Re: [GNC] Lost all my transactions on Gnu cash
Oh, I found it! I had given it a different name from the overall name, and suddenly it popped up. Thank you so much for all your help and patience. I now have the accounts back and I am going to copy them immediately. Thank you. On Tue, Jan 22, 2019 at 9:35 PM Georgina Hunter-Jones < helicopterl...@gmail.com> wrote: > No, it didn't. I haven't had that since the beginning. I can now get up > Accounts: Account Summary but not an entries page. > > On Tue, Jan 22, 2019 at 9:32 PM Derek Atkins wrote: > >> Did it say Read-Only when you when through File->Open? >> When does it say it is read-only? >> >> -derek >> >> On Tue, January 22, 2019 4:27 pm, Georgina Hunter-Jones wrote: >> > Yes, thank you, that worked in that I now have a page with headings and >> my >> > accounts in total numbers. For example, the first one is Assets, next >> > Dehumidifier, then equity, expenses etc and all except Dehumidifier have >> > totals, but I still can not get into add new inputs. >> > >> > On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: >> > >> >> If that's a blank page then that means you have no data open. Did you >> >> try >> >> using File -> New File? That might have done it. >> >> >> >> Let's start over -- Go to File -> Open and then get to the folder where >> >> your data file is located and open it. What happens then? >> >> >> >> -derek >> >> >> >> On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: >> >> > I tried that but all i get is a blank page with headings. >> >> > >> >> > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: >> >> > >> >> >> Was it just one account register that was readonly?? Or was it when >> >> you >> >> >> opened the file? >> >> >> >> >> >> What do you mean by "get back to my accounts"? Are you missing the >> >> >> Chart >> >> >> of Accounts Page? If so, use View -> New Accounts Page >> >> >> >> >> >> -derek >> >> >> >> >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: >> >> >> > Ah, it said it was read only a page or so ago. I keep fiddling >> with >> >> >> it, >> >> >> > hoping to get back to my accounts, but I seem to be making it >> >> worse. >> >> >> If I >> >> >> > can get the read only thing back I’ll take a screenshot. Sorry. >> I’m >> >> >> > getting >> >> >> > a bit lost here. >> >> >> > >> >> >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins >> wrote: >> >> >> > >> >> >> >> Hi, >> >> >> >> >> >> >> >> So if that didn't work -- how is it telling you that it is >> >> read-only? >> >> >> >> Could you supply a screen shot? >> >> >> >> Maybe a step-by-step of what you do and what happens? >> >> >> >> >> >> >> >> I'm at a loss for what else would cause a read-only situation >> here >> >> >> >> except, >> >> >> >> perhaps, you opening a placeholder account. >> >> >> >> >> >> >> >> Thanks, >> >> >> >> >> >> >> >> -derek >> >> >> >> >> >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >> >> >> >> > Thanks, sadly it did not work. Sorry that replies are so slow, >> >> Im >> >> >> not >> >> >> >> > always with the old computer. Thanks >> >> >> >> > >> >> >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >> >> >> >> > helicopterl...@gmail.com> wrote: >> >> >> >> > >> >> >> >> >> Thanks, i’ll Try that. Georgina >> >> >> >> >> >> >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins > > >> >> >> wrote: >> >> >> >> >> >> >> >> >> >>> Dear Georgina, >> >> >> >> >>> >> >> >> >> >>> [snip] >> >> >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >> >> >> >> >>> Hunter-Jones: >> >> >> >> >>> >> Dear Geert, >> >> >> >> >>> >> Thank you, that helped to a certain extent. I can now see >> >> >> lines >> >> >> >> of >> >> >> >> >>> >> information with the account details. However, it appears >> >> to >> >> >> be >> >> >> >> >>> 'read >> >> >> >> >>> >> only' >> >> >> >> >>> >> and I cannot enter any further data. I also cannot see >> >> >> anything >> >> >> >> more >> >> >> >> >>> >> than >> >> >> >> >>> >> an overall view of the account, ie no dates etc. >> >> >> >> >>> >> >> >> >> >> >>> >> Anything I can do to change that? Thank you very much for >> >> your >> >> >> >> help >> >> >> >> >>> so >> >> >> >> >>> >> far. >> >> >> >> >>> >> Best wishes, Georgina >> >> >> >> >>> >> >> >> >> >>> This sounds like it could be a permissions problem, although >> >> I'm >> >> >> not >> >> >> >> >>> familiar enough with MacOS permissions to know how best to >> fix >> >> >> it. >> >> >> >> >>> Hopefully a MacOS expert will come in. But it really sounds >> >> like >> >> >> >> when >> >> >> >> >>> you >> >> >> >> >>> copied your data file you put it into a directory that your >> >> >> current >> >> >> >> >>> user >> >> >> >> >>> does not have access to write new files. >> >> >> >> >>> >> >> >> >> >>> Can you try this: >> >> >> >> >>> >> >> >> >> >>> Make a new folder from the Finder >> >> >> >> >>> Copy your data file to the new Folder >> >> >> >> >>> Open GnuCash >> >> >> >> >>> File -> Open the data file from the new fo
Re: [GNC] Lost all my transactions on Gnu cash
No, it didn't. I haven't had that since the beginning. I can now get up Accounts: Account Summary but not an entries page. On Tue, Jan 22, 2019 at 9:32 PM Derek Atkins wrote: > Did it say Read-Only when you when through File->Open? > When does it say it is read-only? > > -derek > > On Tue, January 22, 2019 4:27 pm, Georgina Hunter-Jones wrote: > > Yes, thank you, that worked in that I now have a page with headings and > my > > accounts in total numbers. For example, the first one is Assets, next > > Dehumidifier, then equity, expenses etc and all except Dehumidifier have > > totals, but I still can not get into add new inputs. > > > > On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: > > > >> If that's a blank page then that means you have no data open. Did you > >> try > >> using File -> New File? That might have done it. > >> > >> Let's start over -- Go to File -> Open and then get to the folder where > >> your data file is located and open it. What happens then? > >> > >> -derek > >> > >> On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: > >> > I tried that but all i get is a blank page with headings. > >> > > >> > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: > >> > > >> >> Was it just one account register that was readonly?? Or was it when > >> you > >> >> opened the file? > >> >> > >> >> What do you mean by "get back to my accounts"? Are you missing the > >> >> Chart > >> >> of Accounts Page? If so, use View -> New Accounts Page > >> >> > >> >> -derek > >> >> > >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: > >> >> > Ah, it said it was read only a page or so ago. I keep fiddling with > >> >> it, > >> >> > hoping to get back to my accounts, but I seem to be making it > >> worse. > >> >> If I > >> >> > can get the read only thing back I’ll take a screenshot. Sorry. I’m > >> >> > getting > >> >> > a bit lost here. > >> >> > > >> >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins > wrote: > >> >> > > >> >> >> Hi, > >> >> >> > >> >> >> So if that didn't work -- how is it telling you that it is > >> read-only? > >> >> >> Could you supply a screen shot? > >> >> >> Maybe a step-by-step of what you do and what happens? > >> >> >> > >> >> >> I'm at a loss for what else would cause a read-only situation here > >> >> >> except, > >> >> >> perhaps, you opening a placeholder account. > >> >> >> > >> >> >> Thanks, > >> >> >> > >> >> >> -derek > >> >> >> > >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: > >> >> >> > Thanks, sadly it did not work. Sorry that replies are so slow, > >> Im > >> >> not > >> >> >> > always with the old computer. Thanks > >> >> >> > > >> >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < > >> >> >> > helicopterl...@gmail.com> wrote: > >> >> >> > > >> >> >> >> Thanks, i’ll Try that. Georgina > >> >> >> >> > >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins > >> >> wrote: > >> >> >> >> > >> >> >> >>> Dear Georgina, > >> >> >> >>> > >> >> >> >>> [snip] > >> >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina > >> >> >> >>> Hunter-Jones: > >> >> >> >>> >> Dear Geert, > >> >> >> >>> >> Thank you, that helped to a certain extent. I can now see > >> >> lines > >> >> >> of > >> >> >> >>> >> information with the account details. However, it appears > >> to > >> >> be > >> >> >> >>> 'read > >> >> >> >>> >> only' > >> >> >> >>> >> and I cannot enter any further data. I also cannot see > >> >> anything > >> >> >> more > >> >> >> >>> >> than > >> >> >> >>> >> an overall view of the account, ie no dates etc. > >> >> >> >>> >> > >> >> >> >>> >> Anything I can do to change that? Thank you very much for > >> your > >> >> >> help > >> >> >> >>> so > >> >> >> >>> >> far. > >> >> >> >>> >> Best wishes, Georgina > >> >> >> >>> > >> >> >> >>> This sounds like it could be a permissions problem, although > >> I'm > >> >> not > >> >> >> >>> familiar enough with MacOS permissions to know how best to fix > >> >> it. > >> >> >> >>> Hopefully a MacOS expert will come in. But it really sounds > >> like > >> >> >> when > >> >> >> >>> you > >> >> >> >>> copied your data file you put it into a directory that your > >> >> current > >> >> >> >>> user > >> >> >> >>> does not have access to write new files. > >> >> >> >>> > >> >> >> >>> Can you try this: > >> >> >> >>> > >> >> >> >>> Make a new folder from the Finder > >> >> >> >>> Copy your data file to the new Folder > >> >> >> >>> Open GnuCash > >> >> >> >>> File -> Open the data file from the new folder > >> >> >> >>> > >> >> >> >>> Does this help? > >> >> >> >>> > >> >> >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens > >> >> >> >>> >> > >> >> >> >>> >> > >> >> >> >>> >> wrote: > >> >> >> >>> >> > A few other suggestions: > >> >> >> >>> >> > > >> >> >> >>> >> > 1. Which files did you transfer ? While that sounds > >> obvious, > >> >> it > >> >> >> is > >> >> >> >>> not > >> >> >> >>> >> > always > >> >> >> >>> >> > so. So this question is to ensure y
Re: [GNC] Lost all my transactions on Gnu cash
Yes, thank you, that worked in that I now have a page with headings and my accounts in total numbers. For example, the first one is Assets, next Dehumidifier, then equity, expenses etc and all except Dehumidifier have totals, but I still can not get into add new inputs. On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: > If that's a blank page then that means you have no data open. Did you try > using File -> New File? That might have done it. > > Let's start over -- Go to File -> Open and then get to the folder where > your data file is located and open it. What happens then? > > -derek > > On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: > > I tried that but all i get is a blank page with headings. > > > > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: > > > >> Was it just one account register that was readonly?? Or was it when you > >> opened the file? > >> > >> What do you mean by "get back to my accounts"? Are you missing the > >> Chart > >> of Accounts Page? If so, use View -> New Accounts Page > >> > >> -derek > >> > >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: > >> > Ah, it said it was read only a page or so ago. I keep fiddling with > >> it, > >> > hoping to get back to my accounts, but I seem to be making it worse. > >> If I > >> > can get the read only thing back I’ll take a screenshot. Sorry. I’m > >> > getting > >> > a bit lost here. > >> > > >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: > >> > > >> >> Hi, > >> >> > >> >> So if that didn't work -- how is it telling you that it is read-only? > >> >> Could you supply a screen shot? > >> >> Maybe a step-by-step of what you do and what happens? > >> >> > >> >> I'm at a loss for what else would cause a read-only situation here > >> >> except, > >> >> perhaps, you opening a placeholder account. > >> >> > >> >> Thanks, > >> >> > >> >> -derek > >> >> > >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: > >> >> > Thanks, sadly it did not work. Sorry that replies are so slow, Im > >> not > >> >> > always with the old computer. Thanks > >> >> > > >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < > >> >> > helicopterl...@gmail.com> wrote: > >> >> > > >> >> >> Thanks, i’ll Try that. Georgina > >> >> >> > >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins > >> wrote: > >> >> >> > >> >> >>> Dear Georgina, > >> >> >>> > >> >> >>> [snip] > >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina > >> >> >>> Hunter-Jones: > >> >> >>> >> Dear Geert, > >> >> >>> >> Thank you, that helped to a certain extent. I can now see > >> lines > >> >> of > >> >> >>> >> information with the account details. However, it appears to > >> be > >> >> >>> 'read > >> >> >>> >> only' > >> >> >>> >> and I cannot enter any further data. I also cannot see > >> anything > >> >> more > >> >> >>> >> than > >> >> >>> >> an overall view of the account, ie no dates etc. > >> >> >>> >> > >> >> >>> >> Anything I can do to change that? Thank you very much for your > >> >> help > >> >> >>> so > >> >> >>> >> far. > >> >> >>> >> Best wishes, Georgina > >> >> >>> > >> >> >>> This sounds like it could be a permissions problem, although I'm > >> not > >> >> >>> familiar enough with MacOS permissions to know how best to fix > >> it. > >> >> >>> Hopefully a MacOS expert will come in. But it really sounds like > >> >> when > >> >> >>> you > >> >> >>> copied your data file you put it into a directory that your > >> current > >> >> >>> user > >> >> >>> does not have access to write new files. > >> >> >>> > >> >> >>> Can you try this: > >> >> >>> > >> >> >>> Make a new folder from the Finder > >> >> >>> Copy your data file to the new Folder > >> >> >>> Open GnuCash > >> >> >>> File -> Open the data file from the new folder > >> >> >>> > >> >> >>> Does this help? > >> >> >>> > >> >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens > >> >> >>> >> > >> >> >>> >> > >> >> >>> >> wrote: > >> >> >>> >> > A few other suggestions: > >> >> >>> >> > > >> >> >>> >> > 1. Which files did you transfer ? While that sounds obvious, > >> it > >> >> is > >> >> >>> not > >> >> >>> >> > always > >> >> >>> >> > so. So this question is to ensure you really did copy your > >> >> gnucash > >> >> >>> >> data > >> >> >>> >> > file > >> >> >>> >> > to the older computer. > >> >> >>> >> > > >> >> >>> >> > 2. How have you tried to open your gnucash data file ? It's > >> >> >>> important > >> >> >>> >> to > >> >> >>> >> > realize that on MacOS double-clicking on a random gnucash > >> data > >> >> >>> file > >> >> >>> >> > doesn't > >> >> >>> >> > necessarily mean that file will be opened. GnuCash will > >> always > >> >> >>> reopen > >> >> >>> >> that > >> >> >>> >> > previously last opened file (which may be different from the > >> >> one > >> >> >>> you > >> >> >>> >> > double- > >> >> >>> >> > clicked on). To fix that you can: > >> >> >>> >> > - Start the gnucash application > >> >> >>> >> > - Select File->Open > >> >> >
Re: [GNC] Lost all my transactions on Gnu cash
I tried that but all i get is a blank page with headings. On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: > Was it just one account register that was readonly?? Or was it when you > opened the file? > > What do you mean by "get back to my accounts"? Are you missing the Chart > of Accounts Page? If so, use View -> New Accounts Page > > -derek > > On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: > > Ah, it said it was read only a page or so ago. I keep fiddling with it, > > hoping to get back to my accounts, but I seem to be making it worse. If I > > can get the read only thing back I’ll take a screenshot. Sorry. I’m > > getting > > a bit lost here. > > > > On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: > > > >> Hi, > >> > >> So if that didn't work -- how is it telling you that it is read-only? > >> Could you supply a screen shot? > >> Maybe a step-by-step of what you do and what happens? > >> > >> I'm at a loss for what else would cause a read-only situation here > >> except, > >> perhaps, you opening a placeholder account. > >> > >> Thanks, > >> > >> -derek > >> > >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: > >> > Thanks, sadly it did not work. Sorry that replies are so slow, Im not > >> > always with the old computer. Thanks > >> > > >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < > >> > helicopterl...@gmail.com> wrote: > >> > > >> >> Thanks, i’ll Try that. Georgina > >> >> > >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins > wrote: > >> >> > >> >>> Dear Georgina, > >> >>> > >> >>> [snip] > >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina > >> >>> Hunter-Jones: > >> >>> >> Dear Geert, > >> >>> >> Thank you, that helped to a certain extent. I can now see lines > >> of > >> >>> >> information with the account details. However, it appears to be > >> >>> 'read > >> >>> >> only' > >> >>> >> and I cannot enter any further data. I also cannot see anything > >> more > >> >>> >> than > >> >>> >> an overall view of the account, ie no dates etc. > >> >>> >> > >> >>> >> Anything I can do to change that? Thank you very much for your > >> help > >> >>> so > >> >>> >> far. > >> >>> >> Best wishes, Georgina > >> >>> > >> >>> This sounds like it could be a permissions problem, although I'm not > >> >>> familiar enough with MacOS permissions to know how best to fix it. > >> >>> Hopefully a MacOS expert will come in. But it really sounds like > >> when > >> >>> you > >> >>> copied your data file you put it into a directory that your current > >> >>> user > >> >>> does not have access to write new files. > >> >>> > >> >>> Can you try this: > >> >>> > >> >>> Make a new folder from the Finder > >> >>> Copy your data file to the new Folder > >> >>> Open GnuCash > >> >>> File -> Open the data file from the new folder > >> >>> > >> >>> Does this help? > >> >>> > >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens > >> >>> >> > >> >>> >> > >> >>> >> wrote: > >> >>> >> > A few other suggestions: > >> >>> >> > > >> >>> >> > 1. Which files did you transfer ? While that sounds obvious, it > >> is > >> >>> not > >> >>> >> > always > >> >>> >> > so. So this question is to ensure you really did copy your > >> gnucash > >> >>> >> data > >> >>> >> > file > >> >>> >> > to the older computer. > >> >>> >> > > >> >>> >> > 2. How have you tried to open your gnucash data file ? It's > >> >>> important > >> >>> >> to > >> >>> >> > realize that on MacOS double-clicking on a random gnucash data > >> >>> file > >> >>> >> > doesn't > >> >>> >> > necessarily mean that file will be opened. GnuCash will always > >> >>> reopen > >> >>> >> that > >> >>> >> > previously last opened file (which may be different from the > >> one > >> >>> you > >> >>> >> > double- > >> >>> >> > clicked on). To fix that you can: > >> >>> >> > - Start the gnucash application > >> >>> >> > - Select File->Open > >> >>> >> > - Navigate to your gnucash data file and open it this way > >> >>> >> > > >> >>> >> > Will that bring your data back ? > >> >>> >> > > >> >>> >> > Regards, > >> >>> >> > > >> >>> >> > Geert > >> >>> > >> >>> > Please remember to CC this list on all your replies. > >> >>> > You can do this by using Reply-To-List or Reply-All. > >> >>> > >> >>> -derek > >> >>> > >> >>> -- > >> >>>Derek Atkins 617-623-3745 > >> >>>de...@ihtfp.com www.ihtfp.com > >> >>>Computer and Internet Security Consultant > >> >>> > >> >>> > >> > > >> > >> > >> -- > >>Derek Atkins 617-623-3745 > >>de...@ihtfp.com www.ihtfp.com > >>Computer and Internet Security Consultant > >> > >> > > > > > -- >Derek Atkins 617-623-3745 >de...@ihtfp.com www.ihtfp.com >Computer and Internet Security Consultant > > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe:
Re: [GNC] Lost all my transactions on Gnu cash
Ah, it said it was read only a page or so ago. I keep fiddling with it, hoping to get back to my accounts, but I seem to be making it worse. If I can get the read only thing back I’ll take a screenshot. Sorry. I’m getting a bit lost here. On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: > Hi, > > So if that didn't work -- how is it telling you that it is read-only? > Could you supply a screen shot? > Maybe a step-by-step of what you do and what happens? > > I'm at a loss for what else would cause a read-only situation here except, > perhaps, you opening a placeholder account. > > Thanks, > > -derek > > On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: > > Thanks, sadly it did not work. Sorry that replies are so slow, Im not > > always with the old computer. Thanks > > > > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < > > helicopterl...@gmail.com> wrote: > > > >> Thanks, i’ll Try that. Georgina > >> > >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins wrote: > >> > >>> Dear Georgina, > >>> > >>> [snip] > >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina > >>> Hunter-Jones: > >>> >> Dear Geert, > >>> >> Thank you, that helped to a certain extent. I can now see lines of > >>> >> information with the account details. However, it appears to be > >>> 'read > >>> >> only' > >>> >> and I cannot enter any further data. I also cannot see anything more > >>> >> than > >>> >> an overall view of the account, ie no dates etc. > >>> >> > >>> >> Anything I can do to change that? Thank you very much for your help > >>> so > >>> >> far. > >>> >> Best wishes, Georgina > >>> > >>> This sounds like it could be a permissions problem, although I'm not > >>> familiar enough with MacOS permissions to know how best to fix it. > >>> Hopefully a MacOS expert will come in. But it really sounds like when > >>> you > >>> copied your data file you put it into a directory that your current > >>> user > >>> does not have access to write new files. > >>> > >>> Can you try this: > >>> > >>> Make a new folder from the Finder > >>> Copy your data file to the new Folder > >>> Open GnuCash > >>> File -> Open the data file from the new folder > >>> > >>> Does this help? > >>> > >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens > >>> >> > >>> >> > >>> >> wrote: > >>> >> > A few other suggestions: > >>> >> > > >>> >> > 1. Which files did you transfer ? While that sounds obvious, it is > >>> not > >>> >> > always > >>> >> > so. So this question is to ensure you really did copy your gnucash > >>> >> data > >>> >> > file > >>> >> > to the older computer. > >>> >> > > >>> >> > 2. How have you tried to open your gnucash data file ? It's > >>> important > >>> >> to > >>> >> > realize that on MacOS double-clicking on a random gnucash data > >>> file > >>> >> > doesn't > >>> >> > necessarily mean that file will be opened. GnuCash will always > >>> reopen > >>> >> that > >>> >> > previously last opened file (which may be different from the one > >>> you > >>> >> > double- > >>> >> > clicked on). To fix that you can: > >>> >> > - Start the gnucash application > >>> >> > - Select File->Open > >>> >> > - Navigate to your gnucash data file and open it this way > >>> >> > > >>> >> > Will that bring your data back ? > >>> >> > > >>> >> > Regards, > >>> >> > > >>> >> > Geert > >>> > >>> > Please remember to CC this list on all your replies. > >>> > You can do this by using Reply-To-List or Reply-All. > >>> > >>> -derek > >>> > >>> -- > >>>Derek Atkins 617-623-3745 > >>>de...@ihtfp.com www.ihtfp.com > >>>Computer and Internet Security Consultant > >>> > >>> > > > > > -- >Derek Atkins 617-623-3745 >de...@ihtfp.com www.ihtfp.com >Computer and Internet Security Consultant > > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Lost all my transactions on Gnu cash
Thanks, sadly it did not work. Sorry that replies are so slow, Im not always with the old computer. Thanks On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < helicopterl...@gmail.com> wrote: > Thanks, i’ll Try that. Georgina > > On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins wrote: > >> Dear Georgina, >> >> [snip] >> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina Hunter-Jones: >> >> Dear Geert, >> >> Thank you, that helped to a certain extent. I can now see lines of >> >> information with the account details. However, it appears to be 'read >> >> only' >> >> and I cannot enter any further data. I also cannot see anything more >> >> than >> >> an overall view of the account, ie no dates etc. >> >> >> >> Anything I can do to change that? Thank you very much for your help so >> >> far. >> >> Best wishes, Georgina >> >> This sounds like it could be a permissions problem, although I'm not >> familiar enough with MacOS permissions to know how best to fix it. >> Hopefully a MacOS expert will come in. But it really sounds like when you >> copied your data file you put it into a directory that your current user >> does not have access to write new files. >> >> Can you try this: >> >> Make a new folder from the Finder >> Copy your data file to the new Folder >> Open GnuCash >> File -> Open the data file from the new folder >> >> Does this help? >> >> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens >> >> >> >> >> >> wrote: >> >> > A few other suggestions: >> >> > >> >> > 1. Which files did you transfer ? While that sounds obvious, it is >> not >> >> > always >> >> > so. So this question is to ensure you really did copy your gnucash >> >> data >> >> > file >> >> > to the older computer. >> >> > >> >> > 2. How have you tried to open your gnucash data file ? It's important >> >> to >> >> > realize that on MacOS double-clicking on a random gnucash data file >> >> > doesn't >> >> > necessarily mean that file will be opened. GnuCash will always reopen >> >> that >> >> > previously last opened file (which may be different from the one you >> >> > double- >> >> > clicked on). To fix that you can: >> >> > - Start the gnucash application >> >> > - Select File->Open >> >> > - Navigate to your gnucash data file and open it this way >> >> > >> >> > Will that bring your data back ? >> >> > >> >> > Regards, >> >> > >> >> > Geert >> >> > Please remember to CC this list on all your replies. >> > You can do this by using Reply-To-List or Reply-All. >> >> -derek >> >> -- >>Derek Atkins 617-623-3745 >>de...@ihtfp.com www.ihtfp.com >>Computer and Internet Security Consultant >> >> ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Check for negative amount in scheduled transaction formula
Thanks for this Derek. I'm on a Mac and only see one copy of fin.scm in the application bundle. Seems any edits to this would be lost at the next upgrade. Should I be defining another one somewhere under ~/Library/Application Support/GnuCash or elsewhere? Ron - Original Message - From: "Derek Atkins" To: "gnucash dgr9z" Cc: "Gnucash Users" Sent: Monday, January 21, 2019 3:16:52 PM Subject: Re: [GNC] Check for negative amount in scheduled transaction formula gnucash.dg...@ncf.ca writes: > Hi, > > Is it possible to convert negative numbers to 0 in a formula? something like: > a-b < 0 ? 0 : a-b > > If this needs to be defined as a function someplace, what would it > look like, where would it go, and how would it be called from the > template? Look at fin.scm and copy the functions in there. > Many thanks, > Ron > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. -derek -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Importing QIF results into duplicate entry
Hi David, Thanks for your suggestion! I exported each of my account into a separate QIF file and then started importing them one by one. That worked well, although bit tedious. I had to go through duplicate detection, but that was reasonably okay as gnucash had already made a very good guess. Thanks On Sun, Jan 20, 2019 at 12:03 PM David T. wrote: > Hi, > > Welcome to GnuCash. > > Getting your data into GnuCash always seems to be a challenge; many > threads on the lists over the years attest to it. > > Given your particular problem—that is, your exported data is producing > overlaps in the results—you might be advised to revisit the export piece > and separate the accounts into different QIF files. Beginning with the > account with the most transactions, perform an import into GnuCash. Then, > **in separate passes**, import the other files, and be sure to use the > assignment window to link your incoming transactions to those that already > exist in the file. In this way, you can tell GnuCash to connect the > transactions together in the final file. > > Cheers, > David T. > > > On Jan 20, 2019, at 10:16 PM, Chitresh Bhushan > wrote: > > > > Hi all, > > > > I am trying to switch to gnucash. I have exported all my data in QIF > format > > from the old software I was using, moneyguru ( > > https://github.com/hsoft/moneyguru). However, when I import the exported > > QIF file in gnucash, I see a lot of duplicate entries in gnucash, > resulting > > to incorrect balances. Moneyguru also uses double-entry accounting, so I > > was hoping this transition would be easy. > > > > To reproduce the behavior, I have linked below a sample (tiny) QIF file > > exported from moneyguru. Can someone take a look and check if the file > > format is correct? Or am I doing something wrong during the import? I am > > new to gnucash and using gnucash 2.6.19 on Ubuntu. > > > > The sample file generates duplicates in checking and credit-card accounts > > (for $980 entry) on importing. My actual data has more than 8 yrs of > > entries.. so its quite big with a lot of duplicates. > > > > Sample QIF file exported from moneyguru: > > https://peep.updog.co/shared/tiny_export.qif (381 bytes) > > > > Any help is highly appreciated! > > > > Thanks, > > CB > > ___ > > gnucash-user mailing list > > gnucash-user@gnucash.org > > To update your subscription preferences or to unsubscribe: > > https://lists.gnucash.org/mailman/listinfo/gnucash-user > > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > > - > > Please remember to CC this list on all your replies. > > You can do this by using Reply-To-List or Reply-All. > > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Cash Account Question
> On Jan 22, 2019, at 7:24 PM, Lorrie Laskey wrote: > > Looking over my accounts, I see a Cash account with what looks like every > cash transaction I have ever made going back 4 years. Since I don't track > my cash, it is a negative balance and is skewing the balance of my overall > accounts. > > Do I need to track this and if not, how do I delete it without deleting the > individual transitions from their original accounts? What kind of account (i.e. asset, expense, etc.) is it and what’s an example of a transaction involving it? I don’t track cash either and use an “expenses:cash” account to balance cash withdrawals. Is it something like that? Regards, John Ralls ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] New Budget Data Date Range
Hi all, My new budget "Budget Report" is pulling transactions that go back 4 years. Is there a setting that is wrong? It should be for 2019 only. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] New Budget Help
Hi all, I am trying to set up a budget following a YouTube video. See the link below. I created a budget, added my salary category and put the same dollar amount into my checking account category, as instructed, to zero out the budget total at the bottom of the budget sheet. Next is where I am having problems, according to the video, once I enter a few expenses, the "Transfers" category at the bottom of the budget sheet should begin to decrease. However, mine is not changing, though the expenses category total is increasing. Right about minute 6:46 is where this happens in this video. What is wrong? https://www.youtube.com/watch?v=_PMz7SMt68E ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] Cash Account Question
Looking over my accounts, I see a Cash account with what looks like every cash transaction I have ever made going back 4 years. Since I don't track my cash, it is a negative balance and is skewing the balance of my overall accounts. Do I need to track this and if not, how do I delete it without deleting the individual transitions from their original accounts? Lorrie ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Fwd: [gnucash-de] Reversed banlanced accounts setting does not work in reports
Raimund, I saw the same issues recently. The changes you see are purposeful. In order to make the totals add up, the person changed the way that the transaction report handles this setting. As I am not a programmer, I am not able to delve in to try and find a fix for it.I The thread from the last couple of weeks goes into more detail. David T. On January 23, 2019, at 12:45 AM, "Frank H. Ellenberger" wrote: Hi Raimund, forwarding to the english list Regards Frank Weitergeleitete Nachricht Betreff: [gnucash-de] Reversed banlanced accounts setting does not work in reports Datum: Sat, 19 Jan 2019 23:02:47 + Von: Raimund Strehl An: gnucash...@gnucash.org GnuCash 3.2 on Windows 10: Reports such as Transaction report do not respect the "reverse balanced accounts" setting on subtotals for income accounts. Individual transactions will show be shown reversed, but not account subtotals e.g. GnuCash 2.6.21 "reverse balanced accounts" to reverse sign on income accounts Income account X: Transaction A 200 EUR Transaction B 300 EUR Total 500 EUR GnuCash 3.2 "reverse balanced accounts" to reverse sign on income accounts Income account X: Transaction A 200 EUR Transaction B 300 EUR Total -500 EUR I assume it is a bug in the reporting function. This bug seems to have appeared between version 2.6.21 and 3.2 Does anyone know the reason for this or a fix for this? Thanks for any hints Ray ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] Accounting period setup
Hi, I'm just wondering, do people whos financial year runs from July to June, do they change the absolute start date of the year every year for reports? All the relative dates refer to normal years, is these a way to redefine a normal year's start and end dates? So they aren't tied to a year beginning 1st Jan. Lawrence -- Auntie Em: Hate you, Hate Kansas, Taking the dog. -Dorothy. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Lost all my transactions on Gnu cash
YAY! Glad you got it working again!! -derek On Tue, January 22, 2019 4:38 pm, Georgina Hunter-Jones wrote: > Oh, I found it! I had given it a different name from the overall name, and > suddenly it popped up. Thank you so much for all your help and patience. I > now have the accounts back and I am going to copy them immediately. Thank > you. > > On Tue, Jan 22, 2019 at 9:35 PM Georgina Hunter-Jones < > helicopterl...@gmail.com> wrote: > >> No, it didn't. I haven't had that since the beginning. I can now get up >> Accounts: Account Summary but not an entries page. >> >> On Tue, Jan 22, 2019 at 9:32 PM Derek Atkins wrote: >> >>> Did it say Read-Only when you when through File->Open? >>> When does it say it is read-only? >>> >>> -derek >>> >>> On Tue, January 22, 2019 4:27 pm, Georgina Hunter-Jones wrote: >>> > Yes, thank you, that worked in that I now have a page with headings >>> and >>> my >>> > accounts in total numbers. For example, the first one is Assets, next >>> > Dehumidifier, then equity, expenses etc and all except Dehumidifier >>> have >>> > totals, but I still can not get into add new inputs. >>> > >>> > On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: >>> > >>> >> If that's a blank page then that means you have no data open. Did >>> you >>> >> try >>> >> using File -> New File? That might have done it. >>> >> >>> >> Let's start over -- Go to File -> Open and then get to the folder >>> where >>> >> your data file is located and open it. What happens then? >>> >> >>> >> -derek >>> >> >>> >> On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: >>> >> > I tried that but all i get is a blank page with headings. >>> >> > >>> >> > On Tue, 22 Jan 2019 at 21:08, Derek Atkins >>> wrote: >>> >> > >>> >> >> Was it just one account register that was readonly?? Or was it >>> when >>> >> you >>> >> >> opened the file? >>> >> >> >>> >> >> What do you mean by "get back to my accounts"? Are you missing >>> the >>> >> >> Chart >>> >> >> of Accounts Page? If so, use View -> New Accounts Page >>> >> >> >>> >> >> -derek >>> >> >> >>> >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: >>> >> >> > Ah, it said it was read only a page or so ago. I keep fiddling >>> with >>> >> >> it, >>> >> >> > hoping to get back to my accounts, but I seem to be making it >>> >> worse. >>> >> >> If I >>> >> >> > can get the read only thing back I’ll take a screenshot. Sorry. >>> I’m >>> >> >> > getting >>> >> >> > a bit lost here. >>> >> >> > >>> >> >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins >>> wrote: >>> >> >> > >>> >> >> >> Hi, >>> >> >> >> >>> >> >> >> So if that didn't work -- how is it telling you that it is >>> >> read-only? >>> >> >> >> Could you supply a screen shot? >>> >> >> >> Maybe a step-by-step of what you do and what happens? >>> >> >> >> >>> >> >> >> I'm at a loss for what else would cause a read-only situation >>> here >>> >> >> >> except, >>> >> >> >> perhaps, you opening a placeholder account. >>> >> >> >> >>> >> >> >> Thanks, >>> >> >> >> >>> >> >> >> -derek >>> >> >> >> >>> >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >>> >> >> >> > Thanks, sadly it did not work. Sorry that replies are so >>> slow, >>> >> Im >>> >> >> not >>> >> >> >> > always with the old computer. Thanks >>> >> >> >> > >>> >> >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >>> >> >> >> > helicopterl...@gmail.com> wrote: >>> >> >> >> > >>> >> >> >> >> Thanks, i’ll Try that. Georgina >>> >> >> >> >> >>> >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins >>> >> > >>> >> >> wrote: >>> >> >> >> >> >>> >> >> >> >>> Dear Georgina, >>> >> >> >> >>> >>> >> >> >> >>> [snip] >>> >> >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >>> >> >> >> >>> Hunter-Jones: >>> >> >> >> >>> >> Dear Geert, >>> >> >> >> >>> >> Thank you, that helped to a certain extent. I can now >>> see >>> >> >> lines >>> >> >> >> of >>> >> >> >> >>> >> information with the account details. However, it >>> appears >>> >> to >>> >> >> be >>> >> >> >> >>> 'read >>> >> >> >> >>> >> only' >>> >> >> >> >>> >> and I cannot enter any further data. I also cannot see >>> >> >> anything >>> >> >> >> more >>> >> >> >> >>> >> than >>> >> >> >> >>> >> an overall view of the account, ie no dates etc. >>> >> >> >> >>> >> >>> >> >> >> >>> >> Anything I can do to change that? Thank you very much >>> for >>> >> your >>> >> >> >> help >>> >> >> >> >>> so >>> >> >> >> >>> >> far. >>> >> >> >> >>> >> Best wishes, Georgina >>> >> >> >> >>> >>> >> >> >> >>> This sounds like it could be a permissions problem, >>> although >>> >> I'm >>> >> >> not >>> >> >> >> >>> familiar enough with MacOS permissions to know how best to >>> fix >>> >> >> it. >>> >> >> >> >>> Hopefully a MacOS expert will come in. But it really >>> sounds >>> >> like >>> >> >> >> when >>> >> >> >> >>> you >>> >> >> >> >>> copied your data file you put it into a directory that >>> your >>> >> >> current >>> >> >> >> >>> user >>>
Re: [GNC] Lost all my transactions on Gnu cash
Hi, I'm sorry, I don't understand what you mean by your last sentence, "I can now get up Accounts: Account Summary but not an entries page."? Could you explain further? Maybe with a screen shot? Thanks, -derek On Tue, January 22, 2019 4:35 pm, Georgina Hunter-Jones wrote: > No, it didn't. I haven't had that since the beginning. I can now get up > Accounts: Account Summary but not an entries page. > > On Tue, Jan 22, 2019 at 9:32 PM Derek Atkins wrote: > >> Did it say Read-Only when you when through File->Open? >> When does it say it is read-only? >> >> -derek >> >> On Tue, January 22, 2019 4:27 pm, Georgina Hunter-Jones wrote: >> > Yes, thank you, that worked in that I now have a page with headings >> and >> my >> > accounts in total numbers. For example, the first one is Assets, next >> > Dehumidifier, then equity, expenses etc and all except Dehumidifier >> have >> > totals, but I still can not get into add new inputs. >> > >> > On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: >> > >> >> If that's a blank page then that means you have no data open. Did >> you >> >> try >> >> using File -> New File? That might have done it. >> >> >> >> Let's start over -- Go to File -> Open and then get to the folder >> where >> >> your data file is located and open it. What happens then? >> >> >> >> -derek >> >> >> >> On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: >> >> > I tried that but all i get is a blank page with headings. >> >> > >> >> > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: >> >> > >> >> >> Was it just one account register that was readonly?? Or was it >> when >> >> you >> >> >> opened the file? >> >> >> >> >> >> What do you mean by "get back to my accounts"? Are you missing >> the >> >> >> Chart >> >> >> of Accounts Page? If so, use View -> New Accounts Page >> >> >> >> >> >> -derek >> >> >> >> >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: >> >> >> > Ah, it said it was read only a page or so ago. I keep fiddling >> with >> >> >> it, >> >> >> > hoping to get back to my accounts, but I seem to be making it >> >> worse. >> >> >> If I >> >> >> > can get the read only thing back I’ll take a screenshot. Sorry. >> I’m >> >> >> > getting >> >> >> > a bit lost here. >> >> >> > >> >> >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins >> wrote: >> >> >> > >> >> >> >> Hi, >> >> >> >> >> >> >> >> So if that didn't work -- how is it telling you that it is >> >> read-only? >> >> >> >> Could you supply a screen shot? >> >> >> >> Maybe a step-by-step of what you do and what happens? >> >> >> >> >> >> >> >> I'm at a loss for what else would cause a read-only situation >> here >> >> >> >> except, >> >> >> >> perhaps, you opening a placeholder account. >> >> >> >> >> >> >> >> Thanks, >> >> >> >> >> >> >> >> -derek >> >> >> >> >> >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >> >> >> >> > Thanks, sadly it did not work. Sorry that replies are so >> slow, >> >> Im >> >> >> not >> >> >> >> > always with the old computer. Thanks >> >> >> >> > >> >> >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >> >> >> >> > helicopterl...@gmail.com> wrote: >> >> >> >> > >> >> >> >> >> Thanks, i’ll Try that. Georgina >> >> >> >> >> >> >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins >> >> >> >> wrote: >> >> >> >> >> >> >> >> >> >>> Dear Georgina, >> >> >> >> >>> >> >> >> >> >>> [snip] >> >> >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >> >> >> >> >>> Hunter-Jones: >> >> >> >> >>> >> Dear Geert, >> >> >> >> >>> >> Thank you, that helped to a certain extent. I can now >> see >> >> >> lines >> >> >> >> of >> >> >> >> >>> >> information with the account details. However, it >> appears >> >> to >> >> >> be >> >> >> >> >>> 'read >> >> >> >> >>> >> only' >> >> >> >> >>> >> and I cannot enter any further data. I also cannot see >> >> >> anything >> >> >> >> more >> >> >> >> >>> >> than >> >> >> >> >>> >> an overall view of the account, ie no dates etc. >> >> >> >> >>> >> >> >> >> >> >>> >> Anything I can do to change that? Thank you very much >> for >> >> your >> >> >> >> help >> >> >> >> >>> so >> >> >> >> >>> >> far. >> >> >> >> >>> >> Best wishes, Georgina >> >> >> >> >>> >> >> >> >> >>> This sounds like it could be a permissions problem, >> although >> >> I'm >> >> >> not >> >> >> >> >>> familiar enough with MacOS permissions to know how best to >> fix >> >> >> it. >> >> >> >> >>> Hopefully a MacOS expert will come in. But it really >> sounds >> >> like >> >> >> >> when >> >> >> >> >>> you >> >> >> >> >>> copied your data file you put it into a directory that your >> >> >> current >> >> >> >> >>> user >> >> >> >> >>> does not have access to write new files. >> >> >> >> >>> >> >> >> >> >>> Can you try this: >> >> >> >> >>> >> >> >> >> >>> Make a new folder from the Finder >> >> >> >> >>> Copy your data file to the new Folder >> >> >> >> >>> Open GnuCash >> >> >> >> >>> File -> Open the data file from the new folder >> >>
Re: [GNC] Lost all my transactions on Gnu cash
Did it say Read-Only when you when through File->Open? When does it say it is read-only? -derek On Tue, January 22, 2019 4:27 pm, Georgina Hunter-Jones wrote: > Yes, thank you, that worked in that I now have a page with headings and my > accounts in total numbers. For example, the first one is Assets, next > Dehumidifier, then equity, expenses etc and all except Dehumidifier have > totals, but I still can not get into add new inputs. > > On Tue, Jan 22, 2019 at 9:16 PM Derek Atkins wrote: > >> If that's a blank page then that means you have no data open. Did you >> try >> using File -> New File? That might have done it. >> >> Let's start over -- Go to File -> Open and then get to the folder where >> your data file is located and open it. What happens then? >> >> -derek >> >> On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: >> > I tried that but all i get is a blank page with headings. >> > >> > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: >> > >> >> Was it just one account register that was readonly?? Or was it when >> you >> >> opened the file? >> >> >> >> What do you mean by "get back to my accounts"? Are you missing the >> >> Chart >> >> of Accounts Page? If so, use View -> New Accounts Page >> >> >> >> -derek >> >> >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: >> >> > Ah, it said it was read only a page or so ago. I keep fiddling with >> >> it, >> >> > hoping to get back to my accounts, but I seem to be making it >> worse. >> >> If I >> >> > can get the read only thing back I’ll take a screenshot. Sorry. I’m >> >> > getting >> >> > a bit lost here. >> >> > >> >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: >> >> > >> >> >> Hi, >> >> >> >> >> >> So if that didn't work -- how is it telling you that it is >> read-only? >> >> >> Could you supply a screen shot? >> >> >> Maybe a step-by-step of what you do and what happens? >> >> >> >> >> >> I'm at a loss for what else would cause a read-only situation here >> >> >> except, >> >> >> perhaps, you opening a placeholder account. >> >> >> >> >> >> Thanks, >> >> >> >> >> >> -derek >> >> >> >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >> >> >> > Thanks, sadly it did not work. Sorry that replies are so slow, >> Im >> >> not >> >> >> > always with the old computer. Thanks >> >> >> > >> >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >> >> >> > helicopterl...@gmail.com> wrote: >> >> >> > >> >> >> >> Thanks, i’ll Try that. Georgina >> >> >> >> >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins >> >> wrote: >> >> >> >> >> >> >> >>> Dear Georgina, >> >> >> >>> >> >> >> >>> [snip] >> >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >> >> >> >>> Hunter-Jones: >> >> >> >>> >> Dear Geert, >> >> >> >>> >> Thank you, that helped to a certain extent. I can now see >> >> lines >> >> >> of >> >> >> >>> >> information with the account details. However, it appears >> to >> >> be >> >> >> >>> 'read >> >> >> >>> >> only' >> >> >> >>> >> and I cannot enter any further data. I also cannot see >> >> anything >> >> >> more >> >> >> >>> >> than >> >> >> >>> >> an overall view of the account, ie no dates etc. >> >> >> >>> >> >> >> >> >>> >> Anything I can do to change that? Thank you very much for >> your >> >> >> help >> >> >> >>> so >> >> >> >>> >> far. >> >> >> >>> >> Best wishes, Georgina >> >> >> >>> >> >> >> >>> This sounds like it could be a permissions problem, although >> I'm >> >> not >> >> >> >>> familiar enough with MacOS permissions to know how best to fix >> >> it. >> >> >> >>> Hopefully a MacOS expert will come in. But it really sounds >> like >> >> >> when >> >> >> >>> you >> >> >> >>> copied your data file you put it into a directory that your >> >> current >> >> >> >>> user >> >> >> >>> does not have access to write new files. >> >> >> >>> >> >> >> >>> Can you try this: >> >> >> >>> >> >> >> >>> Make a new folder from the Finder >> >> >> >>> Copy your data file to the new Folder >> >> >> >>> Open GnuCash >> >> >> >>> File -> Open the data file from the new folder >> >> >> >>> >> >> >> >>> Does this help? >> >> >> >>> >> >> >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens >> >> >> >>> >> >> >> >> >>> >> >> >> >> >>> >> wrote: >> >> >> >>> >> > A few other suggestions: >> >> >> >>> >> > >> >> >> >>> >> > 1. Which files did you transfer ? While that sounds >> obvious, >> >> it >> >> >> is >> >> >> >>> not >> >> >> >>> >> > always >> >> >> >>> >> > so. So this question is to ensure you really did copy >> your >> >> >> gnucash >> >> >> >>> >> data >> >> >> >>> >> > file >> >> >> >>> >> > to the older computer. >> >> >> >>> >> > >> >> >> >>> >> > 2. How have you tried to open your gnucash data file ? >> It's >> >> >> >>> important >> >> >> >>> >> to >> >> >> >>> >> > realize that on MacOS double-clicking on a random gnucash >> >> data >> >> >> >>> file >> >> >> >>> >> > doesn't >> >> >> >>> >> > necessarily mean that file will be opened. G
Re: [GNC] Lost all my transactions on Gnu cash
If that's a blank page then that means you have no data open. Did you try using File -> New File? That might have done it. Let's start over -- Go to File -> Open and then get to the folder where your data file is located and open it. What happens then? -derek On Tue, January 22, 2019 4:11 pm, Georgina Hunter-Jones wrote: > I tried that but all i get is a blank page with headings. > > On Tue, 22 Jan 2019 at 21:08, Derek Atkins wrote: > >> Was it just one account register that was readonly?? Or was it when you >> opened the file? >> >> What do you mean by "get back to my accounts"? Are you missing the >> Chart >> of Accounts Page? If so, use View -> New Accounts Page >> >> -derek >> >> On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: >> > Ah, it said it was read only a page or so ago. I keep fiddling with >> it, >> > hoping to get back to my accounts, but I seem to be making it worse. >> If I >> > can get the read only thing back I’ll take a screenshot. Sorry. I’m >> > getting >> > a bit lost here. >> > >> > On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: >> > >> >> Hi, >> >> >> >> So if that didn't work -- how is it telling you that it is read-only? >> >> Could you supply a screen shot? >> >> Maybe a step-by-step of what you do and what happens? >> >> >> >> I'm at a loss for what else would cause a read-only situation here >> >> except, >> >> perhaps, you opening a placeholder account. >> >> >> >> Thanks, >> >> >> >> -derek >> >> >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >> >> > Thanks, sadly it did not work. Sorry that replies are so slow, Im >> not >> >> > always with the old computer. Thanks >> >> > >> >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >> >> > helicopterl...@gmail.com> wrote: >> >> > >> >> >> Thanks, i’ll Try that. Georgina >> >> >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins >> wrote: >> >> >> >> >> >>> Dear Georgina, >> >> >>> >> >> >>> [snip] >> >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >> >> >>> Hunter-Jones: >> >> >>> >> Dear Geert, >> >> >>> >> Thank you, that helped to a certain extent. I can now see >> lines >> >> of >> >> >>> >> information with the account details. However, it appears to >> be >> >> >>> 'read >> >> >>> >> only' >> >> >>> >> and I cannot enter any further data. I also cannot see >> anything >> >> more >> >> >>> >> than >> >> >>> >> an overall view of the account, ie no dates etc. >> >> >>> >> >> >> >>> >> Anything I can do to change that? Thank you very much for your >> >> help >> >> >>> so >> >> >>> >> far. >> >> >>> >> Best wishes, Georgina >> >> >>> >> >> >>> This sounds like it could be a permissions problem, although I'm >> not >> >> >>> familiar enough with MacOS permissions to know how best to fix >> it. >> >> >>> Hopefully a MacOS expert will come in. But it really sounds like >> >> when >> >> >>> you >> >> >>> copied your data file you put it into a directory that your >> current >> >> >>> user >> >> >>> does not have access to write new files. >> >> >>> >> >> >>> Can you try this: >> >> >>> >> >> >>> Make a new folder from the Finder >> >> >>> Copy your data file to the new Folder >> >> >>> Open GnuCash >> >> >>> File -> Open the data file from the new folder >> >> >>> >> >> >>> Does this help? >> >> >>> >> >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens >> >> >>> >> >> >> >>> >> >> >> >>> >> wrote: >> >> >>> >> > A few other suggestions: >> >> >>> >> > >> >> >>> >> > 1. Which files did you transfer ? While that sounds obvious, >> it >> >> is >> >> >>> not >> >> >>> >> > always >> >> >>> >> > so. So this question is to ensure you really did copy your >> >> gnucash >> >> >>> >> data >> >> >>> >> > file >> >> >>> >> > to the older computer. >> >> >>> >> > >> >> >>> >> > 2. How have you tried to open your gnucash data file ? It's >> >> >>> important >> >> >>> >> to >> >> >>> >> > realize that on MacOS double-clicking on a random gnucash >> data >> >> >>> file >> >> >>> >> > doesn't >> >> >>> >> > necessarily mean that file will be opened. GnuCash will >> always >> >> >>> reopen >> >> >>> >> that >> >> >>> >> > previously last opened file (which may be different from the >> >> one >> >> >>> you >> >> >>> >> > double- >> >> >>> >> > clicked on). To fix that you can: >> >> >>> >> > - Start the gnucash application >> >> >>> >> > - Select File->Open >> >> >>> >> > - Navigate to your gnucash data file and open it this way >> >> >>> >> > >> >> >>> >> > Will that bring your data back ? >> >> >>> >> > >> >> >>> >> > Regards, >> >> >>> >> > >> >> >>> >> > Geert >> >> >>> >> >> >>> > Please remember to CC this list on all your replies. >> >> >>> > You can do this by using Reply-To-List or Reply-All. >> >> >>> >> >> >>> -derek >> >> >>> >> >> >>> -- >> >> >>>Derek Atkins 617-623-3745 >> >> >>>de...@ihtfp.com www.ihtfp.com >> >> >>>Computer and Internet Security Consultant >> >> >>> >> >> >>> >> >> > >> >> >>
Re: [GNC] Lost all my transactions on Gnu cash
Was it just one account register that was readonly?? Or was it when you opened the file? What do you mean by "get back to my accounts"? Are you missing the Chart of Accounts Page? If so, use View -> New Accounts Page -derek On Tue, January 22, 2019 4:04 pm, Georgina Hunter-Jones wrote: > Ah, it said it was read only a page or so ago. I keep fiddling with it, > hoping to get back to my accounts, but I seem to be making it worse. If I > can get the read only thing back I’ll take a screenshot. Sorry. I’m > getting > a bit lost here. > > On Tue, 22 Jan 2019 at 21:00, Derek Atkins wrote: > >> Hi, >> >> So if that didn't work -- how is it telling you that it is read-only? >> Could you supply a screen shot? >> Maybe a step-by-step of what you do and what happens? >> >> I'm at a loss for what else would cause a read-only situation here >> except, >> perhaps, you opening a placeholder account. >> >> Thanks, >> >> -derek >> >> On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: >> > Thanks, sadly it did not work. Sorry that replies are so slow, Im not >> > always with the old computer. Thanks >> > >> > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < >> > helicopterl...@gmail.com> wrote: >> > >> >> Thanks, i’ll Try that. Georgina >> >> >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins wrote: >> >> >> >>> Dear Georgina, >> >>> >> >>> [snip] >> >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >> >>> Hunter-Jones: >> >>> >> Dear Geert, >> >>> >> Thank you, that helped to a certain extent. I can now see lines >> of >> >>> >> information with the account details. However, it appears to be >> >>> 'read >> >>> >> only' >> >>> >> and I cannot enter any further data. I also cannot see anything >> more >> >>> >> than >> >>> >> an overall view of the account, ie no dates etc. >> >>> >> >> >>> >> Anything I can do to change that? Thank you very much for your >> help >> >>> so >> >>> >> far. >> >>> >> Best wishes, Georgina >> >>> >> >>> This sounds like it could be a permissions problem, although I'm not >> >>> familiar enough with MacOS permissions to know how best to fix it. >> >>> Hopefully a MacOS expert will come in. But it really sounds like >> when >> >>> you >> >>> copied your data file you put it into a directory that your current >> >>> user >> >>> does not have access to write new files. >> >>> >> >>> Can you try this: >> >>> >> >>> Make a new folder from the Finder >> >>> Copy your data file to the new Folder >> >>> Open GnuCash >> >>> File -> Open the data file from the new folder >> >>> >> >>> Does this help? >> >>> >> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens >> >>> >> >> >>> >> >> >>> >> wrote: >> >>> >> > A few other suggestions: >> >>> >> > >> >>> >> > 1. Which files did you transfer ? While that sounds obvious, it >> is >> >>> not >> >>> >> > always >> >>> >> > so. So this question is to ensure you really did copy your >> gnucash >> >>> >> data >> >>> >> > file >> >>> >> > to the older computer. >> >>> >> > >> >>> >> > 2. How have you tried to open your gnucash data file ? It's >> >>> important >> >>> >> to >> >>> >> > realize that on MacOS double-clicking on a random gnucash data >> >>> file >> >>> >> > doesn't >> >>> >> > necessarily mean that file will be opened. GnuCash will always >> >>> reopen >> >>> >> that >> >>> >> > previously last opened file (which may be different from the >> one >> >>> you >> >>> >> > double- >> >>> >> > clicked on). To fix that you can: >> >>> >> > - Start the gnucash application >> >>> >> > - Select File->Open >> >>> >> > - Navigate to your gnucash data file and open it this way >> >>> >> > >> >>> >> > Will that bring your data back ? >> >>> >> > >> >>> >> > Regards, >> >>> >> > >> >>> >> > Geert >> >>> >> >>> > Please remember to CC this list on all your replies. >> >>> > You can do this by using Reply-To-List or Reply-All. >> >>> >> >>> -derek >> >>> >> >>> -- >> >>>Derek Atkins 617-623-3745 >> >>>de...@ihtfp.com www.ihtfp.com >> >>>Computer and Internet Security Consultant >> >>> >> >>> >> > >> >> >> -- >>Derek Atkins 617-623-3745 >>de...@ihtfp.com www.ihtfp.com >>Computer and Internet Security Consultant >> >> > -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] Lost all my transactions on Gnu cash
Hi, So if that didn't work -- how is it telling you that it is read-only? Could you supply a screen shot? Maybe a step-by-step of what you do and what happens? I'm at a loss for what else would cause a read-only situation here except, perhaps, you opening a placeholder account. Thanks, -derek On Tue, January 22, 2019 3:55 pm, Georgina Hunter-Jones wrote: > Thanks, sadly it did not work. Sorry that replies are so slow, Im not > always with the old computer. Thanks > > On Tue, Jan 15, 2019 at 2:38 PM Georgina Hunter-Jones < > helicopterl...@gmail.com> wrote: > >> Thanks, i’ll Try that. Georgina >> >> On Tue, Jan 15, 2019 at 2:00 PM Derek Atkins wrote: >> >>> Dear Georgina, >>> >>> [snip] >>> > Op dinsdag 15 januari 2019 12:52:50 CET schreef Georgina >>> Hunter-Jones: >>> >> Dear Geert, >>> >> Thank you, that helped to a certain extent. I can now see lines of >>> >> information with the account details. However, it appears to be >>> 'read >>> >> only' >>> >> and I cannot enter any further data. I also cannot see anything more >>> >> than >>> >> an overall view of the account, ie no dates etc. >>> >> >>> >> Anything I can do to change that? Thank you very much for your help >>> so >>> >> far. >>> >> Best wishes, Georgina >>> >>> This sounds like it could be a permissions problem, although I'm not >>> familiar enough with MacOS permissions to know how best to fix it. >>> Hopefully a MacOS expert will come in. But it really sounds like when >>> you >>> copied your data file you put it into a directory that your current >>> user >>> does not have access to write new files. >>> >>> Can you try this: >>> >>> Make a new folder from the Finder >>> Copy your data file to the new Folder >>> Open GnuCash >>> File -> Open the data file from the new folder >>> >>> Does this help? >>> >>> >> On Tue, Jan 15, 2019 at 8:31 AM Geert Janssens >>> >> >>> >> >>> >> wrote: >>> >> > A few other suggestions: >>> >> > >>> >> > 1. Which files did you transfer ? While that sounds obvious, it is >>> not >>> >> > always >>> >> > so. So this question is to ensure you really did copy your gnucash >>> >> data >>> >> > file >>> >> > to the older computer. >>> >> > >>> >> > 2. How have you tried to open your gnucash data file ? It's >>> important >>> >> to >>> >> > realize that on MacOS double-clicking on a random gnucash data >>> file >>> >> > doesn't >>> >> > necessarily mean that file will be opened. GnuCash will always >>> reopen >>> >> that >>> >> > previously last opened file (which may be different from the one >>> you >>> >> > double- >>> >> > clicked on). To fix that you can: >>> >> > - Start the gnucash application >>> >> > - Select File->Open >>> >> > - Navigate to your gnucash data file and open it this way >>> >> > >>> >> > Will that bring your data back ? >>> >> > >>> >> > Regards, >>> >> > >>> >> > Geert >>> >>> > Please remember to CC this list on all your replies. >>> > You can do this by using Reply-To-List or Reply-All. >>> >>> -derek >>> >>> -- >>>Derek Atkins 617-623-3745 >>>de...@ihtfp.com www.ihtfp.com >>>Computer and Internet Security Consultant >>> >>> > -- Derek Atkins 617-623-3745 de...@ihtfp.com www.ihtfp.com Computer and Internet Security Consultant ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
[GNC] Fwd: [gnucash-de] Reversed banlanced accounts setting does not work in reports
Hi Raimund, forwarding to the english list Regards Frank Weitergeleitete Nachricht Betreff: [gnucash-de] Reversed banlanced accounts setting does not work in reports Datum: Sat, 19 Jan 2019 23:02:47 + Von: Raimund Strehl An: gnucash...@gnucash.org GnuCash 3.2 on Windows 10: Reports such as Transaction report do not respect the "reverse balanced accounts" setting on subtotals for income accounts. Individual transactions will show be shown reversed, but not account subtotals e.g. GnuCash 2.6.21 "reverse balanced accounts" to reverse sign on income accounts Income account X: Transaction A 200 EUR Transaction B 300 EUR Total 500 EUR GnuCash 3.2 "reverse balanced accounts" to reverse sign on income accounts Income account X: Transaction A 200 EUR Transaction B 300 EUR Total -500 EUR I assume it is a bug in the reporting function. This bug seems to have appeared between version 2.6.21 and 3.2 Does anyone know the reason for this or a fix for this? Thanks for any hints Ray ___ gnucash-de mailing list gnucash...@gnucash.org https://lists.gnucash.org/mailman/listinfo/gnucash-de ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] [GNC-dev] Debian package
On Tue, 22 Jan 2019 at 15:34, Stephen M. Butler wrote: > > Looks like the dependency list from the mainline is missing a few > entries. I'll check that out. > > Also, here are the files for the debian folder used in the build. Any > suggestions or corrections would be appreciated. Wondering if there is > a way to package this all together instead of having three .deb files? Sorry, I don't really know much about deb files. Colin Colin > > --Steve > > > -- > Stephen M Butler, PMP, PSM > stephen.m.butle...@gmail.com > kg...@arrl.net > 253-350-0166 > --- > GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8 > > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] [GNC-dev] Debian package
Then I promptly hit the Send button without pasting the link for the debian files. Must be too early in the morning! https://drive.google.com/open?id=1VJmtb-Fx00PQna4yQoYm49C88Bi0hneI --Steve (or too late in the evening. I sometimes think they are one and the same!) On 1/22/19 7:34 AM, Stephen M. Butler wrote: > On 1/22/19 2:29 AM, Colin Law wrote: >> Sorry for delay, been otherwise engaged. >> On a live Ubuntu 18.10 session running off the install image I started >> by attempting to install gnucash_3.4_amd64.deb >> >> ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash_3.4_amd64.deb >> Selecting previously unselected package gnucash. >> (Reading database ... 149974 files and directories currently installed.) >> Preparing to unpack .../gnucash_3.4_amd64.deb ... >> Unpacking gnucash (1:3.4) ... >> dpkg: dependency problems prevent configuration of gnucash: >> gnucash depends on gnucash-common (= 1:3.4); however: >> Package gnucash-common is not installed. >> gnucash depends on libaqbanking35-plugins; however: >> Package libaqbanking35-plugins is not installed. >> gnucash depends on guile-2.2 | guile-2.0; however: >> Package guile-2.2 is not installed. >> Package guile-2.0 is not installed. >> gnucash depends on libfinance-quote-perl; however: >> Package libfinance-quote-perl is not installed. >> gnucash depends on libhtml-tableextract-perl; however: >> Package libhtml-tableextract-perl is not installed. >> gnucash depends on libcrypt-ssleay-perl; however: >> Package libcrypt-ssleay-perl is not installed. >> gnucash depends on libdate-manip-perl; however: >> Package libdate-manip-perl is not installed. >> >> dpkg: error processing package gnucash (--install): >> dependency problems - leaving unconfigured >> Errors were encountered while processing: >> gnucash >> >> I then tried gnucash_3.4_amd64.deb >> >> ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash-common_3.4_all.deb >> Selecting previously unselected package gnucash-common. >> (Reading database ... 149977 files and directories currently installed.) >> Preparing to unpack .../gnucash-common_3.4_all.deb ... >> Unpacking gnucash-common (1:3.4) ... >> dpkg: dependency problems prevent configuration of gnucash-common: >> gnucash-common depends on libjs-jquery; however: >> Package libjs-jquery is not installed. >> >> dpkg: error processing package gnucash-common (--install): >> dependency problems - leaving unconfigured >> Errors were encountered while processing: >> gnucash-common > Thanks Colin. No worries -- I've busy on other things also. > > Looks like the dependency list from the mainline is missing a few > entries. I'll check that out. > > Also, here are the files for the debian folder used in the build. Any > suggestions or corrections would be appreciated. Wondering if there is > a way to package this all together instead of having three .deb files? > > --Steve > > -- Stephen M Butler, PMP, PSM stephen.m.butle...@gmail.com kg...@arrl.net 253-350-0166 --- GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8 ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] [GNC-dev] Debian package
On 1/22/19 2:29 AM, Colin Law wrote: > Sorry for delay, been otherwise engaged. > On a live Ubuntu 18.10 session running off the install image I started > by attempting to install gnucash_3.4_amd64.deb > > ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash_3.4_amd64.deb > Selecting previously unselected package gnucash. > (Reading database ... 149974 files and directories currently installed.) > Preparing to unpack .../gnucash_3.4_amd64.deb ... > Unpacking gnucash (1:3.4) ... > dpkg: dependency problems prevent configuration of gnucash: > gnucash depends on gnucash-common (= 1:3.4); however: > Package gnucash-common is not installed. > gnucash depends on libaqbanking35-plugins; however: > Package libaqbanking35-plugins is not installed. > gnucash depends on guile-2.2 | guile-2.0; however: > Package guile-2.2 is not installed. > Package guile-2.0 is not installed. > gnucash depends on libfinance-quote-perl; however: > Package libfinance-quote-perl is not installed. > gnucash depends on libhtml-tableextract-perl; however: > Package libhtml-tableextract-perl is not installed. > gnucash depends on libcrypt-ssleay-perl; however: > Package libcrypt-ssleay-perl is not installed. > gnucash depends on libdate-manip-perl; however: > Package libdate-manip-perl is not installed. > > dpkg: error processing package gnucash (--install): > dependency problems - leaving unconfigured > Errors were encountered while processing: > gnucash > > I then tried gnucash_3.4_amd64.deb > > ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash-common_3.4_all.deb > Selecting previously unselected package gnucash-common. > (Reading database ... 149977 files and directories currently installed.) > Preparing to unpack .../gnucash-common_3.4_all.deb ... > Unpacking gnucash-common (1:3.4) ... > dpkg: dependency problems prevent configuration of gnucash-common: > gnucash-common depends on libjs-jquery; however: > Package libjs-jquery is not installed. > > dpkg: error processing package gnucash-common (--install): > dependency problems - leaving unconfigured > Errors were encountered while processing: > gnucash-common Thanks Colin. No worries -- I've busy on other things also. Looks like the dependency list from the mainline is missing a few entries. I'll check that out. Also, here are the files for the debian folder used in the build. Any suggestions or corrections would be appreciated. Wondering if there is a way to package this all together instead of having three .deb files? --Steve -- Stephen M Butler, PMP, PSM stephen.m.butle...@gmail.com kg...@arrl.net 253-350-0166 --- GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8 ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] How do I access the forum without using Nabble
Mike, There should also be no problem accessing the list from Nabble either. Creating a post from Nabble also creates an email to the mail-list. The confusion is perhaps that you need to be registered separately for the mailing list and for Nabble. I use the same credentials to do both and am then able to post be email or using Nabble without any problem. The only restriction with Nabble seems to be that mail list users sometimes cannot see previous posts in a thread. In my case it is becausee I clear my emails from the list out to an archive almost daily to avoid clogging up my inbox and missing other email. On Sat, 2019-01-19 at 04:10 -0600, john_mike wrote: > I am very confused as to how I am meant to access the forum. I am posting > this via nabble. I seem to remember that that isn't necessary. That being > the case how am I meant to access it and create a new thread. > > > > -- > Sent from: http://gnucash.1415818.n4.nabble.com/GnuCash-User-f1415819.html > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: [GNC] [GNC-dev] Debian package
Sorry for delay, been otherwise engaged. On a live Ubuntu 18.10 session running off the install image I started by attempting to install gnucash_3.4_amd64.deb ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash_3.4_amd64.deb Selecting previously unselected package gnucash. (Reading database ... 149974 files and directories currently installed.) Preparing to unpack .../gnucash_3.4_amd64.deb ... Unpacking gnucash (1:3.4) ... dpkg: dependency problems prevent configuration of gnucash: gnucash depends on gnucash-common (= 1:3.4); however: Package gnucash-common is not installed. gnucash depends on libaqbanking35-plugins; however: Package libaqbanking35-plugins is not installed. gnucash depends on guile-2.2 | guile-2.0; however: Package guile-2.2 is not installed. Package guile-2.0 is not installed. gnucash depends on libfinance-quote-perl; however: Package libfinance-quote-perl is not installed. gnucash depends on libhtml-tableextract-perl; however: Package libhtml-tableextract-perl is not installed. gnucash depends on libcrypt-ssleay-perl; however: Package libcrypt-ssleay-perl is not installed. gnucash depends on libdate-manip-perl; however: Package libdate-manip-perl is not installed. dpkg: error processing package gnucash (--install): dependency problems - leaving unconfigured Errors were encountered while processing: gnucash I then tried gnucash_3.4_amd64.deb ubuntu@ubuntu:~$ sudo dpkg -i Downloads/gnucash-common_3.4_all.deb Selecting previously unselected package gnucash-common. (Reading database ... 149977 files and directories currently installed.) Preparing to unpack .../gnucash-common_3.4_all.deb ... Unpacking gnucash-common (1:3.4) ... dpkg: dependency problems prevent configuration of gnucash-common: gnucash-common depends on libjs-jquery; however: Package libjs-jquery is not installed. dpkg: error processing package gnucash-common (--install): dependency problems - leaving unconfigured Errors were encountered while processing: gnucash-common On Mon, 21 Jan 2019 at 07:10, Stephen M. Butler wrote: > > Please try these before I take the next step of figuring out how to > populate a ppa up on Launchpad. > > GnuCash-3.4 > https://drive.google.com/open?id=1fV_fURy6c77e7gf6S41lTacM7dFyy7VD > > > GnuCash-3.4-39 (current maint) > https://drive.google.com/open?id=1SO2xkPICKEpSQCvJLW6CnBVrzgvTEyHQ > > > Thanks to all who stepped forward with suggestions. > > And to preempt others -- Yes, I do have a kite. And I use a dry suite > when jumping into lakes! <> > > --Steve > > -- > Stephen M Butler, PMP, PSM > stephen.m.butle...@gmail.com > kg...@arrl.net > 253-350-0166 > --- > GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8 > > ___ > gnucash-devel mailing list > gnucash-de...@gnucash.org > https://lists.gnucash.org/mailman/listinfo/gnucash-devel ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
