Re: [gt-user] globus-url-copy hangs

[Joseph Bester]

This part of the admin guide has information about how to set up the various GT 
components to work with a firewall port range:

http://toolkit.globus.org/toolkit/docs/6.0/admin/install/#gt-admin-firewall


Joe

> On Mar 14, 2016, at 3:47 PM, Irena Johnson  wrote:
> 
> It seems that our collaborator is not able to run globus-job-submit (or 
> globus-job-run) successfully, the command just hangs.
> 
> When I run "globus-job-run transpgrid.pppl.gov /bin/date" from my desktop, I 
> get the output after some delay. However, on the server the job doesn't seem 
> to complete (see below).
> 
> 40491 7362 1  0 14:55 ?00:00:00 globus-job-manager -conf 
> /etc/globus/globus-gram-job-manager.conf -type fork -seg-module fork
> 
> 
> So my question is why globus-job-submit or globus-job-run hang? Are there any 
> ports that need to be opened so that someone from outside our network would 
> be able to submit "globus-job-run" or "globus-job-submit" successfully? 
> 
> /var/log/globus/gram_*.log
> 
> ts=2016-03-14T17:47:16.183966Z id=30243 event=gram.job.end level=ERROR 
> gramid=/16505988311912234441/18179527716261904531/ job_status=4 status=-73 
> reason="the job manager failed to open stdout"
> ts=2016-03-14T17:48:14.051020Z id=30243 event=gram.script_idle.info 
> level=DEBUG msg="closing idle script handle after 58.0 seconds
>  ts=2016-03-14T17:48:16.184372Z id=30243 event=gram.end level=DEBUG 
> 
> ts=2016-03-14T18:55:45.516392Z id=6403 event=gram.script_read.start 
> level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0 
> nbytes=56 
> ts=2016-03-14T18:55:45.516545Z id=6403 event=gram.script.log level=DEBUG 
> msg="filestageout staging failed with " 
> ts=2016-03-14T18:55:45.516662Z id=6403 event=gram.script_read.start 
> level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0 
> nbytes=295 
> ts=2016-03-14T18:55:45.516969Z id=6403 event=gram.script_read.start 
> level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0 
> nbytes=22 
> ts=2016-03-14T18:55:45.517039Z id=6403 event=gram.job.info level=DEBUG 
> gramid=/16505999305245686836/18179527716261915071/ job_status=4 
> ts=2016-03-14T18:55:45.517120Z id=6403 event=gram.script_read.start 
> level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0 
> nbytes=1 
> ts=2016-03-14T18:55:45.517206Z id=6403 event=gram.job.info level=DEBUG 
> gramid=/16505999305245686836/18179527716261915071/ job_status=4 
> ts=2016-03-14T18:55:45.517261Z id=6403 event=gram.callback.start level=DEBUG 
> gramid=/16505999305245686836/18179527716261915071/ state=4 
> restart_when_done=false 
> ts=2016-03-14T18:55:45.518783Z id=6403 event=gram.callback.end level=DEBUG 
> gramid=/16505999305245686836/18179527716261915071/ state=4 status=0 msg="Done 
> queuing callback messages"
> ts=2016-03-14T18:55:45.699160Z id=6403 event=gram.directory_destroy.end 
> level=DEBUG gramid=/16505999305245686836/18179527716261915071/ 
> path="/u/tr_nhoward/.globus/tr_nhoward/.globus/job/transpgrid2/16505999305245686836.18179527716261915071"
>  failures=0 status=0 
> ts=2016-03-14T18:55:45.743314Z id=6403 event=gram.job.end level=ERROR 
> gramid=/16505999305245686836/18179527716261915071/ job_status=4 status=-73 
> reason="the job manager failed to open stdout"
> ts=2016-03-14T18:55:52.105262Z id=6403 event=gram.add_reference_by_jobid.end 
> level=DEBUG jobid="5ed6bf0a-ea16-11e5-91d3-288023a84afc:7395" status=-156 
> msg="Unknown job ID" reason="the job contact string does not match any which 
> the job manager is handling" 
> ts=2016-03-14T18:55:52.105382Z id=6403 event=gram.add_reference_by_jobid.end 
> level=DEBUG jobid="5ed6bf0a-ea16-11e5-91d3-288023a84afc:7395" status=-156 
> msg="Unknown job ID" reason="the job contact string does not match any which 
> the job manager is handling" 
> 
> 
> Thank you!
> Irena
> 
> On Mon, Mar 14, 2016 at 2:58 PM, Irena Johnson  wrote:
> Raj,
> 
> This time globus-url-copy worked (see output below). However, they are now 
> not able to run "globus-job-run transpgrid.pppl.gov /bin/date". Command just 
> hangs.
> 
> 
> 227 Entering Passive Mode (192,55,106,199,195,88)
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incoming/281948_CMOD.REQUEST
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 150 Beginning transfer.
> 
> debug: writing buffer 0x7ffaba8c0010, length 348, offset=0, eof=true
> debug: data callback, no error, buffer 0x7ffaba8c0010, length 348,
> offset=0, eof=true
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 226 Transfer Complete.
> 
> debug: operation complete
> 
> 
> On Mon, Mar 14, 2016 at 2:27 PM, Raj Kettimuthu  wrote:
> Fr

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

It seems that our collaborator is not able to run globus-job-submit (or
globus-job-run) successfully, the command just hangs.

When I run "globus-job-run transpgrid.pppl.gov /bin/date" from my desktop,
I get the output after some delay. However, on the server the job doesn't
seem to complete (see below).

40491 7362 1  0 14:55 ?00:00:00 globus-job-manager -conf
/etc/globus/globus-gram-job-manager.conf -type fork -seg-module fork


So my question is why globus-job-submit or globus-job-run hang? Are there
any ports that need to be opened so that someone from outside our network
would be able to submit "globus-job-run" or "globus-job-submit"
successfully?

/var/log/globus/gram_*.log

ts=2016-03-14T17:47:16.183966Z id=30243 event=gram.job.end level=ERROR
gramid=/16505988311912234441/18179527716261904531/ job_status=4 status=-73
reason="the job manager failed to open stdout"
ts=2016-03-14T17:48:14.051020Z id=30243 event=gram.script_idle.info
level=DEBUG msg="closing idle script handle after 58.0 seconds
 ts=2016-03-14T17:48:16.184372Z id=30243 event=gram.end level=DEBUG

ts=2016-03-14T18:55:45.516392Z id=6403 event=gram.script_read.start
level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0
nbytes=56
ts=2016-03-14T18:55:45.516545Z id=6403 event=gram.script.log level=DEBUG
msg="filestageout staging failed with "
ts=2016-03-14T18:55:45.516662Z id=6403 event=gram.script_read.start
level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0
nbytes=295
ts=2016-03-14T18:55:45.516969Z id=6403 event=gram.script_read.start
level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0
nbytes=22
ts=2016-03-14T18:55:45.517039Z id=6403 event=gram.job.info level=DEBUG
gramid=/16505999305245686836/18179527716261915071/ job_status=4
ts=2016-03-14T18:55:45.517120Z id=6403 event=gram.script_read.start
level=DEBUG gramid=/16505999305245686836/18179527716261915071/ result=0
nbytes=1
ts=2016-03-14T18:55:45.517206Z id=6403 event=gram.job.info level=DEBUG
gramid=/16505999305245686836/18179527716261915071/ job_status=4
ts=2016-03-14T18:55:45.517261Z id=6403 event=gram.callback.start
level=DEBUG gramid=/16505999305245686836/18179527716261915071/ state=4
restart_when_done=false
ts=2016-03-14T18:55:45.518783Z id=6403 event=gram.callback.end level=DEBUG
gramid=/16505999305245686836/18179527716261915071/ state=4 status=0
msg="Done queuing callback messages"
ts=2016-03-14T18:55:45.699160Z id=6403 event=gram.directory_destroy.end
level=DEBUG gramid=/16505999305245686836/18179527716261915071/
path="/u/tr_nhoward/.globus/tr_nhoward/.globus/job/transpgrid2/16505999305245686836.18179527716261915071"
failures=0 status=0
ts=2016-03-14T18:55:45.743314Z id=6403 event=gram.job.end level=ERROR
gramid=/16505999305245686836/18179527716261915071/ job_status=4 status=-73
reason="the job manager failed to open stdout"
ts=2016-03-14T18:55:52.105262Z id=6403
event=gram.add_reference_by_jobid.end level=DEBUG
jobid="5ed6bf0a-ea16-11e5-91d3-288023a84afc:7395" status=-156 msg="Unknown
job ID" reason="the job contact string does not match any which the job
manager is handling"
ts=2016-03-14T18:55:52.105382Z id=6403
event=gram.add_reference_by_jobid.end level=DEBUG
jobid="5ed6bf0a-ea16-11e5-91d3-288023a84afc:7395" status=-156 msg="Unknown
job ID" reason="the job contact string does not match any which the job
manager is handling"


Thank you!
Irena

On Mon, Mar 14, 2016 at 2:58 PM, Irena Johnson  wrote:

> Raj,
>
> This time globus-url-copy worked (see output below). However, they are now
> not able to run "globus-job-run transpgrid.pppl.gov /bin/date". Command
> just hangs.
>
>
> 227 Entering Passive Mode (192,55,106,199,195,88)
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incoming/281948_CMOD.REQUEST
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 150 Beginning transfer.
>
> debug: writing buffer 0x7ffaba8c0010, length 348, offset=0, eof=true
> debug: data callback, no error, buffer 0x7ffaba8c0010, length 348,
> offset=0, eof=true
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 226 Transfer Complete.
>
> debug: operation complete
>
>
> On Mon, Mar 14, 2016 at 2:27 PM, Raj Kettimuthu  wrote:
>
>> From the 227 response to PASV command below, the server is listening on
>> port 38198 (149*256 + 54) for the data channel connection. It means that
>> GLOBUS_TCP_PORT_RANGE is not set as intended. Try adding ‘port_range
>> 5,50099’ in gridftp.conf
>>
>> On Mar 14, 2016, at 1:21 PM, Irena Johnson  wrote:
>>
>> Here is the output.
>>
>>
>> 227 Entering Passive Mode (192,55,106,199,149,54)
>>
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incom

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

Raj,

This time globus-url-copy worked (see output below). However, they are now
not able to run "globus-job-run transpgrid.pppl.gov /bin/date". Command
just hangs.


227 Entering Passive Mode (192,55,106,199,195,88)

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
ALLO 348

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
200 ALLO command successful.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
STOR ~/incoming/281948_CMOD.REQUEST

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
150 Beginning transfer.

debug: writing buffer 0x7ffaba8c0010, length 348, offset=0, eof=true
debug: data callback, no error, buffer 0x7ffaba8c0010, length 348,
offset=0, eof=true
debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
226 Transfer Complete.

debug: operation complete


On Mon, Mar 14, 2016 at 2:27 PM, Raj Kettimuthu  wrote:

> From the 227 response to PASV command below, the server is listening on
> port 38198 (149*256 + 54) for the data channel connection. It means that
> GLOBUS_TCP_PORT_RANGE is not set as intended. Try adding ‘port_range
> 5,50099’ in gridftp.conf
>
> On Mar 14, 2016, at 1:21 PM, Irena Johnson  wrote:
>
> Here is the output.
>
>
> 227 Entering Passive Mode (192,55,106,199,149,54)
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incoming/281948_CMOD.REQUEST
>
>
> I am thinking something is not configured correctly on my server. I have
> xinetd running (with /etc/xinetd.d/gridftp, which should run gsiftp) as
> well as globus-gridftp-server.
> If I stop the service globus-gridftp-server, I am getting this error:
> "error: globus_xio: Unable to connect to transpgrid.pppl.gov:2811", and
> nothing is listening on port 2811.
>
>
> If I start the service globus-gridftp-server, at least I can see that the
> server is listening on the port:
>
> #  netstat -tupln |grep 2811
> tcp0  0 :::2811 :::*
>  LISTEN  1975/globus-gridftp
>
>
> On Mon, Mar 14, 2016 at 2:04 PM, Raj Kettimuthu  wrote:
>
>> Can you send the output of globus-url-copy -dbg now? Are you sure the
>> ports 5-50099 are open?
>>
>> On Mar 14, 2016, at 1:00 PM, Irena Johnson  wrote:
>>
>> Hello Raj,
>>
>> Our collaborator is still not able to use globus-url-copy (command still
>> hangs).
>>
>> Do I need to set GLOBUS_TCP_PORT_RANGE in /etc/gridftp.conf (the range is
>> set in /etc/xinetd.d/gridftp) ?
>>
>>
>> # more /etc/gridftp.conf
>> # globus-gridftp-server configuration file
>>
>> # this is a comment
>>
>> # option names beginning with '$' will be set as environment variables,
>> e.g.
>> # $GLOBUS_ERROR_VERBOSE 1
>> # $GLOBUS_TCP_PORT_RANGE 5,51000
>>
>> # port
>> port 2811
>> log_level ERROR,WARN,INFO
>> log_single /var/log/gridftp-auth.log
>> log_transfer /var/log/gridftp.log
>>
>>
>> Thanks,
>> Irena
>>
>>
>> On Mon, Mar 14, 2016 at 12:44 PM, Irena Johnson 
>> wrote:
>>
>>> I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in
>>>  /etc/xinetd.d/gridftp
>>>
>>> # cat  /etc/xinetd.d/gridftp
>>> service gsiftp
>>> {
>>> instances   = 100
>>> socket_type = stream
>>> wait= no
>>> user= root
>>> *env = GLOBUS_TCP_PORT_RANGE=5,50099*
>>> server  = /usr/sbin/globus-gridftp-server
>>> server_args = -i
>>> log_on_success  += DURATION
>>> nice= 10
>>> disable = yes
>>> }
>>>
>>> I restarted globus-gridftp-server -- and will try again.
>>>
>>>
>>> My hosts file is below:
>>> # cat /etc/hosts
>>> 127.0.0.1   localhost
>>>
>>>
>>> Thank you!
>>>
>>> On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz <
>>> j...@super.unam.mx> wrote:
>>>
 Hi all,

 I recently got into a similar problem. It’s a hostname resolution
 issue.
 see the thread for
 https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html

 saludos,

 José Luis Gordillo Ruiz
 Coordinación de Supercómputo
 DGTIC - UNAM



 El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu 
 escribió:

 Looks like a firewall issue to me. Do you have a set of ports open on
 the server for data channel connections? If you have done that already, you
 have to set that port range either in the server command line using
 ‘-port-range startport,endport’ or set set the environment variable
 GLOBUS_TCP_PORT_RANGE (GLOBUS_TCP_PORT_RANGE=startport,endport).

 On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:

 Dear Globus User Support,
>

Re: [gt-user] globus-url-copy hangs

[Raj Kettimuthu]

From the 227 response to PASV command below, the server is listening on port 
38198 (149*256 + 54) for the data channel connection. It means that 
GLOBUS_TCP_PORT_RANGE is not set as intended. Try adding ‘port_range 
5,50099’ in gridftp.conf

On Mar 14, 2016, at 1:21 PM, Irena Johnson  wrote:

> Here is the output.
> 
> 
> 227 Entering Passive Mode (192,55,106,199,149,54)
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incoming/281948_CMOD.REQUEST
> 
> 
> I am thinking something is not configured correctly on my server. I have 
> xinetd running (with /etc/xinetd.d/gridftp, which should run gsiftp) as well 
> as globus-gridftp-server.
> If I stop the service globus-gridftp-server, I am getting this error: "error: 
> globus_xio: Unable to connect to transpgrid.pppl.gov:2811", and nothing is 
> listening on port 2811.
> 
> 
> If I start the service globus-gridftp-server, at least I can see that the 
> server is listening on the port:
> 
> #  netstat -tupln |grep 2811
> tcp0  0 :::2811 :::*
> LISTEN  1975/globus-gridftp 
> 
> 
> On Mon, Mar 14, 2016 at 2:04 PM, Raj Kettimuthu  wrote:
> Can you send the output of globus-url-copy -dbg now? Are you sure the ports 
> 5-50099 are open? 
> 
> On Mar 14, 2016, at 1:00 PM, Irena Johnson  wrote:
> 
>> Hello Raj,
>> 
>> Our collaborator is still not able to use globus-url-copy (command still 
>> hangs).
>> 
>> Do I need to set GLOBUS_TCP_PORT_RANGE in /etc/gridftp.conf (the range is 
>> set in /etc/xinetd.d/gridftp) ?
>> 
>> 
>> # more /etc/gridftp.conf
>> # globus-gridftp-server configuration file
>> 
>> # this is a comment
>> 
>> # option names beginning with '$' will be set as environment variables, e.g.
>> # $GLOBUS_ERROR_VERBOSE 1
>> # $GLOBUS_TCP_PORT_RANGE 5,51000
>> 
>> # port
>> port 2811
>> log_level ERROR,WARN,INFO
>> log_single /var/log/gridftp-auth.log
>> log_transfer /var/log/gridftp.log
>> 
>> 
>> Thanks,
>> Irena
>> 
>> 
>> On Mon, Mar 14, 2016 at 12:44 PM, Irena Johnson  wrote:
>> I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in  
>> /etc/xinetd.d/gridftp
>> 
>> # cat  /etc/xinetd.d/gridftp
>> service gsiftp
>> {
>> instances   = 100
>> socket_type = stream
>> wait= no
>> user= root
>> env = GLOBUS_TCP_PORT_RANGE=5,50099
>> server  = /usr/sbin/globus-gridftp-server
>> server_args = -i
>> log_on_success  += DURATION
>> nice= 10
>> disable = yes
>> }
>> 
>> I restarted globus-gridftp-server -- and will try again.
>> 
>> 
>> My hosts file is below:
>> # cat /etc/hosts
>> 127.0.0.1   localhost
>> 
>> 
>> Thank you!
>> 
>> On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz 
>>  wrote:
>> Hi all,
>> 
>> I recently got into a similar problem. It’s a hostname resolution issue. 
>> see the thread for 
>> https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html
>> 
>> saludos,
>> 
>> José Luis Gordillo Ruiz
>> Coordinación de Supercómputo
>> DGTIC - UNAM
>> 
>> 
>> 
>>> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu  escribió:
>>> 
>>> Looks like a firewall issue to me. Do you have a set of ports open on the 
>>> server for data channel connections? If you have done that already, you 
>>> have to set that port range either in the server command line using 
>>> ‘-port-range startport,endport’ or set set the environment variable 
>>> GLOBUS_TCP_PORT_RANGE (GLOBUS_TCP_PORT_RANGE=startport,endport).
>>> 
>>> On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:
>>> 
 Dear Globus User Support,
 
 Our collaborator is having problem copying a file via command 
 "globus-url-copy".
 Please see below.
 
 
 
 
 It hangs up after this:
 
 [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
 file:///home/nthoward/281948_CMOD.REQUEST
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
 Source: file:///home/nthoward/
 Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
   281948_CMOD.REQUEST
 debug: starting to put
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
 debug: connecting to
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
 debug: response from
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
 [Globus Toolkit 6.0] ready.
 
 debug: authenticating with
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
 debug: response from
 gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
 23

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

Here is the output.


227 Entering Passive Mode (192,55,106,199,149,54)

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
ALLO 348

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
200 ALLO command successful.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
STOR ~/incoming/281948_CMOD.REQUEST


I am thinking something is not configured correctly on my server. I have
xinetd running (with /etc/xinetd.d/gridftp, which should run gsiftp) as
well as globus-gridftp-server.
If I stop the service globus-gridftp-server, I am getting this error:
"error: globus_xio: Unable to connect to transpgrid.pppl.gov:2811", and
nothing is listening on port 2811.


If I start the service globus-gridftp-server, at least I can see that the
server is listening on the port:

#  netstat -tupln |grep 2811
tcp0  0 :::2811 :::*
 LISTEN  1975/globus-gridftp


On Mon, Mar 14, 2016 at 2:04 PM, Raj Kettimuthu  wrote:

> Can you send the output of globus-url-copy -dbg now? Are you sure the
> ports 5-50099 are open?
>
> On Mar 14, 2016, at 1:00 PM, Irena Johnson  wrote:
>
> Hello Raj,
>
> Our collaborator is still not able to use globus-url-copy (command still
> hangs).
>
> Do I need to set GLOBUS_TCP_PORT_RANGE in /etc/gridftp.conf (the range is
> set in /etc/xinetd.d/gridftp) ?
>
>
> # more /etc/gridftp.conf
> # globus-gridftp-server configuration file
>
> # this is a comment
>
> # option names beginning with '$' will be set as environment variables,
> e.g.
> # $GLOBUS_ERROR_VERBOSE 1
> # $GLOBUS_TCP_PORT_RANGE 5,51000
>
> # port
> port 2811
> log_level ERROR,WARN,INFO
> log_single /var/log/gridftp-auth.log
> log_transfer /var/log/gridftp.log
>
>
> Thanks,
> Irena
>
>
> On Mon, Mar 14, 2016 at 12:44 PM, Irena Johnson  wrote:
>
>> I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in
>>  /etc/xinetd.d/gridftp
>>
>> # cat  /etc/xinetd.d/gridftp
>> service gsiftp
>> {
>> instances   = 100
>> socket_type = stream
>> wait= no
>> user= root
>> *env = GLOBUS_TCP_PORT_RANGE=5,50099*
>> server  = /usr/sbin/globus-gridftp-server
>> server_args = -i
>> log_on_success  += DURATION
>> nice= 10
>> disable = yes
>> }
>>
>> I restarted globus-gridftp-server -- and will try again.
>>
>>
>> My hosts file is below:
>> # cat /etc/hosts
>> 127.0.0.1   localhost
>>
>>
>> Thank you!
>>
>> On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz <
>> j...@super.unam.mx> wrote:
>>
>>> Hi all,
>>>
>>> I recently got into a similar problem. It’s a hostname resolution issue.
>>> see the thread for
>>> https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html
>>>
>>> saludos,
>>>
>>> José Luis Gordillo Ruiz
>>> Coordinación de Supercómputo
>>> DGTIC - UNAM
>>>
>>>
>>>
>>> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu 
>>> escribió:
>>>
>>> Looks like a firewall issue to me. Do you have a set of ports open on
>>> the server for data channel connections? If you have done that already, you
>>> have to set that port range either in the server command line using
>>> ‘-port-range startport,endport’ or set set the environment variable
>>> GLOBUS_TCP_PORT_RANGE (GLOBUS_TCP_PORT_RANGE=startport,endport).
>>>
>>> On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:
>>>
>>> Dear Globus User Support,
>>>
>>> Our collaborator is having problem copying a file via command
>>> "globus-url-copy".
>>> Please see below.
>>>
>>>
>>>
>>>
>>> It hangs up after this:
>>>
>>> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
>>> file:///home/nthoward/281948_CMOD.REQUEST
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> Source: file:///home/nthoward/
>>> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>>>   281948_CMOD.REQUEST
>>> debug: starting to put
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: connecting to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
>>> [Globus Toolkit 6.0] ready.
>>>
>>> debug: authenticating with
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 230 User tr_nhoward logged in.
>>>
>>> debug: sending command to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> SITE HELP
>>>
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 214-The following commands are recognized:
>>> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
>>> ERETMDTMSTATESTOHELPLISTMODENLST
>>> MLSCMLSDPASVRNFR  

Re: [gt-user] globus-url-copy hangs

[Raj Kettimuthu]

Can you send the output of globus-url-copy -dbg now? Are you sure the ports 
5-50099 are open? 

On Mar 14, 2016, at 1:00 PM, Irena Johnson  wrote:

> Hello Raj,
> 
> Our collaborator is still not able to use globus-url-copy (command still 
> hangs).
> 
> Do I need to set GLOBUS_TCP_PORT_RANGE in /etc/gridftp.conf (the range is set 
> in /etc/xinetd.d/gridftp) ?
> 
> 
> # more /etc/gridftp.conf
> # globus-gridftp-server configuration file
> 
> # this is a comment
> 
> # option names beginning with '$' will be set as environment variables, e.g.
> # $GLOBUS_ERROR_VERBOSE 1
> # $GLOBUS_TCP_PORT_RANGE 5,51000
> 
> # port
> port 2811
> log_level ERROR,WARN,INFO
> log_single /var/log/gridftp-auth.log
> log_transfer /var/log/gridftp.log
> 
> 
> Thanks,
> Irena
> 
> 
> On Mon, Mar 14, 2016 at 12:44 PM, Irena Johnson  wrote:
> I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in  
> /etc/xinetd.d/gridftp
> 
> # cat  /etc/xinetd.d/gridftp
> service gsiftp
> {
> instances   = 100
> socket_type = stream
> wait= no
> user= root
> env = GLOBUS_TCP_PORT_RANGE=5,50099
> server  = /usr/sbin/globus-gridftp-server
> server_args = -i
> log_on_success  += DURATION
> nice= 10
> disable = yes
> }
> 
> I restarted globus-gridftp-server -- and will try again.
> 
> 
> My hosts file is below:
> # cat /etc/hosts
> 127.0.0.1   localhost
> 
> 
> Thank you!
> 
> On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz 
>  wrote:
> Hi all,
> 
> I recently got into a similar problem. It’s a hostname resolution issue. 
> see the thread for 
> https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html
> 
> saludos,
> 
> José Luis Gordillo Ruiz
> Coordinación de Supercómputo
> DGTIC - UNAM
> 
> 
> 
>> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu  escribió:
>> 
>> Looks like a firewall issue to me. Do you have a set of ports open on the 
>> server for data channel connections? If you have done that already, you have 
>> to set that port range either in the server command line using ‘-port-range 
>> startport,endport’ or set set the environment variable GLOBUS_TCP_PORT_RANGE 
>> (GLOBUS_TCP_PORT_RANGE=startport,endport).
>> 
>> On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:
>> 
>>> Dear Globus User Support,
>>> 
>>> Our collaborator is having problem copying a file via command 
>>> "globus-url-copy".
>>> Please see below.
>>> 
>>> 
>>> 
>>> 
>>> It hangs up after this:
>>> 
>>> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
>>> file:///home/nthoward/281948_CMOD.REQUEST
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> Source: file:///home/nthoward/
>>> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>>>   281948_CMOD.REQUEST
>>> debug: starting to put
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: connecting to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
>>> [Globus Toolkit 6.0] ready.
>>> 
>>> debug: authenticating with
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 230 User tr_nhoward logged in.
>>> 
>>> debug: sending command to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> SITE HELP
>>> 
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 214-The following commands are recognized:
>>> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
>>> ERETMDTMSTATESTOHELPLISTMODENLST
>>> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
>>> STORPASSPBSZPORTPROTSITEEPRTRETR
>>> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
>>> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
>>> RMD DELECKSMDCSC
>>> 214 End
>>> 
>>> debug: sending command to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> FEAT
>>> 
>>> debug: response from
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> 211-Extensions supported
>>>  HTTP
>>>  DCSC P,D
>>>  MFMT
>>>  AUTHZ_ASSERT
>>>  MLSR
>>>  MLSC
>>>  UTF8
>>>  LANG EN
>>>  DCAU
>>>  PARALLEL
>>>  SIZE
>>>  MLST
>>> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>>>  ERET
>>>  ESTO
>>>  SPAS
>>>  SPOR
>>>  REST STREAM
>>>  MDTM
>>>  PASV AllowDelayed;
>>> 211 End.
>>> 
>>> debug: sending command to
>>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>>> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
>>> (gcc64, 1448068506-85) [unknown]";
>>> debug

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

Hello Raj,

Our collaborator is still not able to use globus-url-copy (command still
hangs).

Do I need to set GLOBUS_TCP_PORT_RANGE in /etc/gridftp.conf (the range is
set in /etc/xinetd.d/gridftp) ?


# more /etc/gridftp.conf
# globus-gridftp-server configuration file

# this is a comment

# option names beginning with '$' will be set as environment variables, e.g.
# $GLOBUS_ERROR_VERBOSE 1
# $GLOBUS_TCP_PORT_RANGE 5,51000

# port
port 2811
log_level ERROR,WARN,INFO
log_single /var/log/gridftp-auth.log
log_transfer /var/log/gridftp.log


Thanks,
Irena


On Mon, Mar 14, 2016 at 12:44 PM, Irena Johnson  wrote:

> I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in
>  /etc/xinetd.d/gridftp
>
> # cat  /etc/xinetd.d/gridftp
> service gsiftp
> {
> instances   = 100
> socket_type = stream
> wait= no
> user= root
> *env = GLOBUS_TCP_PORT_RANGE=5,50099*
> server  = /usr/sbin/globus-gridftp-server
> server_args = -i
> log_on_success  += DURATION
> nice= 10
> disable = yes
> }
>
> I restarted globus-gridftp-server -- and will try again.
>
>
> My hosts file is below:
> # cat /etc/hosts
> 127.0.0.1   localhost
>
>
> Thank you!
>
> On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz <
> j...@super.unam.mx> wrote:
>
>> Hi all,
>>
>> I recently got into a similar problem. It’s a hostname resolution issue.
>> see the thread for
>> https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html
>>
>> saludos,
>>
>> José Luis Gordillo Ruiz
>> Coordinación de Supercómputo
>> DGTIC - UNAM
>>
>>
>>
>> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu 
>> escribió:
>>
>> Looks like a firewall issue to me. Do you have a set of ports open on the
>> server for data channel connections? If you have done that already, you
>> have to set that port range either in the server command line using
>> ‘-port-range startport,endport’ or set set the environment variable
>> GLOBUS_TCP_PORT_RANGE (GLOBUS_TCP_PORT_RANGE=startport,endport).
>>
>> On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:
>>
>> Dear Globus User Support,
>>
>> Our collaborator is having problem copying a file via command
>> "globus-url-copy".
>> Please see below.
>>
>>
>>
>>
>> It hangs up after this:
>>
>> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
>> file:///home/nthoward/281948_CMOD.REQUEST
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>> Source: file:///home/nthoward/
>> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>>   281948_CMOD.REQUEST
>> debug: starting to put
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>> debug: connecting to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
>> [Globus Toolkit 6.0] ready.
>>
>> debug: authenticating with
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 230 User tr_nhoward logged in.
>>
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> SITE HELP
>>
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 214-The following commands are recognized:
>> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
>> ERETMDTMSTATESTOHELPLISTMODENLST
>> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
>> STORPASSPBSZPORTPROTSITEEPRTRETR
>> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
>> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
>> RMD DELECKSMDCSC
>> 214 End
>>
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> FEAT
>>
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 211-Extensions supported
>>  HTTP
>>  DCSC P,D
>>  MFMT
>>  AUTHZ_ASSERT
>>  MLSR
>>  MLSC
>>  UTF8
>>  LANG EN
>>  DCAU
>>  PARALLEL
>>  SIZE
>>  MLST
>>
>> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>>  ERET
>>  ESTO
>>  SPAS
>>  SPOR
>>  REST STREAM
>>  MDTM
>>  PASV AllowDelayed;
>> 211 End.
>>
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
>> (gcc64, 1448068506-85) [unknown]";
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 250 OK.
>>
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> TYPE I
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
>> 

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

I was missing the line "env  = GLOBUS_TCP_PORT_RANGE=5,50099" in
 /etc/xinetd.d/gridftp

# cat  /etc/xinetd.d/gridftp
service gsiftp
{
instances   = 100
socket_type = stream
wait= no
user= root
*env = GLOBUS_TCP_PORT_RANGE=5,50099*
server  = /usr/sbin/globus-gridftp-server
server_args = -i
log_on_success  += DURATION
nice= 10
disable = yes
}

I restarted globus-gridftp-server -- and will try again.


My hosts file is below:
# cat /etc/hosts
127.0.0.1   localhost


Thank you!

On Mon, Mar 14, 2016 at 12:41 PM, José Luis Gordillo Ruiz <
j...@super.unam.mx> wrote:

> Hi all,
>
> I recently got into a similar problem. It’s a hostname resolution issue.
> see the thread for
> https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html
>
> saludos,
>
> José Luis Gordillo Ruiz
> Coordinación de Supercómputo
> DGTIC - UNAM
>
>
>
> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu 
> escribió:
>
> Looks like a firewall issue to me. Do you have a set of ports open on the
> server for data channel connections? If you have done that already, you
> have to set that port range either in the server command line using
> ‘-port-range startport,endport’ or set set the environment variable
> GLOBUS_TCP_PORT_RANGE (GLOBUS_TCP_PORT_RANGE=startport,endport).
>
> On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:
>
> Dear Globus User Support,
>
> Our collaborator is having problem copying a file via command
> "globus-url-copy".
> Please see below.
>
>
>
>
> It hangs up after this:
>
> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
> file:///home/nthoward/281948_CMOD.REQUEST
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> Source: file:///home/nthoward/
> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>   281948_CMOD.REQUEST
> debug: starting to put
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: connecting to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
> [Globus Toolkit 6.0] ready.
>
> debug: authenticating with
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 230 User tr_nhoward logged in.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE HELP
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 214-The following commands are recognized:
> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
> ERETMDTMSTATESTOHELPLISTMODENLST
> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
> STORPASSPBSZPORTPROTSITEEPRTRETR
> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
> RMD DELECKSMDCSC
> 214 End
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> FEAT
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 211-Extensions supported
>  HTTP
>  DCSC P,D
>  MFMT
>  AUTHZ_ASSERT
>  MLSR
>  MLSC
>  UTF8
>  LANG EN
>  DCAU
>  PARALLEL
>  SIZE
>  MLST
>
> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>  ERET
>  ESTO
>  SPAS
>  SPOR
>  REST STREAM
>  MDTM
>  PASV AllowDelayed;
> 211 End.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
> (gcc64, 1448068506-85) [unknown]";
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 250 OK.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> TYPE I
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 Type set to I.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> DCAU N
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 DCAU N.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> PASV
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 227 Entering Passive Mode (192,55,106,199,164,70)
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incom

Re: [gt-user] globus-url-copy hangs

[José Luis Gordillo Ruiz]

Hi all,

I recently got into a similar problem. It’s a hostname resolution issue. 
see the thread for 
https://lists.globus.org/mailman/htdig/gt-user/2007-May/003429.html 


saludos,

José Luis Gordillo Ruiz
Coordinación de Supercómputo
DGTIC - UNAM



> El 14/03/2016, a las 9:57 a.m., Raj Kettimuthu  escribió:
> 
> Looks like a firewall issue to me. Do you have a set of ports open on the 
> server for data channel connections? If you have done that already, you have 
> to set that port range either in the server command line using ‘-port-range 
> startport,endport’ or set set the environment variable GLOBUS_TCP_PORT_RANGE 
> (GLOBUS_TCP_PORT_RANGE=startport,endport).
> 
> On Mar 14, 2016, at 10:46 AM, Irena Johnson  > wrote:
> 
>> Dear Globus User Support,
>> 
>> Our collaborator is having problem copying a file via command 
>> "globus-url-copy".
>> Please see below.
>> 
>> 
>> 
>> 
>> It hangs up after this:
>> 
>> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
>> file:///home/nthoward/281948_CMOD.REQUEST 
>> 
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> 
>> Source: file:///home/nthoward/ 
>> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/ 
>> 
>>   281948_CMOD.REQUEST
>> debug: starting to put
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> 
>> debug: connecting to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> 
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 220 transpgrid2.pppl.gov  GridFTP Server 7.20 
>> (gcc64, 1420641370-85)
>> [Globus Toolkit 6.0] ready.
>> 
>> debug: authenticating with
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> 
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 230 User tr_nhoward logged in.
>> 
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> SITE HELP
>> 
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 214-The following commands are recognized:
>> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
>> ERETMDTMSTATESTOHELPLISTMODENLST
>> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
>> STORPASSPBSZPORTPROTSITEEPRTRETR
>> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
>> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
>> RMD DELECKSMDCSC
>> 214 End
>> 
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> FEAT
>> 
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 211-Extensions supported
>>  HTTP
>>  DCSC P,D
>>  MFMT
>>  AUTHZ_ASSERT
>>  MLSR
>>  MLSC
>>  UTF8
>>  LANG EN
>>  DCAU
>>  PARALLEL
>>  SIZE
>>  MLST
>> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>>  ERET
>>  ESTO
>>  SPAS
>>  SPOR
>>  REST STREAM
>>  MDTM
>>  PASV AllowDelayed;
>> 211 End.
>> 
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
>> (gcc64, 1448068506-85) [unknown]";
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 250 OK.
>> 
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> TYPE I
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 200 Type set to I.
>> 
>> debug: sending command to
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> DCAU N
>> 
>> debug: response from
>> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST 
>> :
>> 200 DCAU

Re: [gt-user] globus-url-copy hangs

[Raj Kettimuthu]

Looks like a firewall issue to me. Do you have a set of ports open on the 
server for data channel connections? If you have done that already, you have to 
set that port range either in the server command line using ‘-port-range 
startport,endport’ or set set the environment variable GLOBUS_TCP_PORT_RANGE 
(GLOBUS_TCP_PORT_RANGE=startport,endport).

On Mar 14, 2016, at 10:46 AM, Irena Johnson  wrote:

> Dear Globus User Support,
> 
> Our collaborator is having problem copying a file via command 
> "globus-url-copy".
> Please see below.
> 
> 
> 
> 
> It hangs up after this:
> 
> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
> file:///home/nthoward/281948_CMOD.REQUEST
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> Source: file:///home/nthoward/
> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>   281948_CMOD.REQUEST
> debug: starting to put
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: connecting to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
> [Globus Toolkit 6.0] ready.
> 
> debug: authenticating with
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 230 User tr_nhoward logged in.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE HELP
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 214-The following commands are recognized:
> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
> ERETMDTMSTATESTOHELPLISTMODENLST
> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
> STORPASSPBSZPORTPROTSITEEPRTRETR
> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
> RMD DELECKSMDCSC
> 214 End
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> FEAT
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 211-Extensions supported
>  HTTP
>  DCSC P,D
>  MFMT
>  AUTHZ_ASSERT
>  MLSR
>  MLSC
>  UTF8
>  LANG EN
>  DCAU
>  PARALLEL
>  SIZE
>  MLST
> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>  ERET
>  ESTO
>  SPAS
>  SPOR
>  REST STREAM
>  MDTM
>  PASV AllowDelayed;
> 211 End.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
> (gcc64, 1448068506-85) [unknown]";
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 250 OK.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> TYPE I
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 Type set to I.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> DCAU N
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 DCAU N.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> PASV
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 227 Entering Passive Mode (192,55,106,199,164,70)
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> ALLO 348
> 
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 ALLO command successful.
> 
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> STOR ~/incoming/281948_CMOD.REQUEST
> 
> 
> 
> Thank you,
> Irena

Re: [gt-user] globus-url-copy hangs

[Irena Johnson]

On our server, /var/log/gridftp.log

DATE=20160314144203.480694 HOST=transpgrid2.pppl.gov
PROG=globus-gridftp-server NL.EVNT=FTP_INFO START=20160314144030.409769
USER=tr_nhoward FILE=/u/tr_nhoward/incoming/281948_CMOD.REQUEST BUFFER=0
BLOCK=262144 NBYTES=0 VOLUME=/ STREAMS=1 STRIPES=1 DEST=[0.0.0.0] TYPE=STOR
CODE=226
DATE=20160314150343.370775 HOST=transpgrid2.pppl.gov
PROG=globus-gridftp-server NL.EVNT=FTP_INFO START=20160314150207.773565
USER=tr_nhoward FILE=/u/tr_nhoward/incoming/281948_CMOD.REQUEST BUFFER=0
BLOCK=262144 NBYTES=0 VOLUME=/ STREAMS=1 STRIPES=1 DEST=[0.0.0.0] TYPE=STOR
CODE=226


Our server, /var/log/gridftp-auth.log

[29351] Mon Mar 14 10:40:30 2016 :: Configuration read from
/etc/gridftp.conf.
[29351] Mon Mar 14 10:40:30 2016 :: Server started in inetd mode.
[29351] Mon Mar 14 10:40:30 2016 :: New connection from:
cmodws87.psfc.mit.edu:51462
[29351] Mon Mar 14 10:40:30 2016 :: DN /DC=com/DC=DigiCert-Grid/O=Open
Science Grid/OU=People/CN=Nathaniel Thomas Howard 1708 successfully
authorized.
[29351] Mon Mar 14 10:40:30 2016 :: User tr_nhoward successfully authorized.
[29351] Mon Mar 14 10:42:03 2016 :: Requesting abort...
[29351] Mon Mar 14 10:42:03 2016 :: Finished transferring
"/u/tr_nhoward/incoming/281948_CMOD.REQUEST".
[29351] Mon Mar 14 10:42:03 2016 :: Closed connection from
cmodws87.psfc.mit.edu:51462
[2611] Mon Mar 14 10:42:03 2016 :: Child process 29351 ended with rc = 0
[3024] Mon Mar 14 11:02:07 2016 :: Configuration read from
/etc/gridftp.conf.
[3024] Mon Mar 14 11:02:07 2016 :: Server started in inetd mode.
[3024] Mon Mar 14 11:02:07 2016 :: New connection from:
cmodws87.psfc.mit.edu:51486
[3024] Mon Mar 14 11:02:07 2016 :: DN /DC=com/DC=DigiCert-Grid/O=Open
Science Grid/OU=People/CN=Nathaniel Thomas Howard 1708 successfully
authorized.
[3024] Mon Mar 14 11:02:07 2016 :: User tr_nhoward successfully authorized.
[3024] Mon Mar 14 11:03:43 2016 :: Requesting abort...
[3024] Mon Mar 14 11:03:43 2016 :: Finished transferring
"/u/tr_nhoward/incoming/281948_CMOD.REQUEST".
[3024] Mon Mar 14 11:03:43 2016 :: Closed connection from
cmodws87.psfc.mit.edu:51486
[2611] Mon Mar 14 11:03:43 2016 :: Child process 3024 ended with rc = 0


Thanks,
Irena

On Mon, Mar 14, 2016 at 11:46 AM, Irena Johnson  wrote:

> Dear Globus User Support,
>
> Our collaborator is having problem copying a file via command
> "globus-url-copy".
> Please see below.
>
>
>
>
> It hangs up after this:
>
> [nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
> file:///home/nthoward/281948_CMOD.REQUEST
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> Source: file:///home/nthoward/
> Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
>   281948_CMOD.REQUEST
> debug: starting to put
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: connecting to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
> [Globus Toolkit 6.0] ready.
>
> debug: authenticating with
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 230 User tr_nhoward logged in.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE HELP
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 214-The following commands are recognized:
> ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
> ERETMDTMSTATESTOHELPLISTMODENLST
> MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
> STORPASSPBSZPORTPROTSITEEPRTRETR
> SPORMFMTSCKSTREVPWD QUITSBUFSIZE
> SPASSTRUSYSTRNTOTYPEUSERLANGMKD
> RMD DELECKSMDCSC
> 214 End
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> FEAT
>
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 211-Extensions supported
>  HTTP
>  DCSC P,D
>  MFMT
>  AUTHZ_ASSERT
>  MLSR
>  MLSC
>  UTF8
>  LANG EN
>  DCAU
>  PARALLEL
>  SIZE
>  MLST
>
> Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
>  ERET
>  ESTO
>  SPAS
>  SPOR
>  REST STREAM
>  MDTM
>  PASV AllowDelayed;
> 211 End.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
> (gcc64, 1448068506-85) [unknown]";
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 250 OK.
>
> debug: sending command to
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> TYPE I
> debug: response from
> gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
> 200 Type se

[gt-user] globus-url-copy hangs

[Irena Johnson]

Dear Globus User Support,

Our collaborator is having problem copying a file via command
"globus-url-copy".
Please see below.




It hangs up after this:

[nthoward@cmodws87 ~]$ globus-url-copy -v -dbg -nodcau
file:///home/nthoward/281948_CMOD.REQUEST
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
Source: file:///home/nthoward/
Dest:   gsiftp://transpgrid.pppl.gov/~/incoming/
  281948_CMOD.REQUEST
debug: starting to put
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
debug: connecting to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
220 transpgrid2.pppl.gov GridFTP Server 7.20 (gcc64, 1420641370-85)
[Globus Toolkit 6.0] ready.

debug: authenticating with
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST
debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
230 User tr_nhoward logged in.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
SITE HELP

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
214-The following commands are recognized:
ALLOAPPERESTCWD CDUPDCAUEPSVFEAT
ERETMDTMSTATESTOHELPLISTMODENLST
MLSCMLSDPASVRNFRMLSRMLSTNOOPOPTS
STORPASSPBSZPORTPROTSITEEPRTRETR
SPORMFMTSCKSTREVPWD QUITSBUFSIZE
SPASSTRUSYSTRNTOTYPEUSERLANGMKD
RMD DELECKSMDCSC
214 End

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
FEAT

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
211-Extensions supported
 HTTP
 DCSC P,D
 MFMT
 AUTHZ_ASSERT
 MLSR
 MLSC
 UTF8
 LANG EN
 DCAU
 PARALLEL
 SIZE
 MLST
Type*;Size*;Modify*;Perm*;Charset;UNIX.mode*;UNIX.owner*;UNIX.uid*;UNIX.group*;UNIX.gid*;Unique*;UNIX.slink*;X.count;
 ERET
 ESTO
 SPAS
 SPOR
 REST STREAM
 MDTM
 PASV AllowDelayed;
211 End.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
SITE CLIENTINFO scheme=gsiftp;appname="globus-url-copy";appver="9.18
(gcc64, 1448068506-85) [unknown]";
debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
250 OK.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
TYPE I
debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
200 Type set to I.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
DCAU N

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
200 DCAU N.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
PASV

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
227 Entering Passive Mode (192,55,106,199,164,70)

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
ALLO 348

debug: response from
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
200 ALLO command successful.

debug: sending command to
gsiftp://transpgrid.pppl.gov/~/incoming/281948_CMOD.REQUEST:
STOR ~/incoming/281948_CMOD.REQUEST



Thank you,
Irena

Re: [gt-user] is Globus V.5.2 compatible with Globus V.6 ?

[Joseph Bester]

The Globus Toolkit uses OpenSSL for crypto operations, so it depends on which 
version it is built against. I think OpenSSL 0.9.8o is the earliest with  
sha256 support by default. 

Note that older versions of OpenSSL do not support the TLS 1.1 and 1.2 
protocols and the new cipher suites that those imply, so you might have limited 
compatibility with newer deployments if you were to use code from an older 
OpenSSL version.

Joe

> On Mar 14, 2016, at 10:34 AM, Irena Johnson  wrote:
> 
> Dear Globus Support,
> 
> Our server has the latest stable version of Globus - V. 6, installed on a Red 
> Hat 6 server.
> Our clients have Solaris (am not sure what version) and have to upgrade their 
> current version of Globus (V. 3), because they are not able to authenticate 
> with our server.
> 
> Is Globus V. 5.2 compatible with sha256 host certificate and with Globus V. 6 
> ?
> 
> Thank you,
> -- 
> Irena

[gt-user] is Globus V.5.2 compatible with Globus V.6 ?

[Irena Johnson]

Dear Globus Support,

Our server has the latest stable version of Globus - V. 6, installed on a
Red Hat 6 server.
Our clients have Solaris (am not sure what version) and have to upgrade
their current version of Globus (V. 3), because they are not able to
authenticate with our server.

Is Globus V. 5.2 compatible with sha256 host certificate and with Globus V.
6 ?

Thank you,
-- 
Irena