[EMAIL PROTECTED]> wrote: > No, I don't necessarily need Plesk; although we will be selling > hosting. It simply came with the default configuration for the > server. My plan is to manage most everything from the Unix shell. I > > just figured I might find a morsel inside Plesk somewhere for > enabling root access. FYI, logging in as admin didn't work. Any > other suggestions? You are probably better off just asking the hosting company for the password. You need the root password, and you need to have an account that is a member of the wheel group (use "groups" when you ssh to see if your account is ok). They might have flagged you as a newbie, and think you are better off inside the padded confines of Plesk. I work at a hosting company, and a whole bunch of our dedicated server customers are in over their heads with their servers as it is. Given that you asked for Plesk, and are now asking for root, they are probably has made them worried that the next call from you will be that you deleted /etc, and your server won't boot anymore. If you are planning to do any admin via ssh with root, you will not want Plesk. Plesk manages all of your software installs. Plesk includes Plesk specific versions of Apache, PHP, and MySQL. All patches and updates can only come from SWSoft, or the Plesk universe will crash. And Plesk ties you to a specific FreeBSD version too. Plesk versions lag big time for FreeBSD. But on the other hand, it is big GUI thing, and people like it. Tom ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
No, I don't necessarily need Plesk; although we will be selling hosting. It simply came with the default configuration for the server. My plan is to manage most everything from the Unix shell. I just figured I might find a morsel inside Plesk somewhere for enabling root access. FYI, logging in as admin didn't work. Any other suggestions? Regards, Michael On Jul 16, 2007, at 2:04 AM, Norberto Meijome wrote: On Sun, 15 Jul 2007 21:35:52 -0400 Michael Williams <[EMAIL PROTECTED]> wrote: . Anyway, if you can think of *any* solution to this issue, it'd be much appreciated. For the record, the following are my Plesk Control Panel offerings for SSH login: Hi Michael, you hadn't mentioned you are using Plesk :) /bin/sh /bin/csh /bin/tcsh /bin/sh(chrooted) /usr/local/bin/bash Make sure you choose /bin/sh (NOT CHROOTED). also, if you are SSHing to your server via an account created with Plesk, which can creates chroots environments for those accounts. Try ssh as admin with your plesk password straight into the box. If I may ask, do you need Plesk? For some users and situations, it may be a good tool ( shared webhosting with many accounts ), and even in those cases I've found it to be more problem that is worth it, as it adds so many layers of scripts and software that you are mostly stuck with whatever is compatible with Plesk, or hacks around that (either way, not ideal). YMMV, of course. B _ {Beto|Norberto|Numard} Meijome "Egotism is the anesthetic that dulls the pain of stupidity." Frank Leahy I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
On Sun, 15 Jul 2007 21:35:52 -0400 Michael Williams <[EMAIL PROTECTED]> wrote: > . Anyway, if > you can think of *any* solution to this issue, it'd be much > appreciated. For the record, the following are my Plesk Control > Panel offerings for SSH login: Hi Michael, you hadn't mentioned you are using Plesk :) > > /bin/sh > /bin/csh > /bin/tcsh > /bin/sh(chrooted) > /usr/local/bin/bash Make sure you choose /bin/sh (NOT CHROOTED). also, if you are SSHing to your server via an account created with Plesk, which can creates chroots environments for those accounts. Try ssh as admin with your plesk password straight into the box. If I may ask, do you need Plesk? For some users and situations, it may be a good tool ( shared webhosting with many accounts ), and even in those cases I've found it to be more problem that is worth it, as it adds so many layers of scripts and software that you are mostly stuck with whatever is compatible with Plesk, or hacks around that (either way, not ideal). YMMV, of course. B _ {Beto|Norberto|Numard} Meijome "Egotism is the anesthetic that dulls the pain of stupidity." Frank Leahy I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
Well, that's just it. As with many large corporations, there appear to be a great many degrees of separation between the folks we're talking to and the folks we *need* to talk to. That aside, we've been assured that it is absolutely our own dedicated server. (It'd better be as we just upgraded from Virtual to Dedicated hardware). I'm at wits end regarding this issue though. I'm tempted to simply go back to hosted solutions instead of dealing with this. Anyway, if you can think of *any* solution to this issue, it'd be much appreciated. For the record, the following are my Plesk Control Panel offerings for SSH login: /bin/sh /bin/csh /bin/tcsh /bin/sh(chrooted) /usr/local/bin/bash . . .I've tried each, to no avail. I'm absolutely 100% lost. Regards, Michael On Jul 13, 2007, at 8:00 AM, [EMAIL PROTECTED] wrote: Message: 16 Date: Thu, 12 Jul 2007 20:35:52 -0700 From: Jeremy Chadwick <[EMAIL PROTECTED]> Subject: Re: HOW TO: Enabling root on a new server? To: Michael Williams <[EMAIL PROTECTED]> Cc: freebsd-stable@freebsd.org Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=us-ascii On Thu, Jul 12, 2007 at 11:06:07PM -0400, Michael Williams wrote: I recently purchased a co-located server from Cedant and need to enable the root user. It's running FreeBSD 6.1. Currently there appears to be no root user enabled on the server. I can't even "su" to root. I've tried using "pw" to add my user to "wheel" but I receive a warning informing me that I must be root to even do such a thing. You can see my quandary. Please advise. FreeBSD, out-of-the-box, definitely includes user "root", and there is no password (unless during the installation you choose to set one). This sounds like a question you should be talking to Cedant/your provider about. What you purchased may not be a real co-located box that's personally dedicated to you -- it may be something shared with other people, and something that Cedant maintains. This is purely speculative on my part, because I know nothing about their services. But this really does sound like something specific to their servers. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HOW TO: Enabling root on a new server?
On Thu, Jul 12, 2007 at 11:06:07PM -0400, Michael Williams wrote: > I recently purchased a co-located server from Cedant and need to enable the > root user. It's running FreeBSD 6.1. Currently there appears to be no root > user enabled on the server. I can't even "su" to root. I've tried using > "pw" to add my user to "wheel" but I receive a warning informing me that I > must be root to even do such a thing. You can see my quandary. Please > advise. FreeBSD, out-of-the-box, definitely includes user "root", and there is no password (unless during the installation you choose to set one). This sounds like a question you should be talking to Cedant/your provider about. What you purchased may not be a real co-located box that's personally dedicated to you -- it may be something shared with other people, and something that Cedant maintains. This is purely speculative on my part, because I know nothing about their services. But this really does sound like something specific to their servers. -- | Jeremy Chadwickjdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
HOW TO: Enabling root on a new server?
Hi All, I recently purchased a co-located server from Cedant and need to enable the root user. It's running FreeBSD 6.1. Currently there appears to be no root user enabled on the server. I can't even "su" to root. I've tried using "pw" to add my user to "wheel" but I receive a warning informing me that I must be root to even do such a thing. You can see my quandary. Please advise. Regards, Michael ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"