Re: [gentoo-user] Need help with pvrusb2 [SOLVED]
Am 24.10.2011 03:15, schrieb Michael Sullivan: > On 10/23/11 18:15, Neil Bothwick wrote: >> On Sun, 23 Oct 2011 18:00:52 -0500, Michael Sullivan wrote: >> > pvrusb2: request_firmware unable to locate fx2 controller file > v4l-pvrusb2-73xxx-01.fw Is this file present in /lib/firmware? >> >>> Nope: >> >> It should be obvious that this needs to be addressed before anything >> else. [...] >> > > I downloaded that file and rebooted and dmesg griped about another file > and I found it and downloaded it and rebooted and now my output looks > like this, which I'm happy with: > > [...] > > Speaking of which, isn't there an easier way to reload modules than > rebooting? When I started using Gentoo in 2004, there was an > /etc/init.d/hotplug, which was replaced by /etc/init.d/coldplug, but > neither one seems to be present anymore on the system. What service > loads modules on bootup now? > You mean like `modprobe -vr pvrusb2 && modprobe -v pvrusb2`? I joined Gentoo in 2006 so I'm not sure if that is what you mean. It doesn't help much with pvrusb2, anyway ... (but you can still try) signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Need help with pvrusb2 [SOLVED]
On 10/23/11 18:15, Neil Bothwick wrote: > On Sun, 23 Oct 2011 18:00:52 -0500, Michael Sullivan wrote: > pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw >>> >>> Is this file present in /lib/firmware? > >> Nope: > > It should be obvious that this needs to be addressed before anything > else. > >> How do I get that file? > > Putting the filename into Google gave me those instructions in the first > link. > > I downloaded that file and rebooted and dmesg griped about another file and I found it and downloaded it and rebooted and now my output looks like this, which I'm happy with: michael@carter ~ $ dmesg | grep -i pvrusb2 pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71. pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70. cx25840 2-0044: cx25843-24 found @ 0x88 (pvrusb2_a) pvrusb2: Attached sub-driver cx25840 pvrusb2: Attached sub-driver tuner pvrusb2: Supported video standard(s) reported available in hardware: PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB pvrusb2: Mapping standards mask=0x300b700 (PAL-M/N/Nc;NTSC-M/Mj/Mk;ATSC-8VSB/16VSB) pvrusb2: Setting up 6 unique standard(s) pvrusb2: Set up standard idx=0 name=PAL-M pvrusb2: Set up standard idx=1 name=PAL-N pvrusb2: Set up standard idx=2 name=PAL-Nc pvrusb2: Set up standard idx=3 name=NTSC-M pvrusb2: Set up standard idx=4 name=NTSC-Mj pvrusb2: Set up standard idx=5 name=NTSC-Mk pvrusb2: Initial video standard (determined by device type): NTSC-M pvrusb2: Device initialization completed successfully. pvrusb2: registered device video0 [mpeg] DVB: registering new adapter (pvrusb2-dvb) Speaking of which, isn't there an easier way to reload modules than rebooting? When I started using Gentoo in 2004, there was an /etc/init.d/hotplug, which was replaced by /etc/init.d/coldplug, but neither one seems to be present anymore on the system. What service loads modules on bootup now?
Re: [gentoo-user] Need help with pvrusb2
On 10/23/11 18:15, Neil Bothwick wrote: > On Sun, 23 Oct 2011 18:00:52 -0500, Michael Sullivan wrote: > pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw >>> >>> Is this file present in /lib/firmware? > >> Nope: > > It should be obvious that this needs to be addressed before anything > else. > >> How do I get that file? > > Putting the filename into Google gave me those instructions in the first > link. > > OK I've got the file: michael@carter /lib/firmware $ ls v4l-pvrusb2-73xxx-01.fw v4l-pvrusb2-73xxx-01.fw It's still giving me the same errors though: michael@carter /lib/firmware $ dmesg | grep pvrusb pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) pvrusb2: ***WARNING*** Device fx2 controller firmware seems to be missing. pvrusb2: Did you install the pvrusb2 firmware files in their proper location? pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw pvrusb2: Failure uploading firmware1 pvrusb2: Device initialization was not successful. pvrusb2: Giving up since device microcontroller firmware appears to be missing.
Re: [gentoo-user] Need help with pvrusb2
On Sun, 23 Oct 2011 18:00:52 -0500, Michael Sullivan wrote: > >> pvrusb2: request_firmware unable to locate fx2 controller file > >> v4l-pvrusb2-73xxx-01.fw > > > > Is this file present in /lib/firmware? > Nope: It should be obvious that this needs to be addressed before anything else. > How do I get that file? Putting the filename into Google gave me those instructions in the first link. -- Neil Bothwick Rainbows are just to look at, not to really understand. signature.asc Description: PGP signature
Re: [gentoo-user] Need help with pvrusb2
On 10/23/11 17:48, Neil Bothwick wrote: > On Sun, 23 Oct 2011 16:36:41 -0500, Michael Sullivan wrote: > >> pvrusb2: request_firmware unable to locate fx2 controller file >> v4l-pvrusb2-73xxx-01.fw > > Is this file present in /lib/firmware? > > Nope: michael@carter ~ $ ls /lib/firmware 3com cpia2 ess mts_gsm.fw ti_3410.fwvicam acenic cxgb3 kaweth ositech ti_5052.fw whiteheat.fw adaptec dabusbkeyspan_pda qlogic tigon whiteheat_loader.fw advansys e100 korg r128tr_smctr.bin yamaha atmsar11.fw edgeport matrox radeon ttusb-budget bnx2 emi26 mts_cdma.fw sun v4l-cx25840.fw cis emi62 mts_edge.fw tehuti v4l-cx25840.fw.1 How do I get that file?
Re: [gentoo-user] Need help with pvrusb2
On Sun, 23 Oct 2011 16:36:41 -0500, Michael Sullivan wrote: > pvrusb2: request_firmware unable to locate fx2 controller file > v4l-pvrusb2-73xxx-01.fw Is this file present in /lib/firmware? -- Neil Bothwick UNILINGUAL: American. signature.asc Description: PGP signature
Re: [gentoo-user] Need help with pvrusb2
On 10/23/11 16:52, Florian Philipp wrote: > Am 23.10.2011 23:36, schrieb Michael Sullivan: >> Hello. I recently purchased a Hauppauge WinTV-HVR external TV card. >> I'm trying to get it to work with Gentoo Linux. I think I've followed >> the steps found at >> http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900 correctly, >> but I'm still getting errors. When I plug the TV card into the USB slot >> in the back of the computer and search dmesg, it says: >> > [...] >> >> >> I've emerged linuxtv-dvb-firmware and reissued the above command with no >> change. How do I get Gentoo to recognize this card? >> -Michael Sullivan- >> > > Try media-tv/ivtv-firmware. For some reason, that works better for me. > And also media-tv/ivtv-utils. > > BTW: If your HVR behaves the same as my old PVR2, it can sometimes help > to suspend and wake the system to get it working. > OK. I restarted the computer. (I have never suspended that computer before and was unsure of what would happen, but I did not realize at the time that my the game running on my wife's computer was using a samba share that would be disrupted.) I had no luck with ivtv-firmware, so I have reinstalled linuxtv-dvb-firmware-2009.09.19. Now the output of dmesg has changed somewhat: michael@carter ~ $ dmesg | grep -i pvr pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) pvrusb2: ***WARNING*** Device fx2 controller firmware seems to be missing. pvrusb2: Did you install the pvrusb2 firmware files in their proper location? pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw pvrusb2: Failure uploading firmware1 pvrusb2: Device initialization was not successful. pvrusb2: Giving up since device microcontroller firmware appears to be missing. Does this help?
Re: [gentoo-user] Need help with pvrusb2
On 10/23/11 16:52, Florian Philipp wrote: > Am 23.10.2011 23:36, schrieb Michael Sullivan: >> Hello. I recently purchased a Hauppauge WinTV-HVR external TV card. >> I'm trying to get it to work with Gentoo Linux. I think I've followed >> the steps found at >> http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900 correctly, >> but I'm still getting errors. When I plug the TV card into the USB slot >> in the back of the computer and search dmesg, it says: >> > [...] >> >> >> I've emerged linuxtv-dvb-firmware and reissued the above command with no >> change. How do I get Gentoo to recognize this card? >> -Michael Sullivan- >> > > Try media-tv/ivtv-firmware. For some reason, that works better for me. > And also media-tv/ivtv-utils. > > BTW: If your HVR behaves the same as my old PVR2, it can sometimes help > to suspend and wake the system to get it working. > I suspended the system, but now I can't wake it up again! I hit the power button, and I heard a sound through the speakers similar to an error sound. I would say a barb sound, but I doubt any of you would be able to make sense of it. The only visual output of that computer is a video output component going to the TV set. I work on that computer through ssh from another one in another room. Should I just restart it manually? If not, how do I wake it up?
Re: [gentoo-user] Need help with pvrusb2
Am 23.10.2011 23:36, schrieb Michael Sullivan: > Hello. I recently purchased a Hauppauge WinTV-HVR external TV card. > I'm trying to get it to work with Gentoo Linux. I think I've followed > the steps found at > http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900 correctly, > but I'm still getting errors. When I plug the TV card into the USB slot > in the back of the computer and search dmesg, it says: > [...] > > > I've emerged linuxtv-dvb-firmware and reissued the above command with no > change. How do I get Gentoo to recognize this card? > -Michael Sullivan- > Try media-tv/ivtv-firmware. For some reason, that works better for me. And also media-tv/ivtv-utils. BTW: If your HVR behaves the same as my old PVR2, it can sometimes help to suspend and wake the system to get it working. signature.asc Description: OpenPGP digital signature
[gentoo-user] Need help with pvrusb2
Hello. I recently purchased a Hauppauge WinTV-HVR external TV card. I'm trying to get it to work with Gentoo Linux. I think I've followed the steps found at http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1900 correctly, but I'm still getting errors. When I plug the TV card into the USB slot in the back of the computer and search dmesg, it says: michael@carter /lib/firmware $ dmesg | grep pvrusb2 pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx usbcore: registered new interface driver pvrusb2 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) pvrusb2: ***WARNING*** Device fx2 controller firmware seems to be missing. pvrusb2: Did you install the pvrusb2 firmware files in their proper location? pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw pvrusb2: Failure uploading firmware1 pvrusb2: Device initialization was not successful. pvrusb2: Giving up since device microcontroller firmware appears to be missing. pvrusb2: Device being rendered inoperable pvrusb2: Hardware description: WinTV HVR-1950 Model 751xx pvrusb2: ***WARNING*** Device fx2 controller firmware seems to be missing. pvrusb2: Did you install the pvrusb2 firmware files in their proper location? pvrusb2: request_firmware unable to locate fx2 controller file v4l-pvrusb2-73xxx-01.fw pvrusb2: Failure uploading firmware1 pvrusb2: Device initialization was not successful. pvrusb2: Giving up since device microcontroller firmware appears to be missing. I've emerged linuxtv-dvb-firmware and reissued the above command with no change. How do I get Gentoo to recognize this card? -Michael Sullivan-