Re: [h-cost] Chalking a line

2010-01-13 Thread Becky Rautine

You could always use that water soluable interfacing. Draw on it like on paper, 
then tack it to the fabric, do your handiwork... and get it wet and the 
paper-like interfacing disappears. Problem solved and in a short amount of 
time. But sometimes the prep work does take more than the actual handiwork for 
the end product. Good luck.

Sincerely,
Rebecca Rautine



> From: aqua...@patriot.net
> Date: Wed, 13 Jan 2010 21:37:21 -0500
> To: h-cost...@indra.com
> Subject: Re: [h-cost] Chalking a line
> 
> 
> On Jan 13, 2010, at 2:25 PM, Alexandria Doyle wrote:
> 
> > I can help but think that running the basting line will take nearly  
> > as long to do as doing the couching.  I know it won't, I just  
> > finished the pearling on the collar and I had the pattern drawn out  
> > of muslin, and basted to the black velvet so I could "feel" where  
> > the pearls were to go...
> >
> > alex
> 
> 
>   Thread tracing does take time, but sometimes it's worth it. I  
> once had tiny pleats to make on a very woodgy fabric (grain shifted  
> easily). The thread tracing took longer than it did to actually  
> stitch the pleats, but was the best way to get everything in the  
> right place.
> 
>   -Carol
> ___
> h-costume mailing list
> h-costume@mail.indra.com
> http://mail.indra.com/mailman/listinfo/h-costume
  
_
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/196390706/direct/01/
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-13 Thread Carol Kocian


On Jan 13, 2010, at 2:25 PM, Alexandria Doyle wrote:

I can help but think that running the basting line will take nearly  
as long to do as doing the couching.  I know it won't, I just  
finished the pearling on the collar and I had the pattern drawn out  
of muslin, and basted to the black velvet so I could "feel" where  
the pearls were to go...


alex



 Thread tracing does take time, but sometimes it's worth it. I  
once had tiny pleats to make on a very woodgy fabric (grain shifted  
easily). The thread tracing took longer than it did to actually  
stitch the pleats, but was the best way to get everything in the  
right place.


 -Carol
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-13 Thread Alexandria Doyle
I can help but think that running the basting line will take nearly as
long to do as doing the couching.  I know it won't, I just finished
the pearling on the collar and I had the pattern drawn out of muslin,
and basted to the black velvet so I could "feel" where the pearls were
to go...

alex

On Tue, Jan 12, 2010 at 5:19 PM, Patricia Dunham  wrote:
> If you're still worried about the chalk line lasting, you could run a
> basting thread along the chalk line...  the couched cord will cover any
> holes from the basting, and if you use a fine needle, the holes won't last
> long anyway... this is actually Gerek's idea, he can't remember where he got
> it, but thinks it might even be a period method??
>
> chimene
>
>> Alexandria Doyle wrote:
>>
>>> My idea to mark the placement of these lines involves a chalk line
>>> snapped against the silk that can then be marked with a disapearing
>>> marker so they last until I get to that section of the 7 inch by 5
>>> yards piece.   I can use a cork board with a grid marked and pins to
>>> get the lines at the proper angle.  What I'm wondering is about
>>> chalking the string.  Would rubbing a piece of chalk against the
>>> string between "snaps" be enough to have enough chalk to transfer?
>>
>> Yes, but there's another way you might like better. Instead of a string, I
>> use a firm (not bendable) ruler with a sharp edge. Metal, wood, or very hard
>> thin plastic work well. (For large projects, I use a wooden yardstick that
>> has nice crisp corners on the long edge.) Rub cheap classroom chalk (white
>> or a color) along the edge. Place the ruler, on its edge, on the fabric
>> where you want the line, and slide it back and forth a couple of times in
>> the direction of the line. The chalk transfers in a nice clean line. I
>> wouldn't even bother using fabric marker -- just carefully roll up the
>> marked fabric, and unroll it as you need it. Before you roll, you might
>> cover it with a thin strip of extra fabric to keep the excess chalk from
>> transferring to the back of your working fabric.
>>
>> --Robin
>> ___
>> h-costume mailing list
>> h-costume@mail.indra.com
>> http://mail.indra.com/mailman/listinfo/h-costume
>
> ___
> h-costume mailing list
> h-costume@mail.indra.com
> http://mail.indra.com/mailman/listinfo/h-costume
>



-- 
So much to do and so little attention span to get it done with…
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-13 Thread albertcat


you could run a basting thread along the chalk line...  the couched cord will 
cover any holes from the basting, and if you use a fine needle, the holes won't 
last long anyway... this is actually Gerek's idea, he can't remember where he 
got it, but thinks it might even be a period method?? 
 

*


This is actually a time honored method from god knows when. When I worked for 
the British shop head on a film, she made us flatline things by hand...running 
a basting stitch right along the traced lines on the flatlining material. This 
really keeps the fabric in place but also you now have a completely removable 
line that shows up on both sides. It's a great way to mark fabric... if you 
have the time.






 
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-12 Thread Ann Catelli
The construction chalk line works wonderfully.
I have used it for c.1300 garments out of modern 60" width fabric, where the 
panel from hem to hem is much longer than any straight edge I own.

And if you have invested in a little Clover chalk marker, get the chalk refill 
for the construction sort.  It's less expensive & gives much more chalk.

Ann in CT

---  stils...@netspace.net.au wrote:

> Not on fabric but it works well on building sites,
> 
> -C.
> 
> > 
> > My idea to mark the placement of these lines involves a chalk line
> > snapped against the silk that can then be marked with a disappearing
> > Anyone done anything like this on fabric?



  
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-12 Thread Patricia Dunham
If you're still worried about the chalk line lasting, you could run a 
basting thread along the chalk line...  the couched cord will cover 
any holes from the basting, and if you use a fine needle, the holes 
won't last long anyway... this is actually Gerek's idea, he can't 
remember where he got it, but thinks it might even be a period 
method??


chimene


Alexandria Doyle wrote:


My idea to mark the placement of these lines involves a chalk line
snapped against the silk that can then be marked with a disapearing
marker so they last until I get to that section of the 7 inch by 5
yards piece.   I can use a cork board with a grid marked and pins to
get the lines at the proper angle.  What I'm wondering is about
chalking the string.  Would rubbing a piece of chalk against the
string between "snaps" be enough to have enough chalk to transfer?


Yes, but there's another way you might like better. Instead of a 
string, I use a firm (not bendable) ruler with a sharp edge. Metal, 
wood, or very hard thin plastic work well. (For large projects, I 
use a wooden yardstick that has nice crisp corners on the long 
edge.) Rub cheap classroom chalk (white or a color) along the edge. 
Place the ruler, on its edge, on the fabric where you want the line, 
and slide it back and forth a couple of times in the direction of 
the line. The chalk transfers in a nice clean line. I wouldn't even 
bother using fabric marker -- just carefully roll up the marked 
fabric, and unroll it as you need it. Before you roll, you might 
cover it with a thin strip of extra fabric to keep the excess chalk 
from transferring to the back of your working fabric.


--Robin
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-12 Thread stilskin
Not on fabric but it works well on building sites,

-C.

> 
> My idea to mark the placement of these lines involves a chalk line
> snapped against the silk that can then be marked with a disapearing
> Anyone done anything like this on fabric?




This email was sent from Netspace Webmail: http://www.netspace.net.au

___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-12 Thread Robin Netherton

Alexandria Doyle wrote:


My idea to mark the placement of these lines involves a chalk line
snapped against the silk that can then be marked with a disapearing
marker so they last until I get to that section of the 7 inch by 5
yards piece.   I can use a cork board with a grid marked and pins to
get the lines at the proper angle.  What I'm wondering is about
chalking the string.  Would rubbing a piece of chalk against the
string between "snaps" be enough to have enough chalk to transfer?


Yes, but there's another way you might like better. Instead of a string, I use 
a firm (not bendable) ruler with a sharp edge. Metal, wood, or very hard thin 
plastic work well. (For large projects, I use a wooden yardstick that has nice 
crisp corners on the long edge.) Rub cheap classroom chalk (white or a color) 
along the edge. Place the ruler, on its edge, on the fabric where you want the 
line, and slide it back and forth a couple of times in the direction of the 
line. The chalk transfers in a nice clean line. I wouldn't even bother using 
fabric marker -- just carefully roll up the marked fabric, and unroll it as 
you need it. Before you roll, you might cover it with a thin strip of extra 
fabric to keep the excess chalk from transferring to the back of your working 
fabric.


--Robin
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


Re: [h-cost] Chalking a line

2010-01-12 Thread Sharon Collier
It should be. I do this all the time when building and I've done it on
muslin flats. Run your string over a large-ish piece of cheap chalk; you
don't want "good" chalk that doesn't make dust, you want that dust.

-Original Message-
From: h-costume-boun...@indra.com [mailto:h-costume-boun...@indra.com] On
Behalf Of Alexandria Doyle
Sent: Tuesday, January 12, 2010 8:30 AM
To: Historical Costume
Subject: [h-cost] Chalking a line

For my current project I need to couch a silk cord in a geometric pattern on
to silk fabric.  Most of the lines will be at a straight 45 degree angle.  I
will be doing this by hand as well.

My idea to mark the placement of these lines involves a chalk line snapped
against the silk that can then be marked with a disapearing marker so they
last until I get to that section of the 7 inch by 5
yards piece.   I can use a cork board with a grid marked and pins to
get the lines at the proper angle.  What I'm wondering is about chalking the
string.  Would rubbing a piece of chalk against the string between "snaps"
be enough to have enough chalk to transfer?
Anyone done anything like this on fabric?

alex

--
So much to do and so little attention span to get it done with.
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume

___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume


[h-cost] Chalking a line

2010-01-12 Thread Alexandria Doyle
For my current project I need to couch a silk cord in a geometric
pattern on to silk fabric.  Most of the lines will be at a straight 45
degree angle.  I will be doing this by hand as well.

My idea to mark the placement of these lines involves a chalk line
snapped against the silk that can then be marked with a disapearing
marker so they last until I get to that section of the 7 inch by 5
yards piece.   I can use a cork board with a grid marked and pins to
get the lines at the proper angle.  What I'm wondering is about
chalking the string.  Would rubbing a piece of chalk against the
string between "snaps" be enough to have enough chalk to transfer?
Anyone done anything like this on fabric?

alex

-- 
So much to do and so little attention span to get it done with…
___
h-costume mailing list
h-costume@mail.indra.com
http://mail.indra.com/mailman/listinfo/h-costume