Re: [google-appengine] Can't integrate GCS to existing AppEngine project
Vinny, Ultimately, as you adviced, I went to APIs console, selected my project (created by integrating GAE app), and switched to ON Cloud Storage (it was OFF). Now Cloud Storage buckets are creating fine. Answers for your questions: When you tried another project, was that a project created by the New Project button on the Google Cloud Console, or by integrating an App Engine application into the console? By New Project button from Cloud Console. Now, I've tried to enable billing for that project and everything works fine. Can you try this: Go to the cloud console and create a new project. Set up billing on that project. Then go to Cloud Storage and try to set up a bucket. Done. New project with billing enabled works fine. Thanks a lot for your help! Den -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
Re: [google-appengine] Redirect loop on sign-up page
Thanks! But the problem here is that I've a app in App Engine :( Best. El viernes, 30 de agosto de 2013 04:41:28 UTC+2, Craig Rayner escribió: Hi, The problem in my case turned out to be two thing. One was that an app I had installed was withdrawn from the Store. In this case, in the Admin panel you will see the HASH key of the app, rather than the name of the App. Remove the HashKey entry from your Admin panel deployment. The second was a simple one, make sure the app in question is not being deployed at the OU level independant of the domain. e.g Removed at Domain level of the OU structure, but some OU's do not inherit, and the App is still deployed at the OU. ___ I greet you with the great words, Grace and Peace Craig Rayner Tien Shan International School Technology Integration PH: +7 727 344 1266 MOB: +7 777 243 1188 On 30 August 2013 05:33, pa...@internetandmultimedialtd.com javascript: wrote: Sorry, can you explain this a little more? What does login in the control panel for the account? Thanks! El martes, 21 de mayo de 2013 20:18:50 UTC+2, Thomas Dwyer III escribió: Ditto. The only solution I found so far is logging out of all my accounts, and then logging into the control panel for just the account I want to administer. This problem has been around for a long time. Frustrating. :-( Tom.III On Wednesday, May 8, 2013 2:23:54 PM UTC-7, Stefan Burth wrote: Hi Takashi I have exactly the same problem as Grant, everytime I log in to google apps I have to choose between all my email adresses and when I choose one all I get is the following message. can you help me? https://www.google.com/a/**cpanel/hypotheken-auktion.ch/** Organization/GetCustomer?pli=1https://www.google.com/a/cpanel/hypotheken-auktion.ch/Organization/GetCustomer?pli=1 Error 302 thanks, Stefan Am Mittwoch, 5. September 2012 07:50:52 UTC+2 schrieb Takashi Matsuo (Google): Hi Grant, On Wed, Sep 5, 2012 at 2:39 PM, Takashi Matsuo tma...@google.comwrote: Hi Grant, Is gr...@grantheaslip.ca the e-mail address which you're using when the issue occurs? Have you created any app engine application with this account before you deleted the account? I figured out that the account 'gr...@grantheaslip.ca' doesn't own any app. I've just fixed your account, so please go to the admin console again. If you're using another account, please let me know. Sorry for the inconvenience, and enjoy! -- Takashi -- Takashi On Wed, Sep 5, 2012 at 3:21 AM, Grant Heaslip gr...@grantheaslip.cawrote: I'm trying to sign up for App Engine, but opening any page on appengine.google.com results in a never-ending string of 302 redirects to https://appengine.google.com/**starthttps://appengine.google.com/start, eventually leading to Chrome spitting out Error 310 (net::ERR_TOO_MANY_REDIRECTS): There were too many redirects. I'm using a Google Apps account, so I've also tried https://appengine.google.com/**a/grantheaslip.cahttps://appengine.google.com/a/grantheaslip.cato no avail. I've tried different browsers, and clearing my cache and cookies. My theory is that the existence of a previous Google Apps account under the same name is causing the problem. I created and deleted a Google Apps account on this domain a few months ago, and recently signed up again. I realize this is a problem better suited to private customer support, but of the various community support options available, posting this here seems like the least inappropriate option -- this would almost certainly be closed on Stock Overflow for being too localized. -- You received this message because you are subscribed to the Google Groups Google App Engine group. To view this discussion on the web visit https://groups.google.com/d/**msg/google-appengine/-/**zTqjd8YYBMQJhttps://groups.google.com/d/msg/google-appengine/-/zTqjd8YYBMQJ . To post to this group, send email to google-a...@googlegroups.com. To unsubscribe from this group, send email to google-appengi...@** googlegroups.com. For more options, visit this group at http://groups.google.com/** group/google-appengine?hl=enhttp://groups.google.com/group/google-appengine?hl=en . -- Takashi Matsuo | Developers Advocate | tma...@google.com -- Takashi Matsuo | Developers Advocate | tma...@google.com -- You received this message because you are subscribed to a topic in the Google Groups Google App Engine group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/google-appengine/eTLJcx86wf0/unsubscribe . To unsubscribe from this group and all its topics, send an email to google-appengi...@googlegroups.com javascript:. To post to this group, send email to google-a...@googlegroups.comjavascript: . Visit this group at http://groups.google.com/group/google-appengine. For more options, visit
[google-appengine] zopfli compression?
Hi there, I recently read about Google's Zopfli https://code.google.com/p/zopfli/ (~5% better compression of asset files). I was wondering how I can combine this with App Engine. I suppose Zopfli is not currently used for compression of App Engine static files, is it? Is it possible to compress files with Zopfli and let App Engine serve the .gz files directly? Regards Stephan -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] how to calculate GMT timestemp to apoch timestemp ?
Give me algorithms how it calculate -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
Re: [google-appengine] Can't integrate GCS to existing AppEngine project
We had a small stumble with Google Cloud Storage too, recently, but not calling from App Engine but from Compute. We tried to make a call to it but it returned that we were over quota on our first call. We could upload files from the web interface, so we were confused. Turns out that the JSON version of the API we were using is v1/experimental, and they start you off at 0 quota! Something to keep in mind if you are using the Cloud Storage from outside of app engine and you turn on that Google Cloud Storage service in the console and then you turn on that Google Cloud Storage JSON API service right below it. Rock on, Hardwick We put in a request for quota and will wait a week (requesting more quota can take up to a week to be reviewed/approved...and make sure you give formulaic reasons behind the numbers you request). If we don't get approved, we'll do the XML approach. On Friday, August 30, 2013 2:27:07 AM UTC-4, Denis Sigov wrote: Vinny, Ultimately, as you adviced, I went to APIs console, selected my project (created by integrating GAE app), and switched to ON Cloud Storage (it was OFF). Now Cloud Storage buckets are creating fine. Answers for your questions: When you tried another project, was that a project created by the New Project button on the Google Cloud Console, or by integrating an App Engine application into the console? By New Project button from Cloud Console. Now, I've tried to enable billing for that project and everything works fine. Can you try this: Go to the cloud console and create a new project. Set up billing on that project. Then go to Cloud Storage and try to set up a bucket. Done. New project with billing enabled works fine. Thanks a lot for your help! Den -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] operating on too many entity groups in a single transaction.
Hello Group, I have googled for this error and as far as I can see, the Appengine Datastore does not support more than 5 Groups in a transaction (at least in a XG Transaction). OK ... but how do I get the the following issue done: *1. I am using OpenSeccionInView Pattern. See my code below:* @Override public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException { //1. Create new EntityManager for this call EntityManager em = factory.createEntityManager(); ThreadLocalEntityManager.set(em);//==(1) Create EM em.getTransaction().begin();//==(2) Begin Transaction try { chain.doFilter(request, response); em.getTransaction().commit();//==(3) Commit Transaction } catch (ConstraintViolationException cve) { //This exception is thrown on Constraint Violation JSR303 if(em.getTransaction().isActive()) { //This is usually never called em.getTransaction().rollback(); } } catch (Exception e) { if(em.getTransaction().isActive()) { em.getTransaction().rollback(); } e.printStackTrace(); } finally { if(em.isOpen()) { em.close();//==(4) Close EM } } } *2. I have Entities called JobCategory that stays in OneToMany relation with itself and OneToMany Relation with Job Entity (JPA is used with DataNucleus) *@Entity public class JobCategory { @OneToMany(mappedBy = mainCategory, cascade = CascadeType.ALL) @OrderBy(i18nKey ASC) private ListJobCategory subCategories = new ArrayListJobCategory(); @ManyToOne private JobCategory mainCategory; @OneToMany(mappedBy = jobCategory) @OrderBy(creationDate DESC) private ListJob jobs = new ArrayListJob(); ... /** * Method will return All JobCategories that are available in the database */ public static ListJobCategory findAllJobCategories() { EntityManager em = ThreadLocalEntityManager.get(); Query query = em.createQuery(SELECT e FROM + JobCategory.class.getSimpleName() + e ORDER BY e.i18nKey); return (ListJobCategory) query.getResultList(); } ... } *My Question:* I woudl like to load all JobCategories (there are more than 10 main JobCategories with 5-6 Subcategories each), but as mentioned the DB does not support more than 5 Groups per transaction. The OSIV-Pattern, as shown in my code above and explained here: https://community.jboss.org/wiki/OpenSessionInView?_sscc=t ... opens one transaction for every DB-call which lets me get max 5 Grouped-Entities!? How do I get *all JobCategories* loaded properly!? I assume that there is something wrong with my OSIV-Pattern since it allows only one transaction per call. But this is exactly what the JBOSS example did!? Thank you in advance for your help!! Nermin -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] GIT push-to-deploy problem.
Hello all, For about 1 hour I'm not able to deploy via git on AppEngine. I have try to : - recreate the token. - recreate a Git repo on appengine. The error message is in the attach file. Any idea ? Thanks in advance, DG -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out. attachment: Screen Shot 2013-08-30 at 16.59.45.png
[google-appengine] Re: Hanging on last Backend (or Module) memcache writes
2 seconds is confirmed as not hanging over 30+ runs. I'll be away for a week, but when I'm back I'm going to try 1 second. -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] How can I change the Data Storage Selection setting?
The Google App Engine terms of service, under paragraph 2.3a, state Customer may select via the Service whether the Core App Engine End User Data will be stored permanently, at rest, in either the United States or the European Union, and Google will store it accordingly (App Engine Data Location Setting). As a GAE/J application administrator, does anyone know where I can find this application setting, so that I can change it as needed? Any help would be appreciated. -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] javax.validation 1.1 and GAE/J
Hi, I recently tried to use hibernate-validation 5.0.1.Final on the AppEngine, but ran in some severe security issues. To be precise - the security issues came because of the el-api provided by org.glassfish.web javax.el version 2.2.4. wants to access some internals blacklisted by GAE. The old version of hibernate-validation 4.3.1.Final works. But it only implements javax.validation 1.0 while 5.0.1.Final implements javax.validation 1.1. Okay. Simple question at the end - did anyone get hibernate-validation 5.0.1.Final to run on the AppEngine successfully? Any hints would be well appreciated. Thanks! -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] Guice 3 on the appengine - possible performance hint
Hi, we recently debugged a performance issue with Guice 3 running on the App Engine. I don't want to go into the details, but it turned out that our app on GAE is faster (both initial startup + warmup requests) when Guice is ran in Stage.PRODUCTION than in Stage.DEVELOPMENT (the default stage when you do not set a stage explicitly). We actually expected that Stage.DEVELOPMENT would be faster because a lot of binding is then done on-demand. But this was wrong - at least for our applications. So - if you are using Guice you can try to start your injector in Stage.PRODUCTION. Please also share any insights you may have on this. Thanks, Raphael The thread were we discussed the issue: https://groups.google.com/forum/#!topic/ninja-framework/IHs5wUQEQsI More on Guice Stages: https://google-guice.googlecode.com/svn/trunk/latest-javadoc/com/google/inject/Stage.html -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
[google-appengine] Cant Login to Google Apps from Eclipse 4.3
Hello, I have Installed Eclipse 4.3 and the Google Plugin for Eclipse 4.3. When I try to deploy an App, or click the login to Google at the lower right, I get the Login Screen. After login I am taken to a screen Google Plugin for Eclipse, This App would like to (several items listed) my choices are Cancel or Accept, Clicking Accept just keeps bring me back to the same screen. I can login to Google Apps from the google site ans see all of my previously deployed Apps and Versions. Lost! Thanks, Raney -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
Re: [google-appengine] Testing Modules with development server: modules and dispatcher not started
In the java appengine version they haven't implemented the dispatch.xml configuration to work on dev servers. That means myself having to test a rather complex app directly production and adding hundreds of bugs per second. I have been informed that the maximum we can do at this point is to star this issue: https://code.google.com/p/googleappengine/issues/detail?id=9911 For java i've hacked a simple proof of concept that emulates that feature, but it's not even close to how we should be developing. It's annoying to debug on java now. https://gist.github.com/mufumbo/6325670 thanks rafa On Thu, Aug 29, 2013 at 5:22 PM, Oliv oliv...@gmail.com wrote: Hello, I'd like to make some tests with the new appengine modules feature but I'm having some problems to make them work on my dev machine. I found this https://github.com/GoogleCloudPlatform/appengine-modules-helloworld-pythonto give it a try but still no luck. When the app starts I don't see any of the module loaded, only the default one. Looking at the doc https://developers.google.com/appengine/docs/python/modules/routing#Python_Routing_in_the_development_serveri should see 3 servers started on different ports (1 for each module) but only the default one is loaded. I also don't see that the dispatcher started. Fetching the default page works but I get 404 for /mobile and /work. The dispatch.yaml file uses rules with relative path patterns. Here are my logs: INFO 2013-08-30 00:14:20,702 sdk_update_checker.py:245] Checking for updates to the SDK. INFO 2013-08-30 00:14:21,067 sdk_update_checker.py:273] The SDK is up to date. INFO 2013-08-30 00:14:21,252 api_server.py:138] Starting API server at: http://localhost:58478 INFO 2013-08-30 00:14:21,255 dispatcher.py:164] Starting module default running at: http://localhost:8080 INFO 2013-08-30 00:14:21,259 admin_server.py:117] Starting admin server at: http://localhost:8000 INFO 2013-08-30 00:14:58,871 module.py:593] default: GET / HTTP/1.1 200 36 INFO 2013-08-30 00:15:12,914 module.py:593] default: GET /mobile/ HTTP/1.1 404 154 Here is my OSX SDK version: 1.8.3.1042 Let me know if you have any idea, Thanks, - Oliv -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
Re: [google-appengine] Migrating to Python 2.7
Thanks for the info! would you mind taking a look at the revised yaml file I made? I tried to deploy it but am still getting Process exited with code 1 error. attached is the file for your reference. On Fri, Aug 30, 2013 at 9:30 AM, Vinny P vinny...@gmail.com wrote: OK, I think I have it. Add a space between *threadsafe:* and *true* so it looks like this: *threadsafe: true *(space is after the colon : ) * * I tested your app.yaml file on a PHP application I had, and it worked when I added a space (and edited the script names, of course!). Just to explain what happened, here is a picture of your app.yaml that I annotated: http://imgur.com/Y79j1XX There are extra blank lines, so the 10th and 11th lines are actually the 6th line of text. For future reference, see this page of the YAML spec: http://www.yaml.org/spec/1.2/spec.html#id2759963 TLDR: Keys and values must be separated by a colon and space (i.e. *Key: Value*) - -Vinny P Technology Media Advisor Chicago, IL App Engine Code Samples: http://www.learntogoogleit.com On Thu, Aug 29, 2013 at 7:51 PM, Kim Jae butteric...@gmail.com wrote: Hello! thank you for your response. I don't think spacing is the problem because I was able to successfully deploy the previous yaml file. I just added a few words and changed some. attached is the original notepad for your reference. -- You received this message because you are subscribed to a topic in the Google Groups Google App Engine group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/google-appengine/MAwh5SBAuyU/unsubscribe . To unsubscribe from this group and all its topics, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out. app.yaml Description: Binary data
Re: [google-appengine] Migrating to Python 2.7
On Fri, Aug 30, 2013 at 10:10 PM, Kim Jae butteric...@gmail.com wrote: Thanks for the info! would you mind taking a look at the revised yaml file I made? I tried to deploy it but am still getting Process exited with code 1 error. attached is the file for your reference. Great, I see you removed all the blank lines. It looks much neater now! Also, did the error message change? Does it cite a different line number where it encountered the error? If not, try this: remove all the handler statements except for the root handler (url: /), and try re-uploading the application. If it succeeds, then add in another handler statement, then re-upload. Rinse and repeat until you hit the handler that's causing the error. - -Vinny P Technology Media Advisor Chicago, IL App Engine Code Samples: http://www.learntogoogleit.com -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.
Re: [google-appengine] GIT push-to-deploy problem.
On Fri, Aug 30, 2013 at 10:10 AM, Didier Girard didier.gir...@gmail.com wrote: For about 1 hour I'm not able to deploy via git on AppEngine. I have try to : - recreate the token. - recreate a Git repo on appengine. The error message is in the attach file. Can you try disabling git, uploading a new version using appcfg, re-enabling push to deploy and then attempt to push a new version through git? - -Vinny P Technology Media Advisor Chicago, IL App Engine Code Samples: http://www.learntogoogleit.com -- You received this message because you are subscribed to the Google Groups Google App Engine group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. For more options, visit https://groups.google.com/groups/opt_out.