Re: FreeRadius - DLINK DWL-900+ - 802.1.X
At 08:56 04/06/2003 -0600, you wrote: What is your ap? DLINK DWL-900+ , you set up the eap and wep key, Yes, I did. regards. in the cisco 1200 ap this is import. att. Mauricio - Original Message - From: "Pascal PELONI" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 9:24 AM Subject: Re: FreeRadius - DLINK DWL-900+ - 802.1.X > I forget to say that : > > 1. the authentication works well with radtest ! > > $ radtest tst1 pp 127.0.0.1 1 test > Sending Access-Request of id 68 to 127.0.0.1:1812 > User-Name = "tst1" > User-Password = > "\323\366\273\363\371Z\250]\231(w\265?\346G\253" > NAS-IP-Address = localhost > NAS-Port = 1 > rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20 > > 2. with my AP I have the following output in radius.log : > > Auth: Login incorrect: [pelo/] > > Thanks. > > At 16:58 03/06/2003 +0200, you wrote: > >I've already read the FAQ and the README's, but it still doesn't work. > > > >Here is part of my config : > > > >radiusd.conf > > > >modules { > > eap { > > default_eap_type = md5 > > md5 { > > } > > } > >} > > > >authorize { > > eap > >} > > > >authenticate { > > eap > >} > > > >client.conf > >--- > >client localhost { > > secret = test > > nastype = other > > shortname = test > >} > > > >huntgroups > >-- > >TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 > > > >users > >- > >DEFAULT Huntgroup-Name == "TEST" > > Framed-IP-Address = 192.168.1.11+ > > > >tst1User-Password == "pp" > > > >tst2Auth-Type := Local, User-Password == "pp" > > > >Could someone help ? > > > >Thanks, PP. > > > > > > > >At 09:31 30/05/2003 -0400, you wrote: > >>Pascal PELONI <[EMAIL PROTECTED]> wrote: > >> > The problem is that when I try to authenticate with my AP & W2K, it > >> doesn't > >> > work : > >> > > >> > # less /var/log/radius.log > >> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> > >> Did I mention I *really* meant that you should read the FAQ and the > >>README's? > >> > >> Alan DeKok. > >> > >>- > >>List info/subscribe/unsubscribe? See > >>http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
What is your ap?, you set up the eap and wep key, in the cisco 1200 ap this is import. att. Mauricio - Original Message - From: "Pascal PELONI" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 9:24 AM Subject: Re: FreeRadius - DLINK DWL-900+ - 802.1.X > I forget to say that : > > 1. the authentication works well with radtest ! > > $ radtest tst1 pp 127.0.0.1 1 test > Sending Access-Request of id 68 to 127.0.0.1:1812 > User-Name = "tst1" > User-Password = > "\323\366\273\363\371Z\250]\231(w\265?\346G\253" > NAS-IP-Address = localhost > NAS-Port = 1 > rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20 > > 2. with my AP I have the following output in radius.log : > > Auth: Login incorrect: [pelo/] > > Thanks. > > At 16:58 03/06/2003 +0200, you wrote: > >I've already read the FAQ and the README's, but it still doesn't work. > > > >Here is part of my config : > > > >radiusd.conf > > > >modules { > > eap { > > default_eap_type = md5 > > md5 { > > } > > } > >} > > > >authorize { > > eap > >} > > > >authenticate { > > eap > >} > > > >client.conf > >--- > >client localhost { > > secret = test > > nastype = other > > shortname = test > >} > > > >huntgroups > >-- > >TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 > > > >users > >- > >DEFAULT Huntgroup-Name == "TEST" > > Framed-IP-Address = 192.168.1.11+ > > > >tst1User-Password == "pp" > > > >tst2Auth-Type := Local, User-Password == "pp" > > > >Could someone help ? > > > >Thanks, PP. > > > > > > > >At 09:31 30/05/2003 -0400, you wrote: > >>Pascal PELONI <[EMAIL PROTECTED]> wrote: > >> > The problem is that when I try to authenticate with my AP & W2K, it > >> doesn't > >> > work : > >> > > >> > # less /var/log/radius.log > >> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> Read the FAQ and the README's. > >> > >> > >> Did I mention I *really* meant that you should read the FAQ and the > >>README's? > >> > >> Alan DeKok. > >> > >>- > >>List info/subscribe/unsubscribe? See > >>http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
hi Pascal as Alan already advised you, try to read the EAP/MD5 faq. what you keep on posting is NOT an error. there CAN'T be any user-password attribute with EAP/MD5 or CHAP methodes. thanks, artur Pascal PELONI wrote: > > My mistake : this is the good extract of the log file : > > Auth: Login incorrect: [tst1/] > > At 17:24 03/06/2003 +0200, you wrote: > >I forget to say that : > > > >1. the authentication works well with radtest ! > > > > $ radtest tst1 pp 127.0.0.1 1 test > > Sending Access-Request of id 68 to 127.0.0.1:1812 > > User-Name = "tst1" > > User-Password = > > "\323\366\273\363\371Z\250]\231(w\265?\346G\253" > > NAS-IP-Address = localhost > > NAS-Port = 1 > >rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20 > > > >2. with my AP I have the following output in radius.log : > > > > Auth: Login incorrect: [pelo/] > > > >Thanks. > > > >At 16:58 03/06/2003 +0200, you wrote: > >>I've already read the FAQ and the README's, but it still doesn't work. > >> > >>Here is part of my config : > >> > >>radiusd.conf > >> > >>modules { > >> eap { > >> default_eap_type = md5 > >> md5 { > >> } > >> } > >>} > >> > >>authorize { > >> eap > >>} > >> > >>authenticate { > >> eap > >>} > >> > >>client.conf > >>--- > >>client localhost { > >> secret = test > >> nastype = other > >> shortname = test > >>} > >> > >>huntgroups > >>-- > >>TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 > >> > >>users > >>- > >>DEFAULT Huntgroup-Name == "TEST" > >> Framed-IP-Address = 192.168.1.11+ > >> > >>tst1User-Password == "pp" > >> > >>tst2Auth-Type := Local, User-Password == "pp" > >> > >>Could someone help ? > >> > >>Thanks, PP. > >> > >> > >> > >>At 09:31 30/05/2003 -0400, you wrote: > >>>Pascal PELONI <[EMAIL PROTECTED]> wrote: > >>> > The problem is that when I try to authenticate with my AP & W2K, it > >>> doesn't > >>> > work : > >>> > > >>> > # less /var/log/radius.log > >>> > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ >>> > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) > >>> > >>> Read the FAQ and the README's. > >>> > >>> Read the FAQ and the README's. > >>> > >>> Read the FAQ and the README's. > >>> > >>> Read the FAQ and the README's. > >>> > >>> > >>> Did I mention I *really* meant that you should read the FAQ and the > >>>README's? > >>> > >>> Alan DeKok. > >>> > >>>- > >>>List info/subscribe/unsubscribe? See > >>>http://www.freeradius.org/list/users.html > > > > > >- List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Artur Hecker artur[at]hecker.info - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
My mistake : this is the good extract of the log file : Auth: Login incorrect: [tst1/] At 17:24 03/06/2003 +0200, you wrote: I forget to say that : 1. the authentication works well with radtest ! $ radtest tst1 pp 127.0.0.1 1 test Sending Access-Request of id 68 to 127.0.0.1:1812 User-Name = "tst1" User-Password = "\323\366\273\363\371Z\250]\231(w\265?\346G\253" NAS-IP-Address = localhost NAS-Port = 1 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20 2. with my AP I have the following output in radius.log : Auth: Login incorrect: [pelo/] Thanks. At 16:58 03/06/2003 +0200, you wrote: I've already read the FAQ and the README's, but it still doesn't work. Here is part of my config : radiusd.conf modules { eap { default_eap_type = md5 md5 { } } } authorize { eap } authenticate { eap } client.conf --- client localhost { secret = test nastype = other shortname = test } huntgroups -- TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 users - DEFAULT Huntgroup-Name == "TEST" Framed-IP-Address = 192.168.1.11+ tst1User-Password == "pp" tst2Auth-Type := Local, User-Password == "pp" Could someone help ? Thanks, PP. At 09:31 30/05/2003 -0400, you wrote: Pascal PELONI <[EMAIL PROTECTED]> wrote: > The problem is that when I try to authenticate with my AP & W2K, it doesn't > work : > > # less /var/log/radius.log > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Did I mention I *really* meant that you should read the FAQ and the README's? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
I forget to say that : 1. the authentication works well with radtest ! $ radtest tst1 pp 127.0.0.1 1 test Sending Access-Request of id 68 to 127.0.0.1:1812 User-Name = "tst1" User-Password = "\323\366\273\363\371Z\250]\231(w\265?\346G\253" NAS-IP-Address = localhost NAS-Port = 1 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=68, length=20 2. with my AP I have the following output in radius.log : Auth: Login incorrect: [pelo/] Thanks. At 16:58 03/06/2003 +0200, you wrote: I've already read the FAQ and the README's, but it still doesn't work. Here is part of my config : radiusd.conf modules { eap { default_eap_type = md5 md5 { } } } authorize { eap } authenticate { eap } client.conf --- client localhost { secret = test nastype = other shortname = test } huntgroups -- TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 users - DEFAULT Huntgroup-Name == "TEST" Framed-IP-Address = 192.168.1.11+ tst1User-Password == "pp" tst2Auth-Type := Local, User-Password == "pp" Could someone help ? Thanks, PP. At 09:31 30/05/2003 -0400, you wrote: Pascal PELONI <[EMAIL PROTECTED]> wrote: > The problem is that when I try to authenticate with my AP & W2K, it doesn't > work : > > # less /var/log/radius.log > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Did I mention I *really* meant that you should read the FAQ and the README's? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
I've already read the FAQ and the README's, but it still doesn't work. Here is part of my config : radiusd.conf modules { eap { default_eap_type = md5 md5 { } } } authorize { eap } authenticate { eap } client.conf --- client localhost { secret = test nastype = other shortname = test } huntgroups -- TESTNAS-IP-Address == 127.0.0.1, NAS-Port-Id == 0-3 users - DEFAULT Huntgroup-Name == "TEST" Framed-IP-Address = 192.168.1.11+ tst1User-Password == "pp" tst2Auth-Type := Local, User-Password == "pp" Could someone help ? Thanks, PP. At 09:31 30/05/2003 -0400, you wrote: Pascal PELONI <[EMAIL PROTECTED]> wrote: > The problem is that when I try to authenticate with my AP & W2K, it doesn't > work : > > # less /var/log/radius.log > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ > attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Did I mention I *really* meant that you should read the FAQ and the README's? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: FreeRadius - DLINK DWL-900+ - 802.1.X
Pascal PELONI <[EMAIL PROTECTED]> wrote: > The problem is that when I try to authenticate with my AP & W2K, it doesn't > work : > > # less /var/log/radius.log > Thu May 29 18:17:07 2003 : Auth: Login incorrect: [aa/ attribute>] (from client ap-wlan port 0 cli 00-40-05-CB-AD-7C) Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Read the FAQ and the README's. Did I mention I *really* meant that you should read the FAQ and the README's? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html