AW: [Freevo-users] Re: Snapshot of 02.Sept.2003: Some problems (and proposed solutio ns.. .)
> -Ursprüngliche Nachricht- > Von: Wan Tat Chee [mailto:[EMAIL PROTECTED] > > The /etc/freevo.conf file can only support one setting for display. > If you want to switch between the two, you'd need to keep two versions of > the config file and setup the correct version before starting freevo. > Hi, no, it seems to work without the display line in freevo.conf. (Ok, I have not really checked all of them, perhaps there is display=X11 in ~/.freevo/freevo.conf.) > Freevo should work automatically in either framebuffer mode or X11 mode, > but mplayer uses the display setting to determine which display to use. So > in framebuffer mode, you need display=fbdev (works in 1.3.4 on my GF4 > 440MX), and in X11, you need display=x11. display=sdl didn't work > correctly for me for various reasons. On my (1.3.4, nvidia-something) I do not have to switch anything. It just works. When I have a look at the debug output of freevo, it seems to start mplayer with a command line option like -vo xv,sdl,x11,... or something like this. I believe that mplayer probes the given display options and runs with the first one working. But as Dischi said, this might not work with xine/fbxine. Regards, Thorsten --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
AW: [Freevo-users] Re: Snapshot of 02.Sept.2003: Some problems (and proposed solutio ns.. .)
> -Ursprüngliche Nachricht- > Von: William Holt [mailto:[EMAIL PROTECTED] > > > > The /etc/freevo.conf file can only support one setting for display. > > If you want to switch between the two, you'd need to keep two versions > of > > the config file and setup the correct version before starting freevo. > > > > Freevo should work automatically in either framebuffer mode or X11 mode, > > but mplayer uses the display setting to determine which display to use. > So > > in framebuffer mode, you need display=fbdev (works in 1.3.4 on my GF4 > > 440MX), and in X11, you need display=x11. display=sdl didn't work > > correctly for me for various reasons. > > > Mabey a command switch should be added to freevo to allow setting a > different path to configs > Hi, as I have written before, it just works for me like it is... And I can use freevo in X11 or framebuffer. I don't think that we really need a command switch. Just a little script which copies around the different config files would do it. Regards, Thorsten --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
AW: [Freevo-users] Re: Snapshot of 02.Sept.2003: Some problems (and proposed solutio ns.. .)
> -Ursprüngliche Nachricht- > Von: Dirk Meyer [mailto:[EMAIL PROTECTED] > Gesendet: Mittwoch, 3. September 2003 18:07 > An: [EMAIL PROTECTED] > Betreff: [Freevo-users] Re: Snapshot of 02.Sept.2003: Some problems (and > proposed solutio ns.. .) > > "Pferdekaemper, Thorsten" wrote: > > I am pretty sure that I am using freevo in X11 mode and from the > > console in framebuffer mode. (After deleting the four lines > > mentioned above.) I am using an nvidia graphics card (...) and the > > vesa framebuffer (the one with the penguin). > > Sorry, there was a missunderstanding here. I didn't mean you don't > know if you run Freevo in X11 or fb mode, Freevo itself doesn't know Hi, there's no need for the sorry, I am not really sure myself... :-) > Yes. So basicly when you have X running and Freevo display is set to > fbdev or mga, Freevo should autoswitch to x11. On the other side, when > you set the display to x11 and start without X, freevo should > autoswitch to fbcon. > > > So everything works fine, but it ssems that it shouldn't. Or am I > > missing something? > > Don't know about everything, but when freevo thinks he's using x11 but > you run it on framebuffer, Freevo will choose xine and not fbxine for > dvd nav, which doesn't work. > So it should be no problem when I use mplayer, because mplayer seems to work with either one. But one question remains: Why does mplayer not work, if I try to set display=vesafb oder fbdev in freevo.config? mplayer complains about not being able to open the display. When I just delete the display line in freevo.config, it works. Why that? It should make no difference... Regards, Thorsten --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users