Re: [gentoo-user] wireless network issues
eric heller wrote: Anway, I got driverloader working, and things seem to be working on some level. I got eth1 to run and it's even correctly connecting to my wireless network. I disconnected by ethernet cable, stopped eth0, and then fired up MozillaFirebird. To my delight, everything seemed to be working great! But then I fired up evolution, and it was unable to resolve the address of my pop email server. I thought, what the heck? So I went to my command line and tried to ping the address. Ping returned nothing. So I tried www.yahoo.com. Still nothing. It seems that the only program that can actually resolve host names is MozillaFirebird, and nothing else. Any ideas why this may be? Is there something I need to do to get eth1 setup right? Here's what I did: 1 ln -s /etc/init.d/net.eth0 /etc/init.d/net.eth1 2 rc-update add net.eth1 default 3 edited /etc/conf.d/net to include the line: iface_eth1="dhcp" 4 /etc/init.d/net.eth1 start 5 /etc/init.d/net.eth0 stop But like I said, only MozillaFirebird seems to be able to establish any kind of connection. It may likely be a problem with driverloader, and if it is, then I'll try out their user list, but I'm still not very familiar with gentoo, and I just wondered if there's a step I missed in configuring eth1 to work right. Do I need to somehow "tell" all my programs that they need to use eth1 instead of eth0? Any ideas? This should be correct if you are using DHCP, but it never hurts to check some basics: - does /etc/resolv.conf list correct DNS-servers? - can you ping machines via IP addres instead of host name? - does 'route' list a default gateway? Perhaps /etc/init.d/net.eth0 stop removed the default gateway. Maybe it works if you reverse the order... first stop eth0, than start eth1? -- "Codito ergo sum" Roel Schroeven -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] wireless network issues
I'm using DHCP, yes. I added this line to /etc/conf.d/net: iface_eth1="dhcp" Eric Heller. On Tue, 2003-11-04 at 18:06, Brent L Johnson wrote: > Not sure why Firebird would work and nothing else. > But do you have your DNS servers listed in > /etc/resolv.conf or are you using DHCP? > > - Brent > > > -Original Message- > > From: eric heller [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, November 04, 2003 6:42 PM > > To: [EMAIL PROTECTED] > > Subject: [gentoo-user] wireless network issues > > > > > > Hi! > > > > I recently read on slashdot about a great little program that > > emulates certain windows wireless network card drivers, > > called driverloader (see www.linuxant.com). I was especially > > glad to hear about this because it supports my Intel Centrino > > PRO/Wireless mini-pci card (for which there are currently no > > real linux drivers, at least not to my knowledge). > > > > Anway, I got driverloader working, and things seem to be > > working on some level. I got eth1 to run and it's even > > correctly connecting to my wireless network. I disconnected > > by ethernet cable, stopped eth0, and then fired up > > MozillaFirebird. To my delight, everything seemed to be working great! > > > > But then I fired up evolution, and it was unable to resolve > > the address of my pop email server. I thought, what the heck? > > So I went to my command line and tried to ping the address. > > Ping returned nothing. So I tried www.yahoo.com. Still > > nothing. It seems that the only program that can actually > > resolve host names is MozillaFirebird, and nothing else. > > > > Any ideas why this may be? Is there something I need to do to > > get eth1 setup right? Here's what I did: > > > > 1 ln -s /etc/init.d/net.eth0 /etc/init.d/net.eth1 > > > > 2 rc-update add net.eth1 default > > > > 3 edited /etc/conf.d/net to include the line: > > iface_eth1="dhcp" > > > > 4 /etc/init.d/net.eth1 start > > > > And it started up with no errors. > > > > 5 /etc/init.d/net.eth0 stop > > > > But like I said, only MozillaFirebird seems to be able to > > establish any kind of connection. It may likely be a problem > > with driverloader, and if it is, then I'll try out their user > > list, but I'm still not very familiar with gentoo, and I just > > wondered if there's a step I missed in configuring eth1 to > > work right. Do I need to somehow "tell" all my programs that > > they need to use eth1 instead of eth0? Any ideas? > > > > Thanks! > > > > Eric Heller. > > > > > > -- > > [EMAIL PROTECTED] mailing list > > > > > > > > > > > -- > [EMAIL PROTECTED] mailing list > -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] wireless network issues
Not sure why Firebird would work and nothing else. But do you have your DNS servers listed in /etc/resolv.conf or are you using DHCP? - Brent > -Original Message- > From: eric heller [mailto:[EMAIL PROTECTED] > Sent: Tuesday, November 04, 2003 6:42 PM > To: [EMAIL PROTECTED] > Subject: [gentoo-user] wireless network issues > > > Hi! > > I recently read on slashdot about a great little program that > emulates certain windows wireless network card drivers, > called driverloader (see www.linuxant.com). I was especially > glad to hear about this because it supports my Intel Centrino > PRO/Wireless mini-pci card (for which there are currently no > real linux drivers, at least not to my knowledge). > > Anway, I got driverloader working, and things seem to be > working on some level. I got eth1 to run and it's even > correctly connecting to my wireless network. I disconnected > by ethernet cable, stopped eth0, and then fired up > MozillaFirebird. To my delight, everything seemed to be working great! > > But then I fired up evolution, and it was unable to resolve > the address of my pop email server. I thought, what the heck? > So I went to my command line and tried to ping the address. > Ping returned nothing. So I tried www.yahoo.com. Still > nothing. It seems that the only program that can actually > resolve host names is MozillaFirebird, and nothing else. > > Any ideas why this may be? Is there something I need to do to > get eth1 setup right? Here's what I did: > > 1 ln -s /etc/init.d/net.eth0 /etc/init.d/net.eth1 > > 2 rc-update add net.eth1 default > > 3 edited /etc/conf.d/net to include the line: > iface_eth1="dhcp" > > 4 /etc/init.d/net.eth1 start > > And it started up with no errors. > > 5 /etc/init.d/net.eth0 stop > > But like I said, only MozillaFirebird seems to be able to > establish any kind of connection. It may likely be a problem > with driverloader, and if it is, then I'll try out their user > list, but I'm still not very familiar with gentoo, and I just > wondered if there's a step I missed in configuring eth1 to > work right. Do I need to somehow "tell" all my programs that > they need to use eth1 instead of eth0? Any ideas? > > Thanks! > > Eric Heller. > > > -- > [EMAIL PROTECTED] mailing list > > > > -- [EMAIL PROTECTED] mailing list
[gentoo-user] wireless network issues
Hi! I recently read on slashdot about a great little program that emulates certain windows wireless network card drivers, called driverloader (see www.linuxant.com). I was especially glad to hear about this because it supports my Intel Centrino PRO/Wireless mini-pci card (for which there are currently no real linux drivers, at least not to my knowledge). Anway, I got driverloader working, and things seem to be working on some level. I got eth1 to run and it's even correctly connecting to my wireless network. I disconnected by ethernet cable, stopped eth0, and then fired up MozillaFirebird. To my delight, everything seemed to be working great! But then I fired up evolution, and it was unable to resolve the address of my pop email server. I thought, what the heck? So I went to my command line and tried to ping the address. Ping returned nothing. So I tried www.yahoo.com. Still nothing. It seems that the only program that can actually resolve host names is MozillaFirebird, and nothing else. Any ideas why this may be? Is there something I need to do to get eth1 setup right? Here's what I did: 1 ln -s /etc/init.d/net.eth0 /etc/init.d/net.eth1 2 rc-update add net.eth1 default 3 edited /etc/conf.d/net to include the line: iface_eth1="dhcp" 4 /etc/init.d/net.eth1 start And it started up with no errors. 5 /etc/init.d/net.eth0 stop But like I said, only MozillaFirebird seems to be able to establish any kind of connection. It may likely be a problem with driverloader, and if it is, then I'll try out their user list, but I'm still not very familiar with gentoo, and I just wondered if there's a step I missed in configuring eth1 to work right. Do I need to somehow "tell" all my programs that they need to use eth1 instead of eth0? Any ideas? Thanks! Eric Heller. -- [EMAIL PROTECTED] mailing list