Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-17 Thread thelma 
On 02/17/2017 02:31 PM, Fernando Rodriguez wrote:
> On 02/12/2017 12:59 PM, the...@sys-concept.com wrote:
>> On 02/12/2017 04:26 AM, Adam Carter wrote:
>>> On Sun, Feb 12, 2017 at 7:07 PM, >> > wrote:
>>>
>>> On 02/12/2017 01:01 AM, the...@sys-concept.com
>>>  wrote:
>>> > My local network is 10.0.0.1 -
>>> >
>>> > I have an external device that is pre-set from factory to 
>>> 192.168.1.100 and I need to access to it via browser to change its network 
>>> setting.
>>> > So I do:
>>> > ifconfig net0:1 192.168.1.1 up
>>> >
>>> > nmap -sn 192.168.1.1/24 
>>> >
>>> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
>>> > Nmap scan report for 192.168.1.100
>>> > Host is up (0.00015s latency).
>>> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
>>> > Nmap scan report for 192.168.1.1
>>> > Host is up.
>>> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
>>> >
>>> > The device is showing up but I can not ping it, 100% packet loss.
>>>
>>> ifconfig is showing:
>>>
[snip]
> Try 12345678 and read the manual [1] (I think this is it).
> Try the phone keypad configuration method to set the ip.
> 
> [1]
> http://www.palmmicro.com/pa1688/download/us_pdf/PA168VSIPFXSGWUserguideEng.pdf

The access was:
user: root
password: test

But this device is poorly constructed. I was not able to register it
with asterisk.

--
Thelma

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-17 Thread Fernando Rodriguez 
On 02/12/2017 12:59 PM, the...@sys-concept.com wrote:
> On 02/12/2017 04:26 AM, Adam Carter wrote:
>> On Sun, Feb 12, 2017 at 7:07 PM, > > wrote:
>>
>> On 02/12/2017 01:01 AM, the...@sys-concept.com
>>  wrote:
>> > My local network is 10.0.0.1 -
>> >
>> > I have an external device that is pre-set from factory to 
>> 192.168.1.100 and I need to access to it via browser to change its network 
>> setting.
>> > So I do:
>> > ifconfig net0:1 192.168.1.1 up
>> >
>> > nmap -sn 192.168.1.1/24 
>> >
>> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
>> > Nmap scan report for 192.168.1.100
>> > Host is up (0.00015s latency).
>> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
>> > Nmap scan report for 192.168.1.1
>> > Host is up.
>> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
>> >
>> > The device is showing up but I can not ping it, 100% packet loss.
>>
>> ifconfig is showing:
>>
>> net0:1: flags=4163  mtu 1500
>> inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
>> ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
>> device interrupt 16  memory 0xfddc-fdde
>>
>>
>> Are both 192.168.1 devices on the same layer 2 segment (if not it wont
>> work).
>>
>> arp -a will show if the IP address was resolvable to a MAC address, If
>> it says  you have a layer two problem.
> 
> Thank you all for your input.
> 
> The device is a tiny PA168V phone gateway. I was able to connect to via
> browser interface but it had a password set in (which I don't have it
> anymore). So I decided to reset to factory default and its factory
> default IP is 192.168.1.100
> 
> The device has a WAN and LAN line.
> 
> When I reset it according to their instructions I on line line get and
> IP as 192.168.1.100
> but there are no ports open.
> 
> nmap -A -T4 -Pn -vvv 192.168.1.100
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 10:46 MST
> NSE: Loaded 118 scripts for scanning.
> NSE: Script Pre-scanning.
> NSE: Starting runlevel 1 (of 2) scan.
> NSE: Starting runlevel 2 (of 2) scan.
> Initiating ARP Ping Scan at 10:46
> Scanning 192.168.1.100 [1 port]
> Completed ARP Ping Scan at 10:46, 0.21s elapsed (1 total hosts)
> Initiating Parallel DNS resolution of 1 host. at 10:46
> Completed Parallel DNS resolution of 1 host. at 10:46, 0.00s elapsed
> DNS resolution of 1 IPs took 0.00s. Mode: Async [#: 1, OK: 0, NX: 1, DR:
> 0, SF: 0, TR: 1, CN: 0]
> Initiating SYN Stealth Scan at 10:46
> Scanning 192.168.1.100 [1000 ports]
> Completed SYN Stealth Scan at 10:47, 21.07s elapsed (1000 total ports)
> Initiating Service scan at 10:47
> Initiating OS detection (try #1) against 192.168.1.100
> Retrying OS detection (try #2) against 192.168.1.100
> NSE: Script scanning 192.168.1.100.
> NSE: Starting runlevel 1 (of 2) scan.
> Initiating NSE at 10:47
> Completed NSE at 10:47, 0.00s elapsed
> NSE: Starting runlevel 2 (of 2) scan.
> Nmap scan report for 192.168.1.100
> Host is up (0.00012s latency).
> All 1000 scanned ports on 192.168.1.100 are filtered
> MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> Too many fingerprints match this host to give specific OS details
> TCP/IP fingerprint:
> SCAN(V=6.47%E=4%D=2/12%OT=%CT=%CU=%PV=Y%DS=1%DC=D%G=N%M=000945%TM=58A09F9F%P=x86_64-pc-linux-gnu)
> U1(R=N)
> IE(R=N)
> 
> Network Distance: 1 hop
> 
> TRACEROUTE
> HOP RTT ADDRESS
> 1 0.12 ms 192.168.1.100
> 
> NSE: Script Post-scanning.
> NSE: Starting runlevel 1 (of 2) scan.
> NSE: Starting runlevel 2 (of 2) scan.
> Read data files from: /usr/bin/../share/nmap
> OS and Service detection performed. Please report any incorrect results
> at http://nmap.org/submit/ .
> Nmap done: 1 IP address (1 host up) scanned in 24.38 seconds
> 
> ---
> arp -a
> 
> ? (192.168.0.100) at  on net0
> DD-WRT (10.0.0.1) at 90:e6:ba:2e:ec:5c [ether] on net0
> ? (192.168.1.100) at 00:09:45:41:73:d1 [ether] on net0
> ? (192.168.1.1) at  on net0
> ? (10.0.0.135) at 38:d5:47:7e:61:52 [ether] on net0
> VOIP_TA1S1O (10.0.0.131) at 00:09:45:41:73:d1 [ether] on net0
> SipuraSPA (10.0.0.118) at 00:0e:08:ca:17:b3 [ether] on net0
> -
> 
> When I boot and try WAN port the device gets two local IP from DHCP, and
> I see two ports open on IP: 10.0.0.131 (WAN)
> 
> 23/tcp open  telnet?
> 80/tcp open  http
> 
> But I need to ask the manufacture what is the password, the default
> suppose be be: 1234
> Maybe I didn't reset it completely

Try 12345678 and read the manual [1] (I think this is it).
Try the phone keypad configuration method to set the ip.

[1]
http://www.palmmicro.com/pa1688/download/us_pdf/PA168VSIPFXSGWUserguideEng.pdf

> 
> --
> Thelma
> 


-- 

Fernando Rodriguez

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread Adam Carter 
>
> ---
> arp -a
>
> ? (192.168.0.100) at  on net0
> DD-WRT (10.0.0.1) at 90:e6:ba:2e:ec:5c [ether] on net0
> ? (192.168.1.100) at 00:09:45:41:73:d1 [ether] on net0
>

This shows that the IP is correct and communication may be possible.


> When I boot and try WAN port the device gets two local IP from DHCP, and
> I see two ports open on IP: 10.0.0.131 (WAN)
>
> 23/tcp open  telnet?
> 80/tcp open  http
>
> But I need to ask the manufacture what is the password, the default
> suppose be be: 1234
> Maybe I didn't reset it completely
>
>
Ok, so you tried telnet and web to 10.0.0.131 both of which connected, but
using the default username and password failed, right? If so, that does
sound like it hasnt been reset.

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread Mick 
On Sunday 12 Feb 2017 10:59:38 the...@sys-concept.com wrote:
> On 02/12/2017 04:26 AM, Adam Carter wrote:
> > On Sun, Feb 12, 2017 at 7:07 PM,  > 
> > > wrote:
> > On 02/12/2017 01:01 AM, the...@sys-concept.com
> > 
> >  wrote:
> > > My local network is 10.0.0.1 -
> > > 
> > > I have an external device that is pre-set from factory to
> > > 192.168.1.100 and I need to access to it via browser to change its
> > > network setting. So I do:
> > > ifconfig net0:1 192.168.1.1 up
> > > 
> > > nmap -sn 192.168.1.1/24 
> > > 
> > > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> > > Nmap scan report for 192.168.1.100
> > > Host is up (0.00015s latency).
> > > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> > > Nmap scan report for 192.168.1.1
> > > Host is up.
> > > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> > > 
> > > The device is showing up but I can not ping it, 100% packet loss.
> > 
> > ifconfig is showing:
> > 
> > net0:1: flags=4163  mtu 1500
> > 
> > inet 192.168.1.1  netmask 255.255.255.0  broadcast
> > 192.168.1.255
> > ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
> > device interrupt 16  memory 0xfddc-fdde
> > 
> > Are both 192.168.1 devices on the same layer 2 segment (if not it wont
> > work).
> > 
> > arp -a will show if the IP address was resolvable to a MAC address, If
> > it says  you have a layer two problem.
> 
> Thank you all for your input.
> 
> The device is a tiny PA168V phone gateway. I was able to connect to via
> browser interface but it had a password set in (which I don't have it
> anymore). So I decided to reset to factory default and its factory
> default IP is 192.168.1.100
> 
> The device has a WAN and LAN line.
> 
> When I reset it according to their instructions I on line line get and
> IP as 192.168.1.100
> but there are no ports open.
> 
> nmap -A -T4 -Pn -vvv 192.168.1.100
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 10:46 MST
> NSE: Loaded 118 scripts for scanning.
> NSE: Script Pre-scanning.
> NSE: Starting runlevel 1 (of 2) scan.
> NSE: Starting runlevel 2 (of 2) scan.
> Initiating ARP Ping Scan at 10:46
> Scanning 192.168.1.100 [1 port]
> Completed ARP Ping Scan at 10:46, 0.21s elapsed (1 total hosts)
> Initiating Parallel DNS resolution of 1 host. at 10:46
> Completed Parallel DNS resolution of 1 host. at 10:46, 0.00s elapsed
> DNS resolution of 1 IPs took 0.00s. Mode: Async [#: 1, OK: 0, NX: 1, DR:
> 0, SF: 0, TR: 1, CN: 0]
> Initiating SYN Stealth Scan at 10:46
> Scanning 192.168.1.100 [1000 ports]
> Completed SYN Stealth Scan at 10:47, 21.07s elapsed (1000 total ports)
> Initiating Service scan at 10:47
> Initiating OS detection (try #1) against 192.168.1.100
> Retrying OS detection (try #2) against 192.168.1.100
> NSE: Script scanning 192.168.1.100.
> NSE: Starting runlevel 1 (of 2) scan.
> Initiating NSE at 10:47
> Completed NSE at 10:47, 0.00s elapsed
> NSE: Starting runlevel 2 (of 2) scan.
> Nmap scan report for 192.168.1.100
> Host is up (0.00012s latency).
> All 1000 scanned ports on 192.168.1.100 are filtered

It's running a firewall and/or there are no ports open and it does not return 
any packets to confirm so.


> MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> Too many fingerprints match this host to give specific OS details
> TCP/IP fingerprint:
> SCAN(V=6.47%E=4%D=2/12%OT=%CT=%CU=%PV=Y%DS=1%DC=D%G=N%M=000945%TM=58A09F9F%P
> =x86_64-pc-linux-gnu) U1(R=N)
> IE(R=N)
> 
> Network Distance: 1 hop
> 
> TRACEROUTE
> HOP RTT ADDRESS
> 1 0.12 ms 192.168.1.100
> 
> NSE: Script Post-scanning.
> NSE: Starting runlevel 1 (of 2) scan.
> NSE: Starting runlevel 2 (of 2) scan.
> Read data files from: /usr/bin/../share/nmap
> OS and Service detection performed. Please report any incorrect results
> at http://nmap.org/submit/ .
> Nmap done: 1 IP address (1 host up) scanned in 24.38 seconds
> 
> ---
> arp -a
> 
> ? (192.168.0.100) at  on net0
> DD-WRT (10.0.0.1) at 90:e6:ba:2e:ec:5c [ether] on net0
> ? (192.168.1.100) at 00:09:45:41:73:d1 [ether] on net0
> ? (192.168.1.1) at  on net0
> ? (10.0.0.135) at 38:d5:47:7e:61:52 [ether] on net0
> VOIP_TA1S1O (10.0.0.131) at 00:09:45:41:73:d1 [ether] on net0
> SipuraSPA (10.0.0.118) at 00:0e:08:ca:17:b3 [ether] on net0
> -
> 
> When I boot and try WAN port the device gets two local IP from DHCP, and
> I see two ports open on IP: 10.0.0.131 (WAN)
> 
> 23/tcp open  telnet?
> 80/tcp open  http
> 
> But I need to ask the manufacture what is the password, the default
> suppose be be: 1234
> Maybe I didn't reset it completely
> 
> --
> Thelma


Assuming you have the basics right (IP address, login username and passwd) you 
can try to flash the device with the latest firmware before you try to

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread thelma 
On 02/12/2017 04:26 AM, Adam Carter wrote:
> On Sun, Feb 12, 2017 at 7:07 PM,  > wrote:
> 
> On 02/12/2017 01:01 AM, the...@sys-concept.com
>  wrote:
> > My local network is 10.0.0.1 -
> >
> > I have an external device that is pre-set from factory to 192.168.1.100 
> and I need to access to it via browser to change its network setting.
> > So I do:
> > ifconfig net0:1 192.168.1.1 up
> >
> > nmap -sn 192.168.1.1/24 
> >
> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> > Nmap scan report for 192.168.1.100
> > Host is up (0.00015s latency).
> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> > Nmap scan report for 192.168.1.1
> > Host is up.
> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> >
> > The device is showing up but I can not ping it, 100% packet loss.
> 
> ifconfig is showing:
> 
> net0:1: flags=4163  mtu 1500
> inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
> ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
> device interrupt 16  memory 0xfddc-fdde
> 
> 
> Are both 192.168.1 devices on the same layer 2 segment (if not it wont
> work).
> 
> arp -a will show if the IP address was resolvable to a MAC address, If
> it says  you have a layer two problem.

Thank you all for your input.

The device is a tiny PA168V phone gateway. I was able to connect to via
browser interface but it had a password set in (which I don't have it
anymore). So I decided to reset to factory default and its factory
default IP is 192.168.1.100

The device has a WAN and LAN line.

When I reset it according to their instructions I on line line get and
IP as 192.168.1.100
but there are no ports open.

nmap -A -T4 -Pn -vvv 192.168.1.100

Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 10:46 MST
NSE: Loaded 118 scripts for scanning.
NSE: Script Pre-scanning.
NSE: Starting runlevel 1 (of 2) scan.
NSE: Starting runlevel 2 (of 2) scan.
Initiating ARP Ping Scan at 10:46
Scanning 192.168.1.100 [1 port]
Completed ARP Ping Scan at 10:46, 0.21s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 10:46
Completed Parallel DNS resolution of 1 host. at 10:46, 0.00s elapsed
DNS resolution of 1 IPs took 0.00s. Mode: Async [#: 1, OK: 0, NX: 1, DR:
0, SF: 0, TR: 1, CN: 0]
Initiating SYN Stealth Scan at 10:46
Scanning 192.168.1.100 [1000 ports]
Completed SYN Stealth Scan at 10:47, 21.07s elapsed (1000 total ports)
Initiating Service scan at 10:47
Initiating OS detection (try #1) against 192.168.1.100
Retrying OS detection (try #2) against 192.168.1.100
NSE: Script scanning 192.168.1.100.
NSE: Starting runlevel 1 (of 2) scan.
Initiating NSE at 10:47
Completed NSE at 10:47, 0.00s elapsed
NSE: Starting runlevel 2 (of 2) scan.
Nmap scan report for 192.168.1.100
Host is up (0.00012s latency).
All 1000 scanned ports on 192.168.1.100 are filtered
MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
Too many fingerprints match this host to give specific OS details
TCP/IP fingerprint:
SCAN(V=6.47%E=4%D=2/12%OT=%CT=%CU=%PV=Y%DS=1%DC=D%G=N%M=000945%TM=58A09F9F%P=x86_64-pc-linux-gnu)
U1(R=N)
IE(R=N)

Network Distance: 1 hop

TRACEROUTE
HOP RTT ADDRESS
1 0.12 ms 192.168.1.100

NSE: Script Post-scanning.
NSE: Starting runlevel 1 (of 2) scan.
NSE: Starting runlevel 2 (of 2) scan.
Read data files from: /usr/bin/../share/nmap
OS and Service detection performed. Please report any incorrect results
at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 24.38 seconds

---
arp -a

? (192.168.0.100) at  on net0
DD-WRT (10.0.0.1) at 90:e6:ba:2e:ec:5c [ether] on net0
? (192.168.1.100) at 00:09:45:41:73:d1 [ether] on net0
? (192.168.1.1) at  on net0
? (10.0.0.135) at 38:d5:47:7e:61:52 [ether] on net0
VOIP_TA1S1O (10.0.0.131) at 00:09:45:41:73:d1 [ether] on net0
SipuraSPA (10.0.0.118) at 00:0e:08:ca:17:b3 [ether] on net0
-

When I boot and try WAN port the device gets two local IP from DHCP, and
I see two ports open on IP: 10.0.0.131 (WAN)

23/tcp open  telnet?
80/tcp open  http

But I need to ask the manufacture what is the password, the default
suppose be be: 1234
Maybe I didn't reset it completely

--
Thelma

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread Naveen Narayanan 
On Sun, Feb 12, 2017 at 01:01:01AM -0700, the...@sys-concept.com wrote:
> My local network is 10.0.0.1 - 
> 
> I have an external device that is pre-set from factory to 192.168.1.100 and I 
> need to access to it via browser to change its network setting.
> So I do: 
> ifconfig net0:1 192.168.1.1 up
> 
> nmap -sn 192.168.1.1/24
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> Nmap scan report for 192.168.1.100
> Host is up (0.00015s latency).
> MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> Nmap scan report for 192.168.1.1
> Host is up.
> Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> 
> The device is showing up but I can not ping it, 100% packet loss.
> 
> -- 
> Thelma
> 

Hi Thelma,

Does the device have a firewall ? Is it set to drop ICMP packets by
default ?

Regards,
Naveen

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread Adam Carter 
On Sun, Feb 12, 2017 at 7:07 PM,  wrote:

> On 02/12/2017 01:01 AM, the...@sys-concept.com wrote:
> > My local network is 10.0.0.1 -
> >
> > I have an external device that is pre-set from factory to 192.168.1.100
> and I need to access to it via browser to change its network setting.
> > So I do:
> > ifconfig net0:1 192.168.1.1 up
> >
> > nmap -sn 192.168.1.1/24
> >
> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> > Nmap scan report for 192.168.1.100
> > Host is up (0.00015s latency).
> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> > Nmap scan report for 192.168.1.1
> > Host is up.
> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> >
> > The device is showing up but I can not ping it, 100% packet loss.
>
> ifconfig is showing:
>
> net0:1: flags=4163  mtu 1500
> inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
> ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
> device interrupt 16  memory 0xfddc-fdde
>

Are both 192.168.1 devices on the same layer 2 segment (if not it wont
work).

arp -a will show if the IP address was resolvable to a MAC address, If it
says  you have a layer two problem.

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread Mick 
On Sunday 12 Feb 2017 01:07:09 the...@sys-concept.com wrote:
> On 02/12/2017 01:01 AM, the...@sys-concept.com wrote:
> > My local network is 10.0.0.1 -
> > 
> > I have an external device that is pre-set from factory to 192.168.1.100
> > and I need to access to it via browser to change its network setting. So
> > I do:
> > ifconfig net0:1 192.168.1.1 up
> > 
> > nmap -sn 192.168.1.1/24
> > 
> > Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> > Nmap scan report for 192.168.1.100
> > Host is up (0.00015s latency).
> > MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> > Nmap scan report for 192.168.1.1
> > Host is up.
> > Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> > 
> > The device is showing up but I can not ping it, 100% packet loss.
> 
> ifconfig is showing:
> 
> net0:1: flags=4163  mtu 1500
> inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
> ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
> device interrupt 16  memory 0xfddc-fdde
> 
> --
> Thelma

Are you sure the device is configured to respond to pings?

Are your routes on the PC configured correctly, if you are using a secondary 
interface on the same NIC?

Does nmap -A -T4 -Pn -vvv 192.168.1.100 show any services running to which you 
can connect?

-- 
Regards,
Mick

signature.asc
Description: This is a digitally signed message part.

Re: [gentoo-user] Access device on 192.168.1.1 network

2017-02-12 Thread thelma 
On 02/12/2017 01:01 AM, the...@sys-concept.com wrote:
> My local network is 10.0.0.1 - 
> 
> I have an external device that is pre-set from factory to 192.168.1.100 and I 
> need to access to it via browser to change its network setting.
> So I do: 
> ifconfig net0:1 192.168.1.1 up
> 
> nmap -sn 192.168.1.1/24
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2017-02-12 00:54 MST
> Nmap scan report for 192.168.1.100
> Host is up (0.00015s latency).
> MAC Address: 00:09:45:41:73:D1 (Palmmicro Communications)
> Nmap scan report for 192.168.1.1
> Host is up.
> Nmap done: 256 IP addresses (2 hosts up) scanned in 3.78 seconds
> 
> The device is showing up but I can not ping it, 100% packet loss.

ifconfig is showing:

net0:1: flags=4163  mtu 1500
inet 192.168.1.1  netmask 255.255.255.0  broadcast 192.168.1.255
ether 00:1b:21:b8:27:b6  txqueuelen 1000  (Ethernet)
device interrupt 16  memory 0xfddc-fdde

--
Thelma