freeradius conf.
Dear Recently I have installed freeradius ,i have some problem in password auth. i have created new user:pra with pass:123456 when i tried to test the auth. enabling Debug mod using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 == Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
freeradius conf.
Dear Recently I have installed freeradius ,i have some problem in password auth. i have created new user:pradeep with pass:123456 when i tried to test the auth. enabling Debug mod using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 == Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
freeradius conf.
Dear i haven't solved my problem please help me out.. pradeep.. Dear Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i have some problem in password auth. i have created new user:pradeep with pass:123456 when i tried to test the auth. enabling Debug mod. using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 == Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
rad_check_password: Found Auth-Type System rlm_unix: [pradeep]: invalid password You are configured for Unix password validatation and the password you gave is not the one the system has for that user id. On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: Dear i haven't solved my problem please help me out.. pradeep.. Dear Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i have some problem in password auth. i have created new user:pradeep with pass:123456 when i tried to test the auth. enabling Debug mod. using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 == Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
dear please help me out where i have to make change & in wich conf. fils pradeep.. -Original Message- From: Doug Hardie <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Wed, 2 Mar 2005 23:12:29 -0800 Subject: Re: freeradius conf. > > rad_check_password: Found Auth-Type System > > rlm_unix: [pradeep]: invalid password > > You are configured for Unix password validatation and the password you > gave is not the one the system has for that user id. > > > On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: > > > Dear i haven't solved my problem please help me out.. > > > > pradeep.. > > > > > > > > Dear > > > > Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i > > have > > some problem in password auth. > > i have created new user:pradeep with pass:123456 > > > > when i tried to test the auth. enabling Debug mod. > > using command > radtest pradeep 123456 localhost:1812 0 testing123 > > > > it generate following massage : > > > > > > rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, > > length=59 > > User-Name = "pradeep" > > User-Password = "123456" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 0 > > modcall: entering group authorize for request 1 > > modcall[authorize]: module "preprocess" returns ok for request 1 > > modcall[authorize]: module "chap" returns noop for request 1 > > modcall[authorize]: module "eap" returns noop for request 1 > > rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 1 > > users: Matched DEFAULT at 152 > > modcall[authorize]: module "files" returns ok for request 1 > > modcall[authorize]: module "mschap" returns noop for request 1 > > modcall: group authorize returns ok for request 1 > > rad_check_password: Found Auth-Type System > > auth: type "System" > > modcall: entering group authenticate for request 1 > > rlm_unix: [pradeep]: invalid password > > modcall[authenticate]: module "unix" returns reject for request 1 > > modcall: group authenticate returns reject for request 1 > > auth: Failed to validate the user. > > Delaying request 1 for 1 seconds > > Finished request 1 > > > == > > > > > > Please help me where i have made mistake in conf. > > > > Regards > > Pradeep.. > > > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
dear please help me out where i have to make change & in which conf. files pradeep.. -Original Message- From: Doug Hardie <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Wed, 2 Mar 2005 23:12:29 -0800 Subject: Re: freeradius conf. > > rad_check_password: Found Auth-Type System > > rlm_unix: [pradeep]: invalid password > > You are configured for Unix password validatation and the password you > gave is not the one the system has for that user id. > > > On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: > > > Dear i haven't solved my problem please help me out.. > > > > pradeep.. > > > > > > > > Dear > > > > Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i > > have > > some problem in password auth. > > i have created new user:pradeep with pass:123456 > > > > when i tried to test the auth. enabling Debug mod. > > using command > radtest pradeep 123456 localhost:1812 0 testing123 > > > > it generate following massage : > > > > > > rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, > > length=59 > > User-Name = "pradeep" > > User-Password = "123456" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 0 > > modcall: entering group authorize for request 1 > > modcall[authorize]: module "preprocess" returns ok for request 1 > > modcall[authorize]: module "chap" returns noop for request 1 > > modcall[authorize]: module "eap" returns noop for request 1 > > rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL > > rlm_realm: No such realm "NULL" > > modcall[authorize]: module "suffix" returns noop for request 1 > > users: Matched DEFAULT at 152 > > modcall[authorize]: module "files" returns ok for request 1 > > modcall[authorize]: module "mschap" returns noop for request 1 > > modcall: group authorize returns ok for request 1 > > rad_check_password: Found Auth-Type System > > auth: type "System" > > modcall: entering group authenticate for request 1 > > rlm_unix: [pradeep]: invalid password > > modcall[authenticate]: module "unix" returns reject for request 1 > > modcall: group authenticate returns reject for request 1 > > auth: Failed to validate the user. > > Delaying request 1 for 1 seconds > > Finished request 1 > > > == > > > > > > Please help me where i have made mistake in conf. > > > > Regards > > Pradeep.. > > > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
Hello, Check out Stefan's solution for this :: its working for me. > modcall[authorize]: module "files" returns ok for request 0 > modcall: group authorize returns ok for request 0 > rad_check_password: Found Auth-Type System > auth: type "System" Stefan Winter : how about omitting Auth-Type := System? The files section already properly authorized your user, but the later checks with Auth-Type System led to the failure. Bye Murali. Pradeep Nevatia wrote: dear please help me out where i have to make change & in wich conf. fils pradeep.. -Original Message- From: Doug Hardie <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Wed, 2 Mar 2005 23:12:29 -0800 Subject: Re: freeradius conf. rad_check_password: Found Auth-Type System rlm_unix: [pradeep]: invalid password You are configured for Unix password validatation and the password you gave is not the one the system has for that user id. On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: Dear i haven't solved my problem please help me out.. pradeep.. Dear Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i have some problem in password auth. i have created new user:pradeep with pass:123456 when i tried to test the auth. enabling Debug mod. using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 == Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
hello can you explain me in detail...where to make change.. Thanks -Original Message- From: Murali Krishna G <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Fri, 04 Mar 2005 12:24:47 +0530 Subject: Re: freeradius conf. > Hello, > > Check out Stefan's solution for this :: its working for me. > > >> modcall[authorize]: module "files" returns ok for request 0 > >> modcall: group authorize returns ok for request 0 > >> rad_check_password: Found Auth-Type System > >> auth: type "System" > > > > > > Stefan Winter : > > how about omitting Auth-Type := System? The files section already > properly > authorized your user, but the later checks with Auth-Type System led to > the > failure. > > > Bye > Murali. > > > > Pradeep Nevatia wrote: > > >dear please help me out where i have to make change & in wich conf. > fils > > > >pradeep.. > > > >-Original Message- > >From: Doug Hardie <[EMAIL PROTECTED]> > >To: freeradius-users@lists.freeradius.org > >Date: Wed, 2 Mar 2005 23:12:29 -0800 > >Subject: Re: freeradius conf. > > > > > > > >>> rad_check_password: Found Auth-Type System > >>>rlm_unix: [pradeep]: invalid password > >>> > >>> > >>You are configured for Unix password validatation and the password > you > >>gave is not the one the system has for that user id. > >> > >> > >>On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: > >> > >> > >> > >>>Dear i haven't solved my problem please help me out.. > >>> > >>>pradeep.. > >>> > >>> > >>> > >>>Dear > >>> > >>>Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i > >>>have > >>>some problem in password auth. > >>>i have created new user:pradeep with pass:123456 > >>> > >>>when i tried to test the auth. enabling Debug mod. > >>>using command > radtest pradeep 123456 localhost:1812 0 testing123 > >>> > >>>it generate following massage : > >>> > >>> > >>>rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, > >>>length=59 > >>>User-Name = "pradeep" > >>>User-Password = "123456" > >>>NAS-IP-Address = 255.255.255.255 > >>>NAS-Port = 0 > >>>modcall: entering group authorize for request 1 > >>> modcall[authorize]: module "preprocess" returns ok for request 1 > >>> modcall[authorize]: module "chap" returns noop for request 1 > >>> modcall[authorize]: module "eap" returns noop for request 1 > >>>rlm_realm: No '@' in User-Name = "pradeep", looking up realm > NULL > >>>rlm_realm: No such realm "NULL" > >>> modcall[authorize]: module "suffix" returns noop for request 1 > >>>users: Matched DEFAULT at 152 > >>> modcall[authorize]: module "files" returns ok for request 1 > >>> modcall[authorize]: module "mschap" returns noop for request 1 > >>>modcall: group authorize returns ok for request 1 > >>> rad_check_password: Found Auth-Type System > >>>auth: type "System" > >>>modcall: entering group authenticate for request 1 > >>>rlm_unix: [pradeep]: invalid password > >>> modcall[authenticate]: module "unix" returns reject for request 1 > >>>modcall: group authenticate returns reject for request 1 > >>>auth: Failed to validate the user. > >>>Delaying request 1 for 1 seconds > >>>Finished request 1 > >>> > >>> > >>> > >>= > = > >> > >> > >>>Please help me where i have made mistake in conf. > >>> > >>>Regards > >>>Pradeep.. > >>> > >>> > >>>- > >>>List info/subscribe/unsubscribe? See > >>>http://www.freeradius.org/list/users.html > >>> > >>> > >>> > >>- > >>List info/subscribe/unsubscribe? See > >>http://www.freeradius.org/list/users.html > >> > >> > > > > > >- > >List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Re: freeradius conf.
I assume you are using user file. the simple entry should resemble like this: murali Auth-Type := System, User-Password == "murali" Reply-Message = "Hello, Murali you are Authenticated! Go ahead!!", Service-Type = Login-User, Login-Service = Telnet, Login-IP-Host = 127.0.0.1, Login-TCP-Port <= 65536 Try removing Auth-Type and proceed, it should work In case you are searching for the credentials from the system, i.e., /etc/passwd file or shadow make sure that you have uncommented the respective entries for your client entry Ex : client 127.0.0.1 { . . . passwd = /etc/passwd } Hope you should able to cross your hurdle now ... Otherwise some one else should help us Bye Murali. Pradeep Nevatia wrote: hello can you explain me in detail...where to make change.. Thanks -Original Message- From: Murali Krishna G <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Fri, 04 Mar 2005 12:24:47 +0530 Subject: Re: freeradius conf. Hello, Check out Stefan's solution for this :: its working for me. modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type System auth: type "System" Stefan Winter : how about omitting Auth-Type := System? The files section already properly authorized your user, but the later checks with Auth-Type System led to the failure. Bye Murali. Pradeep Nevatia wrote: dear please help me out where i have to make change & in wich conf. fils pradeep.. -Original Message- From: Doug Hardie <[EMAIL PROTECTED]> To: freeradius-users@lists.freeradius.org Date: Wed, 2 Mar 2005 23:12:29 -0800 Subject: Re: freeradius conf. rad_check_password: Found Auth-Type System rlm_unix: [pradeep]: invalid password You are configured for Unix password validatation and the password you gave is not the one the system has for that user id. On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote: Dear i haven't solved my problem please help me out.. pradeep.. Dear Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i have some problem in password auth. i have created new user:pradeep with pass:123456 when i tried to test the auth. enabling Debug mod. using command > radtest pradeep 123456 localhost:1812 0 testing123 it generate following massage : rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176, length=59 User-Name = "pradeep" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "eap" returns noop for request 1 rlm_realm: No '@' in User-Name = "pradeep", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 users: Matched DEFAULT at 152 modcall[authorize]: module "files" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 modcall: group authorize returns ok for request 1 rad_check_password: Found Auth-Type System auth: type "System" modcall: entering group authenticate for request 1 rlm_unix: [pradeep]: invalid password modcall[authenticate]: module "unix" returns reject for request 1 modcall: group authenticate returns reject for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 = = Please help me where i have made mistake in conf. Regards Pradeep.. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html