Re: [gentoo-user] failed to load nvidia kernel module
BTW: 99% of the time, this has nothing to do with devfs, udev, or the kernel. When it says 'module failed to load' it's because the x is missing the driver file. i.e. /usr/lib/modules/drivers/nvidia_drv.so /usr/lib/modules/drivers/nvidia_drv.o On 10/30/05, renna bud <[EMAIL PROTECTED]> wrote: On Thursday 27 October 2005 22:12, Qian Qiao wrote:> On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote:> > -Original Message-> > From: Qian Qiao [mailto: [EMAIL PROTECTED]]> > Sent: Thursday, October 27, 2005 2:20 PM> > To: gentoo-user@lists.gentoo.org> > Subject: Re: [gentoo-user] failed to load nvidia kernel module > >> >> > I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And> > nvidia-kernel 6626-r4 runs fine.> >> >> > Seems it is:> > > > Thread from another user who experienced the problem:> >> > http://www.usenetlinux.com/archive/topic.php/t-495527.html > >> > The bug on it posted in Gentoo bugzilla:> >> > http://bugs.gentoo.org/show_bug.cgi?id=104369> >> > Regards, > > Bob Young>> Indeed, the comments in the bug report from b.g.o could've explained> it. I had RC_DEVICE_TARBALL="yes".>> And from the comments, a few ways to possibly fix the problem: > a) set RC_DEVICE_TARBALL="yes", then run /sbin/NVmakedevices.sh once.> or b) add> > if [ ! -e /dev/nvidia0 ]; then> /sbin/NVmakedevices.sh> fi> > to your /etc/conf.d/local.start>> -- Joe>> --> There are 3 kinds of people in the world:> Those who can count, and those who can't.>> Money can't buy everything. > Sometimes money can't even buy a gun...yes this was the very problem with me too. trying other versions of the driverdidn't work, but running /sbin/NVmakedevices.sh solved the problem, andhaving added if [ ! -e /dev/nvidia0 ]; then /sbin/NVmakedevices.shfito my local.start now all is working fine.--gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On Thursday 27 October 2005 22:12, Qian Qiao wrote: > On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > > -Original Message- > > From: Qian Qiao [mailto:[EMAIL PROTECTED] > > Sent: Thursday, October 27, 2005 2:20 PM > > To: gentoo-user@lists.gentoo.org > > Subject: Re: [gentoo-user] failed to load nvidia kernel module > > > > > > I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And > > nvidia-kernel 6626-r4 runs fine. > > > > > > Seems it is: > > > > Thread from another user who experienced the problem: > > > > http://www.usenetlinux.com/archive/topic.php/t-495527.html > > > > The bug on it posted in Gentoo bugzilla: > > > > http://bugs.gentoo.org/show_bug.cgi?id=104369 > > > > Regards, > > Bob Young > > Indeed, the comments in the bug report from b.g.o could've explained > it. I had RC_DEVICE_TARBALL="yes". > > And from the comments, a few ways to possibly fix the problem: > a) set RC_DEVICE_TARBALL="yes", then run /sbin/NVmakedevices.sh once. > or b) add > > if [ ! -e /dev/nvidia0 ]; then > /sbin/NVmakedevices.sh > fi > > to your /etc/conf.d/local.start > > -- Joe > > -- > There are 3 kinds of people in the world: > Those who can count, and those who can't. > > Money can't buy everything. > Sometimes money can't even buy a gun... yes this was the very problem with me too. trying other versions of the driver didn't work, but running /sbin/NVmakedevices.sh solved the problem, and having added if [ ! -e /dev/nvidia0 ]; then /sbin/NVmakedevices.sh fi to my local.start now all is working fine. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > > > -Original Message- > From: Qian Qiao [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 27, 2005 2:20 PM > To: gentoo-user@lists.gentoo.org > Subject: Re: [gentoo-user] failed to load nvidia kernel module > > > I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And > nvidia-kernel 6626-r4 runs fine. > > > Seems it is: > > Thread from another user who experienced the problem: > > http://www.usenetlinux.com/archive/topic.php/t-495527.html > > The bug on it posted in Gentoo bugzilla: > > http://bugs.gentoo.org/show_bug.cgi?id=104369 > > Regards, > Bob Young Indeed, the comments in the bug report from b.g.o could've explained it. I had RC_DEVICE_TARBALL="yes". And from the comments, a few ways to possibly fix the problem: a) set RC_DEVICE_TARBALL="yes", then run /sbin/NVmakedevices.sh once. or b) add if [ ! -e /dev/nvidia0 ]; then /sbin/NVmakedevices.sh fi to your /etc/conf.d/local.start -- Joe -- There are 3 kinds of people in the world: Those who can count, and those who can't. Money can't buy everything. Sometimes money can't even buy a gun... -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] failed to load nvidia kernel module
-Original Message- From: Qian Qiao [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 2:20 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] failed to load nvidia kernel module I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And nvidia-kernel 6626-r4 runs fine. Seems it is: Thread from another user who experienced the problem: http://www.usenetlinux.com/archive/topic.php/t-495527.html The bug on it posted in Gentoo bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=104369 Regards, Bob Young -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
Strange. I tried 7174 and down without success. Every time i had to use the script showed. I have to use 7667 or above with 2.6.13 in order to have nodes working correctly. It may also depend on xorg version. Greetings! Qian Qiao wrote: On 10/27/05, Jose Maria Alvarez Fernandez <[EMAIL PROTECTED]> wrote: It's kernel related. 2.6.13 doesn't create the nvidia devicess correctly with udev, which with 2.6.13 is default. You can try to put this in the local.start if you want to use this nvidia kernel versions: for i in 0 1 2 3 4 5 6 7; do node="/dev/nvidia$i" rm -f $node mknod $node c 195 $i || echo "mknod \"$node\"" chmod 0660 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" done node="/dev/nvidiactl" rm -f $node mknod $node c 195 255 || echo "mknod \"$node\"" chmod 0666 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" Hope it helps! I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And nvidia-kernel 6626-r4 runs fine. -- Joe -- There are 3 kinds of people in the world: Those who can count, and those who can't. Money can't buy everything. Sometimes money can't even buy a gun... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On 10/27/05, Jose Maria Alvarez Fernandez <[EMAIL PROTECTED]> wrote: > It's kernel related. 2.6.13 doesn't create the nvidia devicess correctly > with udev, which with 2.6.13 is default. You can try to put this in the > local.start if you want to use this nvidia kernel versions: > > for i in 0 1 2 3 4 5 6 7; do >node="/dev/nvidia$i" >rm -f $node >mknod $node c 195 $i || echo "mknod \"$node\"" >chmod 0660 $node || echo "chmod \"$node\"" >chown :video $node || echo "chown \"$node\"" > done > node="/dev/nvidiactl" > rm -f $node > mknod $node c 195 255 || echo "mknod \"$node\"" > chmod 0666 $node || echo "chmod \"$node\"" > chown :video $node || echo "chown \"$node\"" > > Hope it helps! I doubt it's kernel related, I'm on a amd64 with 2.6.13-r3 here. And nvidia-kernel 6626-r4 runs fine. -- Joe -- There are 3 kinds of people in the world: Those who can count, and those who can't. Money can't buy everything. Sometimes money can't even buy a gun... -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] failed to load nvidia kernel module
-Original Message- From: Jose Maria Alvarez Fernandez [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 1:37 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] failed to load nvidia kernel module It's kernel related. 2.6.13 doesn't create the nvidia devicess correctly with udev, which with 2.6.13 is default. You can try to put this in the local.start if you want to use this nvidia kernel versions: for i in 0 1 2 3 4 5 6 7; do node="/dev/nvidia$i" rm -f $node mknod $node c 195 $i || echo "mknod \"$node\"" chmod 0660 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" done node="/dev/nvidiactl" rm -f $node mknod $node c 195 255 || echo "mknod \"$node\"" chmod 0666 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" Hope it helps! *** I thought that was what I remembered. Althoughif it's the 2.6.13 gentoo kernel that's responsible for creating the necessary nodes, why do the unstable/masked versions of nvidia-kernel work correctly under a 2.6.13 kernel without any "helper" scripts? Regards, Bob Young -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
It's kernel related. 2.6.13 doesn't create the nvidia devicess correctly with udev, which with 2.6.13 is default. You can try to put this in the local.start if you want to use this nvidia kernel versions: for i in 0 1 2 3 4 5 6 7; do node="/dev/nvidia$i" rm -f $node mknod $node c 195 $i || echo "mknod \"$node\"" chmod 0660 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" done node="/dev/nvidiactl" rm -f $node mknod $node c 195 255 || echo "mknod \"$node\"" chmod 0666 $node || echo "chmod \"$node\"" chown :video $node || echo "chown \"$node\"" Hope it helps! Qian Qiao wrote: On 10/27/05, renna <[EMAIL PROTECTED]> wrote: hi to all. i am finalizing a fresh new gentoo installation. i'm having some problems with xorg and my nvidia geforce mx 440 card. i followed the instructions on the dedicated part of documentation on gentoo.org, and even tried the following commands as proposed by gentoo-wiki.com but i allways get the same error #emerge nvidia-kernel nvidia-glx nvidia-settings #opengl-update nvidia #modprobe nvidia #X -configure #X -config /root/xorg.conf.new but i allways get this (from /var/log/Xorg.0.log) [...] (II) LoadModule: "mouse" (II) Loading /usr/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0xec80 - 0xec8007ff (0x800) MX[B] [6] -1 0 0xed00 - 0xedff (0x100) MX[B] [7] -1 0 0xed80 - 0xed8000ff (0x100) MX[B] [8] -1 0 0xf800 - 0xf7ff (0x0) MX[B]O [9] -1 0 0xef7e - 0xef7f (0x2) MX[B](B) [10] -1 0 0xef80 - 0xef87 (0x8) MX[B](B) [11] -1 0 0xf000 - 0xf7ff (0x800) MX[B](B) [12] -1 0 0xee00 - 0xeeff (0x100) MX[B](B) [13] -1 0 0x - 0x (0x1) IX[B] [14] -1 0 0x - 0x00ff (0x100) IX[B] [15] -1 0 0xb800 - 0xb87f (0x80) IX[B] [16] -1 0 0xd000 - 0xd0ff (0x100) IX[B] [17] -1 0 0xd400 - 0xd41f (0x20) IX[B] [18] -1 0 0xd800 - 0xd81f (0x20) IX[B] [19] -1 0 0x9400 - 0x943f (0x40) IX[B] [20] -1 0 0x9800 - 0x98ff (0x100) IX[B] [21] -1 0 0xa000 - 0xa01f (0x20) IX[B] [22] -1 0 0xe800 - 0xe80f (0x10) IX[B] [23] -1 0 0xa400 - 0xa41f (0x20) IX[B] [24] -1 0 0xa800 - 0xa80f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0xec80 - 0xec8007ff (0x800) MX[B] [6] -1 0 0xed00 - 0xedff (0x100) MX[B] [7] -1 0 0xed80 - 0xed8000ff (0x100) MX[B] [8] -1 0 0xf800 - 0xf7ff (0x0) MX[B]O [9] -1 0 0xef7e - 0xef7f (0x2) MX[B](B) [10] -1 0 0xef80 - 0xef87 (0x8) MX[B](B) [11] -1 0 0xf000 - 0xf7ff (0x800) MX[B](B) [12] -1 0 0xee00 - 0xeeff (0x100) MX[B](B) [13] 0 0 0x000a - 0x000a (0x1) MS[B] [14] 0 0 0x000b - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000b (0x8000) MS[B] [16] -1 0 0x - 0x (0x1) IX[B] [17] -1 0 0x - 0x00ff (0x100) IX[B] [18] -1 0 0xb800 - 0xb87f (0x80) IX[B] [19] -1 0 0xd000 - 0xd0ff (0x100) IX[B] [20] -1 0 0xd400 - 0xd41f (0x20) IX[B] [21] -1 0 0xd800 - 0xd81f (0x20) IX[B] [22] -1 0 0x9400 - 0x943f (0x40) IX[B] [23] -1 0 0x9800 - 0x98ff (0x100) IX[B]
RE: [gentoo-user] failed to load nvidia kernel module
-Original Message- From: Qian Qiao [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 1:07 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] failed to load nvidia kernel module On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > Now that you mention it, I did have problems with a ~amd64 version of nvidia-kernel, couldn't remember the version number tho, :( And after that, I reverted to the stable version of nvidia-kernel, and had no problem afterwards. Strange... I think it's also kernel version related, as I had no problems using the stable version of the nvidia kernel with the 2.6.12 gentoo kernel, but then I did a completely fresh install and got a 2.6.13 kernel which exibited the described problem with the stable version of nvidia. Regards, Bob Young -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > Now that you mention it, I did have problems with a ~amd64 version of nvidia-kernel, couldn't remember the version number tho, :( And after that, I reverted to the stable version of nvidia-kernel, and had no problem afterwards. Strange... -- Joe -- There are 3 kinds of people in the world: Those who can count, and those who can't. Money can't buy everything. Sometimes money can't even buy a gun... -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] failed to load nvidia kernel module
-Original Message- From: Qian Qiao [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 11:53 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] failed to load nvidia kernel module On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > I'm ran into the exact same problem on a newly installed dual Opteron system > yesterday. Basically it's a broken nvidia ebuild. There was a thread on this > forum about this exact issue a couple of weeks ago. The "solution" is to > emerge the masked versions of the nvidia-kernel. To see what versions are > available you can: > HTH, > Bob Young Hmmm, I'm running nvidia-kernel 6629-r4 and nvidia-glx 6629-r6 on a amd64 system without any problems. I don't have the specific versions that were failing for me, as I'm not at home right now, but as I mentioned there was a thread on this recently, here are some quotes from that thread: OP: I can't find out what I'm doing wrong. I have a nvidia card (GeForce FX 5200) and I managed to launch the X server with the nv driver. When I try to use the nvidia driver, the server aborts, complaining about not finding a usable screen section. The following file is the one that works (with nv). To try nvidia, I made two changes: Load "glx" (instead of dri) and nvidia (as driver) instead of nv. Something is missing... (Didn't change identifiers and such.) I emerged nvidia/kernel and nvidia-glx for good measure, issued "modprobe nvidia", modules-update, openglx-update nvidia... Kernel is 2.6.13-gentoo-r3. The last lines of /var/log/Xorg.0.log : [29] 0 0 0x03c0 - 0x03df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xE000 (--) NVIDIA(0): MMIO registers at 0xFD00 (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Followup by OP: It seems it's a known bug. I emerged nvidia-kernel and nvidia-glx with ACCEPT_KEYWORDS="~x86" and it works now. Comment from list member: One thing to check is do you have any /dev/nv* devices? There was a thread in the forums on this which has a script for recreating them and another thread on this list in which I posted it. Reply by OP: That was it. I found the thread, that's why I emerged the masked versions of the driver (see my reply to myself). BTW: the suggestion to put the script in /etc/conf.d/local.start seems somewhat strange: doesn't /etc/init.d/local get executed after all other scripts in the default runlevel? Doesn't this mean that the script would be started _after_ the X server? *** Maybe this isn't the problem in this specific case, I don't know, but it's possible that it is. I don't remember whether or not the OP in this case specified whether or not the configuration was working with the default nv driver or not, that should be the first step in troubleshooting this. Once the nv driver works with the configuration, if the nvidia driver does not, that's a resonable indication that there is something wrong with the nvidia module. Regards, Bob Young -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On 10/27/05, Bob Young <[EMAIL PROTECTED]> wrote: > > > -Original Message- > From: renna bud [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 27, 2005 1:01 PM > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] failed to load nvidia kernel module > > hi to all. i am finalizing a fresh new gentoo installation. i'm having some > problems with xorg and my nvidia geforce mx 440 card. i followed the > instructions on the dedicated part of documentation on gentoo.org, and even > tried the following commands as proposed by gentoo-wiki.com but i allways > get > the same error > > #emerge nvidia-kernel nvidia-glx nvidia-settings > #opengl-update nvidia > #modprobe nvidia > #X -configure > #X -config /root/xorg.conf.new > > but i allways get this (from /var/log/Xorg.0.log) > > > (II) Setting vga for screen 0. > (==) NVIDIA(0): Depth 8, (==) framebuffer bpp 8 > (==) NVIDIA(0): Default visual is PseudoColor > (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) > (--) NVIDIA(0): Linear framebuffer at 0xF000 > (--) NVIDIA(0): MMIO registers at 0xEE00 > (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! > (EE) NVIDIA(0): *** Aborting *** > (II) UnloadModule: "nvidia" > (EE) Screen(s) found, but none have a usable configuration. > > Fatal server error: > no screens found > > Please consult the The X.Org Foundation support > at http://wiki.X.Org > for help. > Please also check the log file at "/var/log/Xorg.0.log" for additional > information. > > > portage installed me diffferent versions of nvidia-glx and nvidia-kernel > (1.0.6629-r6 and 1.0.6629-r4) should i install the same version? are there > newer versions available, or are these known not to work? right now i'm > using > the nv driver, and i have everything i need (kde) working, though i'd like > to > set up my nvidia card to its full capabilities > thanks > I'm ran into the exact same problem on a newly installed dual Opteron system > yesterday. Basically it's a broken nvidia ebuild. There was a thread on this > forum about this exact issue a couple of weeks ago. The "solution" is to > emerge the masked versions of the nvidia-kernel. To see what versions are > available you can: > ACCEPT_KEYWORDS="~x86" emerge -sv nvidia > Then umask the specific version of the packages you want to use: > #echo '=media-video/nvidia-kernel-1.0.7676 ~x86' > >>/etc/portage/package.keywords > #echo '=media-video/nvidia-glx-1.0.7676-r1 ~x86' > >>/etc/portage/package.keywords > > Assuming your running x86 of course, otherwise replace "~x86" with the > appropiate value for your arch. > HTH, > Bob Young Hmmm, I'm running nvidia-kernel 6629-r4 and nvidia-glx 6629-r6 on a amd64 system without any problems. -- Joe -- There are 3 kinds of people in the world: Those who can count, and those who can't. Money can't buy everything. Sometimes money can't even buy a gun... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] failed to load nvidia kernel module
On 10/27/05, renna <[EMAIL PROTECTED]> wrote: > hi to all. i am finalizing a fresh new gentoo installation. i'm having some > problems with xorg and my nvidia geforce mx 440 card. i followed the > instructions on the dedicated part of documentation on gentoo.org, and even > tried the following commands as proposed by gentoo-wiki.com but i allways get > the same error > > #emerge nvidia-kernel nvidia-glx nvidia-settings > #opengl-update nvidia > #modprobe nvidia > #X -configure > #X -config /root/xorg.conf.new > > but i allways get this (from /var/log/Xorg.0.log) > > > [...] > (II) LoadModule: "mouse" > (II) Loading /usr/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="X.Org Foundation" >compiled for 6.8.2, module version = 1.0.0 >Module class: X.Org XInput Driver >ABI class: X.Org XInput driver, version 0.4 > (II) LoadModule: "kbd" > (II) Loading /usr/lib/modules/input/kbd_drv.o > (II) Module kbd: vendor="X.Org Foundation" >compiled for 6.8.2, module version = 1.0.0 >Module class: X.Org XInput Driver >ABI class: X.Org XInput driver, version 0.4 > (II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004 > (II) NVIDIA Unified Driver for all NVIDIA GPUs > (II) Primary Device is: PCI 01:00:0 > (--) Chipset NVIDIA GPU found > (II) resource ranges after xf86ClaimFixedResources() call: >[0] -1 0 0xffe0 - 0x (0x20) MX[B](B) >[1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) >[2] -1 0 0x000f - 0x000f (0x1) MX[B] >[3] -1 0 0x000c - 0x000e (0x3) MX[B] >[4] -1 0 0x - 0x0009 (0xa) MX[B] >[5] -1 0 0xec80 - 0xec8007ff (0x800) MX[B] >[6] -1 0 0xed00 - 0xedff (0x100) MX[B] >[7] -1 0 0xed80 - 0xed8000ff (0x100) MX[B] >[8] -1 0 0xf800 - 0xf7ff (0x0) MX[B]O >[9] -1 0 0xef7e - 0xef7f (0x2) MX[B](B) >[10] -1 0 0xef80 - 0xef87 (0x8) MX[B](B) >[11] -1 0 0xf000 - 0xf7ff (0x800) MX[B](B) >[12] -1 0 0xee00 - 0xeeff (0x100) MX[B](B) >[13] -1 0 0x - 0x (0x1) IX[B] >[14] -1 0 0x - 0x00ff (0x100) IX[B] >[15] -1 0 0xb800 - 0xb87f (0x80) IX[B] >[16] -1 0 0xd000 - 0xd0ff (0x100) IX[B] >[17] -1 0 0xd400 - 0xd41f (0x20) IX[B] >[18] -1 0 0xd800 - 0xd81f (0x20) IX[B] >[19] -1 0 0x9400 - 0x943f (0x40) IX[B] >[20] -1 0 0x9800 - 0x98ff (0x100) IX[B] >[21] -1 0 0xa000 - 0xa01f (0x20) IX[B] >[22] -1 0 0xe800 - 0xe80f (0x10) IX[B] >[23] -1 0 0xa400 - 0xa41f (0x20) IX[B] >[24] -1 0 0xa800 - 0xa80f (0x10) IX[B] > (II) resource ranges after probing: >[0] -1 0 0xffe0 - 0x (0x20) MX[B](B) >[1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) >[2] -1 0 0x000f - 0x000f (0x1) MX[B] >[3] -1 0 0x000c - 0x000e (0x3) MX[B] >[4] -1 0 0x - 0x0009 (0xa) MX[B] >[5] -1 0 0xec80 - 0xec8007ff (0x800) MX[B] >[6] -1 0 0xed00 - 0xedff (0x100) MX[B] >[7] -1 0 0xed80 - 0xed8000ff (0x100) MX[B] >[8] -1 0 0xf800 - 0xf7ff (0x0) MX[B]O >[9] -1 0 0xef7e - 0xef7f (0x2) MX[B](B) >[10] -1 0 0xef80 - 0xef87 (0x8) MX[B](B) >[11] -1 0 0xf000 - 0xf7ff (0x800) MX[B](B) >[12] -1 0 0xee00 - 0xeeff (0x100) MX[B](B) >[13] 0 0 0x000a - 0x000a (0x1) MS[B] >[14] 0 0 0x000b - 0x000b7fff (0x8000) MS[B] >[15] 0 0 0x000b8000 - 0x000b (0x8000) MS[B] >[16] -1 0 0x - 0x (0x1) IX[B] >[17] -1 0 0x - 0x00ff (0x100) IX[B] >[18] -1 0 0xb800 - 0xb87f (0x80) IX[B] >[19] -1 0 0xd000 - 0xd0ff (0x100) IX[B] >[20] -1 0 0xd400 - 0xd41f (0x20) IX[B] >[21] -1 0 0xd800 - 0xd81f (0x20) IX[B] >[22] -1 0 0x9400 - 0x943f (0x40) IX[B] >[23] -1 0 0x9800 - 0x98ff (0x100) IX[B] >[24] -1 0 0xa000 - 0xa01f (0x20) IX[B] >[25] -1 0 0xe800 - 0xe80f (0x10) IX[B] >[26] -1 0 0xa400 - 0xa41f (0x20) IX[B] >[27] -1 0 0xa800 - 0xa80f (0x10) IX[B] >[28] 0 0 0x03b0 - 0x03bb (0xc) IS[B] >[29] 0 0 0x03c0 - 0x03df (0x20) IS[B] > (II) Setting vga for screen 0. > (==) NVIDIA(0): Depth 8, (==)
RE: [gentoo-user] failed to load nvidia kernel module
-Original Message- From: renna bud [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 1:01 PM To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] failed to load nvidia kernel module hi to all. i am finalizing a fresh new gentoo installation. i'm having some problems with xorg and my nvidia geforce mx 440 card. i followed the instructions on the dedicated part of documentation on gentoo.org, and even tried the following commands as proposed by gentoo-wiki.com but i allways get the same error #emerge nvidia-kernel nvidia-glx nvidia-settings #opengl-update nvidia #modprobe nvidia #X -configure #X -config /root/xorg.conf.new but i allways get this (from /var/log/Xorg.0.log) (II) Setting vga for screen 0. (==) NVIDIA(0): Depth 8, (==) framebuffer bpp 8 (==) NVIDIA(0): Default visual is PseudoColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xF000 (--) NVIDIA(0): MMIO registers at 0xEE00 (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.X.Org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. portage installed me diffferent versions of nvidia-glx and nvidia-kernel (1.0.6629-r6 and 1.0.6629-r4) should i install the same version? are there newer versions available, or are these known not to work? right now i'm using the nv driver, and i have everything i need (kde) working, though i'd like to set up my nvidia card to its full capabilities thanks I'm ran into the exact same problem on a newly installed dual Opteron system yesterday. Basically it's a broken nvidia ebuild. There was a thread on this forum about this exact issue a couple of weeks ago. The "solution" is to emerge the masked versions of the nvidia-kernel. To see what versions are available you can: ACCEPT_KEYWORDS="~x86" emerge -sv nvidia Then umask the specific version of the packages you want to use: #echo '=media-video/nvidia-kernel-1.0.7676 ~x86' >>/etc/portage/package.keywords #echo '=media-video/nvidia-glx-1.0.7676-r1 ~x86' >>/etc/portage/package.keywords Assuming your running x86 of course, otherwise replace "~x86" with the appropiate value for your arch. HTH, Bob Young -- gentoo-user@gentoo.org mailing list