Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
Sucess! I managed to get the dxr3 working in slow degrees last night... Started by trying cat test.mpg > /dev/em8300_mv Expecting to see nothing, I got a few garbled images (This was definatley progress! I didn't expect it to play properly as its an mpeg not an mv stream) Tried a few more files, got more or less the same results (Still better than nothing) Spent ages working with mplayer - only to discover that the dxr3 support is broken... tried to fix it by getting a newer version of mplayer and compiling that, but it complained about missing header files for the dxr3 (very strange - where have they gone since the last compile of mplayer? Or maybe I had copied them into the mplayer source dir instead - can't remember off hand - anyhoo I can sort that). Tried an older release of freevo 1.3.2-pre4 binary - and hay presto, TVout via the dxr3... sweet! (Major problem with audio synch on divx movies - but hey, one thing at a time) Now to try and get everything in the latest release working... - Original Message - From: "Johan Celén" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 4:56 PM Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > hmm.. have you followed the instructions of dxr3 setup (not the one in > freevo)? > do you have the devices for the dxr3 card? > cd em8300;cd modules;make devices > or something like that.. > > > > - Original Message - > From: "Mark Benson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 4:38 PM > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Ok not 100% sure about this but I've just tried playing an mpeg 1 file > thru > > mplayer on a remote shell (not sure if doing it this way will work but I > > can't see why not - even though I can't physically see the output :-). > > > > tried mplayer -vo dxr3 -ao oss://em8300_ma-0 test.mpg > > > > and mplayer -vo dxr3 test.mpg > > > > But mplayer complains that it can't open the device... > > == > > Playing test.mpg > > MPEG-ES file format detected. > > VIDEO: MPEG1 160x120 (aspect 1) 25.00 fps 409.6 kbps (51.2 kbyte/s) > > Error opening/initializing the selected video_out (-vo) device. > > > > > > Exiting... (End of file) > > == > > This is the a version of mplayer that I compliled for dxr3 support - > > followed the docs and it all seemed ok, dxr3 support was listed. > > > > I'm stumped... > > > > - Original Message - > > From: "Johan Celén" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 20, 2003 2:31 PM > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > > not system stream... > > > > > > > Hopefully your card will work when you try it with mplayer :) > > > Seems like you have setup everything right. You might want to run > > > em8300setup -d btw, > > > then you'll be able to get both ac3 and pcm sound. I get the flicker on > > the > > > tv everytime I reboot / > > > reinitialize the card, so that's normal. > > > You should be able to play almost everything with your dxr3 card. All > > > mpeg1/2 streams should work fine. > > > You can also play xvid/divx. etc with mplayer, it renders the movie to > > mpeg > > > on the fly. :)). > > > > > > > > > > > > - Original Message - > > > From: "Mark Benson" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 20, 2003 1:37 PM > > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video > stream > > > not system stream... > > > > > > > > > > Thanks Johan, > > > > > > > > I haven't tried running it with mplayer as yet, as I was trying to > work > > > thru > > > > everything systematically. I will try mplayer when I'm actually > infront > > of > > > > the box next. I was wondering if the mpeg should be a specific format > > for > > > > the dxr3, maybe it can only scale divisions of PAL resolutions? > > > > > > > > I'm currently loading the modules by hand and then uploading the > > > > microcode... rebooting doesn't have any affect for me. > > > > > > > > If I run ./em8300setup -
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
hmm.. have you followed the instructions of dxr3 setup (not the one in freevo)? do you have the devices for the dxr3 card? cd em8300;cd modules;make devices or something like that.. - Original Message - From: "Mark Benson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 4:38 PM Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > Ok not 100% sure about this but I've just tried playing an mpeg 1 file thru > mplayer on a remote shell (not sure if doing it this way will work but I > can't see why not - even though I can't physically see the output :-). > > tried mplayer -vo dxr3 -ao oss://em8300_ma-0 test.mpg > > and mplayer -vo dxr3 test.mpg > > But mplayer complains that it can't open the device... > == > Playing test.mpg > MPEG-ES file format detected. > VIDEO: MPEG1 160x120 (aspect 1) 25.00 fps 409.6 kbps (51.2 kbyte/s) > Error opening/initializing the selected video_out (-vo) device. > > > Exiting... (End of file) > == > This is the a version of mplayer that I compliled for dxr3 support - > followed the docs and it all seemed ok, dxr3 support was listed. > > I'm stumped... > > - Original Message - > From: "Johan Celén" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 2:31 PM > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Hopefully your card will work when you try it with mplayer :) > > Seems like you have setup everything right. You might want to run > > em8300setup -d btw, > > then you'll be able to get both ac3 and pcm sound. I get the flicker on > the > > tv everytime I reboot / > > reinitialize the card, so that's normal. > > You should be able to play almost everything with your dxr3 card. All > > mpeg1/2 streams should work fine. > > You can also play xvid/divx. etc with mplayer, it renders the movie to > mpeg > > on the fly. :)). > > > > > > > > - Original Message - > > From: "Mark Benson" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 20, 2003 1:37 PM > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > > not system stream... > > > > > > > Thanks Johan, > > > > > > I haven't tried running it with mplayer as yet, as I was trying to work > > thru > > > everything systematically. I will try mplayer when I'm actually infront > of > > > the box next. I was wondering if the mpeg should be a specific format > for > > > the dxr3, maybe it can only scale divisions of PAL resolutions? > > > > > > I'm currently loading the modules by hand and then uploading the > > > microcode... rebooting doesn't have any affect for me. > > > > > > If I run ./em8300setup -q first it complains that I need to upload the > > > microcode first, so I run ./em8300setup and it returns... > > > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup > > > Video Aspect Audio Spu > > > PAL 4:3 ANALOG OFF > > > > > > Running ./em8300setup -q returns the same info: > > > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup -q > > > Video Aspect Audio Spu > > > PAL 4:3 ANALOG OFF > > > > > > Which sounds ok to me - I'm in the uk so pal should be fine... > > > > > > So far the closest I've got the getting any output from the dxr3 is > screen > > > flicker when loading the modules and microcode. > > > > > > I'm running RH9 with 2.4.20-19.9 > > > I'm running on a dual celeron box (an old abit BP6) > > > > > > > > > > > > - Original Message - > > > From: "Johan Celén" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 20, 2003 11:37 AM > > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video > stream > > > not system stream... > > > > > > > > > > Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. > > > > I've got the same error that you have.. but all I had to do is to > > reboot, > > > > and then it worked. > > > > what do you get if you run em8300setup -q ? Does everything looks ok? > > > > have y
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
Ok not 100% sure about this but I've just tried playing an mpeg 1 file thru mplayer on a remote shell (not sure if doing it this way will work but I can't see why not - even though I can't physically see the output :-). tried mplayer -vo dxr3 -ao oss://em8300_ma-0 test.mpg and mplayer -vo dxr3 test.mpg But mplayer complains that it can't open the device... == Playing test.mpg MPEG-ES file format detected. VIDEO: MPEG1 160x120 (aspect 1) 25.00 fps 409.6 kbps (51.2 kbyte/s) Error opening/initializing the selected video_out (-vo) device. Exiting... (End of file) == This is the a version of mplayer that I compliled for dxr3 support - followed the docs and it all seemed ok, dxr3 support was listed. I'm stumped... - Original Message - From: "Johan Celén" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 2:31 PM Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > Hopefully your card will work when you try it with mplayer :) > Seems like you have setup everything right. You might want to run > em8300setup -d btw, > then you'll be able to get both ac3 and pcm sound. I get the flicker on the > tv everytime I reboot / > reinitialize the card, so that's normal. > You should be able to play almost everything with your dxr3 card. All > mpeg1/2 streams should work fine. > You can also play xvid/divx. etc with mplayer, it renders the movie to mpeg > on the fly. :)). > > > > - Original Message - > From: "Mark Benson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 1:37 PM > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Thanks Johan, > > > > I haven't tried running it with mplayer as yet, as I was trying to work > thru > > everything systematically. I will try mplayer when I'm actually infront of > > the box next. I was wondering if the mpeg should be a specific format for > > the dxr3, maybe it can only scale divisions of PAL resolutions? > > > > I'm currently loading the modules by hand and then uploading the > > microcode... rebooting doesn't have any affect for me. > > > > If I run ./em8300setup -q first it complains that I need to upload the > > microcode first, so I run ./em8300setup and it returns... > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup > > Video Aspect Audio Spu > > PAL 4:3 ANALOG OFF > > > > Running ./em8300setup -q returns the same info: > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup -q > > Video Aspect Audio Spu > > PAL 4:3 ANALOG OFF > > > > Which sounds ok to me - I'm in the uk so pal should be fine... > > > > So far the closest I've got the getting any output from the dxr3 is screen > > flicker when loading the modules and microcode. > > > > I'm running RH9 with 2.4.20-19.9 > > I'm running on a dual celeron box (an old abit BP6) > > > > > > > > - Original Message - > > From: "Johan Celén" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 20, 2003 11:37 AM > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > > not system stream... > > > > > > > Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. > > > I've got the same error that you have.. but all I had to do is to > reboot, > > > and then it worked. > > > what do you get if you run em8300setup -q ? Does everything looks ok? > > > have you tried to run the card with mplayer (without freevo) > > > mplayer -vo dxr3 -ao oss://dev/em8300_ma-0 test.mpg > > > (or something like that) > > > This is my ldm: > > > > > > modprobe i2c-algo-bit > > > insmod /apps/em8300-0.13.0/modules/adv717x.o pixelport_16bit=0 > > > pixelport_other_pal=0 > > > insmod /apps/em8300-0.13.0/modules/bt865.o > > > insmod /apps/em8300-0.13.0/modules/em8300.o dicom_other_pal=0 > dicom_fix=0 > > > dicom_control=1 > > > > > > and in my rc.local i've got > > > em8300setup -d > > > you might have to set the pal/pal60/ntsc too.. think i changed the > > defaults > > > on my modules to that.. > > > > > > Wich kernel are you using btw? I'm running 2.4.21, works perfectly. But > > with > > > 2.4.22rc2 em8300 wont even compile :/ > > >
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
It have come thru, and I have already answered it ;) If you want you can join #freevo on irc.gnu.org. I (^Y0da^) can try to help you there (will be faster that way ;) I'll be there in an hour or so.. tyyl - Original Message - From: "Mark Benson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 3:31 PM Subject: Fw: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > (My posts don't seem to be getting thru - trying again) > > - Original Message - > From: "Mark Benson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 12:37 PM > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Thanks Johan, > > > > I haven't tried running it with mplayer as yet, as I was trying to work > thru > > everything systematically. I will try mplayer when I'm actually infront of > > the box next. I was wondering if the mpeg should be a specific format for > > the dxr3, maybe it can only scale divisions of PAL resolutions? > > > > I'm currently loading the modules by hand and then uploading the > > microcode... rebooting doesn't have any affect for me. > > > > If I run ./em8300setup -q first it complains that I need to upload the > > microcode first, so I run ./em8300setup and it returns... > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup > > Video Aspect Audio Spu > > PAL 4:3 ANALOG OFF > > > > Running ./em8300setup -q returns the same info: > > > > [EMAIL PROTECTED] em8300setup]# ./em8300setup -q > > Video Aspect Audio Spu > > PAL 4:3 ANALOG OFF > > > > Which sounds ok to me - I'm in the uk so pal should be fine... > > > > So far the closest I've got the getting any output from the dxr3 is screen > > flicker when loading the modules and microcode. > > > > I'm running RH9 with 2.4.20-19.9 > > I'm running on a dual celeron box (an old abit BP6) > > > > > > > > - Original Message - > > From: "Johan Celén" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 20, 2003 11:37 AM > > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > > not system stream... > > > > > > > Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. > > > I've got the same error that you have.. but all I had to do is to > reboot, > > > and then it worked. > > > what do you get if you run em8300setup -q ? Does everything looks ok? > > > have you tried to run the card with mplayer (without freevo) > > > mplayer -vo dxr3 -ao oss://dev/em8300_ma-0 test.mpg > > > (or something like that) > > > This is my ldm: > > > > > > modprobe i2c-algo-bit > > > insmod /apps/em8300-0.13.0/modules/adv717x.o pixelport_16bit=0 > > > pixelport_other_pal=0 > > > insmod /apps/em8300-0.13.0/modules/bt865.o > > > insmod /apps/em8300-0.13.0/modules/em8300.o dicom_other_pal=0 > dicom_fix=0 > > > dicom_control=1 > > > > > > and in my rc.local i've got > > > em8300setup -d > > > you might have to set the pal/pal60/ntsc too.. think i changed the > > defaults > > > on my modules to that.. > > > > > > Wich kernel are you using btw? I'm running 2.4.21, works perfectly. But > > with > > > 2.4.22rc2 em8300 wont even compile :/ > > > had to patch it to support i2c 2.8.0.. but the patch made em8300 to fail > > > compilation :/ > > > Anyone running dxr3 with 2.4.22rc2 (or atleast i2c 2.8.0 ? ) > > > > > > Regards > > > Johan > > > > > > > > > > > > - Original Message - > > > From: "Mark Benson" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, August 20, 2003 11:27 AM > > > Subject: Fw: [Freevo-users] No display device in freevo? Dxr3 video > stream > > > not system stream... > > > > > > > > > > Hi all, > > > > > > > > I'm still having problems getting my dxr3 working with freevo, > > > > > > > > The old post is what happens when I try to output an mpeg to the > card... > > > > > > > > When I run freevo with dxr3 set as the output, freevo complains that > > there > > > > is no output device... >
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
Hopefully your card will work when you try it with mplayer :) Seems like you have setup everything right. You might want to run em8300setup -d btw, then you'll be able to get both ac3 and pcm sound. I get the flicker on the tv everytime I reboot / reinitialize the card, so that's normal. You should be able to play almost everything with your dxr3 card. All mpeg1/2 streams should work fine. You can also play xvid/divx. etc with mplayer, it renders the movie to mpeg on the fly. :)). - Original Message - From: "Mark Benson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 1:37 PM Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > Thanks Johan, > > I haven't tried running it with mplayer as yet, as I was trying to work thru > everything systematically. I will try mplayer when I'm actually infront of > the box next. I was wondering if the mpeg should be a specific format for > the dxr3, maybe it can only scale divisions of PAL resolutions? > > I'm currently loading the modules by hand and then uploading the > microcode... rebooting doesn't have any affect for me. > > If I run ./em8300setup -q first it complains that I need to upload the > microcode first, so I run ./em8300setup and it returns... > > [EMAIL PROTECTED] em8300setup]# ./em8300setup > Video Aspect Audio Spu > PAL 4:3 ANALOG OFF > > Running ./em8300setup -q returns the same info: > > [EMAIL PROTECTED] em8300setup]# ./em8300setup -q > Video Aspect Audio Spu > PAL 4:3 ANALOG OFF > > Which sounds ok to me - I'm in the uk so pal should be fine... > > So far the closest I've got the getting any output from the dxr3 is screen > flicker when loading the modules and microcode. > > I'm running RH9 with 2.4.20-19.9 > I'm running on a dual celeron box (an old abit BP6) > > > > - Original Message ----- > From: "Johan Celén" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 11:37 AM > Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. > > I've got the same error that you have.. but all I had to do is to reboot, > > and then it worked. > > what do you get if you run em8300setup -q ? Does everything looks ok? > > have you tried to run the card with mplayer (without freevo) > > mplayer -vo dxr3 -ao oss://dev/em8300_ma-0 test.mpg > > (or something like that) > > This is my ldm: > > > > modprobe i2c-algo-bit > > insmod /apps/em8300-0.13.0/modules/adv717x.o pixelport_16bit=0 > > pixelport_other_pal=0 > > insmod /apps/em8300-0.13.0/modules/bt865.o > > insmod /apps/em8300-0.13.0/modules/em8300.o dicom_other_pal=0 dicom_fix=0 > > dicom_control=1 > > > > and in my rc.local i've got > > em8300setup -d > > you might have to set the pal/pal60/ntsc too.. think i changed the > defaults > > on my modules to that.. > > > > Wich kernel are you using btw? I'm running 2.4.21, works perfectly. But > with > > 2.4.22rc2 em8300 wont even compile :/ > > had to patch it to support i2c 2.8.0.. but the patch made em8300 to fail > > compilation :/ > > Anyone running dxr3 with 2.4.22rc2 (or atleast i2c 2.8.0 ? ) > > > > Regards > > Johan > > > > > > > > - Original Message - > > From: "Mark Benson" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 20, 2003 11:27 AM > > Subject: Fw: [Freevo-users] No display device in freevo? Dxr3 video stream > > not system stream... > > > > > > > Hi all, > > > > > > I'm still having problems getting my dxr3 working with freevo, > > > > > > The old post is what happens when I try to output an mpeg to the card... > > > > > > When I run freevo with dxr3 set as the output, freevo complains that > there > > > is no output device... > > > > > > Anyone with a working dxr3 have any ideas? > > > > > > - Original Message - > > > From: "Mark Benson" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, August 15, 2003 2:09 PM > > > Subject: [Freevo-users] Dxr3 video stream not system stream... > > > > > > > > > > > > > > > > > > > > > > > I've been trying to get my dxr3 working - got so far... > > > >
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
Thanks Johan, I haven't tried running it with mplayer as yet, as I was trying to work thru everything systematically. I will try mplayer when I'm actually infront of the box next. I was wondering if the mpeg should be a specific format for the dxr3, maybe it can only scale divisions of PAL resolutions? I'm currently loading the modules by hand and then uploading the microcode... rebooting doesn't have any affect for me. If I run ./em8300setup -q first it complains that I need to upload the microcode first, so I run ./em8300setup and it returns... [EMAIL PROTECTED] em8300setup]# ./em8300setup Video Aspect Audio Spu PAL 4:3 ANALOG OFF Running ./em8300setup -q returns the same info: [EMAIL PROTECTED] em8300setup]# ./em8300setup -q Video Aspect Audio Spu PAL 4:3 ANALOG OFF Which sounds ok to me - I'm in the uk so pal should be fine... So far the closest I've got the getting any output from the dxr3 is screen flicker when loading the modules and microcode. I'm running RH9 with 2.4.20-19.9 I'm running on a dual celeron box (an old abit BP6) - Original Message - From: "Johan Celén" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 11:37 AM Subject: Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. > I've got the same error that you have.. but all I had to do is to reboot, > and then it worked. > what do you get if you run em8300setup -q ? Does everything looks ok? > have you tried to run the card with mplayer (without freevo) > mplayer -vo dxr3 -ao oss://dev/em8300_ma-0 test.mpg > (or something like that) > This is my ldm: > > modprobe i2c-algo-bit > insmod /apps/em8300-0.13.0/modules/adv717x.o pixelport_16bit=0 > pixelport_other_pal=0 > insmod /apps/em8300-0.13.0/modules/bt865.o > insmod /apps/em8300-0.13.0/modules/em8300.o dicom_other_pal=0 dicom_fix=0 > dicom_control=1 > > and in my rc.local i've got > em8300setup -d > you might have to set the pal/pal60/ntsc too.. think i changed the defaults > on my modules to that.. > > Wich kernel are you using btw? I'm running 2.4.21, works perfectly. But with > 2.4.22rc2 em8300 wont even compile :/ > had to patch it to support i2c 2.8.0.. but the patch made em8300 to fail > compilation :/ > Anyone running dxr3 with 2.4.22rc2 (or atleast i2c 2.8.0 ? ) > > Regards > Johan > > > > - Original Message - > From: "Mark Benson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, August 20, 2003 11:27 AM > Subject: Fw: [Freevo-users] No display device in freevo? Dxr3 video stream > not system stream... > > > > Hi all, > > > > I'm still having problems getting my dxr3 working with freevo, > > > > The old post is what happens when I try to output an mpeg to the card... > > > > When I run freevo with dxr3 set as the output, freevo complains that there > > is no output device... > > > > Anyone with a working dxr3 have any ideas? > > > > - Original Message - > > From: "Mark Benson" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, August 15, 2003 2:09 PM > > Subject: [Freevo-users] Dxr3 video stream not system stream... > > > > > > > > > > > > > > > > > I've been trying to get my dxr3 working - got so far... > > > > > > > > Currently able to load modules (tv screen flickers - occasionally goes > > > > green), upload microcode (tv screen flickers - if green goes black). > > > > > > > > When I try > > > > > > > > extract_mpeg2 test.mpg > /dev/em8300_mv > > > > > > > > I get the message video stream not system stream repeated for the > approx > > > > duration of the test clip > > > > > > > > The thing that is confusing me is that I have colour bars enabled but > > have > > > > not as yet seen them! Any ideas? > > > > > > > > complied the modules (using the radhat-patched version) > > > > > > > > load the modules using: ./ldm > > > > > > > > ldm options currently (tried various combinations): > > > > > > > > #!/bin/sh > > > > > > > > modprobe i2c-algo-bit > > > > > > > > insmod adv717x.o > > > > # pixelport_16bit=0 pixelport_other_pal=0 swap_redblue_pal=0 > > color_bars=1 > > > > insmod bt865.o > > > > # color_bars=1 > &g
Re: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream...
Yeah.. I have a working dxr3 (hollywood+) in my freevo box.. I've got the same error that you have.. but all I had to do is to reboot, and then it worked. what do you get if you run em8300setup -q ? Does everything looks ok? have you tried to run the card with mplayer (without freevo) mplayer -vo dxr3 -ao oss://dev/em8300_ma-0 test.mpg (or something like that) This is my ldm: modprobe i2c-algo-bit insmod /apps/em8300-0.13.0/modules/adv717x.o pixelport_16bit=0 pixelport_other_pal=0 insmod /apps/em8300-0.13.0/modules/bt865.o insmod /apps/em8300-0.13.0/modules/em8300.o dicom_other_pal=0 dicom_fix=0 dicom_control=1 and in my rc.local i've got em8300setup -d you might have to set the pal/pal60/ntsc too.. think i changed the defaults on my modules to that.. Wich kernel are you using btw? I'm running 2.4.21, works perfectly. But with 2.4.22rc2 em8300 wont even compile :/ had to patch it to support i2c 2.8.0.. but the patch made em8300 to fail compilation :/ Anyone running dxr3 with 2.4.22rc2 (or atleast i2c 2.8.0 ? ) Regards Johan - Original Message - From: "Mark Benson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 11:27 AM Subject: Fw: [Freevo-users] No display device in freevo? Dxr3 video stream not system stream... > Hi all, > > I'm still having problems getting my dxr3 working with freevo, > > The old post is what happens when I try to output an mpeg to the card... > > When I run freevo with dxr3 set as the output, freevo complains that there > is no output device... > > Anyone with a working dxr3 have any ideas? > > - Original Message - > From: "Mark Benson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, August 15, 2003 2:09 PM > Subject: [Freevo-users] Dxr3 video stream not system stream... > > > > > > > > > > > I've been trying to get my dxr3 working - got so far... > > > > > > Currently able to load modules (tv screen flickers - occasionally goes > > > green), upload microcode (tv screen flickers - if green goes black). > > > > > > When I try > > > > > > extract_mpeg2 test.mpg > /dev/em8300_mv > > > > > > I get the message video stream not system stream repeated for the approx > > > duration of the test clip > > > > > > The thing that is confusing me is that I have colour bars enabled but > have > > > not as yet seen them! Any ideas? > > > > > > complied the modules (using the radhat-patched version) > > > > > > load the modules using: ./ldm > > > > > > ldm options currently (tried various combinations): > > > > > > #!/bin/sh > > > > > > modprobe i2c-algo-bit > > > > > > insmod adv717x.o > > > # pixelport_16bit=0 pixelport_other_pal=0 swap_redblue_pal=0 > color_bars=1 > > > insmod bt865.o > > > # color_bars=1 > > > insmod em8300.o > > > # use_bt865=0 bt865_ucode_timeout=1 dicom_fix=0 dicom_control=0 > > > dicom_other_pal=0 activate_loopback=0 > > > > > > load the microcode using: ./em8300setup > > > > > > try to test video output using: extract_mpeg2 test.mpg > /dev/em8300_mv > > > > > > where test.mpg is a test video clip... > > > > > > Thats when I get the video stream not system stream messages... > > > > > > > > > > --- > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > > Data Reports, E-commerce, Portals, and Forums are available now. > > Download today and enter to win an XBOX or Visual Studio .NET. > > > http://aspnet.click-url.com/go/psa0013ave/direct;at.aspnet_072303_01/01 > > ___ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > --- > This SF.net email is sponsored by Dice.com. > Did you know that Dice has over 25,000 tech jobs available today? From > careers in IT to Engineering to Tech Sales, Dice has tech jobs from the > best hiring companies. http://www.dice.com/index.epl?rel_code=104 > ___ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users --- This SF.net email is sponsored by Dice.com. Did you know that Dice has over 25,000 tech jobs available today? From careers in IT to Engineering to Tech Sales, Dice has tech jobs from the best hiring companies. http://www.dice.com/index.epl?rel_code=104 ___ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users