Re: [gentoo-user] usb wacom tablet
On Tue, 2006-01-24 at 12:38 -0330, Roger Mason wrote: Hello, I'm installing a wacom tablet, following the instructions here: http://gentoo-wiki.com/HOWTO_Wacom_Tablet Problem: The tablet does not show up in /proc/bus/input/devices - cat /proc/bus/input/devices I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name=AT Translated Set 2 keyboard P: Phys=isa0060/serio0/input0 H: Handlers=kbd event0 B: EV=120013 B: KEY=4 200 3802078 f840d001 f2df ffef fffe B: MSC=10 B: LED=7 I: Bus=0011 Vendor=0002 Product=0001 Version=0001 N: Name=PS/2 Logitech Mouse P: Phys=isa0060/serio1/input0 H: Handlers=mouse0 event1 B: EV=7 B: KEY=7 0 0 0 0 0 0 0 0 B: REL=3 Background: The tablet is plugged into a NEC usb controller card. dmesg shows ehci_hcd :00:0a.2: NEC Corporation USB 2.0 ehci_hcd :00:0a.2: new USB bus registered, assigned bus number 1 ehci_hcd :00:0a.2: irq 11, io mem 0xe000 ehci_hcd :00:0a.2: park 0 ehci_hcd :00:0a.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected usbcore: registered new driver wacom drivers/usb/input/wacom.c: v1.43:USB Wacom Graphire and Wacom Intuos tablet driver The wacom driver is compiled into the kernel (last line of dmesg output, above) I have recompiled xorg with the sdk use flag and emerged linuxwacom-0.6.7. The following usb related kernel options are set: CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_WACOM=y CONFIG_USB_MON=y The following are the hotplug settings for the kernel: CONFIG_HOTPLUG=y # CONFIG_HOTPLUG_PCI is not set The kernel event detection stuff is built in: CONFIG_KOBJECT_UEVENT=y CONFIG_PREVENT_FIRMWARE_BUILD=y Can anyone suggest what may be wrong? Thanks, Roger Mason It doen't look like you have USB HID turned on in your kernel. Here is what I have for the USB portion of my kernel config: CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y CONFIG_USB_WACOM=m CONFIG_USB_EGALAX=m If that doesn't work, maybe try to plug it directly into the computer instead of the hub. I've had devices not like being plugged into a hub before. For what it's worth, here is what I have showing up in dmesg when I plug my tablet in: ohci_hcd :00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 2 input: Wacom Intuos2 6x8 on usb-:00:02.0-1 cat /proc/bus/input/devices shows this for the tablet: I: Bus=0003 Vendor=056a Product=0042 Version=0126 N: Name=Wacom Intuos2 6x8 P: Phys=usb-:00:02.0-1/input0 H: Handlers=mouse2 event4 B: EV=1f B: KEY=1cdf 0 1f 0 0 0 0 0 0 0 0 B: REL=100 B: ABS=f000163 B: MSC=1 Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] yet more ALSA trouble
On Sun, 2005-11-13 at 23:13 -0800, Phil Thomson wrote: Hi, Reading the archives, I noticed there's been a long thread on ALSA trouble, so I hesitate to post a similar problem, but following the relevant steps outlined in that thread so far hasn't seemed to help my own problem with ALSA. I've been trying to get ALSA working with my Nvidia nForce2 AC97 onboard sound card, but without much luck. GentooBoxGuy ~ # lspci | grep audio :00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) for which the ALSA soundcard matrix says intel8x0 is the appropriate driver. Here's lsmod | grep snd: snd_seq34192 0 snd_seq_device 4876 1 snd_seq snd_pcm_oss37184 0 snd_mixer_oss 12992 1 snd_pcm_oss snd_intel8x0 21664 0 snd_ac97_codec 52440 1 snd_intel8x0 snd_pcm53572 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd_timer 15972 2 snd_seq,snd_pcm snd32004 8 snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer snd_page_alloc 5604 2 snd_intel8x0,snd_pcm GentooBoxGuy ~ # cat /etc/modules.d/alsa # Alsa 0.9.X kernel modules' configuration file. # $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $ # ALSA portion # OSS/Free portion ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-1 snd-ens1371 ## OSS/Free portion ## alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.9a --- alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-intel8x0 # --- END: Generated by ALSACONF, do not edit. --- /proc/asound/cards has nothing in it. I have a nForce2 board as well, here is what I have. [EMAIL PROTECTED] ~ $ lsmod | grep snd snd_intel8x0 29696 1 snd_ac97_codec 82428 1 snd_intel8x0 [EMAIL PROTECTED] ~ $ cat /etc/modules.d/alsa # Alsa 0.9.X kernel modules' configuration file. # $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.1 2003/08/05 21:07:55 johnm Exp $ # ALSA portion alias char-major-116 snd # OSS/Free portion alias char-major-14 soundcore ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-0 snd-interwave ## alias snd-card-1 snd-ens1371 alias snd-card-0 snd-intel8x0 ## OSS/Free portion alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. options snd cards_limit=1 [EMAIL PROTECTED] ~ $ cat /proc/asound/cards 0 [nForce2]: NFORCE - NVidia nForce2 NVidia nForce2 with ALC650F at 0xe508, irq 19 Not sure that helps or not, but it looks like there are a few things missing from your config. Specifically this section: # ALSA portion alias char-major-116 snd # OSS/Free portion alias char-major-14 soundcore Hope that helps, Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Sound Servers and Such
On Thu, 2005-10-13 at 23:24 -0400, Michael Crute wrote: On 10/13/05, Robert Morris [EMAIL PROTECTED] wrote: It's the gstreamer-alsa plugin that is probably causing the crackle. There are several bug reports in Gnome bugzilla. If you are using dmix, you might want to look at this one: http://bugzilla.gnome.org/show_bug.cgi?id=314689 There are a few others, but the general solution is to either downgrade the gstreamer-alsa plugin or switch to using OSS instead of ALSA (which is what I did). If want to do this in Gnome, go to the Multimedia Systems Selector in the preferences menu, and switch the Default Output Sink to OSS. OSS does it too, even worse than ESD. The only one that seems clean is ALSA. Now I guess my next question would have to be is there a way to remove the dmix middleman and still get software based mixing? Also would putting in Jack potentially fix the problem? -Mike I've never used Jack, so I am not sure if that's a solution or not. When you switch from ESD to OSS, did you still have /etc/init.d/esound running? You may need to stop that service in order to make sure it is completely out of the loop when you try and use OSS (not 100% sure on this though). There is also a thread on the forums with some options here: http://forums.gentoo.org/viewtopic-t-347016.html Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Sound Servers and Such
On Thu, 2005-10-13 at 12:48 -0400, Michael Crute wrote: First I think I should start out saying that I don't have too much of a clue when it comes to Linux audio. Now that that's out of the way, I have a box that works at the moment with ALSA + ESD + Gstreamer + Gnome that allows me to do software mixing and all my sound works. The problem I am having is that I have this constant crackle when I'm listening to anything. I know its not EMF because the sound was clean when I had Windoze on the box. Its not so loud that it makes listening to anything unpleasant but it is quite annoying. Does anyone have any suggestions on how to correct this? I saw on some of the newsgroups that people say this is an ESD issue but nobody seems to have a good solution. The card is some on board Intel High Def audio thing that Albatron ships with their mobos (can get specifics if needed). Any help would be appreciated. -Mike It's the gstreamer-alsa plugin that is probably causing the crackle. There are several bug reports in Gnome bugzilla. If you are using dmix, you might want to look at this one: http://bugzilla.gnome.org/show_bug.cgi?id=314689 There are a few others, but the general solution is to either downgrade the gstreamer-alsa plugin or switch to using OSS instead of ALSA (which is what I did). If want to do this in Gnome, go to the Multimedia Systems Selector in the preferences menu, and switch the Default Output Sink to OSS. Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] nvidia drivers and glx
On Mon, 2005-04-25 at 15:00 -0400, Mike Markowski wrote: Bruno Lustosa wrote on 04/25/05 12:40 ET: Hello. After some update, the GLX extensions stopped working. I noticed it because opengl xscreensavers would just segfault. After I quit X and tried to restart it, I would get a segfault when trying to load the glx extension. [...] I noticed this Saturday morning after doing a Friday night update (Athlon 2600+, nvidia video). FWIW, the errors I see on my ~x86 set up are below. I haven't had a chance to start tracking it down yet... Mike I had this too. I believe its the permissions being changed by/for PAM. Check to make sure you are in the video group. Add your user to it if you're not. That fixed it for me. Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: System time drift problem
On Tue, 2005-04-19 at 15:27 +0200, Frédéric Grosshans wrote: Le mardi 19 avril 2005 à 09:09 +0930, Iain Buchanan a écrit : are you sure this doesn't answer your question? It solved my system clock drift (which was about 30 minutes a day, but hw clock was ok). I know adjtime is used to correct inaccurate hwclocks, but it can get stuffed. post your /etc/adjtime and see what it says... I've already played with it / deleted it and it doesn't seem to change anything. My current /etc/adjtime is 0.00 1113497480 0.00 1113497480 LOCAL and didn't prevent any drift -- Frédéric Grosshans [EMAIL PROTECTED] I am having the same problem here too. I still haven't sorted out the cause, but judging from the number of people having this problem recently, I would say that some library/program (or maybe config file?) was changed recently to cause this. All I know is, I only started having this problem recently after an update. Up until then, my clock stayed fairly accurate. Just for the record, here is my /etc/adjtime: 0.00 1112675669 0.00 1112675669 LOCAL Robert -- gentoo-user@gentoo.org mailing list