Re: [Freeswitch-users] unable to configure Digium TDM400P
On Wed, Oct 7, 2009 at 10:45 PM, Woody Dickson woodydick...@gmail.comwrote: Hi Michael Is the ztcfg output supposed to say something like 2 channels configured? Yes. If you had the signaling incorrect it would complain. I have not set up openzap yet because I don't know if the openzap.config is good or not. You need to make sure that zaptel is set up first. Running ztcfg and getting no errors or warnings, plus a message that says 2 channels configured is a pretty good sign that you can move on to the OpenZAP stuff. Can you give me any suggestion if the ztcfg output I am getting is proper or not? No obvious problems, so move on to the OpenZAP configs. -MC thx, woody -MC On Wed, Oct 7, 2009 at 3:40 AM, Woody Dickson woodydick...@gmail.comwrote: Hi, I am trying to setup a Digium TDM400P following the instruction on the wiki. It is a 1 fxo and 1 fxs card, so I tried loadzone=in defaultzone=in fxsks=2 fxoks=1 and loadzone=in defaultzone=in fxsks=1 fxoks=2 None works. Does anyone know how it should be configured? Here is what I get by following the wiki. [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart [r...@localhost zaptel]# lspci 00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
[Freeswitch-users] unable to configure Digium TDM400P
Hi, I am trying to setup a Digium TDM400P following the instruction on the wiki. It is a 1 fxo and 1 fxs card, so I tried loadzone=in defaultzone=in fxsks=2 fxoks=1 and loadzone=in defaultzone=in fxsks=1 fxoks=2 None works. Does anyone know how it should be configured? Here is what I get by following the wiki. [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart [r...@localhost zaptel]# lspci 00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Re: [Freeswitch-users] unable to configure Digium TDM400P
The ztcfg seems okay since it set the signaling to kewlstart. What part is not working? Be sure to pastebin your openzap.conf and openzap.conf.xml files as well as a full debug of what happens when loading mod_openzap. -MC On Wed, Oct 7, 2009 at 3:40 AM, Woody Dickson woodydick...@gmail.comwrote: Hi, I am trying to setup a Digium TDM400P following the instruction on the wiki. It is a 1 fxo and 1 fxs card, so I tried loadzone=in defaultzone=in fxsks=2 fxoks=1 and loadzone=in defaultzone=in fxsks=1 fxoks=2 None works. Does anyone know how it should be configured? Here is what I get by following the wiki. [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart [r...@localhost zaptel]# lspci 00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Re: [Freeswitch-users] unable to configure Digium TDM400P
Hi Michael Is the ztcfg output supposed to say something like 2 channels configured? I have not set up openzap yet because I don't know if the openzap.config is good or not. Can you give me any suggestion if the ztcfg output I am getting is proper or not? thx, woody -MC On Wed, Oct 7, 2009 at 3:40 AM, Woody Dickson woodydick...@gmail.comwrote: Hi, I am trying to setup a Digium TDM400P following the instruction on the wiki. It is a 1 fxo and 1 fxs card, so I tried loadzone=in defaultzone=in fxsks=2 fxoks=1 and loadzone=in defaultzone=in fxsks=1 fxoks=2 None works. Does anyone know how it should be configured? Here is what I get by following the wiki. [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart [r...@localhost zaptel]# lspci 00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ___ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org