Re: [gentoo-user] No kernel boot after inserting more ram
On Jan 20, 2008 10:43 PM, Thomas Kahle [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I guess your kernel is configured to support only 1GB of RAM. In the kernel configuration look for Processor Type and Features There you find the Option. High Memory Support. Probably it is set to off. Set it to 4GB then recompile the kernel. That should do it. That was already suggested in a previous reply :) I do have High Memory Support enabled with 4GB, still, it refuses to boot! have fun Tom José Pedro Saraiva wrote: Well, after all kinds of tests and trying different types of memory configurations, I can only conclude that my kernel boots normally with 1 GB of RAM installed but hangs when I have 2 GB of RAM installed. I can't find a logical reason for this to happen. Any pointers or suggestions are welcome, Regards On Jan 19, 2008 11:31 PM, José Pedro Saraiva [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Following your replies I've done the following, in an attempt to isolate the problem: (memory #1 - old memory, memory #2 - new memory) - Runned memtest on both memories with 0 errors - Booted with both memories... kernel hang - Booted with memory #1 on slot #1 successfully - Booted with memory #1 on slot #2 successfully - Booted with memory #2 on slot #1 successfully - Booted with memory #2 on slot #2 successfully - Booted with both memories on windows successfully For some reason, my kernel hangs if I have 2 GB of RAM installed. And I do have High memory support (4GB), although that doesn't seem relevant. Ideas? :X Thank you all for the quick replies. Cheers On Jan 19, 2008 2:29 PM, Hal Martin [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: An alternative to running memtest (which is quite easy to do, I might add) would be to remove the original RAM and see if the computer boots with the new RAM only. Alternatively, you could just run memtest, as it is included with many BIOSs now. It doesn't take long to identify problems, if there are any. I find that test #5 is the best test for finding problems, however it tends to keep you in the dark until it's finished the test. -Hal Neil Bothwick wrote: On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- gentoo-user@lists.gentoo.org mailto:gentoo-user@lists.gentoo.org mailing list -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHk86lrpEWPKIUt7MRAtm6AJ9EbOJfcrxM7UoceMz3B2gdpKLn1gCfdMMh +04EiTXdzcE5JOp6ON5IQOQ= =SdgG -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
Well, after all kinds of tests and trying different types of memory configurations, I can only conclude that my kernel boots normally with 1 GB of RAM installed but hangs when I have 2 GB of RAM installed. I can't find a logical reason for this to happen. Any pointers or suggestions are welcome, Regards On Jan 19, 2008 11:31 PM, José Pedro Saraiva [EMAIL PROTECTED] wrote: Following your replies I've done the following, in an attempt to isolate the problem: (memory #1 - old memory, memory #2 - new memory) - Runned memtest on both memories with 0 errors - Booted with both memories... kernel hang - Booted with memory #1 on slot #1 successfully - Booted with memory #1 on slot #2 successfully - Booted with memory #2 on slot #1 successfully - Booted with memory #2 on slot #2 successfully - Booted with both memories on windows successfully For some reason, my kernel hangs if I have 2 GB of RAM installed. And I do have High memory support (4GB), although that doesn't seem relevant. Ideas? :X Thank you all for the quick replies. Cheers On Jan 19, 2008 2:29 PM, Hal Martin [EMAIL PROTECTED] wrote: An alternative to running memtest (which is quite easy to do, I might add) would be to remove the original RAM and see if the computer boots with the new RAM only. Alternatively, you could just run memtest, as it is included with many BIOSs now. It doesn't take long to identify problems, if there are any. I find that test #5 is the best test for finding problems, however it tends to keep you in the dark until it's finished the test. -Hal Neil Bothwick wrote: On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I guess your kernel is configured to support only 1GB of RAM. In the kernel configuration look for Processor Type and Features There you find the Option. High Memory Support. Probably it is set to off. Set it to 4GB then recompile the kernel. That should do it. have fun Tom José Pedro Saraiva wrote: Well, after all kinds of tests and trying different types of memory configurations, I can only conclude that my kernel boots normally with 1 GB of RAM installed but hangs when I have 2 GB of RAM installed. I can't find a logical reason for this to happen. Any pointers or suggestions are welcome, Regards On Jan 19, 2008 11:31 PM, José Pedro Saraiva [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Following your replies I've done the following, in an attempt to isolate the problem: (memory #1 - old memory, memory #2 - new memory) - Runned memtest on both memories with 0 errors - Booted with both memories... kernel hang - Booted with memory #1 on slot #1 successfully - Booted with memory #1 on slot #2 successfully - Booted with memory #2 on slot #1 successfully - Booted with memory #2 on slot #2 successfully - Booted with both memories on windows successfully For some reason, my kernel hangs if I have 2 GB of RAM installed. And I do have High memory support (4GB), although that doesn't seem relevant. Ideas? :X Thank you all for the quick replies. Cheers On Jan 19, 2008 2:29 PM, Hal Martin [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: An alternative to running memtest (which is quite easy to do, I might add) would be to remove the original RAM and see if the computer boots with the new RAM only. Alternatively, you could just run memtest, as it is included with many BIOSs now. It doesn't take long to identify problems, if there are any. I find that test #5 is the best test for finding problems, however it tends to keep you in the dark until it's finished the test. -Hal Neil Bothwick wrote: On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- gentoo-user@lists.gentoo.org mailto:gentoo-user@lists.gentoo.org mailing list -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHk86lrpEWPKIUt7MRAtm6AJ9EbOJfcrxM7UoceMz3B2gdpKLn1gCfdMMh +04EiTXdzcE5JOp6ON5IQOQ= =SdgG -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
RE: [gentoo-user] No kernel boot after inserting more ram
-Original Message- From: José Pedro Saraiva [mailto:[EMAIL PROTECTED] Sent: Sunday, January 20, 2008 4:48 PM To: gentoo-user@lists.gentoo.org ...snip... - Booted with both memories on windows successfully ...snip... This is surprising. Have you tried to boot from a liveCD with both memory modules inserted? -- Valmor -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- Neil Bothwick Phasers don't kill people...Unless you set them too high. signature.asc Description: PGP signature
Re: [gentoo-user] No kernel boot after inserting more ram
An alternative to running memtest (which is quite easy to do, I might add) would be to remove the original RAM and see if the computer boots with the new RAM only. Alternatively, you could just run memtest, as it is included with many BIOSs now. It doesn't take long to identify problems, if there are any. I find that test #5 is the best test for finding problems, however it tends to keep you in the dark until it's finished the test. -Hal Neil Bothwick wrote: On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
Following your replies I've done the following, in an attempt to isolate the problem: (memory #1 - old memory, memory #2 - new memory) - Runned memtest on both memories with 0 errors - Booted with both memories... kernel hang - Booted with memory #1 on slot #1 successfully - Booted with memory #1 on slot #2 successfully - Booted with memory #2 on slot #1 successfully - Booted with memory #2 on slot #2 successfully - Booted with both memories on windows successfully For some reason, my kernel hangs if I have 2 GB of RAM installed. And I do have High memory support (4GB), although that doesn't seem relevant. Ideas? :X Thank you all for the quick replies. Cheers On Jan 19, 2008 2:29 PM, Hal Martin [EMAIL PROTECTED] wrote: An alternative to running memtest (which is quite easy to do, I might add) would be to remove the original RAM and see if the computer boots with the new RAM only. Alternatively, you could just run memtest, as it is included with many BIOSs now. It doesn't take long to identify problems, if there are any. I find that test #5 is the best test for finding problems, however it tends to keep you in the dark until it's finished the test. -Hal Neil Bothwick wrote: On Fri, 18 Jan 2008 22:58:59 +, José Pedro Saraiva wrote: I'm sure there's nothing wrong with the RAM, How? Have you run memtest? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
Just a thought... Did you enable High Memory support in your kernel? Processor type and features --- High Memory Support --- (X) 4GB On Jan 18, 2008 4:10 PM, Philip Webb [EMAIL PROTECTED] wrote: 080118 José Pedro Saraiva wrote: Hi all, wise gentoo users! I've recently bought an extra GB of RAM for my laptop. After inserting it, kernel refuses to boot, hangs at Booting the kernel The first thing is to re-insert the RAM very carefully, then to check that no other connections got dislodged accidentally. Just my bit of Gentoo wisdom (smile). -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@lists.gentoo.org mailing list -- Courage is doing what is right. Do not be bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth. Thich Nhat Hanh, Vietnamese monk.
Re: [gentoo-user] No kernel boot after inserting more ram
Nothing to do about it... If he's using amd64 that option doesn't even exist. And even if he's on x86, if that option is not enabled, it will boot, but will just not use all the memory phisically available. On 1/18/08, Mike [EMAIL PROTECTED] wrote: Just a thought... Did you enable High Memory support in your kernel? Processor type and features --- High Memory Support --- (X) 4GB On Jan 18, 2008 4:10 PM, Philip Webb [EMAIL PROTECTED] wrote: 080118 José Pedro Saraiva wrote: Hi all, wise gentoo users! I've recently bought an extra GB of RAM for my laptop. After inserting it, kernel refuses to boot, hangs at Booting the kernel The first thing is to re-insert the RAM very carefully, then to check that no other connections got dislodged accidentally. Just my bit of Gentoo wisdom (smile). -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@lists.gentoo.org mailing list -- Courage is doing what is right. Do not be bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth. Thich Nhat Hanh, Vietnamese monk. -- Ricardo Saffi Marques Laboratório de Administração e Segurança de Sistemas (LAS/IC) Universidade Estadual de Campinas (UNICAMP) Cell: +55 (19) 8128-0435 Skype: ricardo_saffi_marques Website: http://www.rsaffi.com
Re: [gentoo-user] No kernel boot after inserting more ram
080118 José Pedro Saraiva wrote: Hi all, wise gentoo users! I've recently bought an extra GB of RAM for my laptop. After inserting it, kernel refuses to boot, hangs at Booting the kernel The first thing is to re-insert the RAM very carefully, then to check that no other connections got dislodged accidentally. Just my bit of Gentoo wisdom (smile). -- ,, SUPPORT ___//___, Philip Webb : [EMAIL PROTECTED] ELECTRIC /] [] [] [] [] []| Centre for Urban Community Studies TRANSIT`-O--O---' University of Toronto -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
On Fri, 2008-01-18 at 22:58 +, José Pedro Saraiva wrote: Hi all, wise gentoo users! I've recently bought an extra GB of RAM for my laptop. After inserting it, kernel refuses to boot, it hangs at Booting the kernel I'm sure there's nothing wrong with the RAM, so it must be some other issue, perhaps related with my boot options? Any help or ideas are welcome :) I don't know if you've tried this one already but another idea would be to enter the system setup (BIOS) and just save the changes, then reboot. You used to have to do this after any physical changes with RAM, though I haven't seen it in years. Just something else to try. Here's an extract of my grub.conf: title Gentoo 2.6.22-r8 root (hd0,1) kernel /boot/kernel-2.6.22-r8 root=/dev/sda5 splash=verbose,fadein,theme:emergence fbcon=scrollback:128K console=/dev/tty1 combined_mode=libata initrd /boot/fbsplash-emergence-1024x768 Best regards, José Pedro -- Statux [EMAIL PROTECTED] -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] No kernel boot after inserting more ram
On Friday 18 January 2008, José Pedro Saraiva wrote: Hi all, wise gentoo users! I've recently bought an extra GB of RAM for my laptop. After inserting it, kernel refuses to boot, it hangs at Booting the kernel I'm sure there's nothing wrong with the RAM, so it must be some other issue, perhaps related with my boot options? Well, if you haven't changed anything else other than the RAM module since the last time you booted the machine, then the problem would not be with your Grub configuration . . . If you have, then revert the change. Any help or ideas are welcome :) Boot a LiveCD and run memtest86. Sometimes even new memory modules are duff. Here's an extract of my grub.conf: title Gentoo 2.6.22-r8 root (hd0,1) kernel /boot/kernel-2.6.22-r8 root=/dev/sda5 splash=verbose,fadein,theme:emergence fbcon=scrollback:128K console=/dev/tty1 combined_mode=libata initrd /boot/fbsplash-emergence-1024x768 HTH. -- Regards, Mick signature.asc Description: This is a digitally signed message part.