Re: [Freevo-users] Dumb Question
you are activating the plugins two times.. for example , when you start freevo it loads plugins automatically if you don't want them you have to unload them in your local.conf.py , if you try to load them , you'll get that error , comment all the ones it lists that there are duplicates , out from your local_conf.py by putting a # in front of the plugin.activate line for each one.. - Original Message - From: "Mike LeVan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, January 18, 2004 2:04 PM Subject: [Freevo-users] Dumb Question Hi all, I have been trying to get this going for some time, and I picked it up again this weekend. I did a fresh install of 1.4.1 . I had been using 1.3. Here are a couple of questions I hope you can help me with. 1) I get an error with my local_conf.py file. I get an error that will not allow freevo to run, even if all I do is copy the file. Here is the error: WARNING: duplicate plugin activation, ignoring: WARNING: duplicate plugin activation, ignoring: *Snip -- Many more* WARNING: duplicate plugin activation, ignoring: Error: your local_config.py file has no version information Please check freevo_config.py for changes and set CONFIG_VERSION in ./local_conf.py to 3.91 === What to do here? The version number is obviously in the file. 2) Is there a way to adjust the brightness, color, hue, etc. of the picture. I am trying to use Mplayer for my viewing pleasure. Thanks a lot, Mike --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] F2/Power button
I believe it used to be mapped to the shutdown function in freevo , however , I've noticed it now does nothing for me too ;) - Original Message - From: "Frederik" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 15, 2004 8:34 AM Subject: [Freevo-users] F2/Power button > Hi! > > I just resend my questions as nobody replied! Is my question so stupid or > does nobody knows the answer! > > Can anyone explain to me what the Button "F2 - Power" Button which is > > mentioned in the help is doing? > > On my box not much is happening! > > Cheers > > Frederik > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] nfs mount
A hard nfs mount will cause any program trying to access it to hang untill it is restored , if the nfs share is mounted with the soft option , you will be fine =) --Josh - Original Message - From: "Richard van Paasen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 14, 2004 7:08 PM Subject: Re: [Freevo-users] nfs mount > On Thu, 2004-01-15 at 00:52, Matthew Bettencourt wrote: > > autofs will help in this. autofs will time out and the dir will be > > empty. Since it unmounts when the dir is idle it will fix your problem, > > although you will have a delay when going to that dir > > Matt > > What happens if freevo is playing a song and the fileserver goes down? > > > Richard van Paasen wrote: > > > I have my music directory mounted via nfs from a fileserver to my freevo > > > box. However, the fileserver is not always on thus freevo hangs when it > > > accesses the music directory when the fileserver is offline. > > > > > > Is there a way to prevent freevo from hanging? Maybe samba? > > > > > > Richard > > > > > > > > > > > > --- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > ___ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > > > > --- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
When I got home from work I tried to use Freevo thinking that maybe it just didn't like the web front haha.. It recorded video but there was no sound present and the video was in slow motion. For some reason the video had recorded all crazy.. Is there anyway to speed it up??? Oh and how about sound , why did it not record sound? - Original Message - From: "Matthieu Weber" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 15, 2004 3:17 AM Subject: Re: [Freevo-users] recording.. On Wed 14.01.2004 at 12:03:01PM -0500, bikr wrote: > If I put input 1 it's blue screen , input 0 is green with static up top , > which for my Ati TV-Wonder VE is the no signal screen , does yours go green > with static for both 0 and 1?? and blue if no signal on 2?? I tried yesterday evening an ATI 3D Rage II+ card (that's the name of the processor, anyway), and got the same results. The Gatos drivers seem unstable and not work properly when using XVideo as video output driver with TV (but it works fine when watching a DivX...) x11 works fine, though (but eats a lot of CPU time). Matthieu, fighting to find *the* right display adapter for an RGB-SCART connector -- (~._.~)Matthieu Weber - Université de Jyväskylä (~._.~) ( ? )email : [EMAIL PROTECTED] ( ? ) ()- -() public key id : 452AE0AD ()- -() (_)-(_) "Humor ist, wenn man trotzdem lacht (Germain Muller)" (_)-(_) --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] LIRC to stop screensaver--how?
You could just map a button on your remote to the escape key , when you hit that button it'll hit escape , you could also set it up to do keystroke combo to kick off a small macro that moves the mouse etc.. There's tons of ways to do it if you can get lirc working ;) - Original Message - From: "Victor Putz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 14, 2004 1:03 PM Subject: [Freevo-users] LIRC to stop screensaver--how? > All is reasonably well with my weak spare-parts Freevo (go go gadget > Celeron overclocked to 450 MHz, just burning up the sky...). > > Except for a couple of things. The most irritating is that I'm running > Freevo through SDL/X11, which is fine except that XScreensaver keeps > kicking in. Now I could just disable the screensaver, but what I'd really > like is to have my remote (via LIRC) kick off the screensaver whenever I > press a button. > > Any way to do this? > > -->VPutz > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
If I put input 1 it's blue screen , input 0 is green with static up top , which for my Ati TV-Wonder VE is the no signal screen , does yours go green with static for both 0 and 1?? and blue if no signal on 2?? - Original Message - From: "Dave Smylie" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 11:41 PM Subject: RE: [Freevo-users] recording.. > Well, I can't say what input to use for you card, but for mine > > input=0 for tuner > input=1 unusued > input=2 for composite (what I actually use) > > If I don't include input=2, I just get a green screen like yours. > > You might also want to have a look at the output from your mencoder > command - some of the info at the start might help you find the problem. > > > Dave Smylie > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > Sent: Wednesday, 14 January 2004 1:40 p.m. > To: [EMAIL PROTECTED] > Subject: Re: [Freevo-users] recording.. > > I also just tried with input 1 instead of 0 input 1 gives me blue > screen , > as it appears to be the rca in on the card. . 0 I'm sure is probably the > correct one , but for some reason , it's not getting the signal from the > card , could it be tuning in to the wrong frequency for the channels? I > tried a few channels and none of them seem to work .. --Josh > > > > - Original Message - > From: "Bikr" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 7:23 PM > Subject: Re: [Freevo-users] recording.. > > > > It starts recording ok and i'm using input as /dev/video0 if i set > it to > > video1 or any other video* that is in /dev , it doesnt' do anything at > all > > just doesn't run , video0 runs but it is all static that is recording. > When > > I watch tv @ the box though with freevo , i get a picture.. my > command > line > > is this.. > > > > > > bash-2.05b# /usr/bin/mencoder -tv > > > :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:hei > gh > > > t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:fo > rcea > > udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts > > vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts > > br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o > > /media/tv/0-13_11:30_Real_TV_-_.avi tv:// > > > > > > > > > > > > > > > > - Original Message - > > From: "Dave Smylie" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, January 13, 2004 6:49 PM > > Subject: RE: [Freevo-users] recording.. > > > > > > > Have a look at the command line freevo is using to kick off the > > > recording. Sounds like you're not specifying :input=# or something > > > similar on your command line. If you're using mencoder to record, > its > > > completely separate from freevo - ie, freevo shouldn't need to be > > > running. > > > > > > What I found easiest, was to take freevo's command line, and play > with > > > it until it recorded fine, then take those changes and make them to > > > VCR_CMD in local_config.py > > > > > > Cheers > > > Dave Smylie > > > > > > -Original Message- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > > > Sent: Wednesday, 14 January 2004 7:56 a.m. > > > To: [EMAIL PROTECTED] > > > Subject: Re: [Freevo-users] recording.. > > > Importance: High > > > > > > Ok , Now , new problem , recordings are starting , and when I grab > the > > > .avi > > > files , they are just static and the green screen that my video > always > > > shows > > > when there is no signal to it , however , there should be good > signal , > > > does > > > freevo need to be running , the front end I mean , for it to record > > > actual > > > video , or did I maybe miss a step? > > > > > > > > > - Original Message - > > > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, January 13, 2004 1:17 PM > > > Subject: Re: [Freevo-users] recording.. > > > > > > > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > > > > > If I formed that command propery then it looks like the error is > > > telli
Re: [Freevo-users] recording..
I also just tried with input 1 instead of 0 input 1 gives me blue screen , as it appears to be the rca in on the card. . 0 I'm sure is probably the correct one , but for some reason , it's not getting the signal from the card , could it be tuning in to the wrong frequency for the channels? I tried a few channels and none of them seem to work .. --Josh - Original Message ----- From: "Bikr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 7:23 PM Subject: Re: [Freevo-users] recording.. > It starts recording ok and i'm using input as /dev/video0 if i set it to > video1 or any other video* that is in /dev , it doesnt' do anything at all > just doesn't run , video0 runs but it is all static that is recording. When > I watch tv @ the box though with freevo , i get a picture.. my command line > is this.. > > > bash-2.05b# /usr/bin/mencoder -tv > :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh > t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea > udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts > vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts > br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o > /media/tv/0-13_11:30_Real_TV_-_.avi tv:// > > > > > > > > - Original Message - > From: "Dave Smylie" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 6:49 PM > Subject: RE: [Freevo-users] recording.. > > > > Have a look at the command line freevo is using to kick off the > > recording. Sounds like you're not specifying :input=# or something > > similar on your command line. If you're using mencoder to record, its > > completely separate from freevo - ie, freevo shouldn't need to be > > running. > > > > What I found easiest, was to take freevo's command line, and play with > > it until it recorded fine, then take those changes and make them to > > VCR_CMD in local_config.py > > > > Cheers > > Dave Smylie > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > > Sent: Wednesday, 14 January 2004 7:56 a.m. > > To: [EMAIL PROTECTED] > > Subject: Re: [Freevo-users] recording.. > > Importance: High > > > > Ok , Now , new problem , recordings are starting , and when I grab the > > .avi > > files , they are just static and the green screen that my video always > > shows > > when there is no signal to it , however , there should be good signal , > > does > > freevo need to be running , the front end I mean , for it to record > > actual > > video , or did I maybe miss a step? > > > > > > - Original Message - > > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, January 13, 2004 1:17 PM > > Subject: Re: [Freevo-users] recording.. > > > > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > > > If I formed that command propery then it looks like the error is > > telling > > me > > > > that I don't have mplayer configured properly , ie;; codecs.conf > > isn't > > there > > > > and frameno.avi and mencoder etc.. any suggestions how to fix??? > > Below > > is > > > > the results of the command.. =\ > > > > > > Ignore that stuff. It's informative, nothing more. > > > > > > This is the important line: > > > > > > > -tv on is deprecated, use tv:// instead > > > > Exiting... (error parsing cmdline) > > > > > > I had the same problem. Change the options line after -tv. Take out > > the > > > 'on:'. Then, at then end of your command line, enter a tv://. That > > > should clear it up. > > > > > > ---Patrick M [EMAIL PROTECTED]:3784715-- > > > "You know, this is how the sum total of human knowledge is increased. > > > Not with idle speculation and meaningless chatter, but with a > > > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > > > > > > > --- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > &
Re: [Freevo-users] recording..
It starts recording ok and i'm using input as /dev/video0 if i set it to video1 or any other video* that is in /dev , it doesnt' do anything at all just doesn't run , video0 runs but it is all static that is recording. When I watch tv @ the box though with freevo , i get a picture.. my command line is this.. bash-2.05b# /usr/bin/mencoder -tv :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/0-13_11:30_Real_TV_-_.avi tv:// - Original Message - From: "Dave Smylie" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 6:49 PM Subject: RE: [Freevo-users] recording.. > Have a look at the command line freevo is using to kick off the > recording. Sounds like you're not specifying :input=# or something > similar on your command line. If you're using mencoder to record, its > completely separate from freevo - ie, freevo shouldn't need to be > running. > > What I found easiest, was to take freevo's command line, and play with > it until it recorded fine, then take those changes and make them to > VCR_CMD in local_config.py > > Cheers > Dave Smylie > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > Sent: Wednesday, 14 January 2004 7:56 a.m. > To: [EMAIL PROTECTED] > Subject: Re: [Freevo-users] recording.. > Importance: High > > Ok , Now , new problem , recordings are starting , and when I grab the > .avi > files , they are just static and the green screen that my video always > shows > when there is no signal to it , however , there should be good signal , > does > freevo need to be running , the front end I mean , for it to record > actual > video , or did I maybe miss a step? > > > - Original Message - > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 1:17 PM > Subject: Re: [Freevo-users] recording.. > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > If I formed that command propery then it looks like the error is > telling > me > > > that I don't have mplayer configured properly , ie;; codecs.conf > isn't > there > > > and frameno.avi and mencoder etc.. any suggestions how to fix??? > Below > is > > > the results of the command.. =\ > > > > Ignore that stuff. It's informative, nothing more. > > > > This is the important line: > > > > > -tv on is deprecated, use tv:// instead > > > Exiting... (error parsing cmdline) > > > > I had the same problem. Change the options line after -tv. Take out > the > > 'on:'. Then, at then end of your command line, enter a tv://. That > > should clear it up. > > > > ---Patrick M [EMAIL PROTECTED]:3784715-- > > "You know, this is how the sum total of human knowledge is increased. > > Not with idle speculation and meaningless chatter, but with a > > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > > > > --- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 > > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is
Re: [Freevo-users] recording..
Ok , Now , new problem , recordings are starting , and when I grab the .avi files , they are just static and the green screen that my video always shows when there is no signal to it , however , there should be good signal , does freevo need to be running , the front end I mean , for it to record actual video , or did I maybe miss a step? - Original Message - From: "Patrick M Geahan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. > On Tue, 13 Jan 2004, Bikr wrote: > > > If I formed that command propery then it looks like the error is telling me > > that I don't have mplayer configured properly , ie;; codecs.conf isn't there > > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is > > the results of the command.. =\ > > Ignore that stuff. It's informative, nothing more. > > This is the important line: > > > -tv on is deprecated, use tv:// instead > > Exiting... (error parsing cmdline) > > I had the same problem. Change the options line after -tv. Take out the > 'on:'. Then, at then end of your command line, enter a tv://. That > should clear it up. > > ---Patrick M [EMAIL PROTECTED]:3784715-- > "You know, this is how the sum total of human knowledge is increased. > Not with idle speculation and meaningless chatter, but with a > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
ahah I think I got it , went to the vcr section of course , toko out the on from -tv then went down to the filename section and removed the right paren , and made a new line under that containing this 'tv:// ') hopefully that'll do it =) let's see.. --Josh - Original Message - From: "Bikr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:24 PM Subject: Re: [Freevo-users] recording.. > woot , there it is , from command line , now let me try to figure out how to > edit it local_conf.pyIf you get this before I do , let me know how to do > it , if not , then thanks annyway hahah.. I'll respond when I get it > working.. =)---Josh > > > - Original Message - > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 1:17 PM > Subject: Re: [Freevo-users] recording.. > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > If I formed that command propery then it looks like the error is telling > me > > > that I don't have mplayer configured properly , ie;; codecs.conf isn't > there > > > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below > is > > > the results of the command.. =\ > > > > Ignore that stuff. It's informative, nothing more. > > > > This is the important line: > > > > > -tv on is deprecated, use tv:// instead > > > Exiting... (error parsing cmdline) > > > > I had the same problem. Change the options line after -tv. Take out the > > 'on:'. Then, at then end of your command line, enter a tv://. That > > should clear it up. > > > > ---Patrick M [EMAIL PROTECTED]:3784715-- > > "You know, this is how the sum total of human knowledge is increased. > > Not with idle speculation and meaningless chatter, but with a > > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > > > > --- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
woot , it's working , I just tried recording a current show and the avi file showed up in the directory , now to see if it works , might have to wait till i get home , unless it'll let me download it , but my upstream sucks kinda.. Thanks so much guys.. This was driving me [EMAIL PROTECTED]@#%haha , Now , anyway that anyone knows to align the guide , it's a bit off to the side when in freevo.. - Original Message ----- From: "Bikr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:24 PM Subject: Re: [Freevo-users] recording.. > woot , there it is , from command line , now let me try to figure out how to > edit it local_conf.pyIf you get this before I do , let me know how to do > it , if not , then thanks annyway hahah.. I'll respond when I get it > working.. =)---Josh > > > - Original Message - > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 1:17 PM > Subject: Re: [Freevo-users] recording.. > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > If I formed that command propery then it looks like the error is telling > me > > > that I don't have mplayer configured properly , ie;; codecs.conf isn't > there > > > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below > is > > > the results of the command.. =\ > > > > Ignore that stuff. It's informative, nothing more. > > > > This is the important line: > > > > > -tv on is deprecated, use tv:// instead > > > Exiting... (error parsing cmdline) > > > > I had the same problem. Change the options line after -tv. Take out the > > 'on:'. Then, at then end of your command line, enter a tv://. That > > should clear it up. > > > > ---Patrick M [EMAIL PROTECTED]:3784715-- > > "You know, this is how the sum total of human knowledge is increased. > > Not with idle speculation and meaningless chatter, but with a > > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > > > > --- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
woot , there it is , from command line , now let me try to figure out how to edit it local_conf.pyIf you get this before I do , let me know how to do it , if not , then thanks annyway hahah.. I'll respond when I get it working.. =)---Josh - Original Message - From: "Patrick M Geahan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:17 PM Subject: Re: [Freevo-users] recording.. > On Tue, 13 Jan 2004, Bikr wrote: > > > If I formed that command propery then it looks like the error is telling me > > that I don't have mplayer configured properly , ie;; codecs.conf isn't there > > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is > > the results of the command.. =\ > > Ignore that stuff. It's informative, nothing more. > > This is the important line: > > > -tv on is deprecated, use tv:// instead > > Exiting... (error parsing cmdline) > > I had the same problem. Change the options line after -tv. Take out the > 'on:'. Then, at then end of your command line, enter a tv://. That > should clear it up. > > ---Patrick M [EMAIL PROTECTED]:3784715-- > "You know, this is how the sum total of human knowledge is increased. > Not with idle speculation and meaningless chatter, but with a > medium-sized hammer and some free time." - [EMAIL PROTECTED], a.f.c-a > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
Ok , I copied the codecs.conf file from /usr/share/doc/mplayer~/ to /etc/mplayer , now it only complains about frameno.avi and file://.mplayer/mencoder - Original Message - From: "Bikr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:00 PM Subject: Re: [Freevo-users] recording.. > If I formed that command propery then it looks like the error is telling me > that I don't have mplayer configured properly , ie;; codecs.conf isn't there > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is > the results of the command.. =\ > > > > > > > bash-2.05b# /usr/bin/mencoder -tv > on:driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh > t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea > udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts > vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts > br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o > /media/tv/0-13_11:30_Real_TV_-_.avi > > MEncoder 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team > > CPU: Advanced Micro Devices Duron MG Morgan 1103 MHz (Family: 6, Stepping: > 0) > Detected cache-line size is 64 bytes > CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 > Compiled with Runtime CPU Detection - WARNING - this is not optimal! > To get best performance, recompile MPlayer > with --disable-runtime-cpudetection. > Reading file://.mplayer/codecs.conf: Can't open '//.mplayer/codecs.conf': No > such file or directory > Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No > such file or directory > Using built-in default codecs.conf. > File not found: 'frameno.avi' > Failed to open frameno.avi > Reading config file file://.mplayer/mencoder: No such file or directory > -tv on is deprecated, use tv:// instead > Exiting... (error parsing cmdline) > bash-2.05b# > > > > --- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
If I formed that command propery then it looks like the error is telling me that I don't have mplayer configured properly , ie;; codecs.conf isn't there and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is the results of the command.. =\ bash-2.05b# /usr/bin/mencoder -tv on:driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/0-13_11:30_Real_TV_-_.avi MEncoder 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Duron MG Morgan 1103 MHz (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Compiled with Runtime CPU Detection - WARNING - this is not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection. Reading file://.mplayer/codecs.conf: Can't open '//.mplayer/codecs.conf': No such file or directory Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. File not found: 'frameno.avi' Failed to open frameno.avi Reading config file file://.mplayer/mencoder: No such file or directory -tv on is deprecated, use tv:// instead Exiting... (error parsing cmdline) bash-2.05b# --- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
Re: [Freevo-users] recording..
:keyint=30 -oac mp3lame -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o /media/tv/01-13_11:30_Real_TV_-_.avi 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: past wait()!! 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER HANDLING EVENT 2004/01/13 11:30 EST [*RecordServer*] killing pid 5357 with sig 15 2004/01/13 11:30 EST [*RecordServer*] recorderver: After wait() 2004/01/13 11:30 EST [*RecordServer*] RECORDSERVER HANDLING EVENT 2004/01/13 11:30 EST [*RecordServer*] waiting on pid 5357 2004/01/13 11:30 EST [*RecordServer*] Record_Thread::run: mode=idle 2004/01/13 11:30 EST [HTTPChannel,15,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:10 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:30 EST [HTTPChannel,16,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:10 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:30 EST [HTTPChannel,17,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:15 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:30 EST [HTTPChannel,18,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:15 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:30 EST [HTTPChannel,19,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:21 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:30 EST [HTTPChannel,20,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:30:21 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:32 EST [HTTPChannel,21,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:32:04 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:32 EST [HTTPChannel,22,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:32:04 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:35 EST [HTTPChannel,23,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:35:07 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:35 EST [HTTPChannel,24,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:35:08 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:36 EST [HTTPChannel,25,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:36:18 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:36 EST [HTTPChannel,26,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:36:18 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:47 EST [HTTPChannel,27,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:47:45 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:47 EST [HTTPChannel,28,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:47:46 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:54 EST [HTTPChannel,29,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:54:37 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:54 EST [HTTPChannel,30,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:54:37 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:57 EST [HTTPChannel,31,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:57:29 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:57 EST [HTTPChannel,32,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:57:29 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:58 EST [HTTPChannel,33,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:58:35 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:58 EST [HTTPChannel,34,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:58:35 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:59 EST [HTTPChannel,35,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:59:32 +] "POST / HTTP/1.0" 200 230 "-" "xmlrpclib.py/1.0.1 (by www.pythonware.com)" 2004/01/13 11:59 EST [HTTPChannel,36,127.0.0.1] 127.0.0.1 - - [13/Jan/2004:16:59:43 +] "POST / HTTP/1.0" 200 1920 "-" "xmlrpclib.py/1
[Freevo-users] recording..
Just wanted to say that it doesn't seem to record at all , even if i Try to record manually.. any ideas?? still no sign of record_daemon.py or whatever either.. =\ - Original Message - From: Bikr To: [EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 10:52 AM Subject: [Freevo-users] recording daemon py?? Hello.. I've been trying to get freevo 100% setup for some time now. I finally got it working with my 36" VGA monitor. The monitor only runs 640 x 480 , the guide is still a little off centered but everything else is good now , just can't see the channel numbers etc... I am having trouble following the docs on recording though.. I have setup freevo , and it works , I goto the guide and hit f6 on a program , it tells me that it is scheduled to be recorded , and the webfront says that it is recording it , however , it never gets recorded.. I have my record directory set to /media/tv and nothing ever shows up , It freely lets me pick other channels even though it shouldn't so that it can record etc.. The docs all mention entering a cron to run recorddaemon.py or something but that file doesn't exist in my /src/tv directory.. Is this a new thing some new way of doing it , I have the recordserver running constantly as well using /usr/local/freevo/freevo recordserver and i verify that it's running by issuing /usr/local/freevo/freevo recordserver and it responds with "already running" etc.. If you have any ideas on how to get this working correctly please let me know , as I'm in dire straights haha.. --Josh
[Freevo-users] recording daemon py??
Hello.. I've been trying to get freevo 100% setup for some time now. I finally got it working with my 36" VGA monitor. The monitor only runs 640 x 480 , the guide is still a little off centered but everything else is good now , just can't see the channel numbers etc... I am having trouble following the docs on recording though.. I have setup freevo , and it works , I goto the guide and hit f6 on a program , it tells me that it is scheduled to be recorded , and the webfront says that it is recording it , however , it never gets recorded.. I have my record directory set to /media/tv and nothing ever shows up , It freely lets me pick other channels even though it shouldn't so that it can record etc.. The docs all mention entering a cron to run recorddaemon.py or something but that file doesn't exist in my /src/tv directory.. Is this a new thing some new way of doing it , I have the recordserver running constantly as well using /usr/local/freevo/freevo recordserver and i verify that it's running by issuing /usr/local/freevo/freevo recordserver and it responds with "already running" etc.. If you have any ideas on how to get this working correctly please let me know , as I'm in dire straights haha.. --Josh