Re: rlm_ippool
Is the profile using the 2 pools? On Sat, 2003-12-06 at 12:51, Rodrigo A. Simões wrote: > Hi, > > I'm trying to use rlm_ipool with 2 subnets, but it doesn't work. Look: > > ippool pool_1 { > range-start = X.X.1.1 > range-stop = X.X.1.254 > netmask = 255.255.255.255 > cache-size = 800 > session-db = ${raddbdir}/db.ippool > ip-index = ${raddbdir}/db.ipindex > override = no > } > > ippool pool_2 { > range-start = X.X.3.1 > range-stop = X.X.3.254 > netmask = 255.255.255.255 > cache-size = 800 > session-db = ${raddbdir}/db.ippool > ip-index = ${raddbdir}/db.ipindex > override = no > } > > The 2 pools are listed in pre-auth and accounting sessions... > > id GroupName Attribute op Value > 4 broadband Pool-Name := pool_2 > 3 broadband Pool-Name := pool_1 > > When the 1st pool is full, the rlm_ippool don't allocate any more ip's for my > customers... > > Any advice? > > Thanks! > > - > Enviado pelo WebMail LIFE: http://webmail.life.com.br > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Hola ayudame Gustavo Lozano
OOps. This went to the wrong site On Thu, 2003-11-20 at 09:28, Gustavo A. Lozano wrote: > Tomas > > Bueno ya encontre una ventanita de tiempo para escribirte > > cuando vas a compilar freeradius necesitas habilitar el soporte para > rlm_counter. Mira la documentacion y me cuenta si no logras compilar. > > Slds > > > On Mon, 2003-11-17 at 18:08, Tomas Lagunas wrote: > > Hola Gustavo como estas me llamo Tomas Lagunas he > > estado buscado informacion de freeradius tengo un > > freeradius 9.0. en linux lo tengo trabajando con mysql > > y phpmyadmin, ya lo conecte al cisco y lo congifure. > > y funciona cada ves que se hace una llamada el > > freeradius la detecta y muestra el tiempo que > > tracurrio la llamda. > > pero mi problema Gustavo es que deseo establecer la > > cuota a cada usuario para que durante cada llamada se > > valla descontando su saldo. > > > > Vi tu correo y comentaste que Utilizara el modulo > > rlm_counter, entre a esa carpeta pero encontre > > algunos archivos que estaban vacios, pero encontre un > > archivo llamado configure, no se si se tenga que > > ejecutar ./configure. > > > > Por favor Gustavo ayudame te lo suplico no se como > > le voy hacer. si quieres pasame tu telefono y > > llamo. > > Te mando un Fuerte Saludo esperando que me contestes > > por favor por que el radius me quita el sueño. > > > > > > _ > > Do You Yahoo!? > > La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. > > http://net.yahoo.com.mx > > > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Hola ayudame Gustavo Lozano
Tomas Bueno ya encontre una ventanita de tiempo para escribirte cuando vas a compilar freeradius necesitas habilitar el soporte para rlm_counter. Mira la documentacion y me cuenta si no logras compilar. Slds On Mon, 2003-11-17 at 18:08, Tomas Lagunas wrote: > Hola Gustavo como estas me llamo Tomas Lagunas he > estado buscado informacion de freeradius tengo un > freeradius 9.0. en linux lo tengo trabajando con mysql > y phpmyadmin, ya lo conecte al cisco y lo congifure. > y funciona cada ves que se hace una llamada el > freeradius la detecta y muestra el tiempo que > tracurrio la llamda. > pero mi problema Gustavo es que deseo establecer la > cuota a cada usuario para que durante cada llamada se > valla descontando su saldo. > > Vi tu correo y comentaste que Utilizara el modulo > rlm_counter, entre a esa carpeta pero encontre > algunos archivos que estaban vacios, pero encontre un > archivo llamado configure, no se si se tenga que > ejecutar ./configure. > > Por favor Gustavo ayudame te lo suplico no se como > le voy hacer. si quieres pasame tu telefono y > llamo. > Te mando un Fuerte Saludo esperando que me contestes > por favor por que el radius me quita el sueño. > > > _ > Do You Yahoo!? > La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. > http://net.yahoo.com.mx > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Hola ayudame Gustavo Lozano
Tomas, first of all please write to the list in English. I dont mind to write in spanish as it is my native language but talking in english here is the "default" :) Second, writing in the list to a direct person (just like you are doing to me) is not a good idea, you can probably write direct to me and if your mail is not spam, you can be sure the mail will arrive to my inbox and I will take a minute or two to send you a reply, may be after that, you can take the time to write something back to the list showing your work and what you did in order to help others. Well, after the politics, I will take a look of your problem and send a more detailed answer (than the one with the rlm_counter thing) directly to you in spanish. Regards!! On Mon, 2003-11-17 at 18:08, Tomas Lagunas wrote: > Hola Gustavo como estas me llamo Tomas Lagunas he > estado buscado informacion de freeradius tengo un > freeradius 9.0. en linux lo tengo trabajando con mysql > y phpmyadmin, ya lo conecte al cisco y lo congifure. > y funciona cada ves que se hace una llamada el > freeradius la detecta y muestra el tiempo que > tracurrio la llamda. > pero mi problema Gustavo es que deseo establecer la > cuota a cada usuario para que durante cada llamada se > valla descontando su saldo. > > Vi tu correo y comentaste que Utilizara el modulo > rlm_counter, entre a esa carpeta pero encontre > algunos archivos que estaban vacios, pero encontre un > archivo llamado configure, no se si se tenga que > ejecutar ./configure. > > Por favor Gustavo ayudame te lo suplico no se como > le voy hacer. si quieres pasame tu telefono y > llamo. > Te mando un Fuerte Saludo esperando que me contestes > por favor por que el radius me quita el sueño. > > > _ > Do You Yahoo!? > La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. > http://net.yahoo.com.mx > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: What is the best "Flavor" of Linux to use with FreeRadius?
I think this is going to be a "Religious" matter. Many people likes Slackware Many People likes Debian Many People likes Suse Many people likes redhat Others Trustix or Mandrake. If you are new to linux I think this is not the place to discuss which one is better. Without being mad, this is a freeradius list :), lets try to keep the hard fights over Linux distros outside here :) On Thu, 2003-11-06 at 11:08, Chris Parker wrote: > At 10:02 AM 11/6/2003, Kristina Pfaff-Harris wrote: > >On Thu, 6 Nov 2003, Michael Melanson wrote: > > > > > I am new to linux as well as free radius. > > > > > > I am involved in a project to create an open network architechure. > > > > > > I envision radius and eap to accomplish this > > > > > > Please advise what is the best Linux to use with free radius > > > >Hi. I really agree with Thor Spruyt who said that you should install some > >distributions and see which one you feel most comfortable with. RedHat is > >going to more of a high-priced subscription version, so you may want to > >try out its free version, "Fedora" (http://fedora.redhat.com/) if your > >budget is a concern. Novell just bought SuSE Linux, so I'm not sure how > >that's going to pan out, support and price-wise. My favorite is Debian for > >various reasons including ease of install/upgrade and stability, but > >really, try out several, read the documentation, and see which one you > >like best. > > My 2 cents worth, is take a look at Slackware. :) > > >You might also consider trying OpenBSD or FreeBSD instead of a Linux > >distribution. > > There are some thread issues on Free/Open BSD at the moment I believe > so you might not get the best performance out of FreeRADIUS on those > systems. > > The latest FreeBSD release adds some previously missing functions to > FreeBSD ( namely a working threadsafe get(host|name)by*_r() ). The > work to add that to the configure/build process has not been done > yet however. > > -Chris > -- > \\\|||/// \ StarNet Inc. \ Chris Parker > \ ~ ~ / \ WX *is* Wireless!\ Director, Engineering > | @ @ |\ http://www.starnetwx.net \ (847) 963-0116 > oOo---(_)---oOo--\-- >\ Wholesale Internet Services - http://www.megapop.net > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Problem with Accounting-On packet
I know that but after I commented the radzap entry in rlm_unix the thing is working good... On Fri, 2003-10-31 at 20:52, Kostas Kalevras wrote: > On Thu, 30 Oct 2003, Gustavo A. Lozano wrote: > > > Hello. > > > > I have a very big problem with one NAS. The machine is sending > > accounting-on packets every 2 seconds, so the wtmp and rlm_ippool > > modules are not working. Every time the packet is received by the > > radius, the wtmp and ip_pool dbs are reset. > > > There's currently no support for accounting-on/off packets in rlm_ippool so i > don't think that it's possible for the db to get reset. > > > > > The radius.log file shows the next every 2-3 seconds: > > > > Thu Oct 30 16:12:36 2003 : Info: rlm_radutmp: NAS 123.456.789.012 > > restarted (Accounting-On packet seen) > > > > > > Well, What I need is a patch/way to tell the radius to ignore the > > accounting-on packets while the people of the factory can repair the > > nas. > > > > > > Any ideas??? > > > > > > Gustavo > > > > > > > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > -- > Kostas Kalevras Network Operations Center > [EMAIL PROTECTED] National Technical University of Athens, Greece > Work Phone: +30 210 7721861 > 'Go back to the shadow' Gandalf > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: new development: rlm_?????? for detail in csv mode
Seems a good approach, I wrote something in awk but takes lots of time to process big detail files. I will take a look of the rlm_perl. Thanks On Fri, 2003-10-31 at 20:39, Kostas Kalevras wrote: > On Fri, 31 Oct 2003, Gustavo A. Lozano wrote: > > > Hello. > > > > Somebody came to us with the need to produce the same result of the > > detail files in a csv file. the database backend is not enough as they > > need the whole bunch of pairs contained in a standard detail file. > > > > Well the question here is if somebody have something near, to place the > > records just as they come in the accounting package from the nas in > > something like this: > > > > User-Name = test,Called-Station-Id = , Calling Station-Id = > > 1, ... Timestamp = 123123123123\n > > > > If nobody have something, well may be I will take a look of rlm_detail > > and based on that, write the thing down... but you never know, may be > > somebody already have the job done... > > I don't know of anything readily available to do that sort of thing. Though it > should not be more than a few lines in perl. So your best/quicker shot is to > create a small perl script to do the job and run that through rlm_perl. > > > > > > > Gustavo > > > > > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > -- > Kostas Kalevras Network Operations Center > [EMAIL PROTECTED] National Technical University of Athens, Greece > Work Phone: +30 210 7721861 > 'Go back to the shadow' Gandalf > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
new development: rlm_?????? for detail in csv mode
Hello. Somebody came to us with the need to produce the same result of the detail files in a csv file. the database backend is not enough as they need the whole bunch of pairs contained in a standard detail file. Well the question here is if somebody have something near, to place the records just as they come in the accounting package from the nas in something like this: User-Name = test,Called-Station-Id = , Calling Station-Id = 1, ... Timestamp = 123123123123\n If nobody have something, well may be I will take a look of rlm_detail and based on that, write the thing down... but you never know, may be somebody already have the job done... Gustavo - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Problem with Accounting-On packet
Well, I think I got it, I am going to comment out the radzap line in rlm_utmp.c and see if it works :) Any comment from anybody? On Thu, 2003-10-30 at 16:22, Gustavo A. Lozano wrote: > Hello. > > I have a very big problem with one NAS. The machine is sending > accounting-on packets every 2 seconds, so the wtmp and rlm_ippool > modules are not working. Every time the packet is received by the > radius, the wtmp and ip_pool dbs are reset. > > The radius.log file shows the next every 2-3 seconds: > > Thu Oct 30 16:12:36 2003 : Info: rlm_radutmp: NAS 123.456.789.012 > restarted (Accounting-On packet seen) > > > Well, What I need is a patch/way to tell the radius to ignore the > accounting-on packets while the people of the factory can repair the > nas. > > > Any ideas??? > > > Gustavo > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Problem with Accounting-On packet
Hello. I have a very big problem with one NAS. The machine is sending accounting-on packets every 2 seconds, so the wtmp and rlm_ippool modules are not working. Every time the packet is received by the radius, the wtmp and ip_pool dbs are reset. The radius.log file shows the next every 2-3 seconds: Thu Oct 30 16:12:36 2003 : Info: rlm_radutmp: NAS 123.456.789.012 restarted (Accounting-On packet seen) Well, What I need is a patch/way to tell the radius to ignore the accounting-on packets while the people of the factory can repair the nas. Any ideas??? Gustavo - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Re[2]: ippool issue
You need an address in the RAS to act as a gateway... You can configure any pool in whatever RAS but for example if the RAS is a cisco you will need to do something like: interface eth0 ip add xxx.xxx.xxx.1 secondary interface eth0 ip add yyy.yyy.yyy.1 secondary .. ... and now you can assign address within the blocks xxx.xxx.xxx.xxx and yyy.yyy.yyy.yyy The thing is you need to RAS as gateway for the dialin users On Wed, 2003-10-29 at 20:14, Alexander Lunyov wrote: > Hello Gustavo, > > Wednesday, October 29, 2003, 8:42:51 AM, you wrote: > > > > GAL> Sure you can. > GAL> But if you do that you cant get routed to any place. > > GAL> You need a gateway address within the same logical network. > > What do you mean? NAS in the same logical network or radius server in the > same logical network? > > For example, i want this ippool working with NAS. > > ippool main_pool { > range-start = 192.168.253.1 > range-stop = 192.168.253.254 > netmask = 255.255.0.0 > cache-size = 800 > session-db = ${raddbdir}/db.ippool > ip-index = ${raddbdir}/db.ipindex > override = no > } > > NAS is a FreeBSD box with 3 multiport cards and 2 network > interfaces. First iface is 192.168.33.127/24, second is > x.x.x.2/24 ('white' network). So when authentification of ppp session is done > and > it's time to receive IP address for this session, radiusd cannot > find range for this NAS. It says > > rad_recv: Access-Request packet from host x.x.x.2:2740, id=239, length=105 > Thread 1 assigned request 0 > --- Walking the entire request list --- > Threads: total/active/spare threads = 5/1/4 > Waking up in 5 seconds... > Thread 1 handling request 0, (1 handled so far) > User-Name = "lan" > Service-Type = Framed-User > Framed-Protocol = PPP > CHAP-Password = 0x0176a7169a89a0a8s8aa34a03e630f1ead > CHAP-Challenge = 0x38328232349865433746313036313635 > NAS-Identifier = "zeus.domain.ru" > NAS-Port-Type = Ethernet > NAS-Port = 61 > > [authentification and other skip] > > rlm_ippool: Searching for an entry for nas/port: zeus.domain.ru/61 > modcall[post-auth]: module "main_pool" returns noop for request 0 > modcall: group post-auth returns noop for request 0 > Sending Access-Accept of id 239 to x.x.x.2:2740 > Framed-Compression = Van-Jacobson-TCP-IP > Idle-Timeout = 10 > Framed-MTU = 576 > Framed-IP-Address = 255.255.255.254 > Framed-Protocol = PPP > Service-Type = Framed-User > Finished request 0 > > What should i do? Is there any 'magic word'? :) > > > > GAL> On Wed, 2003-10-29 at 19:29, Alexander Lunyov wrote: > >> Hello freeradius-users, > >> > >> Is there a possibility to pool range of IP addresses for NAS > >> while NAS is not in that range? For example, if i try to pool > >> 192.168.253.0/24 network for NAS with address 192.168.3.3 - it > >> says that nas/port not found for that NAS address (192.168.3.3). > >> is it possible to assign to NAS client IP address not from NAS > >> network? > > > GAL> - > GAL> List info/subscribe/unsubscribe? See > GAL> http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: ippool issue
Sure you can. But if you do that you cant get routed to any place. You need a gateway address within the same logical network. On Wed, 2003-10-29 at 19:29, Alexander Lunyov wrote: > Hello freeradius-users, > > Is there a possibility to pool range of IP addresses for NAS > while NAS is not in that range? For example, if i try to pool > 192.168.253.0/24 network for NAS with address 192.168.3.3 - it > says that nas/port not found for that NAS address (192.168.3.3). > is it possible to assign to NAS client IP address not from NAS > network? - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Modems can login but ISDN users cannot?
First of all Try a debug with radiusd -x then check configuration may be the user is trying to use the second ISDN channel and your radius doesnt let him use it.. May be there is some issue with the NAS and nothing with the radius itself.. On Wed, 2003-10-29 at 14:43, James Green wrote: > Hi all, > > Got a FreeRadius installation working fine for analog modem users. A > client is now trying to send through loads of ISDN traffic, and he's > getting the following: > > 691: username/password declined (windows errors message) > > radius.log shows his test username as Login: ok. Yet Radius isn't > logging him in the details logs at all. > > Any ideas? > > Thanks, > > James > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
filtering connections per calledstationid
Hello. We are trying to setup an enviroment where users in profile 1 will only have access to calledstationid= and users in profile 2 will only have access to calledstationid=222 and so on... well, we tried huntgroups and checkitems but they dont work as expected.. Any notes? Rgds Gustavo - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: rlm-ippool not deallocating ip addresses
Use 0.9 then you need to constantly see what IP is being used (using radwho) and rebuilding the dbs. Also you can test the CVS branch, the team is asking for people to test the new module as soon as possible. If you will use the CVS branch ok, if you will use the standard 0.9 post again and I will post the programs and scripts needed to have the database up to date. On Thu, 2003-08-28 at 04:39, Mohsen Chirara wrote: > Hi, I installed freeradius version 9. pre-1 (just before the version 9 > was released) on a debian system. > > Everything is working fine except for the deallocation on rlm-ippool. > > I have a pool defined in radiusd.conf : > > ippool private_pool { > > range-start = 172.16.4.1 > range-stop = 172.16.4.254 > netmask = 255.255.255.0 > cache-size = 5000 > session-db = ${raddbdir}/db.privatepool > ip-index = ${raddbdir}/db.privateindex > override = yes > } > > > The problem is after a day or 2, no more IP address are available, at > first, freeradius deallocates IP addresses > then it stops deallocating for some reason. > > Any clue ? > > Regards > Mohsen > --- > Ce mail ne contient pas de virus. This mail is virus free > Scanné par Escan Checked by Escan -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[Freeradius-users] Change in Subject Request
I think it will be better to add something to the subject of the list, dont you people think the same? Something like this example... Rgds -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: caller id ?
By default it is enabled as it is an attribute the NAS send to the radius server. check your detail files for Called-Station-Id If you dont have the information in the detail files, then your NAS is not sending the information, may be because the lines attached are not configured to get called-id On Sat, 2003-08-09 at 12:24, Zoup wrote: > Hi guys :) > > did you get caller id working with FreeRadius ? -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Log file
Diego First of all I think you sould read the entire documentation before you try the software, also please read the entire FAQ. Also to know a little about the RADIUS thing will be great. Well, regarding your last question, you dont run your server with any arguments at all, just run it as radiusd the detail files are created on the fly and rotated every XX time if you have configured the right things in radiusd.conf see the file doc/rlm_detail from the source distribution. Rgds On Mon, 2003-08-11 at 11:33, Diego Andres Asenjo Gonzalez wrote: > Hi, thanks for your reply! > > How often is created this file, I'm seeing the logs but not the detail > files. > > Do I need a special configuration ?? > > Do I have to run the daemon with the -A parameter ? > > Thanks! > Bye .. and long life to Linux! > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Sorry for the insistence. (Logs)
Did you read rlm_detail? On Tue, 2003-08-12 at 08:58, Diego Andres Asenjo Gonzalez wrote: > Hi! > Thank for your reply! > > This is result of running the server in debug mode: > > #radiusd -y -x > Starting - reading configuration files ... > Ready to process requests. > radrecv: Request from host 200.30.71.1 code=1, id=255, length=97 > User-Name = "alfonso" > Password = "\335\375\312\234_" > NAS-IP-Address = 200.30.71.1 > NAS-Port-Id = 20105 > NAS-Port-Type = Async > Service-Type = Framed-User > Framed-Protocol = PPP > State = "" > Calling-Station-Id = "28222153" > Framed-IP-Address = 200.30.71.9 > Acct-Session-Id = "427071528" > Sending Ack of id 255 to 200.30.71.1 (nas asgard) > Session-Timeout = 28800 > Idle-Timeout = 1800 > Framed-Protocol = PPP > Framed-Compression = Van-Jacobson-TCP-IP > Login OK: [alfonso] (from nas asgard/S20105) > > I need this information, but in the detail files, every hour. > > Thanks. -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Sorry for the insistence. (Logs)
That may be dont know, is because you have radactdir/asgard/detail-x remove the "asgard" thing. It should be something like detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d On Tue, 2003-08-12 at 07:58, Diego Andres Asenjo Gonzalez wrote: > Hi to all! > > Sorry for the insistence , but my problem is real, I'm working in a > server that is installed and running. The files corresponding to the > details aren't in the server. Please look at my configuration in > /usr/local/etc/raddb/radiusd.conf > > prefix = /usr/local > localstatedir = ${prefix}/var > logdir = ${localstatedir}/log/radius > radacctdir = ${logdir}/radacct > > modules{ > > detail{ > detailfile = ${radacctdir}/asgard/detail-%Y%m%d:%H > detailperm = 600 > } > > acct_unique { > key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, > NAS-Port-Id" > } > ... > } > > accounting { > acct_unique > detail > unix > radutmp > } > > > I really don't know why even the directory have not been created. > I need help. There are problems with the server and we need the details > quickly cause the disconnection causes seem to be so strange. > > Thanks for your replies and your patience. > > Long life to Linux. > > Bye. -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Log file
Diego. Al the information you want is stored in the detail files. var/log/radiusd/radacct/NAS-IP/detail* On Mon, 2003-08-11 at 09:44, Diego Andres Asenjo Gonzalez wrote: > Thanks for your reply. > > It was a big error. I'm new to freeradius and I couldn't find help in google. > > I have another question .. Can I see more information in the log ?? > > I want to see disconnection causes, phone numbers, etc .. I'm just seeing something > like that: > > Mon Aug 11 09:27:10 2003 : Auth: Login OK: [marmejia] (from client asgard port 20132 > cli 28239904) > Mon Aug 11 09:27:11 2003 : Auth: Login OK: [marmejia] (from client asgard port 20132 > cli 28239904) > Mon Aug 11 09:27:56 2003 : Auth: Login OK: [marmejia] (from client asgard port 20106 > cli 28239904) > Mon Aug 11 09:27:56 2003 : Auth: Login OK: [marmejia] (from client asgard port 20106 > cli 28239904) > Mon Aug 11 09:28:39 2003 : Auth: Login OK: [marmejia] (from client asgard port 20111 > cli 28239904) > Mon Aug 11 09:29:50 2003 : Auth: Login OK: [davelasco] (from client asgard port > 20126 cli 28230577) > > I mean, something like with the -x parameter but in the log file. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: Experience
Hello We have using freeradius for over 2 years now. ahmm the count of RAS is like 35 in this moment. Platfforms: Linux Intel and Solaris Sparc. All support over LDAP right now, and works pretty cool. Pros: everything cons: ahmm, as we managed a central site, and the Terminal servers are around the country, there are times of "great delay" and the querys dont work, so users cannot get authenticated. We have worked a lot in that issue and now it is almost 99.9% of logins authenticated. Rgds On Tuesday 29 October 2002 08:12, Zack W Kneisley wrote: > I've been watching this list for some time now, and it seems that > Freeradius is much more robust than I previously thought. Could some > users of this list give me some configuration examples (users served, > how many NAS's using, Hardware & OS's being used, using sql, how long > you have been using it ect. ) I have been looking into several different > radius packages and it seems Freeradius can do almost everything the > others can. If you could provide me with successful read-world > deployments, the pros & cons, I encourage you to post them. > > Zack Kneisley -- _________ __ Gustavo A. Lozano Noldata Corporation [EMAIL PROTECTED] Calle 46 No. 40-19 CTO Bogota D.C. Colombia Noldata Corporation http://noldata.com I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones. Albert Einstein - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html