Re: [H] Beep codes
Have also been there for that too. I even called a friend one time in a like situation as I knew he had a board I could use to confirm a problem like that! Technology? What you gonna do! > Date: Sat, 5 Jul 2008 17:33:40 -0400 > From: [EMAIL PROTECTED] > To: hardware@hardwaregroup.com > Subject: Re: [H] Beep codes > > Especially when I don't have the spare parts to swap out so I can > confirm that's the only problem :( > > --- > Brian > > On Sat, Jul 5, 2008 at 4:27 PM, Harvey Best <[EMAIL PROTECTED]> wrote: > > I know what you mean! :( > > > > > > > >> Date: Sat, 5 Jul 2008 13:49:08 -0400 > >> From: [EMAIL PROTECTED] > >> To: hardware@hardwaregroup.com > >> Subject: Re: [H] Beep codes > >> > >> Figures. > >> > >> I hate the RMA process :( > >> > >> --- > >> Brian > >> > >> On Sat, Jul 5, 2008 at 12:51 PM, Harvey Best <[EMAIL PROTECTED]> wrote: > >> > 1 long, 2 short > >> > Indicates a video error has occurred and the BIOS cannot > >> > initialize the video screen > >> > to display any additional information > >> > > >> >CH000607 > >> > > >> > > >> >> Date: Sat, 5 Jul 2008 11:57:29 -0400 > >> >> From: [EMAIL PROTECTED] > >> >> To: hardware@hardwaregroup.com > >> >> Subject: [H] Beep codes > >> >> > >> >> 1 long + 2 short and no POST = dead video? Happening with my new > >> >> Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a > >> >> month or so using the onboard video. > >> >> > >> >> Tried putting in a PCIe video card but the only spare I have uses an > >> >> aux power connector from the 4-pin molex and when I plug it in the > >> >> system won't boot. Think the PSU (300W) is not beefy enough. Without > >> >> the aux power the system boots but still gives the 1 long + 2 short > >> >> beep and no POST. > >> >> > >> >> > >> >> Brian > >> > > >> > _ > >> > The i'm Talkaton. Can 30-days of conversation change the world? > >> > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_ChangeWorld > > > > _ > > Use video conversation to talk face-to-face with Windows Live Messenger. > > http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008 _ Need to know now? Get instant answers with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_messenger_072008
Re: [H] AHCI vs SATA support on ICH9R controller
Replying to my own post with additional info... I have done further investigation of this problem and have come to the conclusion that you can't hot swap if you select RAID in the bios. Even though RAID is supposed to be a superset of AHCI, I have not found a way to hot swap the "single" drives attached to the ICH9R controller. Running the Intel Matrix Storage Manager indicates the single drives are using NCQ, but they do not show up in the "safely remove hardware" control. I have googled the problem and keep coming up with posts regarding changing to AHCI to enable hot-swap or people with the same problem as I have. Lots of answers saying IT SHOULD be hot swappable according to Intel's website, but no one who actually claims to be able to do it. Selecting RAID in the bios (I have the OS installed on a SATA RAID attached to the ICH9R, so RAID is the required selection and you don't seem to be able to select individually which channels are RAID and which non-RAID) makes the drives attached not hot-swappable. Is anyone actually running a P35 chipset with RAID and non-RAID drives that has been able to enable hot swap with the ICH9R controller? I have several drives in drive bays I would like to be able to swap, although it is not imperative. It was a no-brainer with an nForce4 chipset. All attached SATA drives were hot swappable, INCLUDING the OS drive(s). All the official Intel websites indicate that the drives should be hot-swappable, but I have yet to find anyone who says they have actually done in or found a tweak in the BIOS to allow hot-swapping. This question has gotten under my skin now, and I would like to find a definitive answer. I would be glad to hear from anyone who has one. Thanks, Jim Maki [EMAIL PROTECTED] > -Original Message- > From: James Maki > So, it SHOULD [be hot swappable]... > > -Original Message- > > From: maccrawj > > > http://www.intel.com/support/chipsets/imst/sb/cs-012308.htm > > http://www.intel.com/support/chipsets/imsm/sb/CS-022304.htm > > > > This one seems to suggest RAID mode is RAID + AHCI: > > > > http://www.intel.com/support/chipsets/imst/sb/cs-015988.htm > >
Re: [H] Beep codes
Especially when I don't have the spare parts to swap out so I can confirm that's the only problem :( --- Brian On Sat, Jul 5, 2008 at 4:27 PM, Harvey Best <[EMAIL PROTECTED]> wrote: > I know what you mean! :( > > > >> Date: Sat, 5 Jul 2008 13:49:08 -0400 >> From: [EMAIL PROTECTED] >> To: hardware@hardwaregroup.com >> Subject: Re: [H] Beep codes >> >> Figures. >> >> I hate the RMA process :( >> >> --- >> Brian >> >> On Sat, Jul 5, 2008 at 12:51 PM, Harvey Best <[EMAIL PROTECTED]> wrote: >> > 1 long, 2 short >> > Indicates a video error has occurred and the BIOS cannot >> > initialize the video screen >> > to display any additional information >> > >> >CH000607 >> > >> > >> >> Date: Sat, 5 Jul 2008 11:57:29 -0400 >> >> From: [EMAIL PROTECTED] >> >> To: hardware@hardwaregroup.com >> >> Subject: [H] Beep codes >> >> >> >> 1 long + 2 short and no POST = dead video? Happening with my new >> >> Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a >> >> month or so using the onboard video. >> >> >> >> Tried putting in a PCIe video card but the only spare I have uses an >> >> aux power connector from the 4-pin molex and when I plug it in the >> >> system won't boot. Think the PSU (300W) is not beefy enough. Without >> >> the aux power the system boots but still gives the 1 long + 2 short >> >> beep and no POST. >> >> >> >> >> >> Brian >> > >> > _ >> > The i'm Talkaton. Can 30-days of conversation change the world? >> > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_ChangeWorld > > _ > Use video conversation to talk face-to-face with Windows Live Messenger. > http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008
Re: [H] Beep codes
I know what you mean! :( > Date: Sat, 5 Jul 2008 13:49:08 -0400 > From: [EMAIL PROTECTED] > To: hardware@hardwaregroup.com > Subject: Re: [H] Beep codes > > Figures. > > I hate the RMA process :( > > --- > Brian > > On Sat, Jul 5, 2008 at 12:51 PM, Harvey Best <[EMAIL PROTECTED]> wrote: > > 1 long, 2 short > > Indicates a video error has occurred and the BIOS cannot > > initialize the video screen > > to display any additional information > > > >CH000607 > > > > > >> Date: Sat, 5 Jul 2008 11:57:29 -0400 > >> From: [EMAIL PROTECTED] > >> To: hardware@hardwaregroup.com > >> Subject: [H] Beep codes > >> > >> 1 long + 2 short and no POST = dead video? Happening with my new > >> Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a > >> month or so using the onboard video. > >> > >> Tried putting in a PCIe video card but the only spare I have uses an > >> aux power connector from the 4-pin molex and when I plug it in the > >> system won't boot. Think the PSU (300W) is not beefy enough. Without > >> the aux power the system boots but still gives the 1 long + 2 short > >> beep and no POST. > >> > >> > >> Brian > > > > _ > > The i'm Talkaton. Can 30-days of conversation change the world? > > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_ChangeWorld _ Use video conversation to talk face-to-face with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008
Re: [H] Beep codes
Figures. I hate the RMA process :( --- Brian On Sat, Jul 5, 2008 at 12:51 PM, Harvey Best <[EMAIL PROTECTED]> wrote: > 1 long, 2 short > Indicates a video error has occurred and the BIOS cannot > initialize the video screen > to display any additional information > >CH000607 > > >> Date: Sat, 5 Jul 2008 11:57:29 -0400 >> From: [EMAIL PROTECTED] >> To: hardware@hardwaregroup.com >> Subject: [H] Beep codes >> >> 1 long + 2 short and no POST = dead video? Happening with my new >> Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a >> month or so using the onboard video. >> >> Tried putting in a PCIe video card but the only spare I have uses an >> aux power connector from the 4-pin molex and when I plug it in the >> system won't boot. Think the PSU (300W) is not beefy enough. Without >> the aux power the system boots but still gives the 1 long + 2 short >> beep and no POST. >> >> >> Brian > > _ > The i'm Talkaton. Can 30-days of conversation change the world? > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_ChangeWorld
Re: [H] Beep codes
1 long, 2 short Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information CH000607 > Date: Sat, 5 Jul 2008 11:57:29 -0400 > From: [EMAIL PROTECTED] > To: hardware@hardwaregroup.com > Subject: [H] Beep codes > > 1 long + 2 short and no POST = dead video? Happening with my new > Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a > month or so using the onboard video. > > Tried putting in a PCIe video card but the only spare I have uses an > aux power connector from the 4-pin molex and when I plug it in the > system won't boot. Think the PSU (300W) is not beefy enough. Without > the aux power the system boots but still gives the 1 long + 2 short > beep and no POST. > > > Brian _ The i’m Talkaton. Can 30-days of conversation change the world? http://www.imtalkathon.com/?source=EML_WLH_Talkathon_ChangeWorld
[H] Win2K Server OS?
I am rebuilding my win2KServer OS. I just rcvd the magic 25-digit key. I entered it and now I am at a screen asking about Licensing Modes. IIRC, the original server install was for 5 Clients and 25 concurrent connection. Should I change the [ 5 ] to [25]?? The window is default with ATM: Per Server. Number of concurrent connections [ 5 ] Each connection must have its own Client Access License (?CAL?) < > Per Seat. Each computer must have its own Client Access License (?CAL?) To avoid violation of the License Agreement, use Licensing (which is located in Administrative Tools) to record the number of Client Access Licenses purchased. Thanks much. Yes, I am digging in my W2K Server book also... Best, Duncan
[H] Beep codes
1 long + 2 short and no POST = dead video? Happening with my new Gigabyte GA-MA78GM-S2H 780G mobo. Had been working just fine for a month or so using the onboard video. Tried putting in a PCIe video card but the only spare I have uses an aux power connector from the 4-pin molex and when I plug it in the system won't boot. Think the PSU (300W) is not beefy enough. Without the aux power the system boots but still gives the 1 long + 2 short beep and no POST. Brian
[H] Hardware
http://steampunkworkshop.com/ enjoy, al
Re: [H] Vista install lacking boot files
I found a BIOS update for my mobo and applied i t, then reset the CMOS on the PC. Now the problem is even worse - it hangs for several minutes on a blank screen after the DMI update and then loads Vista. Once it gets past that it works fine. I've hit the boot drive with every HD utility I can think of and it all check out just fine. But I might just replace it anyways and see if that helps. --- Brian On Sat, Jul 5, 2008 at 8:00 AM, mark.dodge <[EMAIL PROTECTED]> wrote: > If you have tried boot ini and MBR fixes then it would seem to me that there > is something in the BIOS knackered to not boot from the HD. > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brian Weeden > Sent: Sunday, June 29, 2008 5:25 AM > To: hardware@hardwaregroup.com > Subject: Re: [H] Vista install lacking boot files > > Okay this problem has returned. Vista crapped out on me after only a month > and I needed to do a fresh reinstall (kept rebooting everytime a DVD was > inserted or locking up every 15 min). So this time I pulled my RAID card > and only had my boot drive attachced when I installed. But on reboot it > stopped at the "loading DMI" part of the boot process again unless I put the > Vista install DVD in the drive. Then it would load Vista no prob. > > I installed the EasyBCD proggie linked to this thread and tried just about > every option, including "write MBR" and "recreate missing/deleted boot > files". > > This is the readout from EasyBCD: > > Windows Boot Manager > > identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} > device partition=C: > description Windows Boot Manager > locale en-US > inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} > default {7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} > displayorder{7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} > toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} > timeout 30 > > Windows Boot Loader > --- > identifier {7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} > device partition=C: > path\Windows\system32\winload.exe > description Microsoft Windows Vista > locale en-US > inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} > bootdebug Yes > osdevicepartition=C: > systemroot \Windows > resumeobject{7cb80d1f-458b-11dd-af8d-aa046b8ac7f2} > nx OptIn > pae ForceDisable > sos No > debug No > > Partition C is the correct drive to boot from. I think the problem is that > the bootloader itself is not being called after POST, which is why it's > hanging at the DMI screen. Again, I did a complete re-install so the > problem isn't a second hard drive. > > Any suggestions? Honestly, I can't believe that Vista has this sort of > problem and I can't believe I haven't heard more people bitching about it. > While I have run into the XP "no boot device found" error due to having the > wrong driver or messed up boot.ini path, it was at least fixable with the > tools provided by Windows and was easy to avoid. > > > Brian > > On Tue, May 27, 2008 at 2:25 PM, Alex <[EMAIL PROTECTED]> wrote: > >> yes it's a common problem. quite irritating. >> >> http://neosmart.net/dl.php?id=1 >> Grab EasyBCD and re-write the MBR to your hard drive. >> >> >> On Tue, 27 May 2008 14:11:01 -0400, Brian Weeden wrote >> > Just installed my first Vista system (Ultimate, using it for my HTPC) >> > and have a weird problem. The install process never copied over >> > the boot files - the system will not boot unless the install DVD is >> > in the drive. Otherwise it just hangs at the DMI screen after the >> > BIOS post. I nuked it and did a second install and the same problem >> > happened. >> > >> > I don't know anything about Vista - is this a common problem? What's >> > the fix? With an XP system I would normally just copy over ntldr >> > and make sure the boot.ini file is correct but I don't see those >> > anywhere on the Vista system. >> > >> > >> > Brian >> >> > No virus found in this incoming message. > Checked by AVG. > Version: 8.0.101 / Virus Database: 270.4.3/1524 - Release Date: 6/28/2008 > 7:42 PM > >
Re: [H] Vista install lacking boot files
If you have tried boot ini and MBR fixes then it would seem to me that there is something in the BIOS knackered to not boot from the HD. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Weeden Sent: Sunday, June 29, 2008 5:25 AM To: hardware@hardwaregroup.com Subject: Re: [H] Vista install lacking boot files Okay this problem has returned. Vista crapped out on me after only a month and I needed to do a fresh reinstall (kept rebooting everytime a DVD was inserted or locking up every 15 min). So this time I pulled my RAID card and only had my boot drive attachced when I installed. But on reboot it stopped at the "loading DMI" part of the boot process again unless I put the Vista install DVD in the drive. Then it would load Vista no prob. I installed the EasyBCD proggie linked to this thread and tried just about every option, including "write MBR" and "recreate missing/deleted boot files". This is the readout from EasyBCD: Windows Boot Manager identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=C: description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} displayorder{7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 30 Windows Boot Loader --- identifier {7cb80d1e-458b-11dd-af8d-aa046b8ac7f2} device partition=C: path\Windows\system32\winload.exe description Microsoft Windows Vista locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} bootdebug Yes osdevicepartition=C: systemroot \Windows resumeobject{7cb80d1f-458b-11dd-af8d-aa046b8ac7f2} nx OptIn pae ForceDisable sos No debug No Partition C is the correct drive to boot from. I think the problem is that the bootloader itself is not being called after POST, which is why it's hanging at the DMI screen. Again, I did a complete re-install so the problem isn't a second hard drive. Any suggestions? Honestly, I can't believe that Vista has this sort of problem and I can't believe I haven't heard more people bitching about it. While I have run into the XP "no boot device found" error due to having the wrong driver or messed up boot.ini path, it was at least fixable with the tools provided by Windows and was easy to avoid. Brian On Tue, May 27, 2008 at 2:25 PM, Alex <[EMAIL PROTECTED]> wrote: > yes it's a common problem. quite irritating. > > http://neosmart.net/dl.php?id=1 > Grab EasyBCD and re-write the MBR to your hard drive. > > > On Tue, 27 May 2008 14:11:01 -0400, Brian Weeden wrote > > Just installed my first Vista system (Ultimate, using it for my HTPC) > > and have a weird problem. The install process never copied over > > the boot files - the system will not boot unless the install DVD is > > in the drive. Otherwise it just hangs at the DMI screen after the > > BIOS post. I nuked it and did a second install and the same problem > > happened. > > > > I don't know anything about Vista - is this a common problem? What's > > the fix? With an XP system I would normally just copy over ntldr > > and make sure the boot.ini file is correct but I don't see those > > anywhere on the Vista system. > > > > > > Brian > > No virus found in this incoming message. Checked by AVG. Version: 8.0.101 / Virus Database: 270.4.3/1524 - Release Date: 6/28/2008 7:42 PM