Re: [gentoo-user] DVD ripping copying
After some investigations i found following programs what is the most easiest of them like dvdshrink ? Acidrip dvdrip lxdvdrip TIA Patrick On Tue, 1 Feb 2005 09:48:15 +0100 (CET) "Patrick Marquetecken" <[EMAIL PROTECTED]> wrote: > Hi, > > I have replaced my last windows machine with Gentoo, but forgot that i > used this also for DXD ripping/copying. This machine has no X on it > installed, i'm used to use DVDshrink because its very easy because you > insert the dvd it compress as needed and then you choose start and the > copy is done. > What must i install to do this under Linux, please something easy, so i > can insert a dvd and then create a copy of it. > > TIA > Patrick > > > > > > -- > gentoo-user@gentoo.org mailing list > > > -- "You're dead, Jim." -- McCoy, "Amok Time," stardate 3372.7.. Fingerprint = 2792 057F C445 9486 F932 3AEA D3A3 1B0C 1059 273B ICQ# 316932703 Registered Linux User #44550 http://counter.li.org -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Patrick Marquetecken ([EMAIL PROTECTED]) scribbled: > After some investigations i found following programs what is the most > easiest of them like dvdshrink ? > > Acidrip > dvdrip > lxdvdrip > On Tue, 1 Feb 2005 09:48:15 +0100 (CET) > "Patrick Marquetecken" <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > I have replaced my last windows machine with Gentoo, but forgot that i > > used this also for DXD ripping/copying. This machine has no X on it > > installed, i'm used to use DVDshrink because its very easy because you > > insert the dvd it compress as needed and then you choose start and the > > copy is done. > > What must i install to do this under Linux, please something easy, so > i > > can insert a dvd and then create a copy of it. http://lakedaemon.netmindz.net/dvd9to5/ It removes the menus, uses one stream of audio (5.1), and adjusts the quality just enough to squeeze the movie onto one 4.7GB dvd-/+r at the highest quality possible. I've backed up my collection (>100 dvds) with it without problem. It takes about 1.5 hours per dvd. Let me know if you have any questions. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, 1 Feb 2005 14:41:34 -0500 Jason Cooper <[EMAIL PROTECTED]> wrote: > Patrick Marquetecken ([EMAIL PROTECTED]) scribbled: > > After some investigations i found following programs what is the most > > easiest of them like dvdshrink ? > > > > Acidrip > > dvdrip > > lxdvdrip > > On Tue, 1 Feb 2005 09:48:15 +0100 (CET) > > "Patrick Marquetecken" <[EMAIL PROTECTED]> wrote: > > > > > Hi, > > > > > > I have replaced my last windows machine with Gentoo, but forgot that i > > > used this also for DXD ripping/copying. This machine has no X on it > > > installed, i'm used to use DVDshrink because its very easy because you > > > insert the dvd it compress as needed and then you choose start and the > > > copy is done. > > > What must i install to do this under Linux, please something easy, so > > i > > > can insert a dvd and then create a copy of it. > > > http://lakedaemon.netmindz.net/dvd9to5/ > > > It removes the menus, uses one stream of audio (5.1), and adjusts the > quality just enough to squeeze the movie onto one 4.7GB dvd-/+r at the > highest quality possible. I've backed up my collection (>100 dvds) with > it without problem. It takes about 1.5 hours per dvd. > > Let me know if you have any questions. > > Cooper. > Thats it what I'm looking for, but how do i know how much titles, audio and subtitles. And witch different language there are. Patrick -- "Live long and prosper" -- Spock, "Amok Time," stardate 3372.7.. Fingerprint = 2792 057F C445 9486 F932 3AEA D3A3 1B0C 1059 273B ICQ# 316932703 Registered Linux User #44550 http://counter.li.org -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Patrick Marquetecken ([EMAIL PROTECTED]) scribbled: > On Tue, 1 Feb 2005 14:41:34 -0500 > Jason Cooper <[EMAIL PROTECTED]> wrote: > > > > http://lakedaemon.netmindz.net/dvd9to5/ > > > > > > It removes the menus, uses one stream of audio (5.1), and adjusts the > > quality just enough to squeeze the movie onto one 4.7GB dvd-/+r at the > > highest quality possible. I've backed up my collection (>100 dvds) > with > > it without problem. It takes about 1.5 hours per dvd. > > > > Let me know if you have any questions. > > > > Cooper. > > > Thats it what I'm looking for, but how do i know how much titles, audio > and subtitles. > And witch different language there are. Ah... there's the one small problem. I haven't gotten up the energy to handle subtitles. It's not a cut-and-dry solution. If you're willing to forgo subtitles, you can run 'tcprobe -i /dev/dvd' and then pass the title number and audio track number to dvd9to5.pl with '-t' and '-a'. Most of the time (at least with American dvds) if you want 5.1 audio, just './dvd9to5.pl' grabs the correct stuff. ### tcprobe sample output ### (dvd_reader.c) ac3 en drc 48kHz 2Ch (dvd_reader.c) ac3 en drc 48kHz 6Ch (dvd_reader.c) ac3 es drc 48kHz 2Ch (dvd_reader.c) ac3 fr drc 48kHz 2Ch (dvd_reader.c) subtitle 00= (dvd_reader.c) subtitle 01= (dvd_reader.c) subtitle 02= (dvd_reader.c) DVD title 1/1: 28 chapter(s), 1 angle(s), title set 1 [cut chapter list] # read as: audio english stereo (stream 0) audio english 5.1(stream 1) audio spanish stereo (stream 2) audio french stereo (stream 3) subtitle english subtitle spanish subtitle french 1 or 1 titles, 28 chapters If you figure out how to do the subtitles, let me know. I'd be more than happy to add it in, I just don't have the time to do it myself. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
im glad someone else brought this up, i have been meaning to for a while. i use Intervideo DVD Copy, and it makes an EXACT copy, with one push of a button. its the only reason i boot into windows at all. is there no program that will let you do this in linux? i havent tried wine or anything like that, does anyone think it will work in something like that? ive even considered vmware, but im not too sure how the under lying workings will jive with that, or even if the virtual machine will even see a DVD burner or just a normal cdrom. this is one of my last steps to being windows free, it would be nice to finally kick it to the curb, but i need a good replacment for that program. any ideas? is no one in linux coping entire dvds? i dont want just the movie, i want the whole dang thing! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Jason Cooper <[EMAIL PROTECTED]> writes: >> > What must i install to do this under Linux, please something easy, so >> i >> > can insert a dvd and then create a copy of it. > > I have used this program a lot. > http://lakedaemon.netmindz.net/dvd9to5/ > > > It removes the menus, uses one stream of audio (5.1), and adjusts the That is my problem with the program. > quality just enough to squeeze the movie onto one 4.7GB dvd-/+r at the > highest quality possible. I've backed up my collection (>100 dvds) with > it without problem. It takes about 1.5 hours per dvd. > > Let me know if you have any questions. -- Hilsen Harald. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Nick Smith ([EMAIL PROTECTED]) scribbled: > any ideas? is no one in linux coping entire dvds? i dont want just the > movie, i want the whole dang thing! Naturally, I would agree with you. However, If your source dvd is a dual layer (most are) at 7.9GB, you *can't* copy it to current dvd+/-r's as they are single layer, 4.7GB. The quality loss is noticeable. When I wrote dvd9to5, I made the decision to go for quality as opposed to quantity until such time as dual-layer burners are cheap <$250/<$2. I suspect windows apps that copy everything over are halving the resolution, down-muxing the audio to stereo, or something similar. Hell, most of the time the movie alone, with _no_ audio is ~4.5GB. They gotta make cuts somewhere. I think a lot of developers are holding off on investing a lot of energy into compressing the whole dvd to 4.7GB, cause they see dual-layer burners on the horizon. So why not wait? ah, well, that's my 2cents. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, 01 Feb 2005 18:30:55 -0500, Nick Smith wrote: > im glad someone else brought this up, i have been meaning to for a > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with one > push of a button. Most commercial DVDs are dual layer and won't fit on a single layer DVD-R. To make an exact copy you need a dual layer burner and (expensive) dual layer discs. If the original is less than 4.7GB, you can simply rip it with vobcopy and burn a copy with growisofs. K3b can probably do this too, although I haven't tried. -- Neil Bothwick If ignorance is bliss, why aren't more people happy? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Wed, 2005-02-02 at 00:12 +, Neil Bothwick wrote: > On Tue, 01 Feb 2005 18:30:55 -0500, Nick Smith wrote: > > > im glad someone else brought this up, i have been meaning to for a > > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with one > > push of a button. > > Most commercial DVDs are dual layer and won't fit on a single layer DVD-R. > To make an exact copy you need a dual layer burner and (expensive) dual > layer discs. > the program automaticly transcodes the dvd and compresses it perfectly to fit on a 4.7 (actually 4.4) gig dvd, with the highest possible quality. > If the original is less than 4.7GB, you can simply rip it with vobcopy and > burn a copy with growisofs. K3b can probably do this too, although I > haven't tried. > > > -- > Neil Bothwick > > If ignorance is bliss, why aren't more people happy? > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, 2005-02-01 at 18:56 -0500, Jason Cooper wrote: > Nick Smith ([EMAIL PROTECTED]) scribbled: > > any ideas? is no one in linux coping entire dvds? i dont want just the > > movie, i want the whole dang thing! > > Naturally, I would agree with you. However, If your source dvd is a > dual layer (most are) at 7.9GB, you *can't* copy it to current dvd+/-r's > as they are single layer, 4.7GB. The quality loss is noticeable. When > I wrote dvd9to5, I made the decision to go for quality as opposed to > quantity until such time as dual-layer burners are cheap <$250/<$2. > > I suspect windows apps that copy everything over are halving the > resolution, down-muxing the audio to stereo, or something similar. > Hell, most of the time the movie alone, with _no_ audio is ~4.5GB. They > gotta make cuts somewhere. > > I think a lot of developers are holding off on investing a lot of energy > into compressing the whole dvd to 4.7GB, cause they see dual-layer > burners on the horizon. So why not wait? > > ah, well, that's my 2cents. > > Cooper. > so this program automaticly knows what audio track to grab? cause i have had problems with other programs in the past (dvd x copy) taking the wrong track, say, french, and when i get around to watching the dvd the entire thing is in french. which sucks. i could live without submenus, i never watch them, and most of the time can do without the extras, its just nice to have a professional looking copy when your done. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Harald Arnesen ([EMAIL PROTECTED]) scribbled: > Jason Cooper <[EMAIL PROTECTED]> writes: > >> > What must i install to do this under Linux, please something easy, so > >> i > >> > can insert a dvd and then create a copy of it. > > > > > > I have used this program a lot. > > > http://lakedaemon.netmindz.net/dvd9to5/ > > > > > > It removes the menus, uses one stream of audio (5.1), and adjusts the > > > That is my problem with the program. See my other response in this thread for why I chose not to copy the menus over. It can be done, but last I checked, dvdunauthor isn't reliable. I need dvdunauthor to behave predictably before I can use it for extraction. After that, it's easy. Any other method I've looked at is just too convoluted to be stable. If anyone has had experience recently with dvdunauthor, let me know and I'll take another look at it. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Nick Smith ([EMAIL PROTECTED]) scribbled: > On Tue, 2005-02-01 at 18:56 -0500, Jason Cooper wrote: > > Nick Smith ([EMAIL PROTECTED]) scribbled: > > > any ideas? is no one in linux coping entire dvds? i dont want just the > > > movie, i want the whole dang thing! > > > > Naturally, I would agree with you. However, If your source dvd is a > > dual layer (most are) at 7.9GB, you *can't* copy it to current dvd+/-r's > > as they are single layer, 4.7GB. The quality loss is noticeable. When > > I wrote dvd9to5, I made the decision to go for quality as opposed to > > quantity until such time as dual-layer burners are cheap <$250/<$2. > > > > I suspect windows apps that copy everything over are halving the > > resolution, down-muxing the audio to stereo, or something similar. > > Hell, most of the time the movie alone, with _no_ audio is ~4.5GB. They > > gotta make cuts somewhere. > > > > I think a lot of developers are holding off on investing a lot of energy > > into compressing the whole dvd to 4.7GB, cause they see dual-layer > > burners on the horizon. So why not wait? > > > so this program automaticly knows what audio track to grab? cause i have > had problems with other programs in the past (dvd x copy) taking the > wrong track, say, french, and when i get around to watching the dvd the > entire thing is in french. which sucks. i could live without submenus, i > never watch them, and most of the time can do without the extras, its > just nice to have a professional looking copy when your done. It grabs the first audio track every time, unless you tell it otherwise. For all the dvd's in my collection, that's english. Don't have any experience with overseas dvds. If you don't insert a blank, it'll close after extraction and give you the command to enter to burn it. This way you can mplayer the .mpeg file to check for correctness before burning. Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, 01 Feb 2005 19:15:21 -0500, Nick Smith wrote: > > > im glad someone else brought this up, i have been meaning to for a > > > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with > > > one push of a button. > > > > Most commercial DVDs are dual layer and won't fit on a single layer > > DVD-R. To make an exact copy you need a dual layer burner and > > (expensive) dual layer discs. > > > the program automaticly transcodes the dvd and compresses it perfectly > to fit on a 4.7 (actually 4.4) gig dvd, with the highest possible > quality. OK, so it's not an EXACT copy. If you want to reduce the size of the data to fit 4.7GB (or 4.4 GiB if you prefer :) you have to discard something. You either reduce the quality of everything by a sizeable factor, or you discard some elements of the DVD and reduce the quality of the remainder by less. Programs like 9to5 take the latter approach, although an overall compression of the whole DVD is equally possible. -- Neil Bothwick To iterate is human; to recurse, divine. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Wed, 2005-02-02 at 01:31 +, Neil Bothwick wrote: > On Tue, 01 Feb 2005 19:15:21 -0500, Nick Smith wrote: > > > > > im glad someone else brought this up, i have been meaning to for a > > > > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with > > > > one push of a button. > > > > > > Most commercial DVDs are dual layer and won't fit on a single layer > > > DVD-R. To make an exact copy you need a dual layer burner and > > > (expensive) dual layer discs. > > > > > the program automaticly transcodes the dvd and compresses it perfectly > > to fit on a 4.7 (actually 4.4) gig dvd, with the highest possible > > quality. > > OK, so it's not an EXACT copy. If you want to reduce the size of the data > to fit 4.7GB (or 4.4 GiB if you prefer :) you have to discard something. > You either reduce the quality of everything by a sizeable factor, or you > discard some elements of the DVD and reduce the quality of the remainder > by less. Programs like 9to5 take the latter approach, although an overall > compression of the whole DVD is equally possible. > care to elaborate on how its possible? and with what? i wouldnt mind loosing somethings if when you first put the DVD in the player that it "looked" original even if the menu items didnt play.(the movie of course) something besides putting in the dvd and it just starts playing. > > -- > Neil Bothwick > > To iterate is human; to recurse, divine. > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Nick Smith ([EMAIL PROTECTED]) scribbled: > On Wed, 2005-02-02 at 01:31 +, Neil Bothwick wrote: > > On Tue, 01 Feb 2005 19:15:21 -0500, Nick Smith wrote: > > > > > > > im glad someone else brought this up, i have been meaning to for a > > > > > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with > > > > > one push of a button. > > > > > > > > Most commercial DVDs are dual layer and won't fit on a single layer > > > > DVD-R. To make an exact copy you need a dual layer burner and > > > > (expensive) dual layer discs. > > > > > > > the program automaticly transcodes the dvd and compresses it perfectly > > > to fit on a 4.7 (actually 4.4) gig dvd, with the highest possible > > > quality. > > > > OK, so it's not an EXACT copy. If you want to reduce the size of the data > > to fit 4.7GB (or 4.4 GiB if you prefer :) you have to discard something. > > You either reduce the quality of everything by a sizeable factor, or you > > discard some elements of the DVD and reduce the quality of the remainder > > by less. Programs like 9to5 take the latter approach, although an overall > > compression of the whole DVD is equally possible. > > > care to elaborate on how its possible? and with what? i wouldnt mind > loosing somethings if when you first put the DVD in the player that it > "looked" original even if the menu items didnt play.(the movie of > course) something besides putting in the dvd and it just starts playing. dvdunauthor. I would use it to extract the data off of the dvd, then use the guts of dvd9to5 to resize the movie, then dvdauthor to remaster. However, dvdunauthor is new and doesn't produce stable results last I checked. okay, dammit. I went and looked at dvdauthor. Latest stable is 0.5.0, masked is 0.6.10. I'm merging 0.6.10 now. I suppose I'll make an ebuild for dvd9to5 first, then tackle dvdunauthor... nag, nag, nag :) Not to mention I also looked at when I released 0.1.7, 06Jun2004. It's about time for an update. ;) Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, 2005-02-01 at 21:38 -0500, Jason Cooper wrote: > Nick Smith ([EMAIL PROTECTED]) scribbled: > > On Wed, 2005-02-02 at 01:31 +, Neil Bothwick wrote: > > > On Tue, 01 Feb 2005 19:15:21 -0500, Nick Smith wrote: > > > > > > > > > im glad someone else brought this up, i have been meaning to for a > > > > > > while. i use Intervideo DVD Copy, and it makes an EXACT copy, with > > > > > > one push of a button. > > > > > > > > > > Most commercial DVDs are dual layer and won't fit on a single layer > > > > > DVD-R. To make an exact copy you need a dual layer burner and > > > > > (expensive) dual layer discs. > > > > > > > > > the program automaticly transcodes the dvd and compresses it perfectly > > > > to fit on a 4.7 (actually 4.4) gig dvd, with the highest possible > > > > quality. > > > > > > OK, so it's not an EXACT copy. If you want to reduce the size of the data > > > to fit 4.7GB (or 4.4 GiB if you prefer :) you have to discard something. > > > You either reduce the quality of everything by a sizeable factor, or you > > > discard some elements of the DVD and reduce the quality of the remainder > > > by less. Programs like 9to5 take the latter approach, although an overall > > > compression of the whole DVD is equally possible. > > > > > care to elaborate on how its possible? and with what? i wouldnt mind > > loosing somethings if when you first put the DVD in the player that it > > "looked" original even if the menu items didnt play.(the movie of > > course) something besides putting in the dvd and it just starts playing. > > dvdunauthor. I would use it to extract the data off of the dvd, then > use the guts of dvd9to5 to resize the movie, then dvdauthor to remaster. > However, dvdunauthor is new and doesn't produce stable results last I > checked. > > okay, dammit. I went and looked at dvdauthor. Latest stable is 0.5.0, > masked is 0.6.10. I'm merging 0.6.10 now. I suppose I'll make an > ebuild for dvd9to5 first, then tackle dvdunauthor... nag, nag, nag :) > swt! ;-) > Not to mention I also looked at when I released 0.1.7, 06Jun2004. It's > about time for an update. ;) > > Cooper. > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Tue, Feb 01, 2005 at 09:38:14PM -0500, Jason Cooper wrote: > > [...] I suppose I'll make an ebuild for dvd9to5 first, > Sometime ago I have done an ebuild for dvd9to5. I am attaching it here, in case you want to take a look. It is really simple. Romildo # Copyright 1999-2004 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public License v2 # $Header: $ DESCRIPTION="Convert DVD-9 to DVD-5" HOMEPAGE="http://lakedaemon.netmindz.net/dvd9to5/"; SRC_URI="http://lakedaemon.netmindz.net/${PN}/${P}.tar.bz2"; LICENSE="GPL-2" SLOT="0" KEYWORDS="x86 sparc amd64 ~ppc" IUSE="" RDEPEND="dev-lang/perl media-video/transcode media-video/dvdauthor media-video/mjpegtools" src_install() { dobin dvd9to5.pl insinto /etc newins dvd9to5.conf.example dvd9to5.conf dodoc CHANGELOG COPYING INSTALL README TODO dvd9to5.conf.example } -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
[EMAIL PROTECTED] ([EMAIL PROTECTED]) scribbled: > On Tue, Feb 01, 2005 at 09:38:14PM -0500, Jason Cooper wrote: > > > > [...] I suppose I'll make an ebuild for dvd9to5 first, > > > > Sometime ago I have done an ebuild for dvd9to5. I am attaching > it here, in case you want to take a look. It is really simple. Cool, thanks! Did you put it in media-video/ or where? Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On Wed, Feb 02, 2005 at 06:07:08AM -0500, Jason Cooper wrote: > [EMAIL PROTECTED] ([EMAIL PROTECTED]) scribbled: > > On Tue, Feb 01, 2005 at 09:38:14PM -0500, Jason Cooper wrote: > > > > > > [...] I suppose I'll make an ebuild for dvd9to5 first, > > > > > > > Sometime ago I have done an ebuild for dvd9to5. I am attaching > > it here, in case you want to take a look. It is really simple. > > Cool, thanks! Did you put it in media-video/ or where? I have put it in media-video. Searching bugzilla, I have found bug #56002 http://bugs.gentoo.org/show_bug.cgi?id=56002 which also proposes an ebuild for dvd9to5. Romildo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On 2005-02-01 12:10, Jason Cooper <[EMAIL PROTECTED]> wrote: > > http://lakedaemon.netmindz.net/dvd9to5/ > > Let me know if you have any questions. Jason, the script is great! Pretty soon I'll have copies of all my DVDs and will no longer have to live in fear of the kids handling them! (The copies, anyway.) I am having a certain issue with some of the DVDs that I'm trying to copy. At the mplex stage, I get the message: **ERROR: [mplex] Need to split output but there appears to be no %d in the filename pattern movie.mpeg Much of the time, movie.mpeg seems to go all the way to the end of the credits (i.e., it looks done to me). So, a few questions... - You said you've copied a ~100 DVDs - have you seen this before? - Any ideas what I could do to avoid it? - Since movie.mpg looks done, is there some way to force dvd9to5 to continue processing anyway? Thanks! -- Luke -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
Luke Ravitch ([EMAIL PROTECTED]) scribbled: > On 2005-02-01 12:10, Jason Cooper <[EMAIL PROTECTED]> wrote: > > > > http://lakedaemon.netmindz.net/dvd9to5/ > > > > Let me know if you have any questions. > > Jason, the script is great! Pretty soon I'll have copies of all my > DVDs and will no longer have to live in fear of the kids handling > them! (The copies, anyway.) > > I am having a certain issue with some of the DVDs that I'm trying to > copy. At the mplex stage, I get the message: > > **ERROR: [mplex] Need to split output but there appears to be no > %d in the filename pattern movie.mpeg > > Much of the time, movie.mpeg seems to go all the way to the end of the > credits (i.e., it looks done to me). So, a few questions... > > - You said you've copied a ~100 DVDs - have you seen this before? > - Any ideas what I could do to avoid it? > - Since movie.mpg looks done, is there some way to force dvd9to5 > to continue processing anyway? Yep, I've run into it a few times, and had a few reports of it. Apparently it is a bug in mplex. I've tried adjusting the options passed to mplex to satisfy it, and nothing seems to work. What version of mplex are you using? Cooper. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] DVD ripping copying
On 2005-02-05 08:50, Jason Cooper <[EMAIL PROTECTED]> wrote: > What version of mplex are you using? mjpegtools mplex-2 version 1.6.2 (2.2.3) -- Luke -- gentoo-user@gentoo.org mailing list