Re: [gentoo-user] [OT] Is that possible or nonsense (3D-Printing via WiFi) ?
On 03/09/18 05:50, J. Roeleveld wrote: If the printer requires a near constant stream of data over the USB port, you might want to look into a physical cable instead of wifi for the communication. And DON'T hang ANYTHING else on USB (except, of course, the keyboard and mouse). Actually, if you've got separate USB-1, -2, and -3 ports, make sure it's the only thing on the -3 ports. Sharing devices on a hub (and a lot of mobos have internal hubs so you don't know if ports are shared or not) can cause all sorts of grief if you're unlucky. Cheers, Wol
Re: [gentoo-user] [OT] Is that possible or nonsense (3D-Printing via WiFi) ?
On September 2, 2018 10:17:26 AM UTC, tu...@posteo.de wrote: >On 09/02 11:05, Mick wrote: >> On Sunday, 2 September 2018 07:35:07 BST tu...@posteo.de wrote: >> > Hi, >> > >> > my 3D-orinter is in another room and I want to check its progress >> > more often than to go to the next room to check it... :) >> > >> > My Rasperberry Pi Zero W is technically able to connect to the >printer >> > via USB and it is possible to connect via WiFi to the Rasperberry >in >> > the "next room" from "this room". >> > >> > This way I am able to flash the firmware of the printer. >> > >> > There is OctoPrint to do the kind of stuff I want...but >> > it is (for me) to feature rich and I think my Rasperberry >> > is a little bit weak CPU-wise. >> > >> > Is it possible to "forward" the USB-port on my Rasperberry via Wifi >> > so I can do all software related stuff on my PC ? >> > >> > Cheers! >> > Meino >> >> You probably want to take a look at enabling: >> >> CONFIG_USBIP_CORE >> >> Then have a look at your: >> >> /usr/src/linux/Documentation/usb/usbip_protocol.txt >> >> -- >> Regards, >> Mick > >Hi Mick, > >thanks a lot for your info ... looks promising! :) > >I will check that! > >Have a nice weekend! >Cheers! >Meino If the printer requires a near constant stream of data over the USB port, you might want to look into a physical cable instead of wifi for the communication. -- Joost -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: [gentoo-user] [OT] Is that possible or nonsense (3D-Printing via WiFi) ?
On 09/02 11:05, Mick wrote: > On Sunday, 2 September 2018 07:35:07 BST tu...@posteo.de wrote: > > Hi, > > > > my 3D-orinter is in another room and I want to check its progress > > more often than to go to the next room to check it... :) > > > > My Rasperberry Pi Zero W is technically able to connect to the printer > > via USB and it is possible to connect via WiFi to the Rasperberry in > > the "next room" from "this room". > > > > This way I am able to flash the firmware of the printer. > > > > There is OctoPrint to do the kind of stuff I want...but > > it is (for me) to feature rich and I think my Rasperberry > > is a little bit weak CPU-wise. > > > > Is it possible to "forward" the USB-port on my Rasperberry via Wifi > > so I can do all software related stuff on my PC ? > > > > Cheers! > > Meino > > You probably want to take a look at enabling: > > CONFIG_USBIP_CORE > > Then have a look at your: > > /usr/src/linux/Documentation/usb/usbip_protocol.txt > > -- > Regards, > Mick Hi Mick, thanks a lot for your info ... looks promising! :) I will check that! Have a nice weekend! Cheers! Meino
Re: [gentoo-user] [OT] Is that possible or nonsense (3D-Printing via WiFi) ?
On Sunday, 2 September 2018 07:35:07 BST tu...@posteo.de wrote: > Hi, > > my 3D-orinter is in another room and I want to check its progress > more often than to go to the next room to check it... :) > > My Rasperberry Pi Zero W is technically able to connect to the printer > via USB and it is possible to connect via WiFi to the Rasperberry in > the "next room" from "this room". > > This way I am able to flash the firmware of the printer. > > There is OctoPrint to do the kind of stuff I want...but > it is (for me) to feature rich and I think my Rasperberry > is a little bit weak CPU-wise. > > Is it possible to "forward" the USB-port on my Rasperberry via Wifi > so I can do all software related stuff on my PC ? > > Cheers! > Meino You probably want to take a look at enabling: CONFIG_USBIP_CORE Then have a look at your: /usr/src/linux/Documentation/usb/usbip_protocol.txt -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] [OT] Is that possible or nonsense (3D-Printing via WiFi) ?
Hi, my 3D-orinter is in another room and I want to check its progress more often than to go to the next room to check it... :) My Rasperberry Pi Zero W is technically able to connect to the printer via USB and it is possible to connect via WiFi to the Rasperberry in the "next room" from "this room". This way I am able to flash the firmware of the printer. There is OctoPrint to do the kind of stuff I want...but it is (for me) to feature rich and I think my Rasperberry is a little bit weak CPU-wise. Is it possible to "forward" the USB-port on my Rasperberry via Wifi so I can do all software related stuff on my PC ? Cheers! Meino