Re: [gentoo-user] xorg 1.20.x not working
Bill Kenworthy wrote: > > Another me too ... same problem, same symptoms, complete rebuild > including modules. After hours of work I have had to mask 1.20 so I can > have a working system. > > > BillK What universe have I stumbled into? This is actually working Just Fine(tm) on my machine... [ 154.407] X.Org X Server 1.20.3 X Protocol Version 11, Revision 0 [ 154.408] Build Operating System: Linux 4.17.19 x86_64 Gentoo [ 154.408] Current Operating System: Linux tortoise 4.18.20 #1 SMP Fri Jan 25 09:51:34 EST 2019 x86_64 [ 154.408] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.20 root=/dev/sda3 ro [ 154.408] Build Date: 25 January 2019 03:04:39AM [ 154.409] -- Please report bounces from this address to a...@numentics.com Powers are not rights.
Re: [gentoo-user] xorg 1.20.x not working
On 11/2/19 3:51 am, John Covici wrote: > On Sun, 10 Feb 2019 11:57:27 -0500, > Andrew Savchenko wrote: >> [1 ] >> On Sun, 10 Feb 2019 10:21:21 -0600 Dale wrote: >>> Andrew Savchenko wrote: On Wed, 16 Jan 2019 15:18:37 +0800 Bill Kenworthy wrote: > Hi, > > I have a problem with any of the xorg-server 1.20.x series where I can > start simple apps like xterm but more complexapps like firefox and > thunderbird (for example) hang X with no erros in dmessage, log, > Xorg.0.log, .xsession-errors etc. The mouse can move but no clicks are > accepted. I have also recently run emerge -ep with the profile upgrade > (using 1.19 as I needed to use the system at the time) and a previous > rebuild of almost everything with 1.20 installed with no change. You need to rebuild all x11-drivers after xorg update. Input problems you are describing are likely caused by modules built for older xorg version. Try: # emerge -av $(eix -IC x11-drivers --only-names) Best regards, Andrew Savchenko >>> Isn't one of these supposed to do that? >>> >>> emerge @module-rebuild >>> >>> emerge @x11-module-rebuild >>> >>> I think the top one is the correct one. >> The top one will rebuild kernel modules. So it has nothing to do >> with xorg. The bottom one is correct, I just forgot about it. > I have much worse problems, whenever I start gdm, the screen shows the > same content as the virtual console where I started gdm. Gdm is > running, x-server is running, but the screen is not showing it. I did > compile all the drivers, so this is very strange. > Another me too ... same problem, same symptoms, complete rebuild including modules. After hours of work I have had to mask 1.20 so I can have a working system. BillK
Re: [gentoo-user] xorg 1.20.x not working
On Sun, 10 Feb 2019 11:57:27 -0500, Andrew Savchenko wrote: > > [1 ] > On Sun, 10 Feb 2019 10:21:21 -0600 Dale wrote: > > Andrew Savchenko wrote: > > > On Wed, 16 Jan 2019 15:18:37 +0800 Bill Kenworthy wrote: > > >> Hi, > > >> > > >> I have a problem with any of the xorg-server 1.20.x series where I can > > >> start simple apps like xterm but more complexapps like firefox and > > >> thunderbird (for example) hang X with no erros in dmessage, log, > > >> Xorg.0.log, .xsession-errors etc. The mouse can move but no clicks are > > >> accepted. I have also recently run emerge -ep with the profile upgrade > > >> (using 1.19 as I needed to use the system at the time) and a previous > > >> rebuild of almost everything with 1.20 installed with no change. > > > You need to rebuild all x11-drivers after xorg update. Input > > > problems you are describing are likely caused by modules built for > > > older xorg version. > > > > > > Try: > > > # emerge -av $(eix -IC x11-drivers --only-names) > > > > > > Best regards, > > > Andrew Savchenko > > > > Isn't one of these supposed to do that? > > > > emerge @module-rebuild > > > > emerge @x11-module-rebuild > > > > I think the top one is the correct one. > > The top one will rebuild kernel modules. So it has nothing to do > with xorg. The bottom one is correct, I just forgot about it. I have much worse problems, whenever I start gdm, the screen shows the same content as the virtual console where I started gdm. Gdm is running, x-server is running, but the screen is not showing it. I did compile all the drivers, so this is very strange. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com
Re: [gentoo-user] xorg 1.20.x not working
On Sun, 10 Feb 2019 10:21:21 -0600 Dale wrote: > Andrew Savchenko wrote: > > On Wed, 16 Jan 2019 15:18:37 +0800 Bill Kenworthy wrote: > >> Hi, > >> > >> I have a problem with any of the xorg-server 1.20.x series where I can > >> start simple apps like xterm but more complexapps like firefox and > >> thunderbird (for example) hang X with no erros in dmessage, log, > >> Xorg.0.log, .xsession-errors etc. The mouse can move but no clicks are > >> accepted. I have also recently run emerge -ep with the profile upgrade > >> (using 1.19 as I needed to use the system at the time) and a previous > >> rebuild of almost everything with 1.20 installed with no change. > > You need to rebuild all x11-drivers after xorg update. Input > > problems you are describing are likely caused by modules built for > > older xorg version. > > > > Try: > > # emerge -av $(eix -IC x11-drivers --only-names) > > > > Best regards, > > Andrew Savchenko > > Isn't one of these supposed to do that? > > emerge @module-rebuild > > emerge @x11-module-rebuild > > I think the top one is the correct one. The top one will rebuild kernel modules. So it has nothing to do with xorg. The bottom one is correct, I just forgot about it. Best regards, Andrew Savchenko pgpEWMqv_NINt.pgp Description: PGP signature
Re: [gentoo-user] xorg 1.20.x not working
Andrew Savchenko wrote: > On Wed, 16 Jan 2019 15:18:37 +0800 Bill Kenworthy wrote: >> Hi, >> >> I have a problem with any of the xorg-server 1.20.x series where I can >> start simple apps like xterm but more complexapps like firefox and >> thunderbird (for example) hang X with no erros in dmessage, log, >> Xorg.0.log, .xsession-errors etc. The mouse can move but no clicks are >> accepted. I have also recently run emerge -ep with the profile upgrade >> (using 1.19 as I needed to use the system at the time) and a previous >> rebuild of almost everything with 1.20 installed with no change. > You need to rebuild all x11-drivers after xorg update. Input > problems you are describing are likely caused by modules built for > older xorg version. > > Try: > # emerge -av $(eix -IC x11-drivers --only-names) > > Best regards, > Andrew Savchenko Isn't one of these supposed to do that? emerge @module-rebuild emerge @x11-module-rebuild I think the top one is the correct one. Dale :-) :-)
Re: [gentoo-user] xorg 1.20.x not working
On Wed, 16 Jan 2019 15:18:37 +0800 Bill Kenworthy wrote: > Hi, > > I have a problem with any of the xorg-server 1.20.x series where I can > start simple apps like xterm but more complexapps like firefox and > thunderbird (for example) hang X with no erros in dmessage, log, > Xorg.0.log, .xsession-errors etc. The mouse can move but no clicks are > accepted. I have also recently run emerge -ep with the profile upgrade > (using 1.19 as I needed to use the system at the time) and a previous > rebuild of almost everything with 1.20 installed with no change. You need to rebuild all x11-drivers after xorg update. Input problems you are describing are likely caused by modules built for older xorg version. Try: # emerge -av $(eix -IC x11-drivers --only-names) Best regards, Andrew Savchenko pgpVSVeA05_HH.pgp Description: PGP signature
