Re: FreeRadius - DLINK DWL-900+ - 802.1.X
At 08:56 04/06/2003 -0600, you wrote:
What is your ap?
DLINK DWL-900+
, you set up the eap and wep key,
Yes, I did.
regards.
in the cisco 1200 ap this
is import.
att.
Mauricio
- Original Message -
From: "Pascal PELONI" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 03, 2003 9:24 AM
Subject: Re: FreeRadius - DLINK DWL-900+ - 802.1.X
> I forget to say that :
>
> 1. the authentication works well with radtest !
>
> $ radtest tst1 pp 127.0.0.1 1 test
> Sending Access-Request of id 68 to 127.0.0.1:1812
> User-Name = "tst1"
> User-Password =
> "\323\366\273\363\371Z\250]\231(w\265?\346G\253"
> NAS-IP-Address = localhost
> NAS-Port = 1
> rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
>
> 2. with my AP I have the following output in radius.log :
>
> Auth: Login incorrect: [pelo/]
>
> Thanks.
>
> At 16:58 03/06/2003 +0200, you wrote:
> >I've already read the FAQ and the README's, but it still doesn't work.
> >
> >Here is part of my config :
> >
> >radiusd.conf
> >
> >modules {
> > eap {
> > default_eap_type = md5
> > md5 {
> > }
> > }
> >}
> >
> >authorize {
> > eap
> >}
> >
> >authenticate {
> > eap
> >}
> >
> >client.conf
> >---
> >client localhost {
> > secret = test
> > nastype = other
> > shortname = test
> >}
> >
> >huntgroups
> >--
> >TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
> >
> >users
> >-
> >DEFAULT Huntgroup-Name == "TEST"
> > Framed-IP-Address = 192.168.1.11+
> >
> >tst1User-Password == "pp"
> >
> >tst2Auth-Type := Local, User-Password == "pp"
> >
> >Could someone help ?
> >
> >Thanks, PP.
> >
> >
> >
> >At 09:31 30/05/2003 -0400, you wrote:
> >>Pascal PELONI <[EMAIL PROTECTED]> wrote:
> >> > The problem is that when I try to authenticate with my AP & W2K, it
> >> doesn't
> >> > work :
> >> >
> >> > # less /var/log/radius.log
> >> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >>
> >> Did I mention I *really* meant that you should read the FAQ and the
> >>README's?
> >>
> >> Alan DeKok.
> >>
> >>-
> >>List info/subscribe/unsubscribe? See
> >>http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
What is your ap?, you set up the eap and wep key, in the cisco 1200 ap this
is import.
att.
Mauricio
- Original Message -
From: "Pascal PELONI" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 03, 2003 9:24 AM
Subject: Re: FreeRadius - DLINK DWL-900+ - 802.1.X
> I forget to say that :
>
> 1. the authentication works well with radtest !
>
> $ radtest tst1 pp 127.0.0.1 1 test
> Sending Access-Request of id 68 to 127.0.0.1:1812
> User-Name = "tst1"
> User-Password =
> "\323\366\273\363\371Z\250]\231(w\265?\346G\253"
> NAS-IP-Address = localhost
> NAS-Port = 1
> rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
>
> 2. with my AP I have the following output in radius.log :
>
> Auth: Login incorrect: [pelo/]
>
> Thanks.
>
> At 16:58 03/06/2003 +0200, you wrote:
> >I've already read the FAQ and the README's, but it still doesn't work.
> >
> >Here is part of my config :
> >
> >radiusd.conf
> >
> >modules {
> > eap {
> > default_eap_type = md5
> > md5 {
> > }
> > }
> >}
> >
> >authorize {
> > eap
> >}
> >
> >authenticate {
> > eap
> >}
> >
> >client.conf
> >---
> >client localhost {
> > secret = test
> > nastype = other
> > shortname = test
> >}
> >
> >huntgroups
> >--
> >TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
> >
> >users
> >-
> >DEFAULT Huntgroup-Name == "TEST"
> > Framed-IP-Address = 192.168.1.11+
> >
> >tst1User-Password == "pp"
> >
> >tst2Auth-Type := Local, User-Password == "pp"
> >
> >Could someone help ?
> >
> >Thanks, PP.
> >
> >
> >
> >At 09:31 30/05/2003 -0400, you wrote:
> >>Pascal PELONI <[EMAIL PROTECTED]> wrote:
> >> > The problem is that when I try to authenticate with my AP & W2K, it
> >> doesn't
> >> > work :
> >> >
> >> > # less /var/log/radius.log
> >> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >> Read the FAQ and the README's.
> >>
> >>
> >> Did I mention I *really* meant that you should read the FAQ and the
> >>README's?
> >>
> >> Alan DeKok.
> >>
> >>-
> >>List info/subscribe/unsubscribe? See
> >>http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
hi Pascal
as Alan already advised you, try to read the EAP/MD5 faq. what you keep
on posting is NOT an error. there CAN'T be any user-password attribute
with EAP/MD5 or CHAP methodes.
thanks,
artur
Pascal PELONI wrote:
>
> My mistake : this is the good extract of the log file :
>
> Auth: Login incorrect: [tst1/]
>
> At 17:24 03/06/2003 +0200, you wrote:
> >I forget to say that :
> >
> >1. the authentication works well with radtest !
> >
> > $ radtest tst1 pp 127.0.0.1 1 test
> > Sending Access-Request of id 68 to 127.0.0.1:1812
> > User-Name = "tst1"
> > User-Password =
> > "\323\366\273\363\371Z\250]\231(w\265?\346G\253"
> > NAS-IP-Address = localhost
> > NAS-Port = 1
> >rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
> >
> >2. with my AP I have the following output in radius.log :
> >
> > Auth: Login incorrect: [pelo/]
> >
> >Thanks.
> >
> >At 16:58 03/06/2003 +0200, you wrote:
> >>I've already read the FAQ and the README's, but it still doesn't work.
> >>
> >>Here is part of my config :
> >>
> >>radiusd.conf
> >>
> >>modules {
> >> eap {
> >> default_eap_type = md5
> >> md5 {
> >> }
> >> }
> >>}
> >>
> >>authorize {
> >> eap
> >>}
> >>
> >>authenticate {
> >> eap
> >>}
> >>
> >>client.conf
> >>---
> >>client localhost {
> >> secret = test
> >> nastype = other
> >> shortname = test
> >>}
> >>
> >>huntgroups
> >>--
> >>TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
> >>
> >>users
> >>-
> >>DEFAULT Huntgroup-Name == "TEST"
> >> Framed-IP-Address = 192.168.1.11+
> >>
> >>tst1User-Password == "pp"
> >>
> >>tst2Auth-Type := Local, User-Password == "pp"
> >>
> >>Could someone help ?
> >>
> >>Thanks, PP.
> >>
> >>
> >>
> >>At 09:31 30/05/2003 -0400, you wrote:
> >>>Pascal PELONI <[EMAIL PROTECTED]> wrote:
> >>> > The problem is that when I try to authenticate with my AP & W2K, it
> >>> doesn't
> >>> > work :
> >>> >
> >>> > # less /var/log/radius.log
> >>> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >>> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
> >>>
> >>> Read the FAQ and the README's.
> >>>
> >>> Read the FAQ and the README's.
> >>>
> >>> Read the FAQ and the README's.
> >>>
> >>> Read the FAQ and the README's.
> >>>
> >>>
> >>> Did I mention I *really* meant that you should read the FAQ and the
> >>>README's?
> >>>
> >>> Alan DeKok.
> >>>
> >>>-
> >>>List info/subscribe/unsubscribe? See
> >>>http://www.freeradius.org/list/users.html
> >
> >
> >- List info/subscribe/unsubscribe? See
> >http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Artur Hecker
artur[at]hecker.info
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
My mistake : this is the good extract of the log file :
Auth: Login incorrect: [tst1/]
At 17:24 03/06/2003 +0200, you wrote:
I forget to say that :
1. the authentication works well with radtest !
$ radtest tst1 pp 127.0.0.1 1 test
Sending Access-Request of id 68 to 127.0.0.1:1812
User-Name = "tst1"
User-Password =
"\323\366\273\363\371Z\250]\231(w\265?\346G\253"
NAS-IP-Address = localhost
NAS-Port = 1
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
2. with my AP I have the following output in radius.log :
Auth: Login incorrect: [pelo/]
Thanks.
At 16:58 03/06/2003 +0200, you wrote:
I've already read the FAQ and the README's, but it still doesn't work.
Here is part of my config :
radiusd.conf
modules {
eap {
default_eap_type = md5
md5 {
}
}
}
authorize {
eap
}
authenticate {
eap
}
client.conf
---
client localhost {
secret = test
nastype = other
shortname = test
}
huntgroups
--
TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
users
-
DEFAULT Huntgroup-Name == "TEST"
Framed-IP-Address = 192.168.1.11+
tst1User-Password == "pp"
tst2Auth-Type := Local, User-Password == "pp"
Could someone help ?
Thanks, PP.
At 09:31 30/05/2003 -0400, you wrote:
Pascal PELONI <[EMAIL PROTECTED]> wrote:
> The problem is that when I try to authenticate with my AP & W2K, it
doesn't
> work :
>
> # less /var/log/radius.log
> Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/
> attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Did I mention I *really* meant that you should read the FAQ and the
README's?
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
I forget to say that :
1. the authentication works well with radtest !
$ radtest tst1 pp 127.0.0.1 1 test
Sending Access-Request of id 68 to 127.0.0.1:1812
User-Name = "tst1"
User-Password =
"\323\366\273\363\371Z\250]\231(w\265?\346G\253"
NAS-IP-Address = localhost
NAS-Port = 1
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20
2. with my AP I have the following output in radius.log :
Auth: Login incorrect: [pelo/]
Thanks.
At 16:58 03/06/2003 +0200, you wrote:
I've already read the FAQ and the README's, but it still doesn't work.
Here is part of my config :
radiusd.conf
modules {
eap {
default_eap_type = md5
md5 {
}
}
}
authorize {
eap
}
authenticate {
eap
}
client.conf
---
client localhost {
secret = test
nastype = other
shortname = test
}
huntgroups
--
TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
users
-
DEFAULT Huntgroup-Name == "TEST"
Framed-IP-Address = 192.168.1.11+
tst1User-Password == "pp"
tst2Auth-Type := Local, User-Password == "pp"
Could someone help ?
Thanks, PP.
At 09:31 30/05/2003 -0400, you wrote:
Pascal PELONI <[EMAIL PROTECTED]> wrote:
> The problem is that when I try to authenticate with my AP & W2K, it
doesn't
> work :
>
> # less /var/log/radius.log
> Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/
> attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Did I mention I *really* meant that you should read the FAQ and the
README's?
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
I've already read the FAQ and the README's, but it still doesn't work.
Here is part of my config :
radiusd.conf
modules {
eap {
default_eap_type = md5
md5 {
}
}
}
authorize {
eap
}
authenticate {
eap
}
client.conf
---
client localhost {
secret = test
nastype = other
shortname = test
}
huntgroups
--
TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3
users
-
DEFAULT Huntgroup-Name == "TEST"
Framed-IP-Address = 192.168.1.11+
tst1User-Password == "pp"
tst2Auth-Type := Local, User-Password == "pp"
Could someone help ?
Thanks, PP.
At 09:31 30/05/2003 -0400, you wrote:
Pascal PELONI <[EMAIL PROTECTED]> wrote:
> The problem is that when I try to authenticate with my AP & W2K, it
doesn't
> work :
>
> # less /var/log/radius.log
> Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/
> attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C)
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Read the FAQ and the README's.
Did I mention I *really* meant that you should read the FAQ and the
README's?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
Pascal PELONI <[EMAIL PROTECTED]> wrote: > The problem is that when I try to authenticate with my AP & W2K, it doesn't > work : > > # less /var/log/radius.log > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Did I mention I *really* meant that you should read the FAQ and the README's? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
FreeRadius - DLINK DWL-900+ - 802.1.X
Hello all, got a small problem with 802.1X authentication. Here is my config : - RedHat 7.3 - FreeRADIUS Version 0.8.1 - DLINK DWL-900+ Firmware v2.52 4x - W2K Client with 802.1X auth http://www.microsoft.com/windows2000/server/evaluation/news/bulletins/8021xclient.asp Radius config seems to be ok : # echo "User-Name = aa, User-Password = pp" | radclient 192.168.1.2 auth test # less /var/log/radius.log Fri May 30 10:39:30 2003 : Auth: Login OK: [aa/pp] (from client test port 0) The problem is that when I try to authenticate with my AP & W2K, it doesn't work : # less /var/log/radius.log Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) This field seems strange ? Could you pelase help ? Thanks, PP. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
